I would like to download an already upgraded Ubuntu Live-CD or upgraded alternate CD iso-image. Like an Ubuntu Hardy with all the package and safety upgrades up till now so that I don't need to upgrade with a network connection.Particularly the last two LTSs:
Hardy Heron and a Lucid Lynx
I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.
When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.
Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.
I am trying to download the cds (not live cd) usually 5 in nos for fc15...But I cant seem to find the link for the same. I dont have a DVD burner.
View 9 Replies View RelatedI have a USB which I want to use for a 'live' debian OS. I have debian 7.7 on hard disk and will be using Unetbootin to transfer the .iso file onto the USB.
However, when I go the debian archive there are so many iso files for the particular debian pkg [URL] .... There's iso, iso.contents, iso.log, iso.packages and iso.zsync. Do I download all of these iso files?
I'll be doing a Code: Select allsha256sums <iso-filename> to make sure the downloads aren't corrupted. But when I use Unetbootin and get it to write the main .iso file onto USB, do I then repeat this process with all the other iso files for the OS?
I searched but couldn't find this specific error. I'm using a Toshiba with Windows7 and a new 2 gb USB.
Fedora-13-i686-Live.iso selected
Verifying filesystem...
Verifying SHA256 checksum of LiveCD image...
Error: The SHA1 of your Live CD is invalid. You can run this program with the --noverify argument to bypass this verification check.
I have tried to download the latest XFCE Live CD 8.3.0 i386 both by HTTP & torrent & have tried the same at various mirrors but the download consistently fails.
View 1 Replies View RelatedI have a Dell Inspiron 1420 laptop running on Windows 7, I just download the iso file for Fedora 14 desktop edition, the live media download, and burned it to a new CD-RW, I can't seem to locate the file I need to boot it.
View 11 Replies View RelatedI would like to download an already upgraded Ubuntu Live-CD or upgraded alternate CD iso-image. Like an Ubuntu Hardy with all the package and safety upgrades up till now so that I don't need to upgrade with a network connection.Particularly the last two LTSs:Hardy Heron and a Lucid LynxDoes anyone know if it is possible?[URL]
View 9 Replies View RelatedHow do i download and run live android in ubuntu.
View 3 Replies View RelatedI hear that the non-live version of F15 has an option to choose the btrfs filesystem. I only see the DVD version as a non-live version and it's 3.4 Gigs. Is there a non-live CD version available?
View 3 Replies View RelatedIs there a live link out there were one can download MythtvOS.
View 1 Replies View RelatedI downloaded and burnt the ISO imagw of Fedora 15 onto a CD. I wanted to try Fedora 15 before installing. So, I booted from the CD. However, in the list of Applications, I do not find Libreoffice Suite. Wil I need to download Libreoffice separately after installing Fedora 15?
View 1 Replies View RelatedI'm trying to download linspire Live. There are 2 download links and both are dead?
View 5 Replies View RelatedHere at home I have several Ubuntu installations, mine, the kids computers and a couple of laptops. What I'm looking for is a solution or a pointer in the right direction to setup on our local Ubuntu server a sort of cache. Each day each Ubuntu on the network, checks for updates and downloads, and installs. What I'm looking for is a way for one machine to download the update and then the others to download from the local resource.
A sort of local cache to try and minimise everyone downloading straight from the net for pretty much the same updates. I did a emerge cache many years ago when I was using Gentoo, so I'm wondering what I can use/do here with Ubuntu as we are all loving this distro now.
I've done a good few ubuntu installations for friends and colleagues and now my Dad wants in on the action. His PC is more than capable of running ubuntu 32 bit BUT I've hit a brick wall I've never come across before. I've burnt a CD image of the 10.04 iso from [URL] on my ubuntu box and for some reason, his PC just won't boot from it. If I select the option to manually select the boot source, all I see is the hardware monitor telling me things like CPU temperature. As for the Live USB - nothing whatsoever. Is it possible that I've managed to corrupt the iso file somehow?
View 3 Replies View RelatedLive CD: I dowloaded the ISO, burned it to CD, booted from this CD. It starts to load and I can see the purple background with the loading icons. Everything seems normal. But instead of ending up with the login screen, it ends up with a screen that says 'Please remove all bootup media and hit ENTER' or something like this. So I hit enter and then it shuts off my computer. That's it.
Live Stick: So I tried another option and created a stick with 'usb-creator.exe' that is on the CD. Then I start from that stick, but all I end up is a line of 'Syslinux bla bla copyright 20xx-2011'. That's it. Then it does nothing anymore. The cursor is blinking, but no prompt or whatsoever and keyboard input doesn't do anything.
Now something weird: When I insert Live CD and Live Stick at the same time and then boot my computer, then it boots into Ubuntu. Obviously it loads the first parts from CD and then the rest from stick. Because when I'm then in Ubuntu and try to format the stick, it says it can't do so, because there's system files from that stick in use.
This is our first time choosing and installing linux. Our other servers are all windows 2008 x64. We were told to install fedora 13. I can only find a download for the desktop version and we're looking for the SERVER x64 download. Could I please get a link?
View 7 Replies View RelatedI upgraded a week ago to ubuntu 10.10 (amd64). I was unable to boot in 2.6.35-22 so I have been using 2.6.32-25. I tried again last night after installing updates to 2.6.35-22. Still no luck.I gave up since this was much like what happened a week ago and I couldn't find any solutions then. (I ran memtest then.)
View 3 Replies View RelatedThe software manager has been nagging me to upgrade from 9.10 to 10.04 for some time now. I finally gave in and clicked on Upgrade. After the upgrade completed, my computer won't start. It just flashes Ubuntu for a split second and goes to a black screen. I happen to have the 10.04 CD from Canonical, and I tried that, and it won't launch the installer either; just a logo and a black screen. Since I can't even get to the terminal to diagnose and fix whatever's wrong, I'm installing 9.10 from the CD that I ordered from Canonical a long time ago. I went through all the graphical options just like the first time I installed 9.10, and it's in the process of installing right now.
I don't really have time to futz with it because I need my laptop for when I go and visit my mum for Thanksgiving. Maybe I'll try after the holidays if I can get some feedback on what might have gone wrong with 10.04.
I've looked in the grub.cfg file, and it has :
Code:
#
### BEGIN /etc/grub.d/30_os-prober ###
[code]....
I have a 10.04 installation upgraded from 9.10 somewhere around the first beta.However, since a couple weeks I have the problem that I cannot use nano anymore.
Code:
mypc:~$ nano
Segmentation fault
I've tried to do apt-get remove nano then installed but stil the same,Even tried apt-get purge but with no avail.
I upgraded 9.10 to 10.04 and now it won't boot. The way 9.10 used to boot was after turning on the computer it would go through the bios screen and then a screen would come up and list both operating systems, Windows Xp and Ubuntu. XP would be highlighted and would normally boot if I did not change the highlighted area. If I changed the highlighted area to Ubuntu it would boot into Ubuntu 9.10. Now after doing the upgrade, it gets to the same screen with the two operating systems listed.
When I change the highlighted to Ubuntu an error message is briefly displayed and then it goes back to the screen that lists both operating systems. I think the error message says something like couldn't find Ubuntu, or something similiar to that. Windows XP runs fine when I highlight Windows XP in that first screen, but I want to be able to run Ubuntu. I have Ubuntu on a secondary drive, but shouldn't it have rewritten the upgraded files on that same drive that had 9.10 on it?
I upgraded the Ubuntu 10.04, and afterwards I can't print. Cups won't detect printers, hp-setup won't, hp-probe won't. Tried rebooting, reinstalling HPLIP, & CUPS. Installed latest version of HPLIP. did a purge of HPLIP and CUPS, and reinstalled, rebooted.
View 4 Replies View RelatedI had upgraded to 10.04 but can not use kernel 2.6.32-22.32+, I had to go back to kernel 2.6.31-21. because of the default video driver had change from the one kernel to the other, and I do not know how the correct it. In 2.6.32-22 the font would change and to a smaller size and I can barely view anything because it looks like some two year old puke a box of crayons all over the screen.
Second issue is it does not matter what power-saving mode I am in, in 5 minutes time it with go into suspension. Or right after coming out of hibernate, it will go into suspension indefinitely and no coming out of it and must to a hard boot.
i just upgraded from 9.10 to 10.04 and now i cant get win xp to boot. win xp will show up on the grub list but when i select it all i get is a blank screen with a cursor flashing in the top left corner. i dunno whats happend, i have never had many problems with dual boot.
View 6 Replies View RelatedUpgraded to MM and it boots, desktop and apps run but cannot access synaptic - gives brief error message. In terminal, ran "sudo apt-get update" and got this message:
Reading package lists... Error!
E: Problem parsing dependency Depends
E: Error occurred while processing gsfonts (NewVersion1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package lists or status file could not be parsed or opened.
While using Ubuntu 10.04 my system worked perfectly, now that I've upgraded via the Upgrade Manager, there is no sound on my system. My computer is very Ubuntu friendly, as I've never had this problem with any other version of Ubuntu. What can I do? If I need to reinstall 10.04, or roll back to 10.04, how do I do that? If I can fix by reinstalling 10.10 how do I do that. I dual boot with Windows 7 Pro and Ubuntu 10.10.
View 1 Replies View RelatedSo I was on 8.04, and I decided to hit the upgrade button on the gui to upgrade to 10.04. Well the upgrade went fine and all...until I rebooted. Now I get this
Starting up .
mount: mounting none on /dev failed: No such device
udevd[984]: error getting socket: Invalid argument
error initializing netlink socket
udevd[984]: error initializing netlink socket
[Code]...
I found some other posts and tried adding the rootdelay=35 and acpi=off but those did not fix it. This is a virtual machine running on VMWare ESXi 4.1.
I have Lubuntu installed on my EEEP 1005HAB. I just successfully upgraded to Naughty Narwhal and it is asking me for my username and password. They don't work. I type my name and password in exactly like I did every time I logged in before, and nothing happens, it just gives me a blank username box again.
View 4 Replies View RelatedAfter upgrading to Ubuntu 11.04 I only get the text mode login. I have a ATI Radeon HD 3600 card and before upgrade I used the propiertary driver (to make the dual screen mode work).I have tried to download the driver again from ATI and installed that but it does not helped.I have put the Xorg.0.log and some other outputs in http://83.251.70.81/X/
View 3 Replies View Related
