Ubuntu Installation :: XP Will Not Boot After Lucid?
Jul 21, 2010
After installing lucid, if I select xp at startup all that appears is a flashing cursor. I have read other threads that report the same symptoms but I'n not familiar enough with grub to tell if I have the same problem. Below is output from boot info script.
<code>
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
[Code]....
View 2 Replies
ADVERTISEMENT
May 13, 2010
I have a dual boot system with Win XP and Ubuntu (using grub boot menu). I recently upgraded my Ubuntu from 9.04 (Jaunty) to 10.04 (Lucid) and now I cannot boot into Ubuntu - I just get a desktop with no icons or disk activity. I think this may have something to do with the fact that I answered 'no' when asked whether to replace my menu.1st file, and possibly some others. So my boot menu still refers to 9.04.
View 9 Replies
View Related
May 17, 2010
I have 2 laptops a Dell & a Toshiba. Both have NVidia GeForce FX Go 5200 cards. I first did an upgrade on the Dell and that ended in a BSOD. I used the Alt CD for that. I just received the Live CD in the mail. I put it in the Dell and ended with a BSOD. I figured as much. What got me is that I couldn't get 9.1 to boot after that. It kept trying and would shut done. After the 4th time it booted. I hope it continues.
I thought I'd try it in the Toshiba and it went fine LIVE. I can't install it on that machine as it's my recording only lappy. 10.04 is pretty but can't tell much else.
View 9 Replies
View Related
Jun 7, 2010
cannot boot into Windows XP following uograde from karmic to lucid.
It comes up on the grub list at the start but when I select it I just get a flashing cursor.
Below is the results I get from a boot info script
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for /boot/grub.
[Code]....
View 6 Replies
View Related
Sep 19, 2010
I have managed to install Ubuntu 10.40 LTS over the weekend and I have got it working... sort of.
My only remaining issue is that I am unable to boot into the Hard Drive where Ubuntu is installed unless I boot from the Live CD and select 'Boot from first hard disk'.
I have checked to make sure my boot priority sequence is correct, and it is, but without the Live CD, if I try to boot I get to the 'load operating system' screen and nothing would happen from there, just a blinking cursor.
I am not dual booting, but I do have 3 internal drives. I have made sure that the drive I am trying to boot to is in fact the drive that Ubuntu has been installed on. I also checked to see if Grub was installed which it didn't appear to be, but has since been installed.
My basic cpecs are:
Processor: AMD Phenom II 550 DualCore 3
Video Card: Gigabyte ATI HD5450 512MB
MOBO: Gigabyte GA-770T-USB3
View 5 Replies
View Related
May 2, 2010
I have an AMD64 system, which I recently upgraded to Lucid 10.04. The system now fails to boot after the upgrade. Recovery mode makes no difference.
When I attempt to boot, I get a series of messages about file systems needing checking, and also some messages from ureadahead-other. (process terminated status 4), though a post here says that status 4 is in fact not an error.
I have sucessfully booted the Lucid desktop install CD in live CD mode, mounted the filesystems, and started parts of my system in a chroot. In that system I tried running an update, and removing plymouth, but it made no difference. how I can get my system working.
I did take a backup of /etc before I upgraded, so I could get back to a karmic install, but the pain in doing so would be considerable, so I would prefer to avoid that if possible.
View 5 Replies
View Related
May 3, 2010
I made the mistake of trying to upgrade my Karmic (server) installation to Lucid earlier today, after which I've been unable to boot into my server. The server is on OVH, so I can't watch it boot, but I am able to access all of the data from the filesystems via rescue mode. I ran fsck and that came back clean. I also ran the boot info script, the results of which are below.
I know my best bet is to backup what I can and do a fresh install, but I won't be able to back everything up so trying to get this working would certainly be more convenient. I'm sure I'm leaving out useful information, so let me know and I'll post it.
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Lilo is installed in the MBR of /dev/sda
sda1:
File system: ext3
[Code]...
View 5 Replies
View Related
May 10, 2010
when booting my system, I get sometimes a blank screen. I searched around and couldn't find a proper solution. ATI Technologies Inc RV535 [Radeon X1650 Series] The only option I have is to reset the PC and hope for it to boot without the blank screen...
View 2 Replies
View Related
May 11, 2010
Was wondering how to do this. I was trying to do achieve this from looking at different guides, but I haven't had any luck.
I am on a custom PC, with dual screens; one LCD, and one CRT, from which I installed OS X 10.5.6 from a retail DVD.
I installed OS X first, because I needed to format my HDD to use GUID partition table, because you can't install from a retail DVD without using GUID. Once OS X was installed, I partitioned my hard-drive into 4 partitions from the OS X disk utility. These partitions were HFS. I then used the Ubuntu Lucid x64 Live disk to format the 3 nre HFS partitions to use ext4, for two of them, and one swap. I installed Ubuntu as normal.
I re-booted, and GRUB recognized my OS X instillation, so I tried to boot into it. It went into OS X, but with some major problems. My LCD screen was going haywire, but my CRT seemed to be working, but it took on my LCD's screen resolution and place as the main screen.
I thought my OS X instillation was badly damages, so with Ubuntu still installed on the other partitions, I re-installed OS X, which I am on now.
I want to know how to boot back into Ubuntu, while still having the option to boot into OS X.
View 9 Replies
View Related
Jun 30, 2010
upgrading my Karmic 9.10 to Lucid 10.4 I can't boot anymore to Linux only to Windows.My installation is a WUBI installation and I installed it on the only harddisk I have in the folder c:ubuntuNow when I boot I get a grub prompt and when I do LS I see hd0,msdos01 as partition.Now's I've tried to manual boot it by using the following commands from the ubuntu manual
set root=(loop0)
linux /vmlinuz root=/dev/sda1 loop=/ubuntu/disks/root.disk ro
after this command I get an error
[code]....
View 9 Replies
View Related
Jul 6, 2010
I have the 32 bit lucid dual booted with win 7, and I wanted to upgrade to the 64 bit lucid. I have the .iso on a jump drive ready to go, BIOS is set to boot from it, now it gets funny. Unless I misunderstand what grub does shouldn't my jump drive show up in the grub menu so that I can select it to boot from? My only options showing are 32 bit lucid and wins 7.
View 4 Replies
View Related
May 6, 2010
I'm trying to install Lucid server (64 bit) and I'm having trouble getting it to boot from software RAID. The hardware is an old Gateway E-4610D (1.86GHz Core2 Duo, 2GB RAM, 2 500GB HDs).
If I install on a single HD, it works fine, but if I set up RAID1 as described here, the install completes fine, but on reboot this is what I get:
Code:
mount: mounting /dev/disk/by-uuid/***uuid snipped*** on /root failed: Invalid argument
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
[Code].....
When I set up the RAID using the ubuntu installer, I created identical main and swap partitions on each of the two drives (all four are set as primary), made sure the bootable flag was on on the two main partitions, then created a RAID1 out of the two main partitions, and another RAID1 out of the two swap partitions.
View 9 Replies
View Related
May 28, 2010
I'm currently running Hardy and XP in a dual boot setup. I want to install Lucid but don't want to overwrite my working Hardy partition and am worried by the number of reported problems with Grub2. XP is currently taking up all of my first hard drive. Second hard drive is : Hardy, then swap, then separate /home. After a bit of research, does this sound like a good plan ? ...
- Use gparted from the Live CD to shrink my Windows partition (then make sure XP still boots OK )
- Create a new partition after XP on drive 1
- Install Lucid in this new partition, using Advanced option, and tell it use my existing swap and home partitions on drive 2 (with no format, of course)
- Write Grub to this new partition
- Boot Hardy, and edit grub manually ( or use StartUp Manager, will it detect Lucid and add it as an option ? )
- Reboot and get options for Hardy, XP, and Lucid.
Does that sound correct, especially the Grub bits? When I'm happy that Lucid is OK I'll probably install Grub from it to the MBR.
View 5 Replies
View Related
May 28, 2010
I did a clean upgrade to lucid 10.04 from Karmic 9.10. After the installation, the boot was stuck at the purple screen with red and white dots.I did this on Dell XPS M1530 laptop and there was no problem in Karmic.
1. I found a temporary solution. After being stuck here, I simply go to tty1, login and startx. Now, I could work normally but if I go to tty1 and then to 'Ctrl-Alt-F7', I could still see the purple boot screen whereas 'Ctrl-Alt-F8' brings me to the normal GUI. How do I get rid of this purple boot screen ?
Searching on google suggested:
2. Remove 'quiet splash' and instead use 'nomodeset'. When I did this, I got the black screen with the messages during boot but it still got stuck. Importantly, there was no login prompt at tty1 or other ttys. Some messages towards the end where boot got stuck are below. Please help as I did like a fix to this.
View 6 Replies
View Related
Aug 19, 2010
I'm trying to do a clean install of Lucid (10.04.1) 64-bit on a Lenovo X201, Ubuntu only (no dual-boot), using the alternate install disk for an encrypted LVM.
I followed the default options at all points during installation, except that I opted not to configure the network because the computer is not currently connected to a network. The install (said that it) completed correctly.
When I turn on the computer, it correctly runs the BIOS. Then I get a blank screen with a flashing cursor in the upper lefthand corner. The hard drive accesses a couple of times. After a few seconds, the screen goes off (the cursor doesn't just vanish; the screen actually goes off), and it just sits there indefinitely without booting.
I should note that I've tried this with the boot order in the BIOS set several different ways, including HD first and only, with no effect.
View 6 Replies
View Related
Oct 4, 2010
can I reinstall one os without overwriting the other?
View 2 Replies
View Related
Oct 26, 2010
I am using Ubuntu Lucid Lynx 10.04 (64 bits) in my Asus U30JC laptop (Core i3 M350, intel 4500MHD + nvidia 310M with nvidia Optimus, 4GB RAM). I am content with Lucid and I don't want to upgrade to 10.10 for now. However I read that the new 2.6.36 kernel has some good improvements, such as improving system interactivity while intensive I/O (such as copying large files), and improved energy management for i3/i5 processors (which I hope translates into more battery time, which is a problem of Ubuntu vs Win7 in my laptop).
I discovered I had 2 options: compile the kernel myself, or use the Ubuntu Kernel PPA (maintained by the Ubuntu Kernel Team). I decided to use the PPA, so I added it to my software sources and installed the generic"linux-lts-backport-natty" kernel (2.6.36-1).
Package installation went fine, and after reboot, I could log in to the desktop no problem. Everything seemed fine, but after a few minutes, the system freezes completely: mouse did not move, none of the indicators moved, even Ctrl + Alt + F1 did not work.Where is the log file where there might be a message related to the freeze? Do you think that the kernel developers would try to fix a bug that probably only affects people running the 2.6.36-1 kernel on a distribution that was not built around it?
View 1 Replies
View Related
May 7, 2010
I have been unable to get the fancy purple bootsplash (plymouth) since I installed Lucid Lynx on my ThinkPad T43. The bootsplash would up when I had booted off of a Live CD, but all future instances post-install only shows the blinking terminal cursor, followed by the GNOME log in screen. This has occurred after upgrading from Karmic, and after attempting a fresh installation of Lucid. Here's what I've tried so far without success:
comment out "GRUB_HIDDEN_TIMEOUT=0" in the grub file tried running echo FRAMEBUFFER=y > /etc/initramfs-tools/conf.d/splash update-initramfs -u under su but it did not work because my conf.d directory doesn't contain a file called "splash", but only one file called "resume". This fix was taken from [URL]..A Google search showed that a lot of users with this problem have NVIDIA cards; however I'm running ubuntu on a system with an ATI card.
View 7 Replies
View Related
May 12, 2010
I run "aptitude update;aptitude full-upgrade" today, then I updated /etc/default/grub changing only the default boot line number, and I dully run update-grub, with no error messages. Now Kubuntu will not boot. The new kernel 2.6.32-22 is in the boot menu. When I turn the computer on, a blinking cursor appears on top line, column 8, and after a few seconds this cursor disappears and the screen is blank - my monitor indicates no video signal.
The failsafe 2.6.32-22 grub line does not boot either. I tried pressing Ctrl-Alt-F1, Ctrl-Alt-F2 etc. up to Ctrl-Alt-F10 to get to a text mode login prompt, but the screen remains blank and my monitor indicates no video signal. The workaround is to boot to kernel 2.6.32-21. The machine is Athlon XP, 2GB RAM, ATI Radeon 9600
View 1 Replies
View Related
Jul 21, 2010
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
View 2 Replies
View Related
Jul 22, 2010
I run Lucid on ext3. I really miss not being able to reach Lucid from my dual boot Vista.I have installed the latest fsdriver. I have also tried this:[URL].. which does not work. (Is it because fsdriver is still in the system?) I also tried these methods but to no avail.[URL]. The problem seems to be related to fsdriver not being able to handle ext3 with Inode size = 256. Going back to ext2 for only the home partition seems complicated?
View 1 Replies
View Related
Aug 5, 2010
I recently installed Lucid Lynx inside my Windows XP using Wubi. When I restart I don't have a boot screen giving me the option to boot into either or, it just boots directly into XP. How do I fix this so I can boot into Lucid?
View 1 Replies
View Related
Aug 11, 2010
i currently have lucid installed on my laptop hard drive. i took this drive out and then on a new drive in its place i have installed windows 7. reason why i couldn't put windows 7 on the same drive is that i have a BIOS based system and the hard drive is GPT based not MBR. therefore, i couldn't get windows back on it.
I figured that using an esata expresscard interface i should be able to use the Windows 7 drive externally without much speed penalty since ExpressCard in my case is implemented on PCI Express and not USB.
So i can update grub using
Code:
update-grub
and Windows 7 appears on the list. However, when i select this option during boot, it gives me errors that indicates that the external drive cannot be found (not surprising)
My guess is that when GRUB appears, the external hard drive has not been detected yet, and the modules for the expresscard may only be loaded during the boot process of lucid.
So I am wondering if there is anyway I can get this to work. meaning use lucid on my main drive and boot to Windows 7 from the external drive time to time.
View 8 Replies
View Related
Oct 23, 2010
I'm trying to create a dual-boot system, and have been following the instructions here. However my hard disk has bad sectors, and GParted won't let me resize the Windows partition. It tells me to use ntfsresize with --bad-sectors as an option, after having done some checks, all of which I've done. I've successfully shrunk the NTFS volume in this way -
when I boot into Windows, it says the hard drive is the size I set it at. However, the Ubuntu installer and Gparted still see the Windows partition taking up the entire hard drive. So, for the installation, do I have to set the size of the volumes manually, or is there a way to make Ubuntu see what ntfsresize has done?
View 2 Replies
View Related
Feb 23, 2011
Why is it that about 98 to 99% of the time my computer will boot to Ubuntu/Lucid just fine but on rare / random occasions after seeing the initial BIOS boot screen and initial cursor just after initial BIOS boot screens, the video will just go BLANK, i.e. does not boot to Ubuntu desktop ?
If I then do ALT,CRL,DEL sequence the SPLASH screen is displayed on the monitor and the system then reboots and then goes thru the complete boot process all the way to the desktop just fine.Why this occasional failure to boot completely to the desktop ?
View 9 Replies
View Related
Sep 1, 2011
First, I know there are numerous threads on grub errors but I have tried all possible solutions and that's why I'm here. My issue is that I'm not able to boot from the grub prompt as described for installing grub from a LiveCD https://help.ubuntu.com/community/Gr...0from%20LiveCD. I can see grub is installed but is missing the kernal and other files. code...
I ran the boot_info script and the output is attached. From what I can tell it cannot even detect an OS being installed, but I've kept everything up to date and never had any issues. Everything was fine yesterday and now this. Also, I tried the Boot Repair CD and that did not work.
View 9 Replies
View Related
Apr 27, 2010
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
View 2 Replies
View Related
Feb 23, 2011
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
View 9 Replies
View Related
May 14, 2010
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
View 4 Replies
View Related
Oct 11, 2010
Ubuntu 10.04 how stable are the lucid-proposed and lucid-backports options in the software sources settings?
View 4 Replies
View Related
