I'm dual booting BT4 and Ubuntu 9.10. My question is, rather than me having two separate partitions for this, could I just put BT4 in VMware and still be able to detect wireless networks from it? Just out of curiosity, does VMware machines have the capability of detecting wireless networks just like the host OS?
View 4 RepliesFirst time ever switching from windows. Mainly doing this cause I though it would be fun to learn a new OS and see how it is.From watching a few videos it looked like all I have to do is click on the wifi logo at the top of the screen and I would get my router and a bunch of others (does this on windows) but when I click on it I dont get anything. I think it might be that im running this on a laptop. My wifi card is: Standard Dell Wireless 1501 802.11 g/nIts a new dell inspiron 5000 laptop i customized a little with more ram and a new video card.
Im guessing I will need to provide more info but as I said at the start Im new to this and not sure how or what info I would need to provide. Please just tell me how I can get any data you need and il get right on it. (I used Wubi to install this, went off without a hitch)
I just installed Lenny and I was getting settled in. The wireless didn't work, but I have this USB adapter and was going to use it as a stop-gap measure until I get the real wireless going, especially since I could use that connection for downloading, forum search, etc.However, the USB adapter isn't working either. It seems to detect the adapter itself, since the "appendage" that appears on the right-click menu appears, but there's no detected networks. I have Jaunty dual booting with Lenny, and I know both the network and the USB adapter are working, since I'm on the Ubuntu side using both right now
View 14 Replies View RelatedI would hope that the title gives my problem away, but my wireless card is not detecting networks. I'm a total new guy to the Linux world, so please be patient with me. I currently have Ubuntu 9.10 installed on a stock Toshiba Satellite L505D-S5965.
zeus@olympia:~$ lsb_release -d
Description: Ubuntu 9.10
zeus@olympia:~$ uname -mr
2.6.31-20-generic i686
zeus@olympia:~$ lspci -nn | grep -i wireless
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller [10ec:8199] (rev 22)
[Code]...
I recently installed Ubuntu Netbook Remix on my Dell Inspiron Mini 10, and for some reason it isn't detecting any wireless networks. The wireless works perfectly fine when I boot to Windows XP on the netbook, but not when I'm using Ubuntu. I tried troubleshooting using this htmlAt the "check for device recognition" step, the terminal tells me that it's disabled, but as far as I can tell there isn't a physical switch that allows me to turn the wireless on or off, and again, it works perfectly fine when I use XP. What should I do?
View 9 Replies View RelatedI'm running fedora 13 but I'm having issues with the wireless connection, I can see all the networks in the area but when I try to connect it does not seem to accept the wep key.Its a Belkin receiver, could do with a little help as this is such a pain. I'm using a pc.---------- Post added at 05:24 AM GMT ---------- Previous post was at 04:59 AM GMT ----------This maybe some use but I don't know much about it.
[Barry@localhost ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:8B:90:19:01
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
I am porting the kernel on my hardware board...dmesg shows that...
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address aaaa
[code]....
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
I have a fairly standard home network set-up with a router and a couple machines on the internal network (with private IP addresses 10.0.0.x). One of these machines is running my subversion server, which is in turn used by my laptop. I am now trying to configure my laptop in a way that I can have one working subversion copy connected to the repository which works both when the laptop is connected to my home network as well as if its connecting from internet. I configured a "virtual server" on the router, so that port 443 goes to the machine with subversion, and this works fine. Now I don't know how to configure the laptop to go to the same machine - because the IP is different if I want to access it from outside and from inside. I tried to connect to the external IP of my network, but the router refuses to let the connection go "out and in again". how to get it configured?
I am using Debian linux with wpa_supplicant on the laptop.
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View RelatedDecided to have a bit of a clean, and moved the computers out the way (unplugged and stuff) to hoover up and that around the floor, but not the inside of the computers.
Now ive put everything back together, my main pc with linux on doesn't detect the wireless card.
I turned it off, then checked the card hadnt been knocked out. It did appear to be, so i put it back in properly, and it still wont detect the card. (its basically a pcie card with an antenna sticking out the back).
Not detecting wireless network
View 1 Replies View RelatedI installed ubuntu 10.10 and it is not automatically detecting the wireless connection and showing message firmware missing. how to connect to wireless. I installed on the laptop.
View 6 Replies View RelatedI'm having a new problem with my wireless. It's detecting the network, but it won't connect. My Verizon card says it's WEP, but the WICD has three WEP options and none of them connect. What troubleshooting can I do?
View 2 Replies View Relatedim dual-booting Ubuntu on my computer with windows 7. When I use windows the internet works fine, however when i switch over to Ubuntu and click on network manager no wireless networks appear.
View 5 Replies View RelatedI've read through the stickied thread about troubleshooting my wireless and I've made it to step IV 'Making a connection.'I installed the firmware that my BCM4306 required, then tried 'sudo usr/sbin/iwlist scan'
View 2 Replies View RelatedI have a wireless network at home. My home laptop connects without any issue.I have a wireless network at work. My work laptop connects without any issue.If I take my work laptop home, it can see the network but cannot connect to it. I've checked the passphrase and that's fine, I've deleted the network from the Network Manager profile and re-created it - no luck.
The only thing I can think of is that I had to change the wireless router network channel at one point. I think that the work PC could access the network before that (but it was a while ago). I've tried changing the channel back, but to no avail. I have to keep the channel at its new setting anyway to avoid a loss of signal.What sort of things should I be checking/changing to get home connectivity on my work PC? The wired network is fine, but my wife draws the line at me looming over her desk with a red cable plugged into the back of my laptop.
Even thought my Westel Model 7500 has the appropriate green lines (Power, Wireless, DSL, Internet), it always takes my Ubuntu 9.04, Dell Inspiron 1545n considerable effort to connect to the wireless network. Please note that I am using WPA security and MAC filtering.Below is the series of events, spanning about 10 minutes every time I boot up the laptop.1. Tries to connect wirelessly automatically.2. Pop-up appears with SSID and password in dots.3. Tries to connect wirelessly4. Pp-up appears with SSID and password in dots.5. Tries to connect wirelessly6. Pop-up appears with SSID and password in dots.7.Tries to connect wirelessly then says "[SSID Name] now disconnected"At this point I manually connect to wireless and after 45 seconds it says "[SSID Name] now connected"
View 5 Replies View RelatedThe only connection to internet I have is via usb adaptor sitecom WL-352, under windows XP. Now I installed Ubuntu 10.10, and I cannot connect to internet via wireless. How can I do to use this adaptor?
View 4 Replies View RelatedIt is detecting the wireless networks in the surrounding area but it isn't connecting.
View 11 Replies View RelatedI have installed debian 5 on my laptop: hp 6730s.even though Iam new to linux but i feel everything is working fine except that my wireless interface is not detected by debian!!I have a builtin wireless interface of broadcomm 802.11go install the driver ??I am new to linux thus i dont know much about it
View 8 Replies View RelatedMy wireless card isent detecting my router even though it has detected my 3 of neighbors wifi. the only reason i thought that it may not be able to detect mine is that i use a wpa2 encrption rather then a wep like my neighbors. so i tried to go and reset my router using my other desktop and set it to a wep encryption, but for some reason my computer still did not detect it. i am using a dell dimension comnputer with both a linkseys N gigabit router model number :wrt310n and the reciving card linkseysduel band wireless N network adapter model number :wusb600n. can somebody please tell my what i am doing wrong? this is rather annoying as i have to drag my desktop and moniter out to the living room just to physically connect to my router to enable internet.
View 1 Replies View RelatedI am using Ubuntu 8.04 and when I open up my network settings, It shows my ethernet card and my modem but my wireless card doesn't show up. Under "Hardware Drivers" it says that my driver for my wireless card is a "proprietary driver" and that there is no driver I can get for it for Linux. Is there any way that I can get my wireless card to work? I tried going to the HP website and downloading a driver for it, but all of the drivers only work for Windows....
View 2 Replies View RelatedMy C++ program must be able to detect EVERY Wireless Network Interfaces under Linux operating system and display the interface names on the screen.How can my application achieve this?Is there any sample codes?Is there any third party libraries can do this?Notes: The detected wireless network interfaces should also include the virtual interfaces, like the one created by Aircrack-NG's Airmon-NG script.
View 1 Replies View RelatedI click the little icon (I think it's called Network Management?) to selct my home wireless network and it's doesn't show ANY wireless networks what so ever
View 9 Replies View RelatedI am using fedora 14 on lenovo laptops and android 1.6 I created a wireless network on my laptop with create a wireless network. But it was not detected by my android 1.6 phone. Same wireless network created on my MacbookPro is detected by the phone.
View 2 Replies View RelatedI have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back
the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
i have a printer with a wireless connection and a router with wireless capabilities can i use it some how?
View 3 Replies View Relatedjust downloaded ubuntu 10.10. I have a dell inspiron 1501. How do I search and connect to wireless networks?
View 4 Replies View Related