I've been using Ubuntu for a while as a dual boot but I want to get rid of Vista. If I do an Ubuntu fresh install with a wiped hard drive, will it detect my hardware and download drivers? I'm using a laptop but I can get connection with an Ethernet if it's needed.
View 4 RepliesSo, I am having certain issues regarding Debian installation. Since my Wi-Fi card, Intel PRO/Wireless 3945ABG, requires non-free drivers not provided within Debian install image, I am bound to use USB stick during installation process to get those drivers, iwlwifi-3965-1.ucode and iwlwifi-3965-2.ucode, to enable Wi-FI on my system. However, no matter what I do, I cannot get debian-installer to detect drivers present on the machine. I have tried virtually everything - downloading drivers from multiple sources, renaming drivers properly, using ext4 instal of fat32, using gpt instead of msdos, placing files in /firmware instead of root directory - but no matter what I do, the outcome is the same. USB stick seems to be working properly. Am I bound to downloading non-free image now, or is there a solution?
View 9 Replies View Relateddownload the newest 64 bit driver via gui? as after my upgrade from 9.10 i am stuck with gui..i found codes for installing it in gui so that should be ok, but ive not found any codes for downloading it..although from what ive seen it should not be too hard..
View 4 Replies View RelatedI have ubuntu installed on my compter. My sisters friend installed it but when he did, he said that he had trouble getting it in. so now all i have on my comp is ubuntu (which it doesn't work properly) and my cd rom drive is not working at all, it's like I don't even have one because the drivers for it aren't installed. I have an Acer Aspire 1620 laptop, can anyone tell me how I can download the cd/dvd rom drivers for it and where I'm suppose to put them on ubuntu? and if anyone knows where I can download the drivers
View 2 Replies View RelatedI've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies View RelatedI'm new to this community and very new to fedora Linux. I'm learning how to use this OS and am enjoying it immensely thus far, but it's not been an easy road lately with this speaker. See, my netbook has really crappy speakers so I picked up an Insignia USB Soundbar so I could get much better sound out of it. However, it won't recognize the USB and I'm assuming this means it can't download the necessary drivers in order to work. Now I've researched this and came across this forum:[URL]...
However, being as new as I am to this, I can't make heads or tails to what this means. If anyone can offer help to what this forum might be saying or how I might be able to get the speakers to work,
I installed Ubuntu 10.4 on my laptop compaq presario CQ50 I cannot go online, because the drivers does not exist ? where can I download them? the wireless flash blue by the way, and it was working before I switch to Linux is there anyway to find driver for my wireless compatible?
View 5 Replies View RelatedI've been trying to get online for the better part of a week now with no luck. I can't get my network up to download drivers for my hardware - without the drivers I have no GUI so I'm stuck trying to do this in text mode.
View 14 Replies View RelatedNo wireless networks can be recognized in Ubuntu, and now after several attempted fixes, my wireless toggle button won't switch from orange to blue. My wireless card is Atheros AR5001. I posted in the absolute beginners forum, but I've played around so much that I think I can move on to this one I'm so sorry if posting another thread is bad etiquette, but I need to have wireless access by Friday morning, and am slightly desperate.
Attempted fixes: First, I installed the backport modules using Synaptic. Then, I installed the madwifi driver. After those failed, I used ndiswrapper to install the Windows driver (linked from the ndiswrapper page). I made sure to disable the madwifi driver and restart first. My output all looks normal--I blacklisted everything mentioned in google searches. Here is the current output of ndiswrapper -l:
Code:
ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in
[code]...
I recently installed fglrx proprietary drivers. Upon reboot, gnome stopped working - the classical "something has gone horribly wrong" message showed up. Surprised, i switched to KDE plasma display manager, and it worked flawlessly.So I opened up Konsole, and typed: gnome-shell --replace.I received this output:
Code: Select all(gnome-shell:3729): GLib-CRITICAL **: g_strsplit: assertion 'string != NULL' failed
(gnome-shell:3729): Clutter-CRITICAL **: Unable to initialize Clutter: The OpenGL version could not be determined
(gnome-shell:3729): mutter-ERROR **: Unable to initialize Clutter.
Trace/breakpoint trap
which led me to think that gnome is not able anymore to detect my display driver. It is however working well: glxgears gives the usual values, and glxinfo does detect the correct driver.I thus searched the web for that error, and the only results that showed up were about changelogs / some obscure things.The xorg.conf seems perfect to me: pointing to the correct drivers, and having the correct values.I am having Debian Jessie with an r9 290x on the proprietary Omega drivers.
I'm using Xubuntu Natty at the moment, on an Acer Aspire 5739G. Figured I would go to Realtek's site and get the most recent soundcard driver, since the built-in subwoofer has never worked on Linux for me.
I used the automatic install script, then when it tried to probe for other devices, suddenly I had no sound.
I'm currently getting
Code:
korin@corrosion:~$ aplay -l
aplay: device_list:240: no soundcards found...
I tried reinstalling the ALSA driver, but to no avail. I now have no sound, and no idea a) why this failed, and b)
I tried to do Debian netinstall from minimum iso image in my brother's pc. My Network Interface card is Intel 82578DC GIGABYTE Network Connection. The installer gives a list of drivers to install but I don't know what to do. Should I download and install from first CD/DVD? Will it have appropriate drivers then?
View 5 Replies View RelatedMe and a friend tried downloading the latest 10.12 amd drivers for 64bit and when trying to install it fails the md5 hash, tried different browsers too same issue.
This is for a HD5770 64bit.
I need to download 'Windows Wireless Drivers' from the Ubuntu Software Centre but I cannot as I do not have an Ubuntu computer with an internet connection (hence the need for the application).
Would it be possible for someone to email it to me so I may put it onto a removable storage device and install it onto my Ubuntu computer?
If not; are there any alternative solutions (other than Madwifi).
I just installed ubuntu 9.10 32bit on my compaq 6000.I have a nVidia Corporation NV17 [GeForce4 MX 420] graphic card, and I wanted to install the proper drivers.I tried to use Hardware Drivers, but when it tries to activate the "NVIDIA accelerated graphic ... ... (version 96)", it starts a download and then it simply stops doing anything.I also tried to use EnvyNg, which also started downloading and stopped.I also tried to install manually the "NVIDIA-linux-x86-96.43.01-pky1.run" (which was what Envy recommended) but1) I'm a Noob and most forums said "don't mess with your graphic card if you'e not confindent enough"2) when I dosudo /etc/init.d/gdm stopsudo sh NVIDIA-linux-x86-96.43.01-pky1.runit says that I don't have a precompiled kernel interface, and something about kernel sources not matching current kernel (but "gcc -dumpversion" shows the same as "cat /proc/version").
View 1 Replies View RelatedI have recently purchased a Toshiba satellite pro C650 laptop. I have installed Ubuntu 10.04 via Wubi which has installed ok and boots fine but it fails to recognise my Wifi card or network so I am unable to download any drivers. It also sees my dvd rom drive but not any usb ports or other hardware. I have searched the Toshiba site but cannot find a fix on any of the Linux forums there.
View 13 Replies View RelatedI've tried a number of locations, that may have old proprietary ati drivers for the 9250 v/c (video card for any one who was wondering). currently using ubuntu 10.10, and from what I've read else where either my card is too old or my OS is too new. I have seen a few site (2 or 3) for old ati drivers, but they are for microsoft, not linux.
I went to the AMD web site down loaded and attempted to install the latest drive, but to no avail. I've used the software center provided by ubuntu, I have the latest drivers from them, unfortunately can't play any of the non-flash games, either using wine, plays on linux and cedega. From what I have read (and please correct me if I'm wrong) I need to install the old drivers provided by x.org xfree86 or ati.
Where can I download the latest Red Hat drivers for AMANDA?
View 2 Replies View RelatedWhere it is possible to download CentOS 5.3 with the last updatings of a kernel, drivers?
View 13 Replies View RelatedA few sectors on my Hard drive on my toshiba laptop are having issues, so i have to load Ubuntu (9.10 i believe) from a USB drive. Is is still possible to save things, download programs, drivers, and anything so i can still use most of ubuntu's features without everything resetting after a reboot?
View 1 Replies View RelatedWhen you download linux drivers for devices such as wireless dongles, you'll get a folder full of random files that I'm assuming oyu need to compile? How do you install a wireless driver in linux?
View 3 Replies View RelatedMy book is Dell-I1524D-128 with Beze1 with Camera, these days I need chatting with my parents, but it is cant used with my camera in CentOS. I dont know can i download the drive from here?
View 1 Replies View RelatedWell i installed debian 6.0 squeeze in my AMD Athlon X2, Gigabyte board with 2 GB Ram & 500GB hdd.
I have Samsung Laser printer ML 1666. I need drivers to work with it. instructions to download and install for debian 6.0.
Just got a Lexmark Pro200 wireless printer. Can anybody tell me where and how to download the relevant drivers to print using WiFi?. Went to Lexmark.com and downloaded what i thought was the correct driver and the system installed them but cannot find them. When i plug in a usb cable a message tells me that i have connected the correct printer, However when asked to search Lexmark does not even show up on the list to select and search. Was successful on my wife's Windows laptop and after trial and error on my Mac Mini.
View 2 Replies View Relatedwhere can i download linux drivers / PPD file for epson lq-590 dot matrix printer? I have tried printing with the driver for epson lq-570+ but the print quality is not up to the mark
View 1 Replies View RelatedHow do I install Drivers for logitech c100 webcam in kiwi 10.08?
I am dyslexic. Is there a command for install webcam drivers that I can copy and paste to terminal window?
Here at home I have several Ubuntu installations, mine, the kids computers and a couple of laptops. What I'm looking for is a solution or a pointer in the right direction to setup on our local Ubuntu server a sort of cache. Each day each Ubuntu on the network, checks for updates and downloads, and installs. What I'm looking for is a way for one machine to download the update and then the others to download from the local resource.
A sort of local cache to try and minimise everyone downloading straight from the net for pretty much the same updates. I did a emerge cache many years ago when I was using Gentoo, so I'm wondering what I can use/do here with Ubuntu as we are all loving this distro now.
This is our first time choosing and installing linux. Our other servers are all windows 2008 x64. We were told to install fedora 13. I can only find a download for the desktop version and we're looking for the SERVER x64 download. Could I please get a link?
View 7 Replies View RelatedI've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
I installed maverick meerkat but for some reason there was no install to free space option so I installed onto 32gb of my 170gb windows vista installation. I NEED THAT INSTALLATION. Maverick Meerkat cannot detect my windows installation!
View 9 Replies View Related