Ubuntu Installation :: Complete List Of 10.10 Repositories?
Mar 17, 2011Does anybody have a complete list of Ubuntu 10.10 repositories?
View 2 RepliesDoes anybody have a complete list of Ubuntu 10.10 repositories?
View 2 RepliesI am running Suse 11.1 64bit, with KDE, recently I received a pop up on my screen, "something about update problems", I used Yast 2 and selected online Update and it couldn't find updates for Nvidia and froze at that point. I dis-enabled that repository and refreshed all of the remaining Repositories individually and it seemed to work. I then went to the repositories listing and selected "Add" and selected "community" repositories and received the following: WARNING Unable to download list of repositories or no repositories defined. What is my problem? How do I acquire the list of community repositories? I can live with out the Nvidia repository for now but would eventually like to get it back.
View 2 Replies View RelatedI'm experiencing a strange issue with my Ubuntu 10.10 since a few days:when trying to update the packages list, a lot of repositories are ignored.Here is the output of
Code:
sudo apt-get update | grep -i ign
.
Quote:
Ign http://extras.ubuntu.com/ubuntu/ maverick/main Translation-en
Ign http://extras.ubuntu.com/ubuntu/ maverick/main Translation-en_GB[code]....
How come all these repositories cannot be hit?is there any way to make the update hit there repositories? And if they're useless, no longer supported, how can I remove them so to have a tidy repositories list?
I am running Suse 11.1.I do the following:
Click on Software Repositories
Click Add
Click Community Repositories
Click Next.
I receive an error, "Unable to download list of Repositories or no repositories defined."
in the /etc/YaST2/control.xml the external repository is:download.opensuse.org/YaST/Repos/openSUSE_111_Servers.xml
I need a list of all the packages that are on a new ubuntu install. This is for a script I am trying to write.Does any one know where I can get this without doing a clean install and running dpkg -l?P.s. even better would be being able to find out if a package was on the pc when it was a clean install.
View 5 Replies View RelatedI just installed ubuntu because the newer versions were not working for me. So I installed 7.10 and there is no repositories that are still up. Is there any repositories that I could add from the newer ones or other distro repositories.
View 8 Replies View Relatedtoday i finished my first debian lenny install. x86 version. i ran into problem with sources.list # deb cdrom:[Debian GNU/Linux 5.0.4 _Lenny_ - Official i386 CD Binary-1 20100131-18:53]/ lenny main deb cdrom:[Debian GNU/Linux 5.0.4 _Lenny_ - Official i386 CD Binary-1 20100131-18:53]/ lenny main
# Line commented out by installer because it failed to verify:
#deb http://security.debian.org/ lenny/updates main
# Line commented out by installer because it failed to verify:
#deb-src http://security.debian.org/ lenny/updates main
# Line commented out by installer because it failed to verify:
#deb http://volatile.debian.org/debian-volatile lenny/volatile main
# Line commented out by installer because it failed to verify:
#deb-src http://volatile.debian.org/debian-volatile lenny/volatile main
Were can I find a complete list of commands for the terminal in ubuntu linux 9.10
View 9 Replies View RelatedI'm tying to find a way to print or export my entire sources list. /etc/apt/sources.list doesn't seem to be the full list.
View 6 Replies View RelatedI am new to OPEN SUSE. I installed 11.4 without any problems. It is working fine. I did Multimedia install with oneclick option. All the updates were done. Today while going thru forums FAQ, I saw repositories list and their priorities. When I checked my repositories in YAST, there was no PACKMAN so added the PACKMAN repository. I noticed in Software Manager there is Upgrades OpenSuse-release 11.4-1.8 - 11.4-1.9! What does this mean?
View 1 Replies View RelatedAfter testing Opensuse 11.4 since it was released, I decided to go back to version 11.3. After installing 11.3 I find I cannot add the community repositories, such as Nvidia, Packman, etc. It attempts to download the repository list but gives the following error message : Unable to download list of repositories or no repositories defined. I've used this DVD before and it installed perfectly. I then tried installing 11.3 from a network cd but got the same error when trying to add a repository. At this point I don't know what to do. Joe
View 3 Replies View RelatedI was hoping that there may be a place where I can get a complete list of every application that is included in the Anaconda installer.I want to use it so that I can develop a matrix with my CTO to determine which apps we should install. I've searched for this on Google and other search engines without success.
View 9 Replies View Relatedi want to knw where can i find the list of all the repositories from where rpm and yum fetches the package and also the location where all the packages are installed by rpm and yum
View 2 Replies View RelatedIve seen some fixes for this but they all seem to be specific to the particular user's sources.list . . . ..
Code:
Here is Line 54
Code:
I tried to change the basic toolbar to cairo dock,a tutorial that i found told me to write in terminal gksu gedit /etc/apt/sources.list.d/winehq.listso i write it and a window opened,i couled not find the text that told me(the tutorial i mean)so i closed the window,after that i keep taiking the same error
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
E: The list of sources could not be read.
Go to the repository dialogue to correct the problem.
E: _cache->open() failed, please report.
now whene i got in the winehq.list the text has gone and i take this error in update manager,my software center doesn't work and my terminal whenever i type sudo commands says
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
I have Ubuntu 10.04 installed in my laptop through a windows installation and I want to make a new, complete, install so I can boot directly in Ubuntu (and change some configuration choices I didn't get right in the first place). Is there any (as simple as posible) way to save my actual data (users, software installed, personal files...) as a whole so I can "install" all that back to the "new" Ubuntu installation?
View 4 Replies View RelatedHow will be complete windows login after installation wubi? How to make choice between load windows and linux?
View 3 Replies View RelatedI ran Ubuntu 9.10 back in the days and when 10.04 Beta 1 was released I upgraded it by using the update-manager -d. My question is, if I use the upgrade-manager -d feature will it be like an actual beta 2 when it gets released and later on will it be the same as the full final version. Or must I do a complete re-installation if I want to run the final version of 10.04?
View 1 Replies View RelatedI am running Fedora 8. Each time I run a YUM command, I get the message that there are unfinished transactions, and to run yum-complete-transaction. Upon running yum-complete-transaction, it fails with this error. How can I remove this uncompleted transaction so I can finish the last one?
View 2 Replies View RelatedHow can I be sure to complete the update?
Updating from 9.10 to 10.04 LTS with some 'stop'
new kernel not in use, and grub setup, using 'local'
the now new 10.04 LTS as it calls itself is loading and large parts working.
After I downloaded and installed the software "Aircrack" from the Synaptic Package Manager and restarted the PC, I still could not find Aircrack under Application or System. Can anyone advise me if I need to do more to complete the installation of Aircrack?
View 3 Replies View RelatedLooks like I waited too long to upgrade from 9.04 to 9.10. Now the Update Manager wants to take my system to 10.04, but then says it is 'not supported with this tool'.Do I need to do a complete re-install of the OS? Is there a reasonable way to get to 9.10 without a complete re-install?
View 2 Replies View Relatedi am having a problem installing ubuntu 10.10. i had windows vista and used ubuntu inside windows with no problem. then, i wanted to reset my vista to its factory conditions (just to clean up space and get rid of hidden or unnecessary things) using the recovery disk - and the recovery disk partially worked, removed my os and didn't 'restore' anything. so i decided to just go all the way to ubuntu anyway, which was the plan all along, just sooner now.
i have the disk and i can easily make it to the 'try ubuntu' feature. however, when i try to actually install ubuntu, i make it all the way to the 'who are you page?' but the 'forward' button isn't accessible (which is how i noticed something might be wrong). this happens whether i try to install after trying ubuntu or if i try to direcly install without trying it first. i fill in the data, the installation says it's copying files, etc... and then, when it's done, it says 'ready when you are'. that's it. i can't click on 'forward', and none of the 'information about ubuntu' features and pics scroll by while the setup is taking place. i can't do anything at this point. the system isn't really frozen but it just does nothing. (i thought i might have to restart the computer but the only options i have are 'hibernate' and 'suspend'. also, once i manually restart everything it reloads all over again. when i take the disk out and restart, i see NOTHING. the vaio logo comes on, then the screen goes black and i see the cursor prompt but nothing else at all and i can't do anything at all.
I'm trying to install Ubuntu 10.10 on a computer that's already running Windows Vista. I used the Wubi installer and it seemed to go through the installation fine (using the desktop, amd64 iso file). After rebooting, I get the dual boot option. However, on Ubuntu start-up, I get a display with the message stating Verifying Installation Files. It seems to go through some verification, but then it gets stuck. I see a bunch of lines with the words "ubuntu ubiquity" with hexadecimal values and regular words. The last hexadecimal values to appear are: 7f2698c50d8e, 7f2698fca815; the last regular word is "_target".
If I quit out of the verification, I am able to get onto the desktop area, but a message appears stating a parted_server crash occured. Also, my wireless connection doesn't work, but I suspect I need to install a driver.
I have downloaded the Wheezy DVD 1 and started the istallation process. The installation time is strangely very short in respect to the Squeeze release, anyway
The GRUB installation step fails. I terminated the installation without a bootloader and rebooted from DVD with the rescue boot option.
Now I asked for a console to try to manually install the bootloader but the following command:
# grub-install /dev/sda1
[where sda1 is my root partition]
gets the following message:
/bin/sh: grub-install: not found
What can I do?
Decided to upgrade my 8.04 server to 10.04 today. Everything went smooth when I tried to install in vmware. When I tried to install it on my real machine the installation hangs at 74% Storing Language...
I've checked the disk and I tried different ways to install (different language, both keyboard and system). The first two attempts the installer just turns off and the computer reboots. This third time it just hangs. how to debug and solve this problem?
It's the x86_64 version. I'm using the standard options all the time including LVM on whole disk.
I am trying to move my installation from my wubi drive to another drive, i use LVPM, but the listed partitions in LVPM, doesnt mention which partition is which , the available space in each partition is not listed, there are 5 partition in the MOVE section in LVPM, any clues of how to find out which is which, please urgent help, performance is not perfect with the WUBI installation.
View 1 Replies View RelatedWhen I visit packages.ubuntu site, I see dapper, maverick etc. What are these? Also I need to install complete gcc, g++ and dependencies. How to do it?
View 2 Replies View RelatedI was installing 10.04 as a dual boot with Win7, the install was interrupted and now I can't do anything with it. Booting, I get as far as '[0.541227] kernal_thread_helper' and it stops there with or without a disc. How do I complete the install or strip out something so that I can start again?
View 6 Replies View RelatedThe update manager recommended seven updates today. I get an error message when I try to update.
Error message reads code...