I have freshly installed Xubuntu on my HP compaq nx9010 laptop and grub doesn't boot system. Only minimal BASH-like line scripting is supported. How can I fix it?
View 9 RepliesI have a HP Compaq nx9010 laptop with 1 gig of memory and 128mb being dedicated to video memory. The graphics chip is ATI Radeon IGP 345M.
I can only set my resolution to 1024 X768. If I try to change it to any other size or try to play any games, the video has millions of jerky horizontal lines going through it. If I hookup an external monitor the video works just fine. Being new to linux and even newer to installing on it laptops, can anyone tell me what if any thing can be done to correct this. I am running Ubuntu 10.4 LTS.
Has anybody idea which distribution of linux shoud run on HP compaq nx 9010 without problems?
View 3 Replies View RelatedI have been using Ubuntu for years. I just bought a new laptop - HP Compaq 621. Hardware settings:
Processor: Intel(R) Core(TM)2 Duo CPU T6570 2.10GHz
Memory: 1GB
ROM Date & revision: 01/07/2011, 68PVI Ver. F.09
Video BIOS Revision: ATI 01/05/2011
I followed exactly what is described on Ubuntu [URL] Believe me, I burned image (not .iso data) to CD, but BIOS won't boot from the Ubuntu bootable CD. I also created a USB stick, again BIOS won't boot from the Ubuntu bootable USB (I selected to boot from USB first) stick. I tried with Desktop 10.10 32bit, 10.10 64bit, 10.04 32bit, and 10.04 64bit.
I also tried with my old Ubuntu Desktop 8.04 64bit bootable CD, which my very old Compaq Laptop installed. It allows me to see the menu. I selected "Safe mode" to install Ubuntu. But it gives me the error message: "udevd-event [1412] run_program /sbin/modprobe"
how I can install Ubuntu on my HP Compaq 621 Laptop?
Trying to install xubuntu 9.10 on an older Compaq Armada M700. Starts up fine from the CD. I choose English and then choose Install Xubuntu from the menu. It attempts to install for about 20 minutes and then freezes up. I am never prompted for any other choices during the installation. I have WindowsXP installed on the machine, but want to wipe it out and just have Xubuntu installed.
View 2 Replies View Relatedhow to fix the detection of ps2 mouse under Debian Squeeze? It is the optical mouse with wheel, red light shines, but mouse doesn't work.
View 14 Replies View RelatedI'm currently having problems trying to install Ubuntu on my laptop.I have burnt off a CD that contains the latest Ubuntu 10.10 iso using the exact way the website tells me to.However, I can't boot from that CD. I can, however, boot from other CD's. For example i ran my Gparted Live CD to create a partition on my hard drive about an hour ago and that worked fine.
View 6 Replies View RelatedMy system doesn't boot anymore, when I turn on the laptop, instead of the normal grub screen, i get the following:
"error: file not found
Entering rescue mode...
grub rescue> _"
I tried also to make a bootable usb w/ unetbootin but all the distros failed to load w/ a syslinux boot error message so I really need to fix the existing debian installation to get access to my files i need for the university, it's debian stable (6.0.4) on hp mini 210 ....
I have windows7 installed in my laptop. I tried installing Redhat linux in it, and I was successful. But then I logged in with windows7 and deleted the partition in which I had installed redhat through computer management. Now my system doesnt boot with windows instead it boots with GRUB. Also to inform that the deleted linux partition I merged with Windows.
View 2 Replies View RelatedI tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed.
View 1 Replies View RelatedJust noticed that my kids are no longer able to play webkinz on my 64bit system (Edubuntu). Webkinz also doesn't work on my 64bit Xubuntu system. Looks like 64bit Flash is broken? -- or something is broken between Webkinz and the latest flash. Webkinz, predictably enough, works on Windows, but also works on my 32bit Linux system with the latest flash.Just wondering if any of you out there with a 64bit system could try accessing Webkinz (if you can see the Login moniker and click it, then it's working on your system).
View 9 Replies View RelatedI'm brand new to Fedora. I ran the live cd and installed Fedora. I then installed OpenSUSE and Mint. When Mint formated the hard drive, Fedora wasn't in the graphic, even though sda1 was ext4 and sda3 was lvm2. When Mint rebotted, Mint and OpenSUSE were on the menu, but Fedora wasn't.
View 14 Replies View RelatedI'm trying to install Lubuntu 11.04 CD on a Compaq Presario M2000 Laptop to replace XP.
Processor: Intel Pentium Celeron M
RAM: 256mb
Existing O/S XP SP3 (boots & runs but is very slow)
Hard Drive 40GB (28Gb free)
Installation hangs about 1 minute after selecting language in both try Lubuntu & install Lubuntu modes. Have also left the laptop running all night to see if it was just a slow install. Have tried various other disks (Xbuntu, Puppy, Mint, Lubuntu 10.04), which have worked on other PC/laptops ok, but all stall after the language settings. Have tried burning the Lunbuntu iso with both Windows & Ubuntu at slow speeds & have verified the burnt iso. The laptop BIOS cannot be set to boot from usb, so an external CD or USB stick installation may not work? The BIOS has been updated to the latest one on the Compaq web site this morning. Although I have installed a few flavours of Linux on various hardware, I'm still a real Linux newbie. Can Lubuntu be installed within Windows, but still format the hard drive to ext2/3 ?
I have a dual boot windows XP/ubuntu 9.10 set up on one hard drive. Everything was working fine. The 9.10 install had been updated from 9.04. I recently had problems with the XP partition (XP basically collapsed) so I re-installed XP on the same partition it was on before. I then attempted to reinstall Ubuntu ( I decided I wanted a new 'clean' installation of Ubuntu as well). When I got to the partition function it refused to recognize that there is a Windows partition, or a previous ubuntu partition, but states 'No operating system installed' or similar, and offers the entire hard drive for installation. When I look at the partitions using Windows partition software the Windows and the ubuntu partitions are clearly in evidence. I have also tried to reinstall GRUB but it doesn't appear to exist.
View 3 Replies View RelatedI loaded Kubuntu 9.1 and got a mess in the Grub 2 Boot Menu, which I can't correct.
I get extra choices in the Boot menu, and the first few, which are supposedly for Kubuntu Karmic Koala all put me in a shell, which ends in a black screen, then shows up a shell once I hit "enter". Then I just have a "intramfs" (?) prompt.
So I went into Grub2 to change it, and it refuses to do it. All I get is a screen full of error messages every time I try, with no change. Apparently it is looking to access drive sdb8, which is non-existent. I DO have a drive sda8, though.
So with all the wonderfulness of the indirect system to change Grub 2 how am I supposed to set it right? The old Grub worked fine, and just took simple changes to the menu.lst file.
Can't somebody write a program that lets Grub 2 be changed from within the program, rather than all this running around trying to find what file to change, and how to get the change to work?
Just to be clear, here are the errors as they show up when grub-update is flailing around:
"error: cannot open '/dev/sdb' while attempting to get disk size
error: cannot open '/dev/sdb' while attempting to get disk size
Generating grub.cfg
error: cannot open '/dev/sdb' while attempting to get disk size
[Code].....
Ubuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies View RelatedI had been using Xubuntu 9.10 successfully for some time. Recently, however, I tried to boot Xubuntu, and instead of reaching the login screen, a "GRUB" interface appeared. The title was "GNU GRUB VERSION 1.97~beta4"
Below that, there were a few instructions describing the use of the Tab key and a blank command line interface beginning with "sh:grub7". Before this started occurring, my computer would turn on and then display a menu to choose the OS. If I selected Xubuntu, a few lines would flash by, and the login screen would appear. My computer is a Dell XPS M1530 laptop. The operating systems installed are Windows Vista Ultimate and Xubuntu 9.10. The Xubuntu was installed using a Wubi installation.
As far as I remember, I did not make any changes that may have caused this. The only significant event that did occur was a power outage, but my computer was not plugged in nor on at this time.
If everything works normally, how would I boot Wubi Xubuntu from the GRUB interface? Are there any other solutions to this problem?
I am trying to boot kubutu from FC10's grub. FC10 is in MBR, installed kubuntu without grub. Is that a problem for me now? I mean, should I need to install kubutu grub in order to boot from FC10 grub? I tried with these methods but nothing works:
title Kubuntu 8.10 Linux
chainloader +1
title Kubuntu 8.10 Linux
[code]....
My Wubi installation of Ubuntu (version 9.10, I think) that I recently installed was working fine at one point, but now it isn['t. I select Ubuntu instead of Windows from the Windows boot loader, but instead of getting the usual menu of different linux versions (I think 2, as I updated it at same point), and Windows, I get the GRUB command prompt instead.I've looked at th2e Wubi Guide (https://wiki.ubuntu.com/WubiGuide), and I've followed the instructions for "How can I access my Wubi install and repair my install if it won't boot?", but that reveals no problems.For the record, I'm fairly new to linux and ubuntu, but I'm good with computers generally. The main operating system on my computer is Windows Vista, but I'm currently typing this from a Live CD of Ubuntu 9.10. The virtual disk (root.disk), is currently mounted as vdisk, as indicated in the Wubi Guide.
Ideally I would like to get Ubuntu to load as it used to (with a menu). However, if there is a way to boot from the GRUB command line that would be good too. I'm not at all familiar with GRUB, and the commands I've tried (boot and linux, I think), get errors saying no kernel specified, or loaded, or something like that.
i tried to install ubuntu netbook remix edition 10.04 on my laptop HP Compaq 550 through a usb flash stick ... with the usb creator which included into the iso image i got this msg (( attached screen-shot )) .i tried another application which makes a usb bootable disk called "UNetbootin" it boots successfully but after booting every thing got FREEZED ... i tried the same thing with ubuntu 9.10 it's succeed .. but i neeed to install 10.04 .
View 8 Replies View RelatedI'm having a strange behaviour with GRUB, and I don't know much about it. The problem is that GRUB is looking at the wrong place when it starts. I have a /boot partition (/dev/sda1) with everything for booting and grub. This gets updated when I update, say, the kernel, grub, etc. But I also have a /backups partition (/dev/sda4) with a directory /backups/boot/grub that is a copy of /boot/grub. The /backups/boot directory only has the /backups/boot/grub directory, not the kernels, etc.
If I delete the /backups/boot/grub directory, I get a "grub>" console at startup, and system doesn't boot. SO: Why is grub looking at /backups/boot/grub instead of /boot/grub and how can I fix this? This is my grub.conf, identical in both directories, and both pointing to /boot=/dev/sda1=(hd0,0):
[Code]...
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies View RelatedI tried to upgrade to Maverick (server version) usingsudo do-release-upgradeAll went well, but on the first reboot after the installation the PC hangs with grub prompt:error: the symbol grub_xputs not foundI guess it has something to do with my RAID1 setup:sda1/sdb1..RAID1, bootable (system partition, 20 GB)sdc1 ....swap partition sda2/sdb2/sdc2 ... RAID5 (data partition, 3 TB)I made a bootable (using UNetbootin) USB pen drive with 10.10 desktop on it and booted into this desktop version. Aftermdadm --assemble --scanI could successfully access (and mount) my RAID1 and RAID5 drives. However, the system itself does not boot.
after only having mounted /dev/md0 and browsed in the contents, the boot behavior has changed: now the PC does not end up in the grub prompt "the symbol grub_xputs not found", but instead a blank black screen with a blinking cursor left top is shown. Keyboard: no reaction (I tried Enter, Esc, any keys ... no reaction, just a blinking cursor).Then, I tried:
boot into USB pen drive 10.10 desktop
mdadm --assemble --scan ... result: /dev/md0 is available (the RAID1 of sda1 and sdb1)
mount /dev/md0 /mnt/md0
[code]...
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
I wanted to play w/ Linux at home so I bought the O'Reilly "Ubuntu: Up and Running" book. I'm using the included 10.04 CD. I'm not finding much info on installing from a CD there (well, not finding it easily at least).
I got an old Compaq desktop (model 5WV280, if that matters) from a friend. I checked the BIOS listing; it lists the CD as the first boot drive, diskette second, hard disk third. I don't have the password for his account, but I didn't think that would matter.
Anyway, I inserted the CD, did a shutdown and power up. The CD drive spins and the light comes on. Next, the diskette tries to spin and the light comes on. Finally the hard disk access light comes on and the silly thing boots to Windows XP Pro from the hard drive.
Did I miss something? I put the CD in my (heaven help me) Vista machine, and was able to read the CD with no problems.
I made an xubuntu disk.loaded it and rewrote my hardrive.on a pretty old averatec laptop. 3/4 of the install it gives a a io error and stops the install.I tried to reinstall from the screen again but got the same error.So I rebooted and it skips everything and goes straight to a grub loading stage 1.5, grub loading error 17. It even skips the live cd.I also tried to do it thru a usb stick but that gets ignored too.
View 3 Replies View RelatedI've had to give up trying to install linux. It just won't work on my machine, a Presario 6370us that has been upgraded over the years such that it is not compatible with linux, apparently. (You can read my travails elsewhere on this board; thanks very much to all who tried to help.)
Now, how do I remove the GRUB boot loader from my system? I need the system to boot directly to Windows XP.
I can't start linux in any way, shape, or form, so I need to either edit GRUB inside the GRUB environment itself, or to do so from Windows.
Ideally, I'd like to remove GRUB entirely. Failing that, I'd like to edit the GRUB config file so that only Windows is an option. Failing that, I need to make Windows the default OS.
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
I have used CentOS for a while and have never run into this issue. I searched all over and didn't see a similar issue anywhere, I did an install of CentOS as a server (no GUI) with only the base. Partition is /boot ext3, size of 100MB. The rest of the drive is partitioned as / with ext3. This is being done on a CompactFlash card of 32GB in size. The BIOS sees it as an IDE drive.
When the install completes and the system reboots, the grub stops at the grub> prompt. There is no menu for OS options. If I do the following commands:
grub>root (hd0,0)
grub>kernel /vmlinuz-2.6.18-194.el5 root=LABEL=/
grub>initrd /initrd-2.6.18-194.el5.img
grub>boot