Ubuntu Installation :: Kget Window Is Not Opening?
Jul 15, 2010i have downloaded the kget and installed it successfully,it was working but from tomorrow i am not able to open it.i have reinstalled but all in vain
View 9 Repliesi have downloaded the kget and installed it successfully,it was working but from tomorrow i am not able to open it.i have reinstalled but all in vain
View 9 Replieshow to make a program open in a window, much like the -w command you can put in a launcher under gnome. Alternatively if someone could guide me on how to install gnome in lubuntu i could just give that a try too..
View 1 Replies View RelatedI like to alias my firefox commands so I can open up mutiple pages at once. This works great. firefox [URL]
But if I have firefox already up and running it will open as tabs of the firefox I already have running. How can I open the multiple pages in a new window in this case?
- Using -no-remote could work, but I would have to make a whole different firefox profile for each set of pages, not really a solution. - Also tried setting it to a particular display and it opened as a tab again. ie. firefox [URL] -display=":0.0"
In Pidgin browser preferences, it's set to open in new tabs. But when I click on a link in IM, it opens in a new window instead. Is this because I use Google Chrome in the Incognito (Private Browsing)?
View 1 Replies View RelatedWhile trying to other machine through GUI, after asking password it is not proceding.but I could ssh through command line.CENTOS 5.5
View 2 Replies View RelatedI use firefox3.6.x, and i play online video (sockwave flash) often, but while opening the page (often has swf), the whole X restart, and back to login window of gdm. The problem not accured everytime i open the page, but very often. I met this problem both in ubuntu 9.10 and 10.04, and also lubuntu 10.04. So, i fall back to use firefox 3.5.9, and evrything seems fine.
View 2 Replies View RelatedWhen I VNC into my CentOS server I am always met with the usual GUI and an annoying terminal window. If I try to close the terminal window it reappears immediately. I can only minimize it to the taskbar. Am I missing a simple setting to disable this?
Here is my xstartup file:
#!/bin/sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc
[code]...
I use Mathematica 7.0 through my school's SSH server. This involves:
-loading their font server via "xset fp+ tcp/c1.ucalgary.ca:7100"
-connecting to the SSH server via "ssh -X useruser@servername.ca"
-entering my password Then I choose to run Mathematica via ". use mathematica 7" then to load the GUI "mathematica".
Sometimes, and only sometimes, the screen goes to the error in the attached picture, stays there for about 5 seconds, brings me to the login screen. When I log in again, all of my applications that were running, open folders, and my terminal windows are closed.
In Gnome, I don't like how Deb default GUI navigator opens a new window every time you navigate to a lower level. Results in loads of windows open. How to change this behaviour?
View 1 Replies View RelatedI am using ubuntu 8.04 and has firefox 3.5.15.of late,whenever i open [url] and [url] firefox crashes.also when opening window for changing themes,background firefox crashes.
View 9 Replies View RelatedI am trying to get a download manager ( like IDM in win ) to work in 11.04 64 bit =
1. DTA = no go
2. tucan manager = no go
3. kget = installed but won't run ?
How can i change the link on an ongoing download in kget.like in flash get(windows
View 2 Replies View Relatedunder gnome (OS: ubuntu lucid 10.04) i installed KGet and it was working fine with no problems or ( extra PKGs installation ) ... then i wanted to try KDE desktop so i installed kubuntu-desktop , after that gnome windows and message alerts have been transformed to KDE form even if i was logged with gnome ...
I uninstalled kubuntu-desktop using instructions provided here : [url] but then i lost kget .... now when i try to install it again , synaptic iforms me that i have to install a lot of extra packages as well .. what is the shortest way to install and run KDE program on my gnome desktop properly .. ?
i cant get kget to download bit torrent all it says is stalled?
View 9 Replies View RelatedI was trying to download MOPSLinux from their Russian FTP server, using Firefox-->FlashGot-->KDE-Kget and it kept sitting there for about a minute, then popping up a dialog box asking for a Username & Password to access the FTP site.
I tried the usual anonymous type of login information combinations, to no avail; the box kept reappearing.
Finally for the heck of it, I tried Firefox-->FlashGot-->Wget and presto! It began downloading right away, no questions asked.
This is on Slack64 with the stock KDE installation + the KDE3 compat libs.
Here's the transfer currently going on the Wget window:
Code:
Kernel 2.6.21.5, GNU/Linux (Slackware 12.0)
xfce 4.4
Qt 3.3.8
KDE 3.5.7
KGet v. 0.8.5
I've just installed all of the packages in disks 1 and 2 of the slack 12.0 distro so, among them, I have the slack series kde/ installed. I run xfce as the desktop environment, which is able to run KDE apps. In main menu>Network there is kget, a download manager and also supposedly a p2p client. I ran it and it said "It is the 1st time you run kget. Do you want to make the default download manager?". I replied "No". As nothing happened I restarted X (the startx command ends up running xfce), ran kget again, and it made the same question, which this time I answered in the affirmative.
Again nothing happened. So I tried to download some file from the web, in the hope that a kget window would open. But no window opened nor anything else happened! In the console, I did 'ps -e' and there it was, however. So I began the search for documentation. First I ran khelpcenter, and was presented with the kget help. It was all about menus. However, typing kget --help-all in a console, gives almost two screens of information. And I tried several commands, from the GUI, following the syntax displayed by this command, but it was no use. So, I finally had to fall back on LQ, like so many times.
I have a problem that I'm not sure how best to debug. About every other time when I boot my system, I get a condition where listing the files in /root locks up that xterm session.This can be cleared by opening another xterm window and killing the listing command. This happens on "ls -a", "find", "tar" and I think "stat" also. The locked up xterm echo's chararcters but does not respond to any control sequences. This is new with FC11.This has only been seen to happen for root. And once a system is booted with this problem it seems to persist until you get it booted without the problem.
View 8 Replies View Relatedi am using Fedora 14. Once system get hanged during opening a video file so I had to restart the system by pressing restart button. But after restarting there are few problems appearing like system monitor not opening and Thunder bird opening but not showing any folder including inbox.
---------- Post added at 04:54 AM GMT ---------- Previous post was at 04:42 AM GMT ----------
Looks like SElinux has stopped working
One of the apps I would like to try out is usenext.Selectint the download for the right version (Linux - Suse, Red Hat, Fedora) I get the rpm file.Either opening this straight away or saving then opening it comes back with the following errors:
usenext-5.27-1.i386 requires mono(gdk-sharp) = 2.10.0.0
usenext-5.27-1.i386 requires unrar
usenext-5.27-1.i386 requires mono(glib-sharp) = 2.10.0.0
[code]....
I tried to install DrRacket on my computer, and it's an .sh file. Do any of you know how to go about doing this? I tried Gedit, and it couldn't detect the character encoding.
View 9 Replies View RelatedI have configured Samba+Ldap domain controller in 8.04 server.
In client side i have installed ubuntu 10.04 desktop. i have joined the client to server. i am able to login with domain user. but thunderbird 3.0 is not openning.
localhost not opening php files text editor
View 1 Replies View RelatedInstalled F11 on Ext3 and have no mouse on opening screen. I see someone else posted similar and had an add something to kernel. how to add to kernel or any other fixes out there for this problem. All was fine in F10.
View 6 Replies View RelatedI just installed FC14 on 2 different PCs. It takes over 40 seconds for either of them to open some webpages, ie amazons home page. It is not my internet connection. I can open the same webpage on both my Windows PCs in less than 5 seconds. I was using FC9 up until 1 month ago, and I believe it took about 15 seconds to open amazon, but I never actually timed it. I spend many hours a day on the internet and have used FC for many years. I have been very happy with it. Until now. My PCs are 1.8GHZ single processor and 2.4GHZ dual processor. Do I have to revert back to FC9 to fix this, or use a different distro?
View 4 Replies View RelatedI used to have a dual boot with Windows Vista, 32bit & Ubuntun 10.04, 32 bit, and it worked well. I recently installed Windows 7, 64bit in my PC, and tried to installed ubuntu 10.10, but for some reason Window 7 stops the ubuntu 10.10 installation. Can it possibly be a compatibility issue?
View 5 Replies View RelatedI had a friend load Ubuntu on my PC. Everything work pretty well except i cant use the effects like rain, fire, wobbly window or drag my window into another one of my desktop. My comp has Radeon HD3100 Graphics card in it. Is there any graphics drivers I can dl to make the stuff work.
View 3 Replies View RelatedHow do I move the Window control buttons when the window is in full screen mode? I.e.: I know how to go into gconf-editor:
Code:
gconf-editor --> apps --> metacity --> general --> button layout = ":minimize,maximize,close"
(I've intentionally disabled the menu...)
What I want is my window controls to be on the right side of the window when the window is in full screen mode.
Also I've had an issue with the Unity dockbar glitching out. I can still click on the buttons (i.e. the logout button) but it displays like a nintendo game inserted crooked. Is there a way to 'restart' unity without log out/ log in?
Any one else experienced any glitches with unity auto hiding/showing?
I have asked for a video capturing software before but recommend a GOOD screen recorder where you can select the window/window size the axis and also a good editing software which will render/export into FULL 720p HD
View 2 Replies View Relatedi'm not sure for using the correct channel here but i hope someone out there can answer my little questions. 1st in older version i was able to change the settings of the terminal look as the font color, background color and so on. I was also able to define a default window size of a new terminal window. But since after upgrading to to the first release this year and a complete new installation of the current release Maverick i do not find this option anymore. Is there a way how to set up the terminal default window size?
View 9 Replies View RelatedIf you don't know, users are able to quickly resize windows using the "ALT+MiddleClick" key shortcut/combo. Basically, hold the ALT key, and mouse middle click and hold on a window. Move the mouse around, and it will resize the window for you.
STEPS TO REPRODUCE:
1) Open a single Window.
2) Near the bottom-right-hand corner of the window, ALT+MiddleClick and drag. It should resize. Great. It works.
What Doesn't Work:
Now, the problem arises when you have multiple windows open on the desktop, they are "layered". i.e. you might have several windows open "behind" the one currently "up front". Example:
If I try to ALT+MiddleClick the "foreground window", it rarely actually resizes THAT window, and instead jumps one of the windows from behind to the front, and resizes that one instead!
STEPS TO REPRODUCE:
1) Open 3x gnome-terminal windows and say some nautilus window. Place them overtop one another. (like the above image)
2) Try to ALT+MiddleClick the foreground window.
3) Repeat this always trying to grab the foreground window.
For me, the window manager seems to bring some window from the background to the front! Desktop Recording of the Problem: [URL]
Running:
* Ubuntu 10.10
* compiz window manager (the problem does not occur with metacity)
* ATI Radeon RV770 (HD4870) w/ open source Radeon Driver (same problem w/ fglrx driver)
* Versions: [URL]