I need a list of all the packages that are on a new ubuntu install. This is for a script I am trying to write.Does any one know where I can get this without doing a clean install and running dpkg -l?P.s. even better would be being able to find out if a package was on the pc when it was a clean install.
View 5 RepliesDoes anybody have a complete list of Ubuntu 10.10 repositories?
View 2 Replies View Relatedtoday i finished my first debian lenny install. x86 version. i ran into problem with sources.list # deb cdrom:[Debian GNU/Linux 5.0.4 _Lenny_ - Official i386 CD Binary-1 20100131-18:53]/ lenny main deb cdrom:[Debian GNU/Linux 5.0.4 _Lenny_ - Official i386 CD Binary-1 20100131-18:53]/ lenny main
# Line commented out by installer because it failed to verify:
#deb http://security.debian.org/ lenny/updates main
# Line commented out by installer because it failed to verify:
#deb-src http://security.debian.org/ lenny/updates main
# Line commented out by installer because it failed to verify:
#deb http://volatile.debian.org/debian-volatile lenny/volatile main
# Line commented out by installer because it failed to verify:
#deb-src http://volatile.debian.org/debian-volatile lenny/volatile main
Were can I find a complete list of commands for the terminal in ubuntu linux 9.10
View 9 Replies View RelatedI'm tying to find a way to print or export my entire sources list. /etc/apt/sources.list doesn't seem to be the full list.
View 6 Replies View RelatedI was hoping that there may be a place where I can get a complete list of every application that is included in the Anaconda installer.I want to use it so that I can develop a matrix with my CTO to determine which apps we should install. I've searched for this on Google and other search engines without success.
View 9 Replies View RelatedI bought a pc with ubuntu 9.10 pre-installed today. Unfortunately there's a problem with the network connection, i.e. I don't have any. The mb is a Foxconn A74ML series with onboard LAN. I've switched cables with another PC and it didn't have any effect. The other PC is still connected to the internet and the new one is still not connected. How I can/should do to get a connection?
View 5 Replies View RelatedI just got a new Toshiba Satellite 64bit laptop with 4bg of ram and a 640gb hard drive, I want to dual boot windows 7 and Ubuntu 10.04 Lucid Links and I had the guys at Best Buy make me a partition so that if something went wrong with the partition it would possibly be on them. the issue I'm running into is that I can't seem to figure out how to boot to the "S" partition on my hard drive when installing Lucid Links via a USB key.
View 5 Replies View RelatedI have always had to use windows etc, of course this means I have become accustomed to the way the programs are automatically installed etc... so my question is:
Once I have found appropriate software which I would like to add to my computer, (which is Linux Compatible)... what are the steps, in the simplest terms to start using it?
To confirm, I have got to the stage where the program is on the computer but as no "window" pops up... I am fairly lost to get it from the completed downloads to actually start using it... is it an option like extract? Could you give me the basic steps.
Is it possible to make a live CD which will contain a video card driver that can be used by the PC it is running on?
View 2 Replies View RelatedWhere can I find all the preinstalled and default wallpapers of Fedora (current and all past versions)? Is there an archive or repository somewhere?
View 1 Replies View RelatedI am trying to install Fedora on my computer but I am getting a kernel panic at liveCD boot after boot menu. It occurs to me for F13 and F14 (all x64, F14 x86 seems to boot fine but I'm trying to host a x64 guest OS on it so I need to get the x64 version to work)
My system specs:
Dual Opteron 265
4GB RAM
Asus K8N-DL (nVidia nForce Pro 2000, BIOS 1010)
I also tried to install F14 in some other computer (which worked flawlessly) and put the HDD into the computer in question, which gave me the same kernel panic.
When configuring certain programs for compilation from source it's required to include path to required libraries/packages. I don't know how to obtain that information. For example, how do I know the installation prefix for openssl on my system? It's not in the default directory (/usr/local/openssl).
View 3 Replies View RelatedI am running Fedora 8. Each time I run a YUM command, I get the message that there are unfinished transactions, and to run yum-complete-transaction. Upon running yum-complete-transaction, it fails with this error. How can I remove this uncompleted transaction so I can finish the last one?
View 2 Replies View RelatedIve seen some fixes for this but they all seem to be specific to the particular user's sources.list . . . ..
Code:
Here is Line 54
Code:
I tried to change the basic toolbar to cairo dock,a tutorial that i found told me to write in terminal gksu gedit /etc/apt/sources.list.d/winehq.listso i write it and a window opened,i couled not find the text that told me(the tutorial i mean)so i closed the window,after that i keep taiking the same error
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
E: The list of sources could not be read.
Go to the repository dialogue to correct the problem.
E: _cache->open() failed, please report.
now whene i got in the winehq.list the text has gone and i take this error in update manager,my software center doesn't work and my terminal whenever i type sudo commands says
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
I get this error message: E: Malformed line 57 in source list /etc/apt/sources.list (dist parse)
I am pretty new to Ubuntu and dont really understand computer
Here is the sources list (??) as well
don't know much, but when I tried to update I get this error:
E: Type 'sudo' is not known on line 52 in source list /etc/apt/sources.list E: The list of sources could not be read.
All I want is for my bootloader to show "Ubuntu" & "Windows XP" which are the only 2 OS's I have installed (dual booting). At the moment it shows Windows XP, Ubuntu, Ubuntu recovery mode & like 2 more.. which are also Ubuntu & recovery mode. I've never selected the other Ubuntu ones, only the first one. So, how can I remove the ones I don't want to show on the list.
View 2 Replies View RelatedThere is a problem with my source list (apparently) I'm running 11.04 if that helps.When I try to use apt-get install update for example, I get: "Malformed line 59 in source list etc/apt/sources.list"The same error occurs when trying to access synaptic package manager, it tells me there is a malformed line and the list of sources cannot be read.This error prevents me from apt-getting anything, updating and i suspect it is affecting the software center too.
View 6 Replies View RelatedHow can I convert a file with a lot hex numbers into the decimal?
Example: file1
0x59999
0x5acdc
0xffeff
I want to start $ cat file1 | util | cat >file2 and get file2 with smth like
[Code]...
How would I list 4 users ID numbered 10, 11, 12 and 13 from my users list and output them to a file busers where their names are numbered by ascending order? How would I accomplish that on a one line command?
View 4 Replies View RelatedI am trying to get this script to work. The purpose is to download a list of modules from the slax.org the list consist of a list of module numbers. What I am trying to do is Download the file or the file name corresponding to the number in the list.the list is comma delimited. this is what I have done so far and I am a stand still.
#!/bin/sh
# Wget script to retrieve modules from slax.org modules
#
# ----Begin of user defined values -----
# Path to wget
[code].....
I understand there is a file that stores the repositories' information, but I can't find it!Is there a way I can create a list of what applications have been installed?The idea is that if I am running a backup, finding a way to save the repository list and applications installed so if I am upgrading, or fixing a borked system by re-installing Fedora, I could copy the repo list back, and run the applications list like ode:yum install <cat apps.txt?> and get all of the applications I've installed via Yum without having to remember them all?Is there anything else, outside of /home, I should look at backing up? SELinux settings?
View 6 Replies View RelatedI am working for a community where several people are engaged for 4 different development projects. we are planning to have a samba server to store our data.Now the problem is that I have created a share in which @groupa, @groupb and @groupc are allowed to read and write. But three of the members of @groupb are only allowed to for read permission only.
View 1 Replies View Relatedlist the 'chkconfig --list' in alphabetical order
View 3 Replies View Relatedone command to list the list of folders/ within the folder.
View 4 Replies View RelatedI have my task list in evolution (mainly so it can sync with my phone and online task list) but I always forget to look at the task list. Is there an application or plugin which periodically displays the contents of the tasklist or even better, it briefly displays the most urgent/important tasks when I login? Or anything else which automatically displays the most important tasks. Currently I have to open the task list and look at them (which I usually forget). I do not mean some kind of alarm when the task is due but more a daily reminder of what to do.
View 3 Replies View Relatedhow do I save installed packages in a list and restore ...
rpm -qa > installed-software.log
yum install $(cat installed-software.log)
sorting rpm packages by size
rpm -qa --qf '%{SIZE} %{NAME}
' | sort -n
whenever I try and boot the computer begins to load correctly, but after the scrolling ubuntu splash, I just get a black screen.
64bit Ubuntu 9.10