Security :: Librtmp For Ffmpeg Installation?
Nov 5, 2010i need to install librtmp for ffmpeg installation on a 64 bit centos machine.
View 1 Repliesi need to install librtmp for ffmpeg installation on a 64 bit centos machine.
View 1 RepliesSince ffmpeg 6 is out for some time, when will Ubuntu Lucid afford such a new ffmpeg package from its repository?
View 2 Replies View RelatedHaving trouble with #yum install ffmpeg.
Here's the error:
I added:
i am trying to install ffmpeg on centos machine. i need a source installation for this. i used FFmpeg 0.6.1 .tar.gz file for this. Also i want to install this with maximum codec support. when i used the configuration option as
./configure --prefix=/usr/local/ffmpeg --enable-shared --enable-gpl --enable-libx264 --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-libspeex --enable-libfaac --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-pthreads --enable-libvpx --enable-librtmp --enable-x11grab --enable-version3 --libdir=/lib64 --enable-nonfree
i got an error as ERROR: libopencore_amrnb not found. i tried to find this package but it was utterly failed.
I have installed xampp1.7.3 in "/opt/" directory .
Where i have to install ffmpeg either in web root i.e 'htdoc' or any where?
How to install ffmpeg?
What are the lib has to be installed for converting any movies uploaded by user to avi and capture image from video?
How to configure with php so that ffmpeg is visible in phpinfo()?
Just wondering if anyone else has this partial upgrade being offered to them: ffmpeg, libavdevice52, libpostproc51, libswscale0 are held back (grayed out) in Update Manager.
I only use Update Manager manager to see if there are any updates and then use sudo apt-get update, sudo apt-get-upgrade and sudo apt-get dist-upgrade to actually examine the updates as it shows if anything will be removed without anything to replace it.
And I know to never do a partial upgrade.
Update Manager displays "Partial Upgrade" with the files listed above grayed out.
I did use sudo apt-get-upgrade to install a few packages earlier that were safe to install and now -
sudo apt-get-upgrade currently gives this output:
Code:
The following packages have been kept back:
ffmpeg libavdevice52 libpostproc51 libswscale0
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded
[Code]....
I have an assignment as follow. I have to install 2 versions of FFMPEG 0.6.1 and Alexander Strange on non default locations with all required dependencies and check the dependancies for each of these and make sure to install the required dependancies in the local folder of the app rather than at the system root.
The flags to set for the above must include
--enable-mp3lame --enable-gpl --disable-vhook --disable-ffplay --disable-ffserver --enable-a52 --enable-xvid --enable-faac --enable-faad --enable-amr_nb --enable-pthreads --enable-x264
Now how to install them? and how to run them simultaneously? Do let me know if any other thing/info required.
Today I opened upgrade manager and found some updates grayed out. I could not click them so I went to synaptic to try and install them and got this error:
Code:
ffmpeg:
Depends: libavcodec52 but it is not going to be installed or
libavcodec-extra-52 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed
Depends: libavdevice52 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libavdevice-extra-52 but it is not going to be installed
Depends: libavfilter0 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libavfilter-extra-0 but it is not going to be installed
Depends: libavformat52 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libavformat-extra-52 but it is not going to be installed
Depends: libavutil49 but it is not going to be installed or
libavutil-extra-49 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed
Depends: libpostproc51 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libpostproc-extra-51 but it is not going to be installed
Depends: libswscale0 (>=4:0.5.1-1ubuntu1.1) but 4:0.5.1-1ubuntu1 is to be installed or
libswscale-extra-0 but it is not going to be installed
I am running ubuntu 10.04.
I tried to install ffmpeg for Firefox videodownloader addon but did some nasty damage. First of all, I followed this guide: [URL] I'm using Ubuntu 10.10 Maverick 32-bit version The installation froze after this: Quote: Unpacking replacement x11proto-core-dev ... Couldn't find anyone having the same issue on the net, so I just exited the terminal and then I couldn't do anything anymore. When I tried to install again (or remove) that thingy, i got this in console:
[Code]....
love security/pentest tools. This script adds ALL the tools from the Security Spin, plus Metasploit. Feel free to modify it if need be.
View 12 Replies View RelatedIs it possible to install security lab menu on a normal Fedora 13 installation? I don't want to use security spin.
View 14 Replies View RelatedThe default Firewall ufw is not enabled by default at the time of installation and it has to be enabled by the user.Isn't this a security risk or is the user whether ufw is enabled or not secured from external threats?I am not much knowledgeable about network security But I am trying to understand the Ubuntu mentality behind this default setting.
View 4 Replies View Relatedi have tried but it wont work i use this command
ffmpeg -i /opt/torrent-storage/d@v!o/My Chemical Romance/Three Cheers For Sweet Revenge/01 Helena.mp3 Helena.swf
I'm currently running ffmpeg from a windows machine and realized it's rather redundant as I could be running it from the Debian (headless server) machine instead. What I'm trying to achieve is to get ffmpeg running as a background job...
Effectively, as far as I've gathered, this should be enough:
Code: Select allffmpeg -re -hide_banner -i "LIVE_INPUT_1" -f "LIVE_OUTPUT_1" &
But it's not working - when I run the command from terminal to check it, it works fine... but when I try to run it as a background job it creates the job but no output is generated. According to posts around the web, other people have been successful at running background jobs like this for transcoding static files.Should it be done differently or is this an issue with ffmpeg itself?
If anyone is interested i have rebuilt ffmpeg with amr support, for those having trouble converting files to 3gp etc....only 64bit rpms [url]
View 1 Replies View RelatedI would like to start working with webm (On2 vp8 codec) with ffmpeg.Are there any packages available for ffmpeg that have the necessary support for creating .webm videos? But I still unable to successfully encode to webm with ffmpeg.Am I missing anything obvious?I want to avoid compiling a new ffmpeg as I am currently doing commercial video work and don't want to risk "breaking" my machine.
View 6 Replies View RelatedI'm trying to convert a .MTS video file to .mov, and I need to use ffmpeg, because I want it to be scriptable.I managed to convert the file to .avi using this command:Code:ffmpeg -i INPUT.MTS -vcodec libxvid -b 18000k -acodec libmp3lame -deinterlace -ab 192k -s 1280x720 -r 50 OUTPUT.avi
View 3 Replies View Relatedyesterday tried to install ffmpeg with yum. but package not found. so i found the webpage about updating dag.repo and trying again. that didn't work.
So i ram yum update. that took 5 hours but still yum install ffmpeg gave me package not found. yum can't seem to find anything now.
Code:
I could stream the following file at my darwin server it means i am able to stream .mov files with 8KHz sampling rate and 20kb/s bite rate.
Quote:
# ffmpeg -i streamingloadtool.mov
FFmpeg version SVN-r10524, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --enable-libxvid --enable-gpl --enable-libamr-nb --enable-libmp3lame --enable-libfaac --enable-libfaad
[code]....
The problem is i unable to stream this kuraiamr_nb.mov file at my streaming server. when i play this file in quicktime player its stating that this is a unsupported media type.
I am looking for an option to convert .vob file to mp4 format. Command "ffmpeg -i S.vob x.mp4" is giving error message "[libfaac @ 01cac110] Unable to load libfaac.dll". I tried to convert in other formats like .avi with the same command and got success. Conversion is decreasing the quality like hell. Though size of the file after conversion is as big as original then why this bad quality. Some where I have read if I will not specify any argument it will keep the quality same but here it is not happening. Not sure why....
View 2 Replies View RelatedI've been going bonkers trying to get an m4b audiobook converted to mp3. I've tried putting ffmpeg -i <infile.m4b> -acodec libmp3lame -ar 22050 <outfile.mp3> into terminal where "infile" is the filename I want converted and "outfile" is the new filename, but I keep getting the error message "bash: syntax error near unexpected token 'newline'"
What am I doing wrong?! I have tried sound converter, but it hates me and crashes.VLC told me "It seems your FFMPEG (libavcodec) installation lacks the following encoder: MPEG Audio layer 1/2/3."
I download ffmpeg from repository with command svn checkout svn://svn.ffmpeg.org/ffmpeg/trunk ffmpeg
after cd /home/username/Desktop/ffmpeg
./configure --enable-shared --enable-gpl --enable-nonfree
make
make install
after that if i call ffmpeg I will obtain this error ffmpeg: error while loading shared libraries: libavdevice.so.52: cannot open shared object file: No such file or directory
what can i do?
How do I convert an ovg to avi file?
Why was ffmpeg removed in Jessie?
I read through more of this thread than I wanted to. [URL] ....
Does libav provide command line utilities to do something like converting ovg to avi, or determining the length of an mp3 file? Why is there absolutely no explanation as to why libav was preferred over ffmeg?
You want to cut lets say a 15 minute video into 10 minute video, removing the first 5 minutes of it using ffmpeg?s?
View 8 Replies View Relatedits been a long time since i was last on here, (2006)
I am trying to compile ffmpeg (and libraries) but im stuck. I am running x86_64 FC11 and want to compile 32 bit binaries so i can post them online for people to download, and mine is different then the ones hosted by the yum repo's.
here is what the output is
Code:
[rbehera@roflmao ffmpeglinux]$ ./configure --cpu=pentium3 --arch=x86 --enable-cross-compile
[rbehera@roflmao ffmpeglinux]$ ./configure --cpu=pentium3 --arch=i686 --enable-cross-compile
[Code].....
Is there an easy way to enable libfaac in ffmpeg? I'm hoping to not have to compile it myself, but it appears that it was compiled without libfaac support. Not sure if what I'm using is from rpmfusion, but it's enabled.
View 9 Replies View RelatedI have some video clip and I want to add a title in its buttom center. For exemple, My clip is video.mp4 and I want to add the title "hello world".Does ffmpeg (or mencoder) enables me to do this?
View 2 Replies View RelatedI use this command line to transcode media file
Code:
ffmpeg -i in.ts -y -threads 2 -vcodec libxvid -b 300000 -bufsize 8192 -g 300 -s 320x240 -aspect 4:3 -f mp4 -pass 1 out.mp4
[code]....
Anyone else SUDDENLY getting this??? Still trying to find why this is happening...
Code:
FFmpeg version 0.6.2-rpmfusion, Copyright (c) 2000-2010 the FFmpeg developers
built on Apr 12 2011 16:45:34 with gcc 4.5.1 20100924 (Red Hat 4.5.1-4)
configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64
--mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
[Code]...
I installes ffmpeg according to [URL] The program works (i get textoutput) but i am doing something wrong i think. Whet i enter
Code:
ffmpeg -i TheHitList{2011}DVDRIP.Jaybob.avi -title hitlistpsp -f psp -r 29.97 -b 512k -ar 24000 -ab 64k -s 320x240 M4V00001.MP4
i get
Code:
[root@Koen-PC sadaci]# ffmpeg -i TheHitList{2011}DVDRIP.Jaybob.avi -title testfilmpsp -f psp -r 29.97 -b 512k -ar 24000 -ab 64k -s 320x240 M4V00001.MP4
[Code]....