Slackware :: KGet In XFCE4 - StartX Command Ends Up
Jan 31, 2011
Kernel 2.6.21.5, GNU/Linux (Slackware 12.0)
xfce 4.4
Qt 3.3.8
KDE 3.5.7
KGet v. 0.8.5
I've just installed all of the packages in disks 1 and 2 of the slack 12.0 distro so, among them, I have the slack series kde/ installed. I run xfce as the desktop environment, which is able to run KDE apps. In main menu>Network there is kget, a download manager and also supposedly a p2p client. I ran it and it said "It is the 1st time you run kget. Do you want to make the default download manager?". I replied "No". As nothing happened I restarted X (the startx command ends up running xfce), ran kget again, and it made the same question, which this time I answered in the affirmative.
Again nothing happened. So I tried to download some file from the web, in the hope that a kget window would open. But no window opened nor anything else happened! In the console, I did 'ps -e' and there it was, however. So I began the search for documentation. First I ran khelpcenter, and was presented with the kget help. It was all about menus. However, typing kget --help-all in a console, gives almost two screens of information. And I tried several commands, from the GUI, following the syntax displayed by this command, but it was no use. So, I finally had to fall back on LQ, like so many times.
View 7 Replies
ADVERTISEMENT
Jul 23, 2011
when i use the command startx my slackware goes to kde but when use X deos not. what is X command or whow i can make my X open kde with it
View 10 Replies
View Related
Apr 8, 2010
I would like to know what is the file I need to edit to change the "startx" command from starting kde. I would like for it to start gnome instead. I just cant seem to find it. I'm using slackware 13.0.
View 12 Replies
View Related
Aug 24, 2010
I installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.
View 14 Replies
View Related
Jan 4, 2010
slackware and am infact running Vector Linux which is slackware based. I used to use fedora on my old laptop got a new on and tried vector. The mouse on the new one doesn't seem to want to work properly, it jumps alot and usually ends up at the end of the screen unable to move, however does manage to click almost every icon on the screen and change desktops.A USB mouse works fine its just the touchpad.It's a Zoostorm Freedom and I can't even find the windows drivers for it let alone what i need for this. I tried editing the xorg.conf to stop the tab button, which doesn't do anything, installed the latest synaptics and still nothing, tried using what someone else uses and still nothing, I cant even find out what kind of mouse it is!?
View 1 Replies
View Related
Apr 10, 2010
I'm using Slackware 13 with xfce4. The problem is that I've messed something with the xfce4 and now I want to reinstall it. Does "removepkg xfce4" will do the trick ?
View 7 Replies
View Related
Jan 16, 2010
I just installed p7zip with GUI from slackbuilds, but there is a problem, since i can't get it to work with XFCE4. After looking into package, i noticed that .desktop files are installed into:
Code:
/usr/share/apps/konqueror/servicemenus
there are total of 6 .desktop items:
Code:
ls -l /usr/share/apps/konqueror/servicemenus/
total 24
-rw-r--r-- 1 root root 952 2010-01-16 15:12 p7zip_compress.desktop
-rw-r--r-- 1 root root 949 2010-01-16 15:12 p7zip_compress2.desktop
[code]....
and if i look inside of one of these files, the syntax is quite KDE specific and are probably supposed to be seen in a menu when you right click on file. So the big question is: is it possible to make XFCE4/Thunar do something similar? So far i have tried to view p7zip_extract_to.desktop file in a text editor and i learned, that the command for this looks like this:
Code:
p7zipForFilemanager xd %U
And if I right click on archive and then select "Open With Another Application" and then input this command, then double click on archive, i get this nice pop up:
7zip.png
Which is fine for extracting, but when it comes to creating archives, it's a bit inconvenient to do this every time i need something archived. I would would really like to have 7zip menu when i right click on file, so i welcome ideas on this matter.
View 1 Replies
View Related
May 9, 2010
First and foremost please give me your opinions on what I want/should to do for security. I would like to set up my system sp that the session times out and requires a password to unlock the screen. Also I would like a firewall and maybe virus detection just in case. I want to set up a guest user with minimal to no privileges. How should I go about doing this?
View 14 Replies
View Related
May 22, 2011
I'm giving Slackware a try Again.. But How can i upgrade xfce to xfce4.8?
View 2 Replies
View Related
Jul 16, 2011
Upgraded from 13.1. Certain panel plugins seem to be gone in XFCE4.
When I try to add the Icon Box, Task List or several others to the panel, I get "Could not open 'iconbox' module".
There is an iconbox module in /usr/lib/xfce4/panel-plugins, along with some others, but they all date back to 3/29. In /usr/share/xfce4/panel-plugins, there is a mix of newer and older files.
Did the icon box go away? Do I need to nuke ~/.config/xfce4?
View 14 Replies
View Related
Feb 15, 2011
Is it possible to show the output of a command in xfce4-panel? Like you would do with Conky.The Xfce battery monitor consistently uses a bit of my CPU so I wish to run "acpi" (and work out a clever way to just show the percentage) every 5 or 10 minutes in the panel.
View 5 Replies
View Related
Oct 17, 2010
I noticed that there is a 1.0.1 version of xfce4-power-manager, so I tried it out last night. Note: It requires libxfce4ui >= 4.7. I compiled it using the same SlackBuild script as the one in Slackware 13.1. It compiled and installed just fine. However, when I logged out of XFCE and logged back in, I could only set a few options, and battery options were completely non-existant.
I double-checked, and my user account in in the power group. Has anyone else had a similar problem? In the meantime, I've downgraded back to the 0.8.5 version that Slackware ships with.
View 3 Replies
View Related
Apr 16, 2011
I'm trying to build and install a package from source. I thought xfce4-systemload-plugin would be neat to have. I found the link to the source at http://goodies.xfce.org/projects/pan...temload-plugin. I struggled all the way through making the package and installing the package using "installpkg". When I try to add the plugin to my panel I don't see it in the "Add New Items" window as I expected.
View 2 Replies
View Related
Mar 10, 2010
My xfce4-screenshooter GUI has the option Copy to the Clipboard, but I could not find this option in its' cI'm trying to bind printscreen key with this. I know that in order for the option to work I need to have the application always running (in GUI thre is option Close the application after screenshot , again somenthing that I can not find in command line).
View 9 Replies
View Related
Sep 13, 2010
i've added a user using
useradd turf passwd turf and so on.. after loggin, i can't startx..
View 5 Replies
View Related
Apr 28, 2011
I did a fresh install of Slackware64 13.37. All went well. I download the latest Ati video drivers, 11.4, and build the slackware package. Install, and run aticonfig --initial all good. But when I run startx I only get a black screen
View 13 Replies
View Related
Mar 3, 2010
I'm running Slackware current, and just did a slackpkg upgrade. I can't startx. I get the following:
FATAL: Error inserting i915 (/lib/modules/2.6.33-smp/kernel/drivers/gpu/drm/i915/i915.ko): Invalid module format
(EE) intel(0): No kernel mode setting driver detected.
(EE) Screen(s) found, but none have a usable configuration
View 14 Replies
View Related
Jun 25, 2011
I'm using Slackware64 13.37 with Robby's Xfce 4.8 build on a laptop with two batteries. I've noticed that when the charge for one battery is depleted, the empty battery icon for the xfce4-power-manager panel applet is displayed as an "image missing" icon (see the attachments for screenshots of how this progresses).
Is this just down to a missing image, or is it more subtle than that? Has anyone else had the same problem, and if so how did you fix it? So far I've tried clearing the GTK+ icon cache and reinstalling the hicolor icon theme package as suggested in other threads in this forum, but nothing changed.
View 5 Replies
View Related
Aug 2, 2010
Slackware 13.1, on a Dell... Opliplex GX260... running XFCE4, as root. Stuff runs fine. However, the monitor goes to powersave mode after 10 minutes of inactivity. I've turned off power management in the kernel, in the app., have checked the xorg.conf, checked everywhere I can think of, can't find where this is being set. how I can turn this off?
View 12 Replies
View Related
Jun 23, 2011
ive used ubuntu and fedora before, but i asked around for the "best" linux distro and they told me slackware or archlinux so i desided to pick slackware ive installed it and when im in the console mode its the swedish keyboard settings, that i choose in the install but when i go into visual mode startx i dont have the swedish keyboard so i was wondering if eny of you know how to change it
View 3 Replies
View Related
Jan 28, 2010
Thing is : I have an Install DVD created from current with the script from AlienBob about two months ago, I use it as my "default" Slackware64 13 install.
I had my drivers working ( KO modules loaded in kernel 2.6.29.6 ) I had to build for Broadcom Wireless and Nvidia GPU. Today I decided to make an upgrade w slackpkg, blacklisted kernel kernel headers, and everything pertaining to it. Still the damn thing installed 2.6.32.x. anyway, ran lilo to take notice of the change, and rebooted. booted allright, only when i Init 4, it failed to startx. new kernel, new mods needed to be loaded, i picked my DVD with drivers, and tried to run the Nvidia proprietary installer...
It uninstalled the previous driver and started compiling a new kernel module..I had the previous DVD installer of Slackware64 Current, as well as my private repo of packages, either built by me with src2pkg or makepkg, or from slackbuilds, I had my /home partition mounted apart, so i regenerated my system in about one hour...
View 5 Replies
View Related
May 27, 2010
Just installed Slack-13.1 and it looks really good. At least as root. Problem is, I create a normal user, and when I log in as the user, startx just gives me a black screen.
View 2 Replies
View Related
Jan 14, 2010
Having slackware 13 after executing startx it gives me white screen. Heres log:
Code:
kephald starting up
XRANDR error base: 159
RRInput mask is set!!
RandRScreen::loadSettings - adding mode: 59 1024 x 768
RandRScreen::loadSettings - adding mode: 60 800 x 600
RandRScreen::loadSettings - adding mode: 61 640 x 480
RandRScreen::loadSettings - adding crtc: 57
RandRScreen::loadSettings - adding output: 58
Setting CRTC 57 on output "VGA" (previous 0 )
CRTC outputs: (58)
Output name: "VGA" .....
ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error)
"akonadiserver" crashed too often and will not be restarted!
No battery found.
This is not a laptop, quitting ...
<unknown program name>(26219)/: Communication problem with "korgac" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." "
QProcess: Destroyed while process is still running.
Graphic card is intel 82865g
Video driver installed is 2.9.0 from robby workman,
Kernel is 2.6.32.3 generic
View 9 Replies
View Related
Jan 27, 2010
I recently installed Slackware 13. But every time I run startx I get my XFCE screen & it hangs up. Command line works absolutely fine.
View 6 Replies
View Related
May 30, 2010
i can't use kde because the startx and xorgsetup commands are not found (from root account). i know i installed x and kde, documentation doesn't say anything about specifying a path, locale and whereis don't show a path. what should i do?
edit: it also isn't found in /usr/bin/X11R6 or /usr/bin or /usr/bin/X11
View 4 Replies
View Related
Jun 30, 2010
Whenever I try to run startx as a regular user it sometimes executes and at other times it fails. I have to manually restart my machine. When it does execute, the window manager loads, but eventually freezes, and again, I have to reboot.
View 14 Replies
View Related
Nov 10, 2010
I'm running Slackware 12.2 with wmii-3.9.2 as my window manager. My problem is that after startx wmii sometimes becomes unresponsive i.e., can't open xterm or any other program or even quit. have to use Ctrl+Alt+BkSpc.
"$ cat /var/log/Xorg.0.log | grep (EE)" returns nothing. Though after quitting X I often see XIO error 11 (resource temporarily unavailable) but I don't know if this was caused by killing X. Graphics card is nVidia ION. I'm using the latest and recommended driver from [URL](260.19.12). //for xorg.conf see at the bottom
It doesn't seem to be a hardware issue as all the hardware is working properly (dmesg reports nothing suspicious). /var/log/messages reports nothing unusual (except for some acpid messages but that's probably another story).
I suspect it's something to do with my xorg.conf and/or the DISPLAY variable and/or wmii (because Xfce4 does not freeze). echo $DISPLAY returns :0.0 but this value is set by startx/xinit anyway. So I'm lost at this point.
My xorg.conf is:
---------- BEGIN ----------
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen1"
InputDevice "Mouse1" "CorePointer"
[Code]....
View 11 Replies
View Related
Jul 1, 2011
When I try to change the resolution, it only shows 800X600 and 640X480 or something similar, nothing regarding a custom resolution. When I use the "Install Guest Additions" it won't mount because of some error, and so I can't open it, and even if I could mount and open it *I've tried it in other distros that don't automatically install it for you* I have no idea what to use. I've tried all of the .sh, even the autorun.sh and giving it executable permissions, and it STILL doesn't work. Perhaps I'm missing something, or there's a documentation out there that I can't find, but I can never get them to work. How can I fix this problem? I know in sbopkg, there's 32-bit Virtualbox Guest Additions but that doesn't work. The reason why I installed the 64-bit one is because I don't have 6 CDs to spare and I'm almost out of bandwidth and it has to last me a week. *I think around 200GBs out of 250GBs taken up so far, or more*
View 14 Replies
View Related
Dec 29, 2010
I'm slack 13.1, I am trying to install it, but always gives an error. I type cfdisk and appears this error:
Fatal error: bad primary partition 2: Partition ends in the final partial cylinde Press any key to exit cfdisk
View 14 Replies
View Related
Dec 21, 2015
I updated Debian system yesterday. I am getting black screen after I execute startx command. I am using system as server and manually boot into GUI mode whenever required.
View 10 Replies
View Related