Ubuntu Installation :: Boots To Grub Prompt After Installation Upgrade
Jul 10, 2010
I installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?
View 8 Replies
ADVERTISEMENT
Feb 3, 2010
I installed 9.10 with wubi and lately I had a boot problem with the result is that it boots to a grub prompt. I tried several commands, but no success. I thought I hosed the system. [URL]. Once I copied the new wublidr file over, that did it! Give it a shot, as it works.
View 1 Replies
View Related
Jun 7, 2011
I'm running Ubuntu within VMWare on a Macbook. I followed these steps [URL]... Recommended) to upgrade form 10.04 to 11.04, which actually upgraded to 10.10 first, and then a graphical upgrade brought me to the 11.04 upgrade, but then i ran into the problem where a grub> prompt appears when i start up the machine... nothing else happens. I found this thread [URL] which seemed similar to my problem, but the suggestions didn't work.
Code:
grub> ls
(hd0) (hd0,5) (hd0,1) (fd0)
grub> boot
error: no loaded kernel.
grub> linux
error: no kernel specified.
that's what I see. any way to resolve this without having to download the CD and start from scratch? It's grub 1.98, if that's important to know.
View 1 Replies
View Related
May 24, 2010
I installed 64 bit Lucid Lynx last week. There were some issues with the grub boot manager and my windows boot manager. However, about half the time i would boot to reach only a login prompt. If i used CTRL ALT DEL i would then reboot usually into the GUI.So now i only reach a login prompt all the time. How do i get the the GUI to run automatically?
View 4 Replies
View Related
May 26, 2010
Since upgrading ubuntu boots to a prompt rather than logging into gnome. has anyone run into this? what can I do to fix this?
I recently upgraded from Ubuntu 9.10 to Ubuntu 10.4.
does anyone know the command to start gnome from the prompt?
View 4 Replies
View Related
Feb 9, 2010
I recently installed Kubuntu with the windows installer wubi. Everything has gone fine until today. When i turn on the pc i normally have a prompt to go to windows or kubuntu. I choose Kubuntu and it loads it up. But now it goes to a grub prompt and i have no idea how to fix this or get into Kubuntu.
Things i did before the last reboot that may have caused this.
I edited my swappiness to help speed things up at the advice of many websites.
Example: url
I changed it from 60 to 10. I did this by adding the line "vm.swappiness=10" to the end of sysctl.conf
I noticed that there was a # or something at the beginning of every line in sysctl.conf and i did NOT add it to my line. This is my guess as to why i am having problems.
The other thing i did was some bug updates. Something was popping up down by the clock area and it was asking me to do some bug updates of some sort. I said yes.
Any idea on how i can fix this? As of now i cannot get into kubuntu at all. It just gives me a grub command prompt.
View 3 Replies
View Related
Dec 20, 2010
I decided to upgrade my FC installation to the latest version - FC itself offered the upgrade when I turned the machine on, so it appeared that it was nicely packaged to make the upgrade easy.After a long download of packages, the machine rebooted and then started taking me through configuration options (timezone, disks to use for the installation etc) but then it crashed trying to write to disk and now leaves me at a grub prompt whenever I boot.Is there any way to "get at" the installation files and get back into trying to install or do I now need to download an ISO and burn a DVD and start all over again?
View 1 Replies
View Related
May 5, 2011
i installed ubuntu 10.10 to my external HDD and it works. Recently, i reinstalled windows therefore, there is no more grub menu when my computer boots. I tried to reinstall grub to my external HDD but it doesn't work.
View 9 Replies
View Related
Mar 6, 2010
I have been trying ubantu 9.10 via dual boot (with windows XP) for a while now. Today I decided to wipe out windows and install ubantu only. After I completed the install I get GRUB prompt and I cannot type anything. So I booted from CD again and opened ubantu from disk. ran the boot_info_script as mentioned on other posts here and here is the results
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 2928391 of
[code]....
View 3 Replies
View Related
May 6, 2010
I clicked on the upgrade to LTS 10.04 option on my Asus 901 EEE PC and after completion it will only boot straight to command line...I would like to get back to the UNR Gui.
View 2 Replies
View Related
Nov 29, 2010
After my upgrade the bootup seems to take a long time.I am dual booting with XP.From the boot menu when I select Ubuntu it takes 35 seconds before I get the login screen.Is this normal?Also, other apps seem to be running slow. Running Win 7 under VMWare Workstation 7.1.
View 7 Replies
View Related
May 16, 2010
I just installed Windows 7 and it erased my Grub bootloader. I followed this tutorial: URL...And now when my computer starts up it goes to the Grub prompt: Code: grub>I guess I did not do the right partition but I'm having a lot of trouble getting it back to how it was where my computer at least loaded the Windows 7 loader.
View 1 Replies
View Related
Apr 10, 2011
got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies
View Related
Apr 29, 2011
The upgrade finished, did a y to reboot and it boots to memtest, no sign of the grub screen at all.
View 2 Replies
View Related
May 22, 2011
My setup: a work laptop that has a corporate Win7 image, and to which I have added a few partitions to try various linux distributions. The MBR is governed by Lilo from the Slackware 13.37 installation in /dev/sda5. The MBR boots no kernel image directly, it only chainloads the boot sectors of partitions /dev/sda1, /dev/sda5, /dev/sda6 and /dev/sda7. The latter three are formatted ext4.The Win7 boot mechanism traditionally resides in /dev/sda1, and the linux distros are required to install their boot machines into their respective partitions.
What I am trying to say is, I installed Ubuntu 11.04 into /dev/sda7, and told the grub installer the same thing: install yourself into the boot sector of /dev/sda7. Kudos btw for the Ubuntu installer, it comes across as a very professional piece of software.
View 9 Replies
View Related
Nov 28, 2010
i have dual boot computer win7 and 10.04 ubuntu. i installed the ubuntu inside the win7
now i have problem that GRUB prompt out every reboot. i could get into system by type this(but GRUB come back after reboot)
Code:
set root=(hd0,1)
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /vmlinuz root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /initrd.img
[Code].....
View 2 Replies
View Related
Jul 22, 2010
Summary: After intermediate upgrade, Ubuntu Lucid LTS 10.04 64bit Desktop Edition will "NOW" not run in any Graphics mode on my machine.
General; Ubuntu has been my favorite OS to live on, play and relax. I have to use other OS'es, but I choose Ubuntu as "mine". I can go around it safely and tweak it to my own likings and needs. It has also been a great tool to exchange things between other OS'es.
History: I started with Ubuntu Karmic Koala 9.04 64bit Desktop Edition. Last March, I upgraded to Ubuntu Lucid LTS 10.04beta 64bit Desktop via the Update Manager, using Ubuntu's instructions... as a Beta Tester. I kept up with Updates and everything had been fine.All went well, albiet minor adventures that gave me oportunities for enriched challenges and training. Overall, since the early days of that, my system has been very stable and reliable- Until last Saturday through Yesterday...
Problems: First thing I noticed is that there were some security updates Friday. Saturday when I came up into Ubuntu, it came up in error saying it had to come up in a low graphics mode. I shut down the system and restarted. It came up fine and I thought nothing more of it at the time...
Second, I tried to install Ubuntu Lucid LTS 10.04 64bit Server Edition on another drive. My other drives were isolated. Although the install said it was successful, on reboot, it would not boot the system. It would get a purple splash on my screen, then either lockup or go to a text based screen dump. Server Platforms said this was a text based OS and couldn't explain the purple flash or the error... I shelved this project until later and thought nothing more of it.I checked for updates through the weekend (even though there usually isn't any on weekends), and as usual it said everything was up-to-date.
Third, Monday the "Update Manager" said there was too many updates to do at once, that it needed to do a partial update. I selected, but it couldn't complete, because it said that there was conflict on a KDE package that it said it needed to remove, but couldn't because it was in a blacklist. It further said that this could have resulted from a DEV vervion of Ubuntu.
Fourth, I upgraded some packages through the Synaptic Package Manager, to try to reduce the number of packages that the Update Manager was trying to update. All those packages said they updated fine. I then went back to the Update Manager and it still said it needed to do a partial update... but it completed and said it was successful. I noticed that the top of the dialog box was tiltled "Distrubution Upgrade." I noticed that some of the files seemed to be an xorg upgrade... After the update, I had to do other things, so I shut down my system.
That was the last time this machine has been able to start Ubuntu. When Ubuntu tried to startup, it said it had to boot in a low graphics mode, but could not- it blasted the monitor with vertical purple and red lines.I had a copy of the Ubuntu Lucid LTS 10.05 64bit Desktop Edition LiveCD on my other machine. I burned a CD and tried. The only mode I can get to boot from the CD (on my machine) is in a text console- no xwindows system. On starting up an xwindows system will blast the grahics of the monitor, then (sometimes) continue to a monitor test-based screen dump that flashes by until the system locksup.
View 6 Replies
View Related
Oct 5, 2010
I recently upgraded my Ubuntu from 9.10 to 10.04 and now it's messed up my Windows Vista partition. When I try to load Windows it boots to a strange login menu with low resolution. It then takes me to a screen with options like Repair/Fix, Recovery, Complete Recovery... I'll click Repair and and then it will say No errors found, Shut down, Restart.
View 2 Replies
View Related
Apr 29, 2011
I upgraded from 10.10 to 11.04 and after the upgrade
- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!
I saw, at the end of the installation process, that the driver for the nVidia video card was removed.
View 9 Replies
View Related
Jun 8, 2010
Im a newbie having the opposite issue that seems that everyone is having for what Ive seen, I have Grub on the MBR, showing the splash screen fine (the background image also), and allowing me to boot Windows 7, but I get a cursor blinking for the eternity when trying to boot Fedora 13.My hardware is:
Quote:
-ASUS M4A89GTD PRO (AMD 890 FX AM3 Chipset).
-Phenom 965 BE.
-4Gb RAM.
-3 x 250 Gb SATA Hard disks, first one alone for OS, and the other two in fake RAID1.
-1 x 80 Gb IDE hard drive containing trash.
-RADEON HD 4870 1Gb Graphic Card.
-RME HDSP 9632 Soundcard
[Code]...
View 4 Replies
View Related
Oct 17, 2010
After upgrade to 10.10, I only get the command prompt. Fortunately, all my XP Pro machines are running, and I am using one of them to access this Forum. I suspect that nVidia graphics driver did not load correctly. running startx at the command line gives numerous lines of text apparently understandable xorg gurus. It looks like nvidia_drv.so did not load and module "nvidia" did not load [loader failed, 7] and next line says no drivers loaded.
View 4 Replies
View Related
Feb 6, 2010
I just installed Ubuntu 9.10 on hd1 - /dev/sdb1 at the end of the installation I chose to install grub at hd0 - /dev/sda1. The file system I chose was ext4 for ubuntu "/" - 50 GB,
ext3 for "/home" - 5 GB, and 1.5 more for swap. When the installation was complete I got the following prompt:
GRUB loading
error: no such disk
grub rescue>
>
There was nothing I could do, pressing TAB did not show me all the commands like grub is expected to. Typing 'help' did not show any commands as well, instead it showed me - "NO SUCH COMMAND" or something like that (I did not took note of what the output was). I believe the problem is in the grub loader - which was not really installed properly in hd0 - /dev/sda1 (which is FAT32 - windows)
View 9 Replies
View Related
May 11, 2010
Two days ago I decided to migrate from Fedora to Ubuntu 10.04. On the Ubuntu install I chose to format the entire disk as I do not want a dual boot system. I have three disks and have set the bios to boot from dvd, then main disk, then 2nd disk, then any other bootable drive and coming from a working Fedora I know I have my "slaves" and "Master" pin positions on the disks set correctly.
When I try to boot the fresh install of Ubuntu I do not see any menu options, no boot image nothing, I get taken immediately to a grub command window and I dont know how to fix things from there. I have tried to fix things by booting into the "try before you 'buy'" thing on the installation cd and I can see that Ubuntu has been installed on the main disk, but all in all Im stuck.
View 4 Replies
View Related
Jun 19, 2010
So I had Ubuntu Server installed and I decided to make some new partitions using gparted via a live usb of Ubuntu desktop. And so I think messed up pretty badly. Ubuntu Server won't boot and I get the following error followed by a grub rescue promt:
Code:Diskette drive 0 seek failure
error: file not found grub rescue >
To me, it seems like some boot files may be missing if not the whole system. After I made the partitions, the live USB of Ubuntu was still working fine until I rebooted.So here is the bigger issue, I figured I would just reinstall everything all over again, but instead I can't.
View 6 Replies
View Related
Jun 30, 2010
upgrading my Karmic 9.10 to Lucid 10.4 I can't boot anymore to Linux only to Windows.My installation is a WUBI installation and I installed it on the only harddisk I have in the folder c:ubuntuNow when I boot I get a grub prompt and when I do LS I see hd0,msdos01 as partition.Now's I've tried to manual boot it by using the following commands from the ubuntu manual
set root=(loop0)
linux /vmlinuz root=/dev/sda1 loop=/ubuntu/disks/root.disk ro
after this command I get an error
[code]....
View 9 Replies
View Related
Jan 10, 2011
I upgraded my dell inspiron 6000 from ubuntu 10.04 to 10.10 then rebooted and now I am stuck at the grub prompt. I am able to boot from a flash drive and have run the boot script. This laptop did not have a dual boot system on it but it did have windows on it at one time, converted to ubuntu.
View 9 Replies
View Related
Mar 28, 2011
i have a dual booting the first one being ubuntu 10.04 within which i have installed windows7.Unfortunately,i've formatted that part of my hard disk in which i've had ubuntu. Now my problem is i cant load into any of the two os and i dont want to loose my vital data in the system.I've tried booting using the live CD but in vain.i desperately need my info in my laptop.
View 3 Replies
View Related
Jun 20, 2011
I have installed BackTrack 5 and I have set GRUB up:
Code:
root (hd1,4)
setup (hd1)
However, the GRUB prompt appears at boot instead of the GRUB menu. However, when I boot from the Live USB, the GRUB menu works fine. Here are the contents of the grub.cfg:
Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
# .....
The reason I want the GRUB menu to show up of because I would like to dual-boot BackTrack 5 with Windows 7.
View 1 Replies
View Related
Oct 20, 2009
Im running fedora10 and have installed quite a few extra apps etc that are not from yum. Things like vmware workstation, Lotus notes, crossover etc. Every now an then I get a popup asking to upgrade to fedora 11. I do want to move onto 11 but does this way of upgrading work well or is there a better way to upgrade. I was thinking of making an image on my laptop first but have not found a good image tool that allows me to save and restore an image to a network.
View 1 Replies
View Related
Jun 11, 2010
just upgraded to Lucid. When booting, I get a blinking cursor on a black screen for 30 sec. Then I get some flashes of text about UDEV. Finally, I get a desktop after about 30 more sec.
Any way to speed this up? I've already tried disabling my nonexistent floppy drive in the bios, but it didn't help.
View 9 Replies
View Related
