Ubuntu Networking :: Wireless Not Working Sitecom WL-344?
Jun 20, 2010
I'm running ubuntu 10.04 with the sitecom wl-344 USB wireless networking dongle. I read that the device should work with the rt2800usb driver however I get this error in the terminal:
Code:
michael@michael-desktop:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 004: ID 046d:c71c Logitech, Inc.
[Code]...
View 6 Replies
ADVERTISEMENT
Apr 4, 2010
I've just installed Ubuntu (Koala) on an old (but worthy) Toshiba laptop. It's got a Sitecom WL-140 wireless card. (BTW I'm new to Ubuntu, but an old hand at Solaris). Can't get the card to work, although I think It's nearly there. nm-tool shows driver is p54pci. The activity light shows an orange light occasionally. State is disconnected. I'm not really sure whether I should be using the supplied driver (p54pci) or the Windows driver for this card and ndiswrapper. I've installed the Windows driver with ndiswrapper thinking this may fix it but no.
ndiswrapper -l says wlancig: driver installed and device (1260:3886) present.
View 1 Replies
View Related
Nov 21, 2010
how to use the Sitecom WL-324 usb stick with ubuntu (10.10)? (It works with windows.)
lsusb | grep Ralink
Code:
Bus 002 Device 004: ID 148f:2878 Ralink Technology, Corp.Im using Ubuntu 10.10 x64 with a Phenom(tm) II X6 System My results so far:
sudo modprobe rt2870sta (or rt2800usb)
result (rt2870sta) :
lsmod | grep rt28
Code:
rt2870sta 445182 0
crc_ccitt 1699 1 rt2870sta
dmesg
[code]....
View 9 Replies
View Related
Jan 1, 2010
I am trying to get the above wireless adapter o work with Ubuntu. I have installed ndiswrapper but I am unsure what windows driver I need that will work with it.
When I type lsusb I get the following: Bus 001 Device 002: ID 0df6:0042 Sitecom Europe B.V.
I tried searching the ndiswraper site but all I could find was Sitecom WL-344 300N X2 Wireless USB Adapter that pointed me to Driver: rt2870.inf and rt2870.sys (on Windows XP).
I am not sure if this will work or where to download these files, so I was wondering if anyone else has this adapter that could shed some light onto how to get it working.
Edit: I just tried the rt2870 driver and it didnt work
View 1 Replies
View Related
Mar 15, 2011
I am new to ubuntu, installed 10.10 on dell 250n. I am trying to use a Sitecom WL-011v2 wireless PC card.
View 3 Replies
View Related
Jul 16, 2011
I bought myself a Sitecom Wireless Network USB Micro Adapter 300N X3 (Sitecom WL-364) today. When I place the adapter in my PC, it is not recognised as a wireless adapter.
There are similar posts like this one, most of them are about conflicting drivers. According to this post I shouldn't be worried about that (as I'm working in 11.04 32-bit).
The output of lsusb is this:
Code:
Bus 001 Device 003: ID 0df6:0051 Sitecom Europe B.V.
Also, I was having a hard time getting to know the chipset of the adapter. Is RT2870 the right driver for the adapter?
View 1 Replies
View Related
Nov 15, 2010
The only connection to internet I have is via usb adaptor sitecom WL-352, under windows XP. Now I installed Ubuntu 10.10, and I cannot connect to internet via wireless. How can I do to use this adaptor?
View 4 Replies
View Related
Jan 9, 2011
you can add this device to rt3070sta...ID 0df6:0040 Sitecom Europe B.V. Full work with 3070sta and the old original kernel but don't work with the kernel head and NICOK sta driver
View 5 Replies
View Related
Aug 20, 2010
Unable to connect to wireless network at home. The wireless network is visible. Password is requested. But no connection established.
hardware:
desktop, ubuntu 10.04
PCI card: sitecom wireless nework cardbus card 300N
chipset: ralink RT2800 802.11n PCI
iwconfig wlan0: RT2860 wireless, nickname: rt2860sta
I tried using ndiswrapper. Conclusion: 'driver already installed'.
The wireless network does connect on my laptop with ubuntu 10.04 installed. Distance to modem: 3 feet.
View 2 Replies
View Related
Jul 21, 2010
I want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
View 9 Replies
View Related
Jul 13, 2011
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
View 1 Replies
View Related
Mar 18, 2011
For some reason, i just cannot get my wireless to work in xubuntu. When i click on the network-manager applet, it only has the wired network tab and VPN connections, there are NO wireless networks displayed. I have also tried iwconfig, which returned
lo no wireless extensions.
eth0 no wireless extensions.
and lspci:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
[Code]...
View 1 Replies
View Related
Jul 18, 2011
I can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g
[Code]....
View 9 Replies
View Related
Feb 16, 2011
I have a compaq nc6400 with the intel Pro/Wireless 3945 ABG card. It fails to find any wireless networks.the IWL3945 driver was installed automaticallyBut when searching for networks none are found, even though on any other computer in the house the network is found.According to https://help.ubuntu.com/community/Ha...sIntel#miniPCI
View 9 Replies
View Related
Jul 8, 2011
I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[code]....
View 9 Replies
View Related
Mar 20, 2011
i just installed Gosalia mad monkey on an old dell d520 latitude but cant get wireless working? i found how to set up my wireless connection butits asking for the default keyring password to unlock?i never set a password for this as it never askedi found this but i still dont understandit states" Typed in all the details, clicked Add and... �Enter password for default keyring to unlock�. Huh? I didn't set that... Tried the root password, tried the user password, none worked. The answer: Gosalia's team remastered Ubuntu with their password locking the keyring. Quite a funny situation. "
View 1 Replies
View Related
Jun 23, 2011
Just upgraded to the newest version of Ubuntu(unity), and my wireless isn't working. I have the 14e4:4315 Wireless Card so I followed this posts [URL].... And still have no wifi, when I click the icon in the menu bar it says under "Wireless Networks": "wireless is disabled by hardware switch", which ins't true because on my Vostro 1520, there is only one switch and it is in the on position. I've tried 3 versions of ubuntu and none of them work with wifi getting tired of it.
View 9 Replies
View Related
Feb 21, 2010
Quote:
kai@kai-laptop:~$ lspci | grep -i net
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
0a:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
I see no wireless networks under network manager, I did BEFORE the update.
View 1 Replies
View Related
May 17, 2010
I am fairly new at this so bear with me.I'm having difficultynnecting to wireless.Sometimes it works fine and sometimes it can't find any networks
View 1 Replies
View Related
May 17, 2010
In the wake of a spate of posts complaining that wireless is not working in 10.04 here is mine. I'm on a (relatively old) AMD Duron 1.5Ghz, 1.5G memory with a VIA KM-266 motherboard. Wireless worked fine in 9.10. With a fresh install of the new 10.04, the usb wireless adapter is not detected, the tab to add a new wireless connection is grayed out, starting the KNetworkManager (did I got the name right?) does nothing (that is, no application starts), etc.note: if you are wondering how I am accessing the internet, I just fired up the 9.10 live CD, which as you can imagine is not the most practical thing in the world.Here is the info. The commands lsusb and lspci spit the following:
Code:
grodrigues@grodrigues-desktop:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
View 1 Replies
View Related
Jan 10, 2011
I was having the same problem described in this thread,[url] so I installed the required package from this website,[url] Now I am getting this error:
I don't have internet access on that machine until I can get the wireless to work so I can't use the software center.
View 2 Replies
View Related
May 7, 2011
I just upgraded to Ubuntu 10.4.2. The wireless worked perfectly in 9.04, but did not not work at all in 9.10, and now 10.4.2. I'm running a Planex USB wireless dongle on an ancient ShuttleXPC SN41G (circa 2003) - the wireless dongle is an XLink Kai GW-USMini2N. I'm connected right now on the Shuttle via Ethernet cable, but would really like to get the wireless up and running again. Here's all the info I could get as per the pinned topic instructions:
Code:
maddoktor2@ShuttleX:~$ lspci
00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev a2)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev a2)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev a2)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev a2)
[Code].....
View 9 Replies
View Related
Jun 17, 2011
I have installed 10.10 a few weeks ago and was able to have a wired internet connection without problems. However I haven' been able to get my wireless to work. Here are the commands I tried which might give a clue to what's wrong to someone helpful... From reading other post, I think the gateway is missing but I am not able to set it up properly...
Code:
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
[Code]....
View 9 Replies
View Related
Aug 6, 2011
I installed ubuntu 10.04 in my laptop hp 620 and wired connection is working but wireless is not working at all. I checked the old posts and when I enter the command "iwconfig" it shows the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA"
Mode: Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thrff Fragment thrff
Link Quality=10/100 Signal level:0 dBm Noise level:-87 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I read in the older posts that the "Access Point: Not-Associated" should be "Access Point: Invalid" and the command that is used for this purpose is " sudo iwconfig wlan0 ap auto"
and it did work-but for sometime, and again it showed me "not associated" when I restarted.
View 3 Replies
View Related
Mar 16, 2010
Previously I have had Linux installed on my laptop (OpenSUSE, Ubuntu) with no problems as far as wireless networking in concerned. Due to wanting to play a certain game (which I have since grown tired of), I reinstalled Windows 7 Ultimate 64-bit. Recently I have booted up to live DVDs of PC-BSD, Ubuntu, Kubuntu, and OpenSUSE 11.2 and I cannot get wireless networking working.
At home I use WPA2 Personal. I put in the passphrase into NetworkManager (the same as I do for Windows), and the computer gets an IP address from the router (I use 10.3.5.x at home). The problem is, I cannot connect to the Internets. If I do "ping -c 3 cnet.com" it gives me the proper response of 216.239.113.101, but if I try to go to cnet.com, I get a page cannot be displayed in Firefox.
I get this error for every website. I don't understand it seeing that I can ping the websites, but even if I put the IP address in the URL, it still doesn't load the page. What am I doing wrong? Everything is dynamic, as in Win7. But everything works perfectly in Windows, but no such luck in Linux. I know it must be something simple, but I'm at a loss. Seeing that I no longer play Star Trek Online, I'd like to put Linux or BSD back on my laptop, but no Internet is not an option.
View 14 Replies
View Related
Jan 10, 2010
I've bought an RALINK getnet Wireless USB adapter and am trying to get it to work on a dual boot pc running XP and 9.10. According to the forums and the manufacturers website (www.getnet.com.tw), this should be supported in Linux.
Using the disk that came with it, I have gotten it to work in Windows. I've spent nearly a day scouring the Ubuntu forums and trying different things, but still haven't got it working in 9.10. (I think that most of my confusion is that many of the threads are for earlier versions)
If I type "iwconfig", I get this:
Code:
graeme@graeme-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
[Code].....
I have the CD that has a LINUX directory, but am not sure what to do with it. Through other threads I have determined that my drivers are rt2870.sys and .inf and have downloaded these. I'm not really sure what to do with them next..... Many threads talk about going System>Administration>Networking, but I don't have this as an option. I have however got an option which I downloaded called "Windows Wireless Drivers" which seemed to let me load the rt2870.inf driver, but then says "No" after it (not very helpful).
I have enabled Wireless Networking, and added my SSID etc etc, but I still don't connect.
View 6 Replies
View Related
Jan 11, 2010
I spent days trying to figure out how to get my atheros AR928x 802.11n wireless card to work in Ubuntu. The card worked perfect in Windows 7 but the connection kept dropping in Ubuntu. It would find my router and connect with 60% signal for about 5 seconds, then fall down to about 25% signal and then cut out altogether. After searching for days to find a solution, I finally figured it out and figured Id post it here to let everyone else in the same boat have a working wireless too!
I found this solution from:[URL].. This solution is for JAUNTY (Ubuntu 9.04), so if you are running Jaunty, you can just follow that post. If you are using Karmic (Ubuntu 9.1), you can follow this tutorial I'm posting. It's pretty simple: First, make sure you got all your files up to date. Type in a terminal:
sudo apt-get update Let that run, and once its done, type into terminal:
sudo apt-get upgrade
Once that finished, restart your computer. Again open up terminal and type:
sudo apt-get install linux-backports-modules-karmic
If you are using Jaunty, instead of karmic type in jaunty, if you use another version of ubuntu, you can find a list of versions and their names here:[URL].. Restart your computer one more time, and you should be good to go! This has been tested and confirmed to work on: -Ubuntu 9.1(karmic) with an Atheros 928x 802.11n wireless card, using the Ubuntu installed network software, in a Gateway NV53 laptop connected to a belkin 802.11n wireless router.-HP base station / 802.11g airport express
This has been tested and does not work/has issues with:
-airport extreme I hope this works for you too, and if it does, please let me know with your hardware and Ubuntu version so I can post here what other setups have been confirmed to let this work.
View 9 Replies
View Related
Jan 31, 2010
Wireless not working. get that to work?
View 2 Replies
View Related
Feb 1, 2010
Have spent 6-8 hours trying to get the darn wireless to work. Started on Network Manager, switched to WICD, then back to Network manager. Have uninstalled and reinstalled driver a dozen times. When I go to System->Administration->Windows Wireless Drivers, get pop-up saying "Unable to see if hardware is present" When I click "OK" then network driver window says "Hardware present: Yes" and the driver is listed.First time user of Linux, and getting frustrated.I really want this to work so I can become as smart as all of you reading this post.
bret@novus-laptop:~$ sudo lshw -c network
[sudo] password for bret:
*-network UNCLAIMED
[code]....
View 3 Replies
View Related
Feb 5, 2010
I am trying to get the RT2860 card in an Eee PC 1000 to work. I have tried Ubuntu 8.04 and 9.10, all the "fixes" below I can find on the web but nothing seems to work.
[URL] I downloaded the source code from Ralink and using module-assistant followed the instructions.
I can see the wireless network, it tries to connect but just keeps asking for the security key. I have tried WEP, WPA and no security at all but still no go. All works fine if wired. The F2 toggle seems to work OK, the WLAN is switched on in the BIOS. The "iwconfig" command shows the RT2860 in Ubuntu 9.10 but not in Ubuntu 8.04.
View 2 Replies
View Related
