where can i download linux drivers / PPD file for epson lq-590 dot matrix printer? I have tried printing with the driver for epson lq-570+ but the print quality is not up to the mark
View 1 RepliesI have installed fresh fedora 12 & installed many softwares in rpm & tar forms , also i used yum to do installation, all these attempts were successful. But i could not install & configure Epson Dot matrix FX-2175 printer. Epson Dot matrix FX-2175 printer worked fine in my earlier distro fc11.
View 4 Replies View RelatedI have installed ubuntu 10.10 netbook remix on my eMachines 350 netbook.. so far, it works good aside from the printer and the built-in SDcard reader.
1. I have tried installing the database driver for epson( dot-matrix printers) but i was out of luck until i have installed the SCP(sorry if I forgot/misrepresented the name) driver which made my printer working.. However, the print quality is a total mess.. broken letters and etc.. (ribbon is brand new) Can someone tell me how to solve this?
2. Having said that I finally solved issue #1, and the printer prints the way it should be, how would I configure my netbook to print wirelessly via a wifi router.. (I was able to do this with windows computers wherein a printer is shared on the network) however, I find it hard to do this in ubuntu since I am not that familiar with this. Note that when I go to system>admin>printing it shows the windows 7 computers in the homegroup but when I search for a shared printer, nothing shows up.. (I know, I'm a NOOB!)
3. This is the last one, I would feel great if we could at least solve this together.. the built in CARD READER is not working on my eMachines EM350 netbook..
I bought an Epson workforce 520 printer and I need to install the drivers to make it work on Maverick Meerkat. where to get the drivers and how to install them.
View 9 Replies View RelatedI'm new to openSUSE and have only used Ubuntu. I have a Epson Stylus NX110 all in one printer. All I really care about is the print capabilities, scanning is a secondary issue. Suse recognizes the printer but doesn't have a driver for it. On Ubuntu I had to use the NX105 drivers but they worked just fine.
View 3 Replies View Relatedtrying to configure an old Epson LX 400 dot matrix printer with cups. I really need this printer to print vauchers. System is Debian SID, latest cups 1.4.3 cups was recently change to reject lsusb printing and now uses libusb. lsusb sees printer, but does not name it:
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1a40:0201 TERMINUS TECHNOLOGY INC.
[code]....
My Operating system is Ubuntu 10-4 that I have just installed.
View 6 Replies View RelatedI have a parallel port Epsom LX 400 dot matrix printer. In the printer proprieties menu it says for make and model Epson 9-Pin Series which it what it is.It's ok when I print directly to the port.
cat file >/dev/lp0
Using Mandriva 2010
i am using rhel5 & want to install wipro lq540 dot matrix printer on my system , i don't have product cd suggest me the right way to install printer manually, also this printer name is not listed in the printers list of rhel5 printer configuration menu
View 1 Replies View RelatedI am trying to find a printer driver or PPD file for the Konica Minolta Bizhub c200 network printer.
I am running Ubuntu 10.0.4 and we currently only have drivers available for Windows XP, however I do not have a PPD file available.
I have been trying for a while now to get hold of drivers but searching google did not return anything as yet.
Is there anyone out there that might be able to assist me in getting this printer installed on my notebook?
I just can't find... why is my code seg-faulting?
PHP Code:
/*
Code name: Assignment #7.
File name: slice.c
Program name: Matrix multiplication (parallel version).
Version: 1.
[Code]...
Is giving my a seg-fault right at the ending point where I do the final gather from the MASTER processor.
I have been using the Lucid since about Xmas time as my main Distro. Up until Sunday when I did a fresh Install of Lucid 10.4 final release my epson printer was working, now it isn't even listed in the printer list, but it is still found with lsusb.
View 3 Replies View RelatedI have a Epson stylus T11 printer. It used to work fine with Ubuntu 9.04. After I upgraded my OS to 10.04, it is not working.
Here is my output.
It says its printing but doesnot print anything. I have tried a lot of forums including LQ, but no solutions.
The lsusb command gives me the follwing:
I have been using epson stylus T11 printer on ubuntu 9.10 for about six months, but after I upgraded it to 10.04, the printer is not working properly. It is working fine with other distributions.
View 1 Replies View RelatedLooking over the sane project for the epson GT-S50 scanner I see it lists requires DFSG non-free esci-interpreter-gt-s80 Does anybody know if one is writing their own scripts with bash and scanimage if that requirement of DFSG is still required under ubuntu (Karmic or lucid)????
View 1 Replies View RelatedThis is a file for printer drive Epson TX100, does any one know who to install it?
pips-snx100-debian4.0-3.3.0-CG.install
the original was :
pips-snx100-debian4.0-3.3.0-CG.tgz
I ordered a new printer yesterday... I am intending on using it with my Macs, but I am thinking I may want to print on it from my HP netbook running suse linux..The printer is an EPSON WorkForce 610 C11CA50201.
Does wifi printing work on linux? I haven't read anything saying it does, nor have I seen anything that says it doesn't.I also wanted to know if wifi scanning worked.
I've been trying to get my Epson NX420 printer to scan for about three months now, and I finally got it working. Here's how:
1. Go to [URL] and search for your printer. Select distribution and version and answer a couple of other questions.
2. Download pipslite_1.5.0-2_i386.deb, (or the 64-bit version), and all the iscan*.deb files (again, appropriate to your system).
3. [CRITICAL] Go to [URL] and download this 8.04 package which worked just fine for me on 10.10.
4. Use the Software Center or GDebi or sudo dpkg -i the .debs in this order:
1) libtdl3, which is a dependency for Step 2.
2) pipslite
3) iscan-data
4) iscan-network
5) iscan
(If you use a USB connection, you don't need the iscan-network file.) This got my NX420 scanner up and running just fine. Installing libtdl3 was the key; in fact, I used the Debian Lenny package.
using "pclinuxos"my all in one epson sx100 psc is installed and working ,as is the scanner,they are both configured in the control center,?? how do i view the ,"change ink,clean print head options please" .you may have read an earlier post from me (now clicked as solved) when i was using "mint 9", i never did get it to work,
View 1 Replies View RelatedSince 2009 we are using Linux Redhat and all printers are working well. But when I have done Redhat's UPDATE I found all matrix printers (Epson LQ-590) not printing. Those printers are connected to the network by a printer server. When I do "lpr -Pprintername /etc/hosts" the printer prints the file but it not formats characters.
To print from my application, I create a file driver which looks like
"lpr -PP112" in /usr/spool/uv/t112.dvr
The first version was looked like
#!/bin/bash
#
# $6: Imprimante (nom Universe)
#
export LOGFILE=/tmp/uv-smbprint-$6
date > $LOGFILE
echo $6 >> $LOGFILE
cat - > /tmp/prn.$6.$$
cat /tmp/prn.$6.$$ |lpr -P $6 -o raw -h >> $LOGFILE 2>&1
rm -f /tmp/prn.$6.$$
exit 0
Now this old version works with the HP LaserJet printers. But on the matrix Epson printer it can't work I put lpr - Pprintername or lp
-onobanner -Dprintername to print something.
The problem steel in formatting text when I print on all matrix Epson printers.
I can't use my printer/scanner - it is an Epson TX110. When I try to use Image scan - I get the message; "Could not send the command to scanner. Check the scanner's status."
There is nothing wrong with the MFC apart from not working on Ubuntu 9.10. I have had it connected to another computer that ran Ubuntu 9.01 (I think that was the release used) and it ran fine but now I'm stuck -
I have drivers installed but cant get them to co-operate with me.
I am running ubuntu 10.04. I have an Epson Wprkforce 310 4 in 1. Connection is USB. I can print. I have searched for proper drivers for scanner and fax. I have found nothing for fax. I have found and installed at one time or another the following scanner drivers:
iscan_2.21.0-6.ltdl7_i386.deb
iscan_2.26.1-3_i386.deb
iscan-data_1.6.0-0_all.deb
iscan_2.26.1-3.ltdl7_i386.deb
The 1st 3 installed but nothing happened. When I installed the 4th, I got a message telling me about the scan app I have installed(default with ubuntu install). Hope welled up inside. When I opened the scan app, it said it could not find a scanner. WF 310 was on hoping for a driver.
I downloaded the .rpm file for pipslite-1.4.0-5 and tried to install it using YaST, but it needs "libgdk-1.2.so.0". I was given the error "nothing provides libgdk-1.2.so.0 needed by pipslite-1.4.0-5.i386. I am currently running 32-bit OpenSUSE 11.3. Can anybody help me with installing pipslite? I googled libgdk and I notice that it's in gtk+, but I don't know how to install that either.
View 7 Replies View RelatedI have an epson cx7800 printer/scanner that 11,3 doesn't detect on USB. I tried Yast-Hardware-printers and Yast-Hardware-printers and nothing is discovered/detected.
Are there repos for this stuff and is there a tutorial like the one for graphic card theory I could peruse?
I'm trying to configure my SX205 printer. It is well recognized, and Gutenprint driver are available. But the printer doesn't work, here are the error messages :
The PPD version (6341210) is not compatible with Gutenprint 5.2.5.
I am on opensuse 11.3; so the gutenprint version is 5.2.4, i don't know why it talk about 5.2.5. I have tried cups-genppdupdate but it doesn't change anything.
I tried to configure this printer and clicked on "add printer" but the drop down menu did not contain my printer. Does this mean that the printer driver does not exist?
When I tried to print out a test Open Office document it came up with "printer error" However Open Suse did recognise my printer as a DX6000.
[URL]
I am searching for a printer driver for my Epson Stylus NX420 Printer/Scanner. Should I use a generic Epson driver from the extensive default list, or is there a better driver out there? re: I'm running OpenSuse 11.2 and KDE
View 1 Replies View RelatedI want to setup my Epson Stylus (515W)-A letter before the 5 but not sure what. Basically when I open CUPS I click on add on new printer, I enter add printer but then the page says access denied. Also this is a network printer.
View 2 Replies View RelatedI have an Epson SX100 multifunction printer which is a year old but rarely been used. The on/off light keeps flashing but I can't get anything else to function. The cartridges move into place but if I press any of the buttons nothing else moves - can't print, scan or photocopy - no other lights showing. Have to pull out the cord to turn it off.
From previous Epson printers I've had I know there are ways to override cartridge empty lights etc and wonder whether someone knows how to re-set this printer. Have had an online chat with Epson but as soon as they know it is just out of guarantee they point you in the direction of the repair shop and it is just not worth paying for a repair as it would cost more than the printer.