Debian :: Check For Loaded Modules?

Sep 25, 2010

Howto check from the command line which modules were loaded after Lenny restart?

View 2 Replies


ADVERTISEMENT

Debian Hardware :: Kernel Modules - Four Drivers Loaded For Video Card

Mar 10, 2011

0 down vote favorite
share [fb] share [tw]
This is the problem I run lspci -v which checks all drivers on my system and more. It says kernel driver in use is nouveau. Then under that it says kernel modules: nvidia recent, nvidia-96, nouveau, nvidiafb. So what it looks like I have 3-4 drivers for my video card loaded and one, nouveau, being used. I think they conflict with each other.

I'm trying to add drivers other then nouveau, because the mouse freezes with it. At this point I can't seem to get rid of nouveau, I go to terminal and type:
sudo apt-get --purge remove xserver-xorg-video-nouveau
And it says that it's not loaded so I can't dump it. lspci-v says nouveau is the driver being used and trying to dump it. It says it isn't installed. I'm confused. I want to dump nouveau, what should I do? I also go into Synaptic package manager and it isn't listed as being installed.

View 1 Replies View Related

Debian Configuration :: How To Check Version Of Loaded Intel Microcode

May 2, 2010

Because the version of the microcode installed by the package intel-microcode in Testing (2009-03-30) is way older than the one currently offered by Intel (2010-02-09), I only installed the package microcode.ctl and let it fetch the microcode. However, after reading the Read Me files, manual pages and system logs, and checking the directory where the microcode is stored, I have not been able to find an option to check the version of the microcode in use.

This is the output of update-intel-microcode:
Local version:
Remote version:
could not extract the actual data of remote microcode

View 2 Replies View Related

General :: Kernel Modules Are Not Getting Loaded?

Nov 28, 2010

I recently updated the kernel from SLES 11 to SLES 11 SP1 .However my kernel modules are not getting loaded and they throw an error such as shown below:"Errornserting mii : Unknown symbol in module, or unknown parameter (see dmesg)"

View 8 Replies View Related

Ubuntu :: Blacklisted Modules Still Get Loaded At Boot?

Oct 23, 2010

I'm trying to prevent a few modules from loading at boot, like i.e. bluetooth, sco, bnep, btusb, usb_storage and uvcvideo, so I blacklisted them in /etc/modprobe.d/blacklist.conf but they still get loaded. I've checked that I unload all of the ones depending on eachother so that shouldn't be the problem, I think. Does anyone know what I'm supposed to do to really prevent them from loading?

View 2 Replies View Related

Slackware :: Modules Being Loaded At Boot Time?

Jun 1, 2011

I just installed slack 13.37. I was poking around a little and I noticed that I have all these modules loaded... yet when I open up /etc/rc.d/rc.modules almost everything is commented out. how are these modules being loaded at boot time?

View 4 Replies View Related

Ubuntu Installation :: Load The Same Modules In The Upgraded 9.04 As Are Loaded By The Live CD?

May 5, 2010

I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.

When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.

Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.

View 1 Replies View Related

General :: Loaded Kernel Modules On Virtual Server And CSF Confusion

Dec 24, 2010

what is happening on my Centos virtual server (ps I'm having a great time re-learning Linux after a large gap and usually try and find out myself but this has me confused) First thing I did was install Tomcat and try and change the port to 80 using iptables -nat and it complained a kernel module was missing. Instead setup Apache to redirect requests so that's now working I then tried to install CSF firewall and the validation perl script returned fatal errors so I assumed OK my virtual server Kernel is restricted and used denyhosts instead which is working great

Here's the confusion.. I later retried the csftest script and it now works including all the iptables and nat stuff that fataled before. I've not rebooted or changed anything except run denyhosts and the postgres daemon + ended a few daemons that I didn't need (eg pickup,tlsmgr,courier,postfix,qmgr,saslauthd) Running lsmod returns nothing and /proc/modules is zero bytes so I'm not able to tell what is loaded? I'm tempted to try and get Tomcat redirecting via iptables and see what happens but if it works I don't like that something seems to have changed.. before I ran it direct as root now I'm SU into root from another login

View 1 Replies View Related

Ubuntu :: VMware Can't Work - Window Says - Several Modules Must Be Compiled And Loaded Into The Running Kernel?

Nov 25, 2010

I have installed VMware (VMware-Player-3.0.1-227600.x86_64.bundle) on my laptop. When I open Vmware from Applications/System Tools/VMware Player.I get a window that says: VMware Kernel Module Updater Before you can run VMware, several modules must be compiled and loaded into the running kernel.When I click on install and after putting in my passwd.a window comes up with a list:

Compiling:
Virtual Machine Monitor
Virtual Network Device
VMware Blocking Filesystem
Virtual Machine Communication Interface
VMCI Sockets

But it just try the first one and show an error (window) that says.unable to build kernel module see log file /tmp/vmware-root/setup-9572.log for details.I cannot even go into the folder vmware-root because it says I do not have permissions even though am an administrator.

View 9 Replies View Related

OpenSUSE Wireless :: Cannot Find Map File. No Module Symbols Loaded - Kernel Modules Not Enabled

Aug 3, 2010

Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:

Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg

[code]....

Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.

attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]

[code]....

View 1 Replies View Related

Networking :: Check Older Iptable Rules That Were Loaded?

Oct 14, 2010

Is there a way to check older iptable rules that were loaded? I accidentally overwrote my iptables and that has killed internet access to all computers in the intranet. I must have accidentally deleted some line in the iptable rules and cannot figure how to get it back to how it was. I am using Debian 5.05 by the way.

View 1 Replies View Related

Ubuntu :: Check All Installed Modules In System?

Mar 31, 2011

1) How to check all installed modules in Ubuntu?
2) How to check whether I installed a specific module or not? For example, uhci_hcd ?
3) How to install a specific module?

View 1 Replies View Related

General :: Check Modinfo Of Installed Modules?

Apr 8, 2011

I have a doubt, suppose i have a module having different versions.I have installed one of these module, now i want to check module info of installed module, Is there any way to check it

View 2 Replies View Related

General :: Check Which Apache Modules Are Enabled/installed?

May 17, 2011

which is the most elegant way to check which apache modules are enabled?

View 3 Replies View Related

Ubuntu Servers :: Check The Installed Apache2 Modules?

May 1, 2010

I am trying change the MaxClients parameter for apache2 on ubuntu. I looked in apache2.conf and there are two instances where MaxClients is mentioned.

<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150

[Code]....

View 2 Replies View Related

Fedora :: Check If Machine Have The Kernel-modules To Mount NTFS?

Dec 14, 2009

how can I check if my machine have the kernel-modules to mount NTFS? Running FC12

View 2 Replies View Related

OpenSUSE :: VMWare Workstation 7 Error "Before You Can Run Vmware, Several Modules Must Be Compiled And Loaded Into The Running Kernel"

Sep 21, 2010

im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:

[Code]..

When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:

[Code]...

View 9 Replies View Related

Debian :: Migration Check List - To Check - Prepare Or Reconfigure

Feb 3, 2010

I am new to Debian but not Linux-based systems. I have been experimenting a lot with Debian Lenny/Squeeze. I am growing more comfortable each day with the Debian design. Yet there remain many unexplored areas. I am creating a migration check list. Things to check, prepare, or reconfigure when moving from one Linux-based system to Debian.

I have a good computer background and my current check list probably is fairly good. Yet I would appreciate input and opinions from experienced Debian users of things to watch in such a migration. Login defs, passwd/group files, different directory locations, keymaps, services and daemons, etc. I am not too concerned with the desktop as I plan to stick with KDE 3.5 for a while and I can basically move those settings across.

View 4 Replies View Related

General :: FATAL: Could Not Load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No Such File Or Directory

Mar 6, 2011

I want set up VPN on my VPS but when i try to turn on tun/tap i see:

:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)

View 1 Replies View Related

Debian :: Trying Out Squeeze / Configuration Could Not Be Loaded

Dec 14, 2010

A couple days ago I installed Debian Lenny (netinst) to my friend's laptop, a IBM Thinkpad T23. Got a black screen after gdm loaded and the laptop seemed frozen. Decided to upgrade to squeeze. I edited the apt sources file and changed all the instances of lenny to squeeze, and then upgraded.Had the same display problem, but found a web site that suggested disabling acpi. So I did that, got the sound working, (needed cs46xx firmware), and all seems to be running fine.I get some weird udev messages at boot time, but I have a feeling that's due to how I upgraded. I can't copy and paste since the messages aren't in my system log. If anybody wants more information about it, I can supply it. pgrep shows two instances of udev running so it appears the messages are only warnings.When upgrading to squeeze, I used tds.net debian mirror links. Earlier today I switched to Debian's official US repo URLs and had to upgrade about 250 packages after reloading package data.

Now, when I click on System -> Administration -> Time and Date.After a couple seconds I get a dialog box that says "The configuration data could not be loaded" in bold black letters. Underneath that in smaller letters, "You are not allowed to access the system configuration" I receive that same error when accessing "services" and "users and groups."But I can access the synaptic package manager and update manager from the administration submenu.

View 4 Replies View Related

Debian :: Save On CD D/loaded Programs For Later Installs?

Apr 17, 2011

On top of the what's installed from the Debian 6.01 live CD I add the secuirty updates and a small number of programs (Audacity, OpenShot, AbiWord, get_iplayer, ripit and SMPlayer). Because at present while in a phase of distro-hopping I tend to fiddle a bit with new distros and reinstall them more often than spend time undoing a more complex mess, can the added programs be stored so that they don't need to be downloaded again,o the dependencies complicate this or make it impossible? I'm imagining hopefully some folder of .deb files that exist after downloading that I can put on a CD for repeated use. Sorry if I'm being naive.

If this can be done, a jargon-free set of steps would be much appreciated. I use Mobile Broadband with a low monthly limit so it will help. Though I forget the method now, I did once when using Linux Mint use some 'script' that would enable me to put programs on a CD to download at my parents' home when I had no internet, but it was hit and miss it seemed, with missing dependencies galore.

View 3 Replies View Related

Debian Installation :: NVidia Drivers Not Being Loaded

Sep 2, 2014

When I tried to rescue an old laptop that kept crashing (turned out to be HDD failure), a problem with the graphics quickly revealed itself. A graphical install was already impossible, and it looked like the image was starting halfway and wrapping around the screen, together with all kinds of artefacts. It's hard to describe, but impossible to work with. I did notice that all was okay when I booted into GParted live in the safe graphics mode (vga=normal).By the way, the system specs: AMD Turion64, NVidia 7150M.

When I had succesfully installed Debian using the normal non-graphical installer, the same effects showed up as soon as Nouveau was loaded, so I SSH'd into it to uninstall them and install the proprietary NVidia drivers. After purging nouveau and rebooting, the effects were gone! It clearly was a Nouveau issue. However, after I installed NVidia drivers successfully (X also started fine), I wanted to change the resolution using nvidia-settings which prompted:

"You do not appear to be using NVIDIA X driver. Please edit you X configuration file (just run nvidia-xconfig as root), and restart the X server."

View 2 Replies View Related

Debian Configuration :: Why Isn't Pciehp Loaded By Default

Jul 28, 2010

I run Debian Squeeze on my Lenovo ThinkPad W500. Today I tried to use the expresscard slot on the device and was disappointed to find that it didn't work. A bit of digging revealed that the pciehp module was not loaded (but is required for hot-plugging these kinds of devices).Can anyone explain to me why this is the case? All other hardware on my system has had the module auto-loaded on boot-up, but why not pciehp for my expresscard slot?

View 2 Replies View Related

Debian :: Configuration Could Not Be Loaded - Access Not Allowed

Apr 17, 2010

I have recently installed Debian 504 AMD64, when I try to access "System" --> "Administration" --> "Users and groups" logged in as root, I get the following message:
"The configuration could not be loaded. You are not allowed to access the system configuration."
The system does not even ask for a password and the result is the same if I log in as a normal user.

I have installed from a single ISO DVD downloaded from the internet and read the DVDs of my previous Debian distro to install packages not included on DVD 1 of Debian 504 although I do not think this unusual approach can have any effect on the installation. I suspect I'll have to boot in single user mode but I have never done any troubleshooting at the command line.
(/etc/passwd and /etc shadow look OK).

View 3 Replies View Related

General :: Rc.modules Not Loading Modules At Startup?

May 11, 2010

I've been trying to load my pcmcia network card driver "xirc2ps_cs" at startup with no success. I have added "modprobe xirc2ps_cs" to the rc.modules file but it doesn't load at startup. Curiously, though, if I execute rc.modules AFTER the machine has booted it will load the modules just fine. Just not during the boot up process. Thinking that hotstart might have been causing problems I've disabled hotstart (chmod -x) temporarilly to remove it from the picture, but there was no change.

View 5 Replies View Related

Debian Configuration :: System | Administration | Services = Could Not Be Loaded?

May 26, 2010

Debian 2.6.32 Squeeze + GnomeI try to start System | Administration | Services and I get an error:The configuration could not be loadedAn unknown error occurredI turned on a whole bunch of different services and suddenly now I can't get back in to switch any of these on or off. I'm assuming there is some manual way of switching these off again, I just don't know where to do this.

View 3 Replies View Related

Debian Configuration :: Sysctl.conf Not Loaded At Boot

Aug 12, 2011

My sysctl.conf in /etc isn't loaded at boot, it does however get parsed with the command # sysctl -p I believe this problem started when I got the 3.0.0 kernel just a few days ago. Does everyone has this problem? Then it's probably a bug.

My system:

Debian Testing (Wheezy)
3.0.0-1-amd64
up2date

View 12 Replies View Related

Debian :: Can't Login To MySQL - Plugin Unix Socket Is Not Loaded

Jul 23, 2015

I just switched form MySQL to MariaDB for my WordPress website which is run with Apache, but I had a little problem logging in. So, I backed up all of my databases, deleted all of MySQL's configuration files, and reinstalled MariaDB. However, now I'm completely unable to login to MariaDB.

Whenever I try to, it says: ERROR 1524 (HY000): Plugin 'unix_socket' is not loaded.

Also, why didn't MariaDB ask me to set up a password during the installation process like MySQL does?

View 8 Replies View Related

Debian :: Squd3 Proxy Server - HTTP Pages Not Loaded

Oct 2, 2015

I want to start using squd3 as proxy server for one of my network 192.168.6.0/24

I was try using some configurations but http pages not loaded.

View 0 Replies View Related

Debian :: How To Find Out Mounted Devices Loaded At Boot Time

Apr 20, 2010

I am trying to find out the command to list all the devices mounted at boot-time.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved