When I visit packages.ubuntu site, I see dapper, maverick etc. What are these? Also I need to install complete gcc, g++ and dependencies. How to do it?
View 2 RepliesLooks like I waited too long to upgrade from 9.04 to 9.10. Now the Update Manager wants to take my system to 10.04, but then says it is 'not supported with this tool'.Do I need to do a complete re-install of the OS? Is there a reasonable way to get to 9.10 without a complete re-install?
View 2 Replies View RelatedDecided to upgrade my 8.04 server to 10.04 today. Everything went smooth when I tried to install in vmware. When I tried to install it on my real machine the installation hangs at 74% Storing Language...
I've checked the disk and I tried different ways to install (different language, both keyboard and system). The first two attempts the installer just turns off and the computer reboots. This third time it just hangs. how to debug and solve this problem?
It's the x86_64 version. I'm using the standard options all the time including LVM on whole disk.
I was installing 10.04 as a dual boot with Win7, the install was interrupted and now I can't do anything with it. Booting, I get as far as '[0.541227] kernal_thread_helper' and it stops there with or without a disc. How do I complete the install or strip out something so that I can start again?
View 6 Replies View RelatedI just installed ubuntu 11.04 (64-bit) on my system. I mounted / on my SSD and /home on my HD. The installation proceeded for a while and then I suddenly got a message that the installer crashed. Nevertheless the installed linux seems to work and I can boot in Ubuntu. Not sure what exactly is wrong now that the install didn't complete. Any way for me to check what went wrong and what exactly I can do to make sure my system is ok? All appears ok but appearances can be deceiving.
View 1 Replies View RelatedI'm trying to make a complete install of ubuntu 10.4 on an old PC.When I boot from the CD, a text screen is displayed: "PhoenixBIOS Utility"
Code:
BIODate: 09/14/99
CPU type:celeron
[code]....
I want to install fedora 14 completely to a USB drive, not the live USB but a complete installation. I am using linux after a long gap of 9 years and have forgotten most of the things.
View 1 Replies View RelatedWhen I boot into Debian 8, I pull up a terminal and as root enter "apt-get install xfce4"... It then tries to install but asks for the install DVD. When I insert the USB it will not install from it. It doesn't even acknowledge that it was inserted. It is only looking for a DVD drive. How can I make it pull the files from the usb installer stick?
View 2 Replies View RelatedI was able to do this before but, I can't remember where I found the link.I think is was a script or something. It would get all the files that the .Deb will need and make an installer.
P.S. I have Ubuntu 64-bit the PC that need the install is a 32-bit both are 10.04.
I'm running Kubuntu 10.10 and am trying to change my bootscreen so I installed StartUp-Manager and then I tried to install usplash, but I get this error which makes me slightly confused:
sudo apt-get install usplash
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
Previously apt-get has been happy to install dependencies. I'm new to Linux so if you need any more information just shout and I'll edit that in.
I'm trying to install Ubuntu on an Aspire laptop with Windows XP. I downloaded 10.04 and burned an ISO image. I boot Windows and open the ISO disk. I open the first choice which is to try Ubuntu prior to a complete installation. The installation starts and proceeds for a few minutes. Then it stops and displays a message 'Permission Denied' and a suggestion to check the installation log. The last few lines are:
[code]...
I'd like to update /etc/apt/sources.list with all the packages available on packages.debian.org and packages.ubuntu.com without apt-get, aptitude, and synaptic then trashing my system by trying to update all the obsolete packages. (I'm stuck with 8.04) I only want to update the packages / install new ones with their dependencies as I request them. How do I do that?
View 9 Replies View RelatedI have Ktorrent installed via the repositories and its always worked perfectly. Today I ran software update with KPackageKit and it installed updates. It told me that KTorrent had to be removed to continue and without thinking I hit ok. Now my KTorrent is gone. When I try to install it on the terminal with
Code:
sudo apt-get install ktorrent
it gives me this error.
Code:
$ sudo apt-get install ktorrent
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]...
The following packages have unmet dependencies:
ktorrent : Depends: ktorrent-data (= 4.0.3-0ubuntu1) but 4.0.5-3ubuntu1~maverick1~ppa1 is to be installed
E: Broken packages If I remove and reinstall ktorrent-data it doesn't help. build-dep doesn't help. autoremove and then trying to reinstall doesn't help. I'm not running some strange dev version of anything. I have a standard Kubuntu 10.10 amd64 installation and my KDE version is 4.6.2 from the regular repositories. I run updates (standard repositories) almost every day and have never seen anything like this before.
i just installed ubuntu and i wanna put wine on so i can install my itunes and adapters an so on. but when i try to install through terminal it always reads that theres no file found or cant complete installation. and theres no net hooked up to it cuz the wireless adapter wont work.
View 3 Replies View Relatedi want to install package say PHP5 i have all the dependencies packages of php5 in a folder.or say i have all the packages in a folder and i want to install using dpkg
but when i try to install the main package it say these dependencies are missing.there are more than 40-50 packages so its not possible to install manully first one package and then another.eg:
Code:
bhupinder packages # dpkg -i apache2_2.2.17-1ubuntu1_i386.deb
(Reading database ... 140101 files and directories currently installed.)
Preparing to replace apache2 2.2.17-1ubuntu1 (using apache2_2.2.17-1ubuntu1_i386.deb) ...
Unpacking replacement apache2 ...
[Code]...
now i have to install rest of the package manually ...is there any solution so that i can install it with single command...???
I installed the Eclipse IDE using Ubuntu packages. (Version 3.5.1. Package name:eclipse).A few days back, version 3.5.2 was released. I would like to update, so I added the following websites to the list of available ones:
[URL]
I then tried with Check for Updates. While on my Mac installation this results in an update to 3.5.2, on Ubuntu the program says there is nothing to update.If I try to install manually, choosing Install New Software and the then selecting the Eclipse Platform 3.5.2, I get the following error:
Cannot complete the install because of a conflicting dependency.
Software being installed: Eclipse Platform 3.5.2.M20100211-1343 (org.eclipse.platform.ide 3.5.2.M20100211-1343)
Software currently installed: Eclipse Platform 3.5.1 (Eclipse Platform 3.5.1)
Only one of the following can be installed at once:
[code]....
it is possible to update the packaged verison of Eclipse or if I should install the binary from the website?
Installing from a CD, and F13 constantly freezes at the same spot - "Checking dependencies in packages selected for installation" - gets stuck 1/3 to 1/2 thru.
Dell Dimension 2400, Celeron 2.4GHz, 768MB memory, 120GB drive.
I've used same CD set to install several other systems so CDs are good.
I am trying to install fc11 on an intel mb with pentium4 and ati graphics
the install always hangs at the point where the sw packages have been selected
and the install is checking dependencies.
I have tried the regular install
the basic video install, and text install
with the same symptoms each time
the dvd drive lite is on and the hard disk activity lite is on and the system is frozen.
have to power off.
I have fc11 installed on another system (amd) and had install issues also but that was
with the preview.
A game I found recently through an web repository. Downloaded the all neded dependencies and .rpm files, but cant install them.. terminal output below:'
Code:
[root@localhost Downloads]# yum localinstall luola-1.3.2-2.fc6.rf.i386.rpm luola-levels-1.3.2-1.0.rf.noarch.rpm luola-debuginfo-1.3.2-2.fc3.rf.i386.rpm
[code]....
I have just newly installed Ubuntu10.10 on my laptop and am attempting to install VirtualBox 3.2.10. Everything has been going fine until I run the apt-get install command. The results are as follows:
Code:
bn0@n0v0n:~$ sudo apt-get install virtualbox-3.2
Reading package lists... Done
[code]...
i have a system that consist of fedora and xp which is dual boot configured, every thing is fine .when i tried to install deepofix mail server ,it prompted to select entire hard drive or existing partition(free space) when i selected option as free space, suddenly it showed "installation is complete reboot the system " yet i have to configure a lot more things such as network,ip,dns. i dont know what is the problem .Nothing is installed after that ,the same process repeats every time, when i try to install. Still i have 8gb free space in my disk
View 1 Replies View Relatedwhen i do a paravirtualised install coz fully grey out (how do you get round this) and ftp install path is ftp://192.168.1.1:65354/bie764.iso
i get error:
Unable to complete install 'exceptions.ValueError Invalid install location: Opening URL ftp://tj:tj@192.168.1.1:65354/bie764.iso failed.
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 724, in do_install
dom = guest.start_install(False, meter = meter)
[code]...
does it not accept ftp passwords.. what ftp server program (with autostart so it works with crossover linux as i know no other way start apps with that. can try to insta wine but need rpm) will work
I have Ubuntu 10.04 installed in my laptop through a windows installation and I want to make a new, complete, install so I can boot directly in Ubuntu (and change some configuration choices I didn't get right in the first place). Is there any (as simple as posible) way to save my actual data (users, software installed, personal files...) as a whole so I can "install" all that back to the "new" Ubuntu installation?
View 4 Replies View RelatedHow will be complete windows login after installation wubi? How to make choice between load windows and linux?
View 3 Replies View Relatedi'm using Ubuntu 9.10. I just installed koffice (Version 1.x) which includes kformula.
Then i realized that koffice 2.x is already available which seems to be called "koffice-kde4" in the repositories... But koffice-kde4 doesn't have kformula included - where is it?
how i could install the complete koffice 2?
I wanna install flash in my machine.... from where do I install complete flash in my ubuntu.
View 3 Replies View RelatedI've tried about a billion times to get this to install correctly to no avail. This is the amd64 desktop edition, but I've tried with the 32 bit as well. I have a lenovo W500. The system never boots off the USB. It gets through a bit, with text output, and then stops. Sometimes it doesn't even give an error message, and other times I get something like udev failed while loading some pci device. I've tried re-downloading the iso several times, different USB keys, different USB key creators, CDs, to no avail.
I then thought, well, heck with it, I'll just install 10.10 and upgrade. Nope, there's a GPG key error for some bizarre reason, which is tripping up apt, but it's not going to tell me what key that is so I can go and get it (and apt-key update does nothing). Command line upgrades fail similarly. So finally, I go for broke and try to just install the thing with Wubi. Of course, that eventually crashes too.
I ran Ubuntu 9.10 back in the days and when 10.04 Beta 1 was released I upgraded it by using the update-manager -d. My question is, if I use the upgrade-manager -d feature will it be like an actual beta 2 when it gets released and later on will it be the same as the full final version. Or must I do a complete re-installation if I want to run the final version of 10.04?
View 1 Replies View RelatedI am running Fedora 8. Each time I run a YUM command, I get the message that there are unfinished transactions, and to run yum-complete-transaction. Upon running yum-complete-transaction, it fails with this error. How can I remove this uncompleted transaction so I can finish the last one?
View 2 Replies View RelatedI'm looking for a way to install kdebase 4.7 with no additional dependencies. My target is home desktop and I only want these : kdm, plasma, ark, dolphin, kdesu, konsole, okteta, kwrite, kate, kmix, ksnapshot. There are things I don't use but they get installed anyway and break kdm if removed. These things are : akonadi, strigi, nepomuk, virtuoso, kfind, kgreeter and a couple of others, including libqtzeitgeist0 and PIM in general. Also I don't want kdm 4.7 features hence I use kdm3 as a login manager. Is there a 4.7 build that doesn't mind the removal of so called base components? If not, is there a 4.4 repo for 11.4?
View 9 Replies View Related