OpenSUSE Install :: YaST - Repositories List And Their Properties
Mar 12, 2011
I am new to OPEN SUSE. I installed 11.4 without any problems. It is working fine. I did Multimedia install with oneclick option. All the updates were done. Today while going thru forums FAQ, I saw repositories list and their priorities. When I checked my repositories in YAST, there was no PACKMAN so added the PACKMAN repository. I noticed in Software Manager there is Upgrades OpenSuse-release 11.4-1.8 - 11.4-1.9! What does this mean?
View 1 Replies
ADVERTISEMENT
Mar 20, 2011
I did zypper dup to move from 11.3 to 11.4. Almost everything works fine. But when I try to add community repositories I get the 11.3 repositories, not the 11.4 repositories. So there must be a .conf or .rc file somewhere telling yast that we're on 11.3 when in fact we are on 11.4. How/where can I change that? And while we're at it, how do I load a Factory repository? They do not appear in the list of Community" repositories.
View 9 Replies
View Related
Jan 12, 2010
I am meeting some problems on my opensuse 11.2 system in the last week, I see an higher load on CPU and the system seems to swap a lot of time. Checking on dmesg I found that at boot time I have a lot of errors: I paste a little part of the full log at the end of this post
If I am not wrong I have found and installed an official opensuse 11.2 kernel update through zypper some days ago Moreover, actually I am not able to use yast package manager because it seems to crash during repositories refresh (or just after it)
[Code]...
View 2 Replies
View Related
Jun 14, 2011
I hope this is the right forum in which to post this but I am currently running SUSE 11.2(I know im a couple versions back, its a long story but this box has been in storage for awhile) but the problem I am having is with updating SUSE and accessing the repositories through the Yast Software Installer. When I open it I get several variations of this message:
Download failed:
File '/repodata/repomd.xml' not found on medium '[URL].. I think this must have something to do with an old repository not being up but im not exactly sure how to fix this.
View 7 Replies
View Related
Feb 6, 2011
I have old laptop that I intend to give away to a child who's family, due to bad financial, has no means to afford it.
I'll quote Ken Starks: "A Child's Exposure to Technology Should Never Be Predicated On The Ability To Afford It"
I have installed openSUSE 11.2 with KDE (as this one works perfectly on that laptop), but I wish to put it in one of the languages (ordered by preference)
1. Serbian
2. Croatian
3. Bosnian
During and post installation there were neither of those languages available.
View 2 Replies
View Related
Feb 9, 2011
I am running Suse 11.1 64bit, with KDE, recently I received a pop up on my screen, "something about update problems", I used Yast 2 and selected online Update and it couldn't find updates for Nvidia and froze at that point. I dis-enabled that repository and refreshed all of the remaining Repositories individually and it seemed to work. I then went to the repositories listing and selected "Add" and selected "community" repositories and received the following: WARNING Unable to download list of repositories or no repositories defined. What is my problem? How do I acquire the list of community repositories? I can live with out the Nvidia repository for now but would eventually like to get it back.
View 2 Replies
View Related
Apr 29, 2011
After testing Opensuse 11.4 since it was released, I decided to go back to version 11.3. After installing 11.3 I find I cannot add the community repositories, such as Nvidia, Packman, etc. It attempts to download the repository list but gives the following error message : Unable to download list of repositories or no repositories defined. I've used this DVD before and it installed perfectly. I then tried installing 11.3 from a network cd but got the same error when trying to add a repository. At this point I don't know what to do. Joe
View 3 Replies
View Related
Jan 30, 2011
I am running Suse 11.1.I do the following:
Click on Software Repositories
Click Add
Click Community Repositories
Click Next.
I receive an error, "Unable to download list of Repositories or no repositories defined."
in the /etc/YaST2/control.xml the external repository is:download.opensuse.org/YaST/Repos/openSUSE_111_Servers.xml
View 9 Replies
View Related
Jul 29, 2010
I tried to add another repository to yast (Index of /repositories/mozilla/openSUSE_11.2) and when I was done, Yast gave me an error message and now no repositories show up.
The error is: "/etc/zypp/repos.d/_mozilla_openSUSE_11.2.repo:Line 2 is missing '=' sign"
How do I fix this? How do I get my repos back? I took a look in that directory and this is what is in it:
Code:
[_mozilla/openSUSE_11.2
]
name= mozilla/openSUSE_11.2
enabled=1
autorefresh=1
baseurl=http://download.opensuse.org/repositories/mozilla/openSUSE_11.2
path=/
type=rpm-md
keeppackages=0
View 9 Replies
View Related
Jun 18, 2011
when i tried to open my software management(repositories) in YaST i saw a pop up window it says PackageKit is still running(probably busy)Ask PackageKit to quite again.i can't quit that.i tried to quit it via system activity.Because of this i can't open software management(repositories).it is also not working.how to quit PackageKit?
View 4 Replies
View Related
May 22, 2011
I recently installed 11.4 32bit on my computer at my summer home. I carry a DVD with all my /home data. Then today I noticed that all my repositories are labeled "11.3" repositories. Everything works. Here is the output from "zypper lr -d"...
# | Alias | Name | Enabled | Refresh | Priority | Type | URI | Service
[Code]....
What is the correct method of moving to the 11.4 repositories?
View 5 Replies
View Related
Jul 2, 2010
I'm having problems with Kstars and would like to know the proper place to post questions or if there is a forum just for the Kstars program. I can't find much info on the net. If I remember right it worked in Ubuntu 8 but I've upgraded to the latest and some options in Kstars are not working now. In a nutshell, some of the problems are:
1: Help not working. I get....Could not Launch the KDE help center: Could not find service 'khelpcenter'
2: In telescope wizard, there is no list of telescopes.
3: I cant save my telescope information under properties.
As I'm just learning this stuff, it could be a bug but not sure, so please point me in the right direction for help. I'm running dual boot on a HP laptop. Windows XP and Ubuntu. I have reformatted the drive and installed everything new for a clean slate.
View 2 Replies
View Related
Nov 11, 2010
I'm looking to have an 'access control list' tab of file/folder properties in Nautilus.
I have eiciel installed and i thut thats supposed to take care of it. What am i missing to get it to look like the pic?
View 1 Replies
View Related
May 22, 2011
I have been using YaST to install software. It has been working probably. But yesterday when I want to use it again. I can goto that SUI (blue screen) but I just can't go into the software management. and then I try the other options. None of them can't be used.
View 9 Replies
View Related
Dec 1, 2010
The rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:
Code:
rsync -rlpt -hi -stats rsync.opensuse.org::opensuse-full /drive/repo
Errors:
[code]....
View 5 Replies
View Related
Feb 24, 2010
From a fresh install of OpenSuse 11.2 64 bit the default is KDE. But if you want to install both KDE and Gnome on the same machine. I got to Yast --> Patterns --> And tick Gnome Desktop Environment and Gnome Base System.
That inturn pops up with a dependency issue. That states the following:
#### YaST2 conflicts list - generated 2010-02-24 13:18:37 ####
pattern:gnome-11.2-20.22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided
uninstallable providers: patterns-openSUSE-gnome-11.3-1.1.1.i586[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.3-1.1.1.x86_64[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[openSUSE 11.2-0]
patterns-openSUSE-gnome-11.2-20.22.1.i586[repo-oss]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[repo-oss]
[ ] do not install pattern:gnome-11.2-20.22.1.x86_64
[ ] break gnome by ignoring some of its dependencies
[x] deinstallation of patterns-openSUSE-kde4_pure-11.3-1.1.1.x86_64
#### YaST2 conflicts list END ###
So my question is what exactly does removing and applying the Gnome pattern do. Because it seems to change alot more than just branding. It changes the default environment to GTK. How would go about reverting the pattern back to KDE after the install of all the correct Gnome Dependencies.
View 5 Replies
View Related
Dec 12, 2010
I can get the installation history via the command line:
Code:
rpm -qa --last | less
Is it not possible to get it from YaST in the same way as you can in Synaptic? It would not only be nice to see a basic list, but also what has been pulled in as dependencies and have it grouped by 'installation sets'. Too much to ask?
View 4 Replies
View Related
Jul 23, 2011
I don't know why this is happening, however, all of a sudden I am unable to install any packages (from OpenSUSE repos of course) using either Zypper from the CLI or YaST2. Every time I try and install anything, or perfom a zypper dup, I am greeted with the below error message.
Code:
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
I'm no stranger to OpenSUSE's package manager, however I have yet to come across this error before.
View 2 Replies
View Related
Mar 16, 2010
when in command line (because i cannot start plasma either) i get an error message stating [/usr/lib/YaST2/bin/y2base: symbol lookup error: /usr/lib64/libstdc++.so.6:undefined symbol: _ZNst_num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE2idE, version GLIBCXX_3.4] i would like to know how bad it is and if it can possibly can be fixed
View 9 Replies
View Related
Jun 8, 2010
Anyone know what happened to the nvidia repos and are they going to come back up?
Can't access it through yast, ftp, or a web browser.
View 2 Replies
View Related
Jul 20, 2011
The updates used to happen automatically in 11.4 but the last few weeks no updates at all even if I do it manually in yast still no updates is this normal?
View 9 Replies
View Related
Mar 17, 2011
I get the following error when YAST tries to install the latest updates----Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index----could it be from removing KWALLET? Now I cannot re-install it due to this error.
View 9 Replies
View Related
Jan 14, 2010
I am trying to install openSuse 11.2 from netinstall disk into a vmware virtual machine under vmware server 2 (free edition). The installation process starts ok, but later i receive a warning indicating that the opensuse repository can not be found. (download.opensuse.org/distribution/11.2/repo/oss /)I have checked the network setup and works perfectly, also i can ping download.opensuse.org from console successfully.
View 4 Replies
View Related
Jan 29, 2010
If you go to Vuze: The most powerful bittorrent client in the world. you'll see that you can download a tarball for linux. But, if you're like me, you'd rather get the RPG so you can use YaST to install it, allowing you to add vuze to your application launcher and desktop. After digging through google for the rare RPG files for the latest version of vuze.
Step 1: Download the swt libraries RPM here: ftp://ftp.pbone.net/mirror/packman.i...m.6.1.i586.rpm - ( original link found on this page )
Step 2: Download the Vuze RPM here: ftp://ftp.pbone.net/mirror/packman.i...1.1.noarch.rpm (original link found on this page)
The Vuze package needs the swt libraries pre-installed, so download that one first. In just two clicks, you'll have the latest version of Vuze installed by YaST on your system! BTW, this is my first post and first thread in these forums. I just installed SUSE on Tuesday and it's my first Linux OS I've tried.
View 3 Replies
View Related
Nov 18, 2010
Is it possible to configure Yast Software Manager module so that it does not completely exit when done installing a package? It get's annoying to search for a package and install it, the software manager exits, you then have to reopen it, install another etc. a few minutes later.
Seems this would be a config option, but if so I can't seem to find it.
View 5 Replies
View Related
Nov 20, 2010
I cannot open YaST nor 'install software' in the GUI. A new window is appears in the panel, but after 10 seconds or so it disappears. When in terminal, i can open YaST.
This happens from time to time and often after a while I can open it again in GUI (also when rebooting). It's very annoying when I want to install something and I cannot open Yast2 (I'm not familiar with terminal, so that's why i want to stay with GUI, which is KDE btw).
View 1 Replies
View Related
Nov 28, 2010
I have a problem when trying to update or install new application via Yast, I'm using opensuse 11.3. PackageKit Error repo-not-available: Failed to download /content from Index of /distribution/11.3/repo/oss
View 9 Replies
View Related
Apr 25, 2011
As I have had some problems using kpagager I've used file asociations to set yast as the default. When I download an rpm the yast icon bounces around for a while and then dies. I assume this means I need another set of yast launch instructions. Suppose I could download to a directory and set it as a repo but would rather just have it launch for rpms as it's quicker. 11.4 KDE 4.6.0
View 9 Replies
View Related
Nov 13, 2009
i had the problem that i couldn't surf access the internet while DNS and PING worked well. That i solved with ipv6.disable=1 at boot time. Now i can suf the internet with a browser but YAST is still unable to access the repositories which are accessible with a browser. Can someone please help me what the problem with YAST is?
View 9 Replies
View Related
May 18, 2010
When I am closing yast, from time to time I get this error. Although something segfaults the system seems to behave normally and I do not experience other issues it seams. The error comes up in a small separate window. Yast stays operative. Should I be worried about something? What is the system complaining about actually? Although this happens quite often, it does not happen always.
System is: 11.1 with Linux linux-xu0v 2.6.27.45-0.1-default #1 SMP 2010-02-22 16:49:47 +0100 x86_64 x86_64 x86_64 GNU/Linux and KDE 3.5.10 (r87) Yast: 2.17.69-0.1.1-x86_64
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_klauncher.so
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_kded4.so
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running.
[Code]...
View 2 Replies
View Related
