Fedora :: System Monitor Not Opening / Thunder Bird Opening But Not Showing Any Folder Including Inbox?
Nov 20, 2010
i am using Fedora 14. Once system get hanged during opening a video file so I had to restart the system by pressing restart button. But after restarting there are few problems appearing like system monitor not opening and Thunder bird opening but not showing any folder including inbox.
---------- Post added at 04:54 AM GMT ---------- Previous post was at 04:42 AM GMT ----------
Looks like SElinux has stopped working
View 3 Replies
ADVERTISEMENT
Aug 17, 2010
think I have a quick question about outgoing server, how do I change the port number, I don't see an option for it anywhere. I kept getting this error when I try to send an email.
Code: Sending of message failed. The message could not be sent because connecting to SMTP server smtp.live.com failed. The server may be unavailable or is refusing SMTP connections. Please verify that your SMTP server settings are correct and try again, or contact the server administrator.
View 4 Replies
View Related
Mar 15, 2011
I have a 2 monitor configuration, with the second monitor uses exclusively for mythtv. When I'm not actually watching tv or a muvie or watching visualizations with music playing, I actually use the machine for more productive uses. As the result the second monitor is typically not turned on, might have something to do the the fact it's a crt design, consumes a fair bit of power and does a good job keeping the media room overly warm.
The question is, does Fedora 11 or newer have a means to prevent applications from opening on the second monitor? I've checked the obvious places and nothing jumps out .
btw: According to the nvidia x server settings control panel the second monitor is set up as in twinview mode. This mode was chosen to allow the gpu to do most of the video decoding tasks using vdupau or something as I recall.
View 5 Replies
View Related
Jan 18, 2011
When I click on a folder in "Places" the appearance editor starts up and says that for example "Home Folder" or "Documents" does not appear to be a valid theme. XDG-open has the same results. Folders on the desktop open fine. I am at a loss here, I can't figure out what I did.
View 1 Replies
View Related
Feb 7, 2011
One of the apps I would like to try out is usenext.Selectint the download for the right version (Linux - Suse, Red Hat, Fedora) I get the rpm file.Either opening this straight away or saving then opening it comes back with the following errors:
usenext-5.27-1.i386 requires mono(gdk-sharp) = 2.10.0.0
usenext-5.27-1.i386 requires unrar
usenext-5.27-1.i386 requires mono(glib-sharp) = 2.10.0.0
[code]....
View 8 Replies
View Related
Mar 28, 2010
I have a multi-head system (three monitors). Using KDE 3.6 I was able to specify that new windows were to open on the monitor on which the mouse cursor was located. I don't recall where the setting was configured but I can't find anything like it in 4.3. Is there somewhere I can set this option or is it no longer available?
View 2 Replies
View Related
Feb 12, 2010
A strange problem has cropped up with gnome on 9.10 amd64. Everything seems fine until I open a folder of JPG images. The window opens, starts filling in the icons and then POOF everything disappears except the desktop background. I have to restart X with CTL-ALT-BACKSPACE. It happens every time. I have used this folder many times in the past without problem. The folder's contents appear ordinary - see below:
the contents of the folder are:
[Code]...
View 3 Replies
View Related
Jun 27, 2010
I used to be able to open a terminal when viewing a folder and the terminal would automatically be in that directory so all I would have to do is type the command. Now, it doesn't seem to work like that. No matter what folder I'm viewing within Konquerer or Dolphin, the terminal is always at the /home folder no matter what. Can I change this behavior and set it to the way it used to work on my old system? (SuSE 10.0)
View 3 Replies
View Related
Nov 29, 2010
I am helping a friend with his ubuntu PC, and I reinstalled to go from 8.04 to 10.10. In the process I had reconfigured his home directory to be a separate partition, it all worked ok. Although I did have to do the new install as a new username etc as I think is usual in such cases. I am not *convinced* I sorted all ownerships and permissions out. after the new install, I did change ownership of /home/oldusername contents using chown, which seemed to work ok. I do note that for the old username in the original 8.04 installation the uid was 1000, but the same username in the new installation is 1001
the problem is that nautilus does not start from Places > Home folder all that is seen is a waiting circle, which soon stops. But nautilus *does* start from a user terminal with just nautilus
View 7 Replies
View Related
Mar 28, 2011
For about a week or two when I try to open a folder from the menu "Places" of Gnome 2.32.0 (with Fedora 14 OS) the program Rythmbox starts instead. This happens even when I try to access a connected harddrive which requires entry of a code. After entering the code again Rythmbox opens! This doesn't happen only with "Computer", "Network" and "Connect to Server" of "Places". I can't think of anything that I did (apart from using Rythmbox quite often recently) that could have caused this, so I assume that it is a bug of Gnome. Have other people encountered this problem? (I assume that it is not Fedora specific, but rather a general problem of Gnome) If so,
View 4 Replies
View Related
Feb 9, 2010
I have openSUSE 11.2 KDE with NVIDIA drivers. I have a TV on the left and a monitor on the right. In the Nvidia drivers this has also been setup as stated. The TV is on position 0:0 and the monitor is in position 1920:0. The monitor has been ticked in the drivers as the primary screen.
My problem is that all application open on the secondary screen and not the primary screen (monitor) as I expect. How to the OS/drivers that will ensure that application always open on the monitor situated on the right are welcome.
View 5 Replies
View Related
Apr 29, 2011
I just upgraded from Maverick 10.10 to 11.04 64-bit and I have the following problem: every program that provides an "open file or folder" function such as synapse -> open folder, firefox downloads open folder, deluge open, instead of opening nautilus in the desired folder (default behavior of 10.10), it just opens a gnome-terminal.
View 7 Replies
View Related
Nov 8, 2010
Hi I am a complete newbie I have installed ubuntu 10.04 I have sorted problem with Mobile broadband, but having problems opening root folder I get a permission denied not the owner I have admin privalage as far as I am aware I was following something I read using terminal but kept getting a message saying something about the root I opened the file manager found root folder but still denied access. how I get access same is also true for lost&found folder but have to admit i dont know what that folder is.
View 7 Replies
View Related
Mar 8, 2011
when i try to navigate to my home folder, or any folder for that matter from the main menu bar, it brings up the appearance preferences menu. it started doing after i made a new background picture using GIMP.
after setting the img file as the desk top using the appearance prefrences, this started happening. if anyone could help me fix this that would be awesome.
View 3 Replies
View Related
Oct 25, 2010
"Places" menu appearing there in Documents, Pictures ... when you click on any menu started a music player instead of opening the folder. Ubuntu 10.10.
View 1 Replies
View Related
Nov 17, 2010
I used Unison to sync my desktop and laptop. Now I am getting the following error when I open my Evolution Inbox (and a few of my other mailbox folders).
"Error while Opening folder mbox:/home/myname/.evolution/mail/local#Archive/foldername"
"column folder_name is not unique"
I have tried moving the .evolution/local/mail folder opening Evolution, closing and then moving back - no joy. It is also definitely not a folder size problem, my mailbox is less than 1GB.
Opening Evolution from the terminal I get;
** (evolution:7529): DEBUG: mailto URL command: evolution %s
** (evolution:7529): DEBUG: mailto URL program: evolution
[code]....
I tried using the advice in this thread (the only one I can find with a similar error):
[URL]
cd ~/.evolution/mail ; for i in `find . -name folders.db`; do echo "Rebuilding Table $i"; sqlite3 $i "pragma integrity_check;"; done However, I still get the problem. I'll paste the print out below as it is rather long.
View 2 Replies
View Related
Nov 26, 2010
I have been using ubuntu for a while and i like it a lot, im a web developer and i have windows xp installed in virtual box, i moved completely to linux and just use windows to test in ie, it had been a while since i didnt use windows and i had to use in the last few days and noticed how much faster it is, the thing that bothered me the most is when opening folders in the desktop or the recycle bin, in windows its instant, in ubuntu opening a folder takes a long time to open nautilus, is this normal or is my installation bad, any comments are appreciated, i dont want to abandon ubuntu, i really like it but it really bothers me that nautilus is so slow to open.
View 9 Replies
View Related
Mar 3, 2011
Is there a way to imitate OS X behavior of opening applications in Linux?
For example: Assume that I already have Firefox open. In OS X it is very easy to open that window from console (it is the default, using open -a firefox).
View 2 Replies
View Related
Jan 11, 2010
I am having audio problem on hp laptop having ubuntu 8.04 The problem is system freezes after opening any application which uses audio. I have tried <code> wget -O alsa-info.sh [URL] && bash ./alsa-info.sh</code> and it gave me [URL]
View 1 Replies
View Related
Jan 8, 2010
I have installed quanta plus software as i fount on net that quanta plus is nearest to dreamweaver.But now i am facing a problem in it as it is not able to open any php files which are located on another PC. Although my PC is connected to that PC in the network but still i have to copy those files in my local system and then only it is opening. But i want it to open directly.Is there any solution?
View 4 Replies
View Related
Mar 14, 2016
My system currently freeze entire UI more frequently when opening more than 1 tab in chromium. not relate to any specific web page but especially on [URL] ....
Code: Select all uname -a
Linux GlobeTravelers 4.3.0-1-amd64 #1 SMP Debian 4.3.5-1 (2016-02-06) x86_64 GNU/Linux
chromuim
Version 49.0.2623.75 built on Debian stretch/sid, running on Debian stretch/sid (64-bit)
I google and found lot of chromium freeze UI bug reports on Ubuntu, Fedora, Osx ...
View 2 Replies
View Related
Jan 29, 2010
I have hp pavilion dv6 1386et notebook with windows 7 home premium package. I tried to install suse. But there is something wrong.First I have tried to istall suse 10.3 but installation screen did not appear.Then I tried it with suse 11.2, it was hopeful than 10.3. Installation screen opened and after first rebooting screen have got frozen. So I reboot it manual.Installation only continued with failsave. It has finished, I heard sound of opening system but screen was black.
View 9 Replies
View Related
Feb 24, 2010
So after installing T-bird 3, I've pointed it to my old profile folder (which had a different name), and all of the settings seemed to be imported fine: I get all the folder and all of mail accounts, and also when I check e-mail, in status bar at the bottom I see how it successfully connects to all my mail servers and checks them. However, there are a lot of issues in the process:
1. It doesn't download any e-mail (but I know for a fact that there is a lot of it)
2. When connecting to every new server, a message asking me to wait while the folder is being processed pops up. Which happens even on the mail check upon the startup when it is certain that this is the first time it check the e-mail.
3. If an indexing feature is enabled, it hangs up with a message "Determining which messages to index in Sent" or something...My total e-mail folder is about 500 MBs, so it shouldn't be that bad, right?
4. But even if that feature is disabled - and that is the most important problem - all of my folders are empty!
View 4 Replies
View Related
Aug 8, 2011
when I type "crontab -e" to edit the file, it is not opening in the editor & showing output as "285". I just wanted to edit crontab, So could anybody please tell me which is the real file of crontab, so I can manually edit that file using vi editor or nano. Or if that default editor is corrupted when I type "crontab -e", how can I change default editor before using "crontab -e" command. I will be waiting for your kind reply
View 2 Replies
View Related
Oct 29, 2010
i have installed skype, latest version, however, when i try to open from Applications/internet/skype,,,, it is not opening.... checked to open in terminal,,, given below error....:
[root@Ganesha Sandeep]# skype /usr/share/skype/
Fatal: Cannot mix incompatible Qt libraries
Aborted (core dumped)
[code]....
View 14 Replies
View Related
Oct 31, 2009
I am trying to use Firefox to open a *.csv file from a download button on a Web page. The download button would open a dialog that offers me to choose to either open the file with Open Office Calc or save the file. I would like to open it on the fly. But an error comes up that reads:
Code:
/tmp/HIST1031-4.csv could not be opened, because the associated helper application does not exist. Change the association in your preferences.
The helper application in Firefox's Edit > Preferences is Open Office Calc. I checked in /usr/lib/openoffice.org3/program/, and found the script for scalc.
View 6 Replies
View Related
Apr 4, 2010
how i can say fedora that if a file has a special suffix to open it with a special app?? such as .oct with octave or ...?
View 6 Replies
View Related
Jun 27, 2010
I have just re-installed open office for the third time hoping to solve this problem myself : but no luck.I followed the install steps to the letter and appears to be installed properly but the office menu comes up blank as far as open office is concerned.They don't show up in the menu edit program either.
View 4 Replies
View Related
Mar 3, 2011
I can no longer open TweetDeck either from the desktop shortcut or menu.I tried reinstalling it to see if that would fix it & after install the program ran fine but after shutting it down & trying to restart it from the shortcut icon/menu it says starting but does not complete & would not restart again.The only change to my computer was earlier I had installed Samba to access Vista network shares. Would this be causing a problem opening TweetDeck?Anyone any idea how I might get TweetDeck to work properly?I will keep trying to fix this (tricky when I do not know what the cause is!-I have googled but no reference found yet) but I am most grateful for help(meantime I am using Gwibber to tweet- but I much prefer TweetDeck & would really like it working properly in my dualboot Fedora14).
View 7 Replies
View Related
Jun 1, 2011
I tried to run
Quote:
Command automatically in gnome terminal, when i open it. so i changed the setting in edit->profile preferences->title and the command->command section. now when i open the terminal,command is running successfully.afterwards terminal is closed automatically. how to open my terminal prompt.with the sl program running and not closed..
View 2 Replies
View Related
