Ubuntu Installation :: Ffmpeg For Firefox Videodownloader Addon - Package Corruption
Jan 8, 2011
I tried to install ffmpeg for Firefox videodownloader addon but did some nasty damage. First of all, I followed this guide: [URL] I'm using Ubuntu 10.10 Maverick 32-bit version The installation froze after this: Quote: Unpacking replacement x11proto-core-dev ... Couldn't find anyone having the same issue on the net, so I just exited the terminal and then I couldn't do anything anymore. When I tried to install again (or remove) that thingy, i got this in console:
[Code]....
View 3 Replies
ADVERTISEMENT
Oct 31, 2010
Im using firefox version 3.6.12 and it functions fine. However when i use the latest version of this addon https://addons.mozilla.org/en-US/fir...11377/#reviews the screen goes grey and firefox crashes. Restarting firefox only results in more crashes. I had a older version of this addon-1.5 i believe that worked fine.
View 2 Replies
View Related
Mar 14, 2010
I'm a bit confused but not surprised by this problem I'm having. I liked the look of the FoxTab addon for Firefox (Swiftfox actually but I don't think it should make any difference) mostly for homepage thing it has which is similar to the Chrome/Safari opening page.
I followed the FoxTab instructions for using this page when I open a new tab and that works fine, and then (as instructed) changed my homepage to 'about:blank' but this only works when I click the homepage button.When I open a new Swiftfox session it doesn't come up with anything (just a blank page -
View 8 Replies
View Related
Dec 16, 2010
I am running Ubuntu 10.04 64-bit with Firefox 3.6.13 (from the repositories) and I can't seem to get the Firefox Sync AddOn installed.The addon can be found at:Whenever I try to install it, it comes up with a download error (see attached screenshot). I am running the same version of Ubuntu (albeit 32-bit) and Firefox on my laptop, and I can install it just fine on there. This leads me to think that this problem must have something to do with the 64-bit version.
View 3 Replies
View Related
Jun 10, 2010
I need a Download Manager which filters files for instance When I download a oga, mp3 file it downloads it to Music folder or if I download a zip, tar.gz file it downloads it to Archives folder etc.
View 4 Replies
View Related
Sep 17, 2010
ubuntu lucid, firefox 3.6... but it seems the firefox 3.6 is not a complete 3.6 as its gecko is 3.0...; so whenever i want to install a update that is for ff >= 3.5, i always get, that this addon is not available for ff 3.0... my question:
1. is it normal that the ff 3.6 is running on gecko 3.0 on ubuntu? cuz in windows the ff 3.6 also has the 3.6 gecko
2. if so.. how can i update that gecko?
View 7 Replies
View Related
Feb 14, 2011
After searching these forums and Google, all I could find was PDFescape[/URL] is a web-based PDF editor with a FF addon.
View 8 Replies
View Related
Jan 3, 2010
Need a few suggestions on how to remove context menu and menu (Tools, etc...) icons from within Firefox. I somehow removed all icons for every extension and addon within Firefox on Windows7, but forgot what I did. It would be nice to know how to do this on Ubuntu... migrated over to Vmware to test out and I always like a clean look.
View 4 Replies
View Related
Jan 12, 2011
I cannot open firefox after I installed an add-on in the next page
HTML Code:
https://addons.mozilla.org/en-US/firefox/search/?q=molecular+viewer&cat=all&x=0&y=0
I try to remove (didn't uninstalled the add-ons that show up in USC) and install firefox
[code]....
View 3 Replies
View Related
Jun 17, 2011
Since moving from centos 5.6 to fedora 15 a week ago I have been unable to get Last Pass firefox addon to work correctly. Those of you familiar to last pass will probably have seen the error message before in a variety of situations, namely "An error occurred while attempting to contact the server. Please check your internet connection." This error appears as soon as you log in (which it does manage to do) but instantly loses authentication - seems like the cookie expires almost instantly and therefore all saved sites/passwords require re-authentication with LP to use.
No network configuration has altered since the OS change, but F15 comes with firefox 4 rather than 3.6.x in centos. I know the last pass plugin should work with FF4 and have read suggestions about SSL/TLS version settings (which are 3.0 and 1.0 respectively) and disabling SELinx. Neither of these have made any difference.
View 4 Replies
View Related
Dec 17, 2009
When I search addons with firefox, it takes 4 mins to connect to server, and after approving to ad it, it again takes that much time to connect to download. While downloading it's ok, but connecting to server takes time. This is for all addons. Is there any body having same issue?
View 7 Replies
View Related
Nov 16, 2009
Recently I have installed Fedora 10. It comes with firefox 3.xx by default. Now I was wondering if there is any way through which i can update it to 3.5 version though yum. I have tried yum update firefox but it did not work and returns following messages Loaded plugins: refresh-packagekit Setting up Update Process No Packages marked for Update I know that one way to update is download the latest Tar package and use it, but I want to totally remove my previous installation and use solely one package i.e. firefox 3.5.
View 6 Replies
View Related
Mar 11, 2010
Between Intrepid and Jaunty, the database schema for Tracker changed from QDBM to SQLite FTS. This caused corruption problems for many, the only solution to which (as far as I can tell) was to delete the contents of .cache/tracker. Unfortunately I have many thousands of file tags which I'm not willing to lose, so that isn't an option for me. So I've stuck with Intrepid, waiting for a solution to come along. It doesn't seem to have happened yet.
So ideally what I'm after is some way to convert my file-meta.db file to the current schema, or a way of exporting and then re-importing my tags. Failing that, a way of running Tracker 0.6.6 under more recent versions of Ubuntu would do.
View 1 Replies
View Related
Jul 20, 2010
Since ffmpeg 6 is out for some time, when will Ubuntu Lucid afford such a new ffmpeg package from its repository?
View 2 Replies
View Related
Jan 6, 2011
I want to install Ubuntu (10.10) on the 1TB drive I need to unplug the SSD while installing it in order to dual boot by pressing F8 (the way I want it to be) so that Grub doesn't get installed on the SSD. What I want to know is can I partition the 1TB drive to install Ubuntu without any data corruption or anything? I have read that NTFS can lose data if partitioned with data already on it (I have no way of backing up my 100GB of files on the drive, as currently this IS my backup drive). What I want to do is have 900GB for files, and a 100GB partition (or partitions adding up to 100GB) for Ubuntu- what is the best way to do this? I don't need seperate partitions for ubuntu, can I install the whole thing to the 100GB partition and boot from it? Or do I need swap as well? I was thinking of making 900GB partition, 4GB partition for swap (if needed) and 96GB partition for Ubuntu (/ if I understand) as this is what the "erase entire drive" option creates.
View 9 Replies
View Related
Jan 17, 2011
fixing a text corruption issue / advice for filing a bug report (if necessary). So, generally speaking the stability I am experiencing with Natty is as I expect; I'm fully aware that this is a very very early development release and so all sorts of things can go wrong. I just wanted to point that out So while Gnome/Unity are up and running, graphics run more or less perfectly, the boot process text is completely garbled and if after everything is fully loaded I hit Control+Alt+F1-F6 the text looks like:
* this
* the above image close-up
The above links are supposed to be of the ubuntu login prompt. The problem occurred after running the upgrade command:
Code:
sudo do-release-upgrade -d
As is standard upgrade procedure. Is there anything obvious going on that I can tweak to make it all happy again? Since I have a working GUI.
View 2 Replies
View Related
Jul 24, 2009
During a recent request to install fedora 11, I ran into an interesting problem. It seems that between fedora10 and fedora11, the developers switched from fdisk, to parted for creating the initial pre-mke2fs partition table creation.
It looks like the implementation of this is broken, as it's writing the partition table with overlapping cylinder boundaries. While this can sometimes be ignored, it can in certain cases cause significant data corruption.
On an installation I took it through, using the latest installation media, in both manual & automatic partition creation, the layout looked like this:
The last two partitions turn out fine, for some reason. However, those two partitions should not have overlapping cylinders. After my very first installation, the system was completely unbootable, and not even fsck wouldn't rescue it. If this is possible, then that means that a system that's been online for months or even years could simply drop out of functionality simply due to a byte or two of system-critical data falling on that last cylinder. Considering that a lot of the time kernel data ends up on /dev/sda1 (commonly the /boot partition), this is something that should not be ignored.
View 4 Replies
View Related
Mar 23, 2011
I'm new to the emacs thingy. i just moved back to ubuntu.i have found out how to have emacs load the .el file from the .emacs file but i cant seem to use the addon.http://blogs.unity3d.com/2010/01/15/...ty-javascript/that is the addon i am trying to use.this is my .emacs file:
(add-to-list 'load-path "~/.emacs.d")
;; UnityJS mode for emacs
(autoload 'unityjs-mode "unityjs-mode" "Major mode for editing Unity Javascript code." t)
[code]....
View 2 Replies
View Related
May 28, 2010
Today, I try to update firefox by Package Updater but show error by bellow. "Missing Dependency: xulrunner >= 1.9.0.19-1 is needed by package firefox-3.0.19-1.el5.centos.x86_64 (CentOS5updates)"
View 6 Replies
View Related
Apr 25, 2011
I have installed xampp1.7.3 in "/opt/" directory .
Where i have to install ffmpeg either in web root i.e 'htdoc' or any where?
How to install ffmpeg?
What are the lib has to be installed for converting any movies uploaded by user to avi and capture image from video?
How to configure with php so that ffmpeg is visible in phpinfo()?
View 1 Replies
View Related
Aug 10, 2010
Just wondering if anyone else has this partial upgrade being offered to them: ffmpeg, libavdevice52, libpostproc51, libswscale0 are held back (grayed out) in Update Manager.
I only use Update Manager manager to see if there are any updates and then use sudo apt-get update, sudo apt-get-upgrade and sudo apt-get dist-upgrade to actually examine the updates as it shows if anything will be removed without anything to replace it.
And I know to never do a partial upgrade.
Update Manager displays "Partial Upgrade" with the files listed above grayed out.
I did use sudo apt-get-upgrade to install a few packages earlier that were safe to install and now -
sudo apt-get-upgrade currently gives this output:
Code:
The following packages have been kept back:
ffmpeg libavdevice52 libpostproc51 libswscale0
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded
[Code]....
View 6 Replies
View Related
Feb 24, 2011
I have an assignment as follow. I have to install 2 versions of FFMPEG 0.6.1 and Alexander Strange on non default locations with all required dependencies and check the dependancies for each of these and make sure to install the required dependancies in the local folder of the app rather than at the system root.
The flags to set for the above must include
--enable-mp3lame --enable-gpl --disable-vhook --disable-ffplay --disable-ffserver --enable-a52 --enable-xvid --enable-faac --enable-faad --enable-amr_nb --enable-pthreads --enable-x264
Now how to install them? and how to run them simultaneously? Do let me know if any other thing/info required.
View 1 Replies
View Related
Apr 4, 2011
Today I opened upgrade manager and found some updates grayed out. I could not click them so I went to synaptic to try and install them and got this error:
Code:
ffmpeg:
Depends: libavcodec52 but it is not going to be installed or
libavcodec-extra-52 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed
Depends: libavdevice52 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libavdevice-extra-52 but it is not going to be installed
Depends: libavfilter0 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libavfilter-extra-0 but it is not going to be installed
Depends: libavformat52 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libavformat-extra-52 but it is not going to be installed
Depends: libavutil49 but it is not going to be installed or
libavutil-extra-49 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed
Depends: libpostproc51 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libpostproc-extra-51 but it is not going to be installed
Depends: libswscale0 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libswscale-extra-0 but it is not going to be installed
I am running ubuntu 10.04.
View 5 Replies
View Related
Mar 10, 2010
Ubuntu's team put an alpha unstable version by default into the fresh install of Ubuntu... and... where's firefox 3.6 package now?
View 4 Replies
View Related
Feb 24, 2011
Having trouble with #yum install ffmpeg.
Here's the error:
I added:
View 3 Replies
View Related
Nov 5, 2010
i need to install librtmp for ffmpeg installation on a 64 bit centos machine.
View 1 Replies
View Related
Nov 5, 2010
i am trying to install ffmpeg on centos machine. i need a source installation for this. i used FFmpeg 0.6.1 .tar.gz file for this. Also i want to install this with maximum codec support. when i used the configuration option as
./configure --prefix=/usr/local/ffmpeg --enable-shared --enable-gpl --enable-libx264 --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-libspeex --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-pthreads --enable-libvpx --enable-librtmp --enable-x11grab --enable-version3 --libdir=/lib64 --enable-nonfree
i got an error as ERROR: libopencore_amrnb not found. i tried to find this package but it was utterly failed.
View 3 Replies
View Related
Feb 3, 2011
I am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
View 5 Replies
View Related
Aug 3, 2011
I have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
View 1 Replies
View Related
Oct 16, 2010
openSUSE-11.3-Addon-Lang-i586.iso and openSUSE-11.3-GNOME-LiveCD-i686.iso
Index of /distribution/11.3/iso
And what is openSUSE-11.3-Addon-NonOss-BiArch-i586-x86_64.iso ?
View 1 Replies
View Related
