Ubuntu Installation :: System Will Not Boot After Lucid Upgrade
May 2, 2010
I have an AMD64 system, which I recently upgraded to Lucid 10.04. The system now fails to boot after the upgrade. Recovery mode makes no difference.
When I attempt to boot, I get a series of messages about file systems needing checking, and also some messages from ureadahead-other. (process terminated status 4), though a post here says that status 4 is in fact not an error.
I have sucessfully booted the Lucid desktop install CD in live CD mode, mounted the filesystems, and started parts of my system in a chroot. In that system I tried running an update, and removing plymouth, but it made no difference. how I can get my system working.
I did take a backup of /etc before I upgraded, so I could get back to a karmic install, but the pain in doing so would be considerable, so I would prefer to avoid that if possible.
View 5 Replies
ADVERTISEMENT
May 13, 2010
I have a dual boot system with Win XP and Ubuntu (using grub boot menu). I recently upgraded my Ubuntu from 9.04 (Jaunty) to 10.04 (Lucid) and now I cannot boot into Ubuntu - I just get a desktop with no icons or disk activity. I think this may have something to do with the fact that I answered 'no' when asked whether to replace my menu.1st file, and possibly some others. So my boot menu still refers to 9.04.
View 9 Replies
View Related
Jun 7, 2010
cannot boot into Windows XP following uograde from karmic to lucid.
It comes up on the grub list at the start but when I select it I just get a flashing cursor.
Below is the results I get from a boot info script
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for /boot/grub.
[Code]....
View 6 Replies
View Related
May 3, 2010
I made the mistake of trying to upgrade my Karmic (server) installation to Lucid earlier today, after which I've been unable to boot into my server. The server is on OVH, so I can't watch it boot, but I am able to access all of the data from the filesystems via rescue mode. I ran fsck and that came back clean. I also ran the boot info script, the results of which are below.
I know my best bet is to backup what I can and do a fresh install, but I won't be able to back everything up so trying to get this working would certainly be more convenient. I'm sure I'm leaving out useful information, so let me know and I'll post it.
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Lilo is installed in the MBR of /dev/sda
sda1:
File system: ext3
[Code]...
View 5 Replies
View Related
Jul 6, 2010
I have the 32 bit lucid dual booted with win 7, and I wanted to upgrade to the 64 bit lucid. I have the .iso on a jump drive ready to go, BIOS is set to boot from it, now it gets funny. Unless I misunderstand what grub does shouldn't my jump drive show up in the grub menu so that I can select it to boot from? My only options showing are 32 bit lucid and wins 7.
View 4 Replies
View Related
May 28, 2010
I did a clean upgrade to lucid 10.04 from Karmic 9.10. After the installation, the boot was stuck at the purple screen with red and white dots.I did this on Dell XPS M1530 laptop and there was no problem in Karmic.
1. I found a temporary solution. After being stuck here, I simply go to tty1, login and startx. Now, I could work normally but if I go to tty1 and then to 'Ctrl-Alt-F7', I could still see the purple boot screen whereas 'Ctrl-Alt-F8' brings me to the normal GUI. How do I get rid of this purple boot screen ?
Searching on google suggested:
2. Remove 'quiet splash' and instead use 'nomodeset'. When I did this, I got the black screen with the messages during boot but it still got stuck. Importantly, there was no login prompt at tty1 or other ttys. Some messages towards the end where boot got stuck are below. Please help as I did like a fix to this.
View 6 Replies
View Related
May 12, 2010
I run "aptitude update;aptitude full-upgrade" today, then I updated /etc/default/grub changing only the default boot line number, and I dully run update-grub, with no error messages. Now Kubuntu will not boot. The new kernel 2.6.32-22 is in the boot menu. When I turn the computer on, a blinking cursor appears on top line, column 8, and after a few seconds this cursor disappears and the screen is blank - my monitor indicates no video signal.
The failsafe 2.6.32-22 grub line does not boot either. I tried pressing Ctrl-Alt-F1, Ctrl-Alt-F2 etc. up to Ctrl-Alt-F10 to get to a text mode login prompt, but the screen remains blank and my monitor indicates no video signal. The workaround is to boot to kernel 2.6.32-21. The machine is Athlon XP, 2GB RAM, ATI Radeon 9600
View 1 Replies
View Related
Apr 23, 2010
when i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.
View 2 Replies
View Related
May 7, 2010
I have been unable to get the fancy purple bootsplash (plymouth) since I installed Lucid Lynx on my ThinkPad T43. The bootsplash would up when I had booted off of a Live CD, but all future instances post-install only shows the blinking terminal cursor, followed by the GNOME log in screen. This has occurred after upgrading from Karmic, and after attempting a fresh installation of Lucid. Here's what I've tried so far without success:
comment out "GRUB_HIDDEN_TIMEOUT=0" in the grub file tried running echo FRAMEBUFFER=y > /etc/initramfs-tools/conf.d/splash update-initramfs -u under su but it did not work because my conf.d directory doesn't contain a file called "splash", but only one file called "resume". This fix was taken from [URL]..A Google search showed that a lot of users with this problem have NVIDIA cards; however I'm running ubuntu on a system with an ATI card.
View 7 Replies
View Related
Sep 20, 2010
I have an MSI U100 netbook triple booting between Win XP, Ubuntu 9.04 and OSX. Grub is used as boot loader. I want to upgrade my ubuntu install but I am a bit scared that grub will be messed up.
View 1 Replies
View Related
May 15, 2010
In the last few weeks I upgraded my Ubuntu from 8.04 to 8.10 to 9.04. No problems, everything went well. But yesterday I tried to upgrade from 9.04 to 9.10. Everything seemed to go OK until the upgrade was finished and I had to reboot. After the reboot, no Ubuntu anymore... I get GRUB, but when I continue to boot the latest kernel, I don't see any harddisk activity anymore after about 2 seconds.
Here on the forums I read that one should run the boot_info_script when having boot problems, so I already did. I booted the system with a 8.04 live USB stick. And here is the result of the boot_info_script:
[Code]...
View 8 Replies
View Related
Feb 21, 2011
Yesterday my wife was using our laptop and an upgrade manager dialogue box came up. She clicked yes to install upgrades, but at some point during this process the machine froze. She restarted, and I haven't been able to successfully boot since then. the final screen when trying to boot from the hard drive reads:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init=bootarg.
[Code]...
I'm slowly getting the hang of Ubuntu. By now I know enough that a Live CD can fix most problems. So that's where I went after doing several searches about the error messages that were appearing. The menu screen works, but I can't get it to boot into the "Try ubuntu" mode. I tried changing the boot parameters to no avail. As the boot tries to load I can see a line by line report of errors- some are I/O errors and are in white, but many were in red, which seems bad from my mostly ignorant perspective. I saw lots of SQUASHFS errors among other things. I took a snapshot of the screen that was displayed when the boot failed- it's attached to this post (lots and lots of text to be typed otherwise). The reason I know it failed is because I've tried a half dozen times with the same exact result- once I let it sit for an hour+ just to make sure it was really frozen (a bit optimistic).
Relevant info: Ubuntu is running on a Dell Inspiron 8600 laptop. I think it's version 9, but could be 10. The Live CD I'm using is version 10 burned 1/4/2011. I'd be thrilled to hear any suggestions that folks might have.
View 3 Replies
View Related
Apr 7, 2011
I have a dual boot laptop (Acer Timeline 1830) working fine. I'm running Ubuntu 10.10 and Windows 7 Home Premium Edition. I need to upgrade Windows 7 Home Premium to Windows 7 Professional (Thats Winblows for ya.). My questions: Has anybody here done this upgrade, did it go seamlessly (Didn't destroy your master boot record, etc) and is there anything anything else i should know before doing this upgrade?
View 7 Replies
View Related
Dec 9, 2009
I upgraded from F10 to F12 using preupgrade. The upgrade itself completed with no errors, but I'm unable to boot afterward.
Symptoms:...Grub starts, the initramfs loads, and the system begins to boot. After a few seconds I get error messages for buffer i/o errors on blocks 0-3 on certain dm devices (usually dm0 and dm2, but I can't get a shell to figure out what those are). An error appears from device-mapper that it couldn't read an LVM snapshot's metadata. I get the message to press "I" for interactive startup. UDEV loads and the system tries to mount all filesystems. Errors appear stating that it couldn't mount various LVM partitions. Startup fails due to the mount failure, the system reboots, and the steps repeat.
Troubleshooting done:...I have tried to run preupgrade again (the entry is still in my grub.conf file). The upgrade environment boots, but it fails to find the LVM devices and gives me a question to name my machine just like for a fresh install. I also tried booting from the full install DVD, but I get the same effect. Suspecting that the XFS drivers weren't being included, I have run dracut to create a new initramfs, making sure the XFS module was included. I have loaded the preupgrade environment and stopped at the initial GUI splash screen to get to a shell prompt. From there I can successfully assemble the raid arrays, activate the volume group, and mount all volumes -- all my data is still intact (yay!). I've run lvdisplay to check the LVM volumes, and most (all?) appear to have different UUIDs than what was in /etc/fstab before the upgrade -- not sure if preupgrade or a new LVM package somehow changed the UUIDs. I have modified my root partition's /etc/fstab to try calling the LVM volumes by name instead of UUID, but the problem persists (I also make sure to update the initramfs as well). From the device-mapper and I/O errors above, I suspect that either RAID or LVM aren't starting up properly, especially since prior OS upgrades had problems recognizing RAID/LVM combinations (it happened so regularly that I wrote a script so I could do a mkinitrd with the proper options running under SystemRescueCD with each upgrade).
I have tried booting with combinations of the rootfstype, rdinfo, rdshell, and rdinitdebug parameters, but the error happens so early in the startup process that the messages quickly scroll by and I just end up rebooting.
System details:4 1-TB drives set up in two RAID 1 pairs. FAT32 /boot partition RAIDed on the first drive pair. Two LVM partitions -- one RAIDed on the second drive pair and one on the remainder of the first drive pair. Root and other filesystems are in LVM; most (including /) are formatted in XFS.
I've made some progress in diagnosing the issue. The failure is happening because the third RAID array (md2) isn't being assembled at startup. That array contains the second physical volume in the LVM volume group, so if it doesn't start then several mount points can't be found.
The RAID array is listed in my /etc/mdadm.conf file and identified by its UUID but the Fedora 12 installer won't detect it by default. Booting the DVD in rescue mode does allow the filesystems to be detected and mounted, but the RAID device is set to be /dev/md127 instead of /dev/md2.
The arrays are on an MSI P35 motherboard (Intel ICH9R SATA chipset) but I'm using LInux software RAID. The motherboard is configured for AHCI only. This all worked correctly in Fedora 10.
View 3 Replies
View Related
Apr 28, 2011
I've just upgraded to Natty. During the upgrade no errors showed. However, when I now boot ubuntu (either recovery mode or normal), the boot process hangs at:
'checking battery state'
I searched for similair problems in this forum, but the solutions in other posts(sudo apt-get update & upgrade etc.) did not help. I'm not sure if it is related or important, but when it hangs, it also shows something like:
'starting automatic crash reporter [fail]'
'not starting jetty'
'saned disabled'
(I can't copy there of course, so it is probably not exactly like this, or in this order...) What can I do to get my ubuntu boot again?
View 9 Replies
View Related
Jun 2, 2010
I had a machine that dual-booted Windows 7 and Ubuntu 9.10. This past weekend I thought I'd upgrade to 10.04. I obviously selected the utterly wrong set of selections when prompted during installation to pick partitions for GRUB2 to manage. I am sorry I can't say what I picked, but I can tell you the results:
* Ubuntu 10.04 boots fine
* Windows 7 just blinks with a flashing cursor in the upper left
* I do have my Win 7 install disc and used the "repair" option and the command line commands, but the repair disc does NOT see any valid Windows partitions... no C:, nothing. I can't run the various repair options I've seen online because there's nothing to run it on.
* I can see the Windows partition when booted under Ubuntu... all the data is still apparently there.
* I've seen various threads about restarting with the LiveCD and re-running GRUB2 but am not sure I've seen a definitive page on how to re-run GRUB2 and what to select once I've done so.
I would be happy to get both Win 7 and Ubuntu bootable, but barring that, I would like to get Win 7 back with everything intact. If the easiest path forward is to reformat and reinstall Win 7, that's less fine but doable -- I've backed up what I can via Ubuntu to an external drive.
View 3 Replies
View Related
May 28, 2010
Last Monday I upgraded the Ubuntu from Karmic Koala to Lucid Lynx in my laptop (HP Compaq volna 515), and I have no sound. Searching in linux forums for an answers, I've got that (as far as I understand) there's no unique solution for this problem.
This is my lspci code...
Also, I tried to clean up the pulse audio .. What is funny for me is that pulse audio and alsa, and the audio players seems to work normally (no error of device not found or something like that).. except that there's no sound out from the speakers.
Any suggestion to discover if the problem is drivers, kernel, packages, or hardware failure? more important, how do I get the sound back?
View 5 Replies
View Related
Jun 30, 2011
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies
View Related
May 3, 2010
Applied the Lucid Lynx 10.04 over the weekend.
Since then - I am unable to burn DVDs, although I can successfully read DVD's.
Everything worked fine before the upgrade.
Under Lucid Lynx I am able to burn CD's (both data files and .ISO) so it isn't the hardware.
I have tried Brasero and k3b as burners - they issue messages that the burner doesn't like the medium, which is standard DVD-R.
Bear in mind that I could burn similar DVDs *before* the upgrade...
Any help or suggestions on how to fix this please?
View 9 Replies
View Related
Oct 7, 2010
I am using 10.04 how can I upgrade to 10.10 ?
View 3 Replies
View Related
Feb 14, 2011
My system won't boot unless I have 2 sata drives. It doesn't matter what's on the second one. It even boots if the second "disk" is a powered sata to IDE adapter attached to an unpowered IDE drive.If I don't have the second drive I get this when I try to boot:
Alert! /dev/disk/by-uuid/ ...<your UUID>.... does not exist,I don't see anything that seems odd to me in my /etc/fstab file.
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0[code]....
I've done the whole use a live disk, chroot into my system and reinstall the kernel to no avail. uname -r gives -- 2.6.32-28-generic
View 6 Replies
View Related
Mar 1, 2010
i tried update-manager -d from GUI and asked to downlaod 678 MB...so i downlaoded the i386 iso 685 from cdimage.ubuntu.com/alpha-3..now how to upgrade to 10.04 lucid alpha 3 from 9.10.
View 1 Replies
View Related
Apr 30, 2010
I'm currently upgrading my laptop, and it has completed the step "Getting new packages", and is now onto "Installing the upgrades".It says it is going to take another 2.5 hours, but I am leaving work soon and want to take the laptop with me. Is it safe to disconnect it from the internet at this point? I don't want to fudge up the install, but I don't want to have to leave my laptop at work all weekend (or have to come back and pick it up at some point).
View 3 Replies
View Related
May 11, 2010
I upgraded successfully last night from Hardy Heron to Lucid Lynx, but have no sound now. After searching around I can see that this is a fairly common problem. But none of the proposed solutions that work for other people have yet worked for me.
If I type 'alsamixer' at the command line, everything looks fine. There are no 'MM's indicating something being muted. I tried removing and reinstalling alsamixer and pulseaudio with no success. Edited lines 45 and 46 of /etc/pulse/default.pa with no luck.
View 9 Replies
View Related
Jun 8, 2010
Upgraded x86 Karmic (which had OpenOffice.org 3.1) to Lucid via the Alternate CD. Why was OpenOffice.org not upgraded to 3.2?
View 2 Replies
View Related
Jun 15, 2010
I can't upgrade from Karmic to Lucid,If I try to use the update manager I get a message that says "Can't download release notes. Check your Internet connection". I've tried changing the repository and I get the same message, but I can log in to the Internet, and download and install any program from the repository. I also get regular updates for Karmic so the repository is fine.I tried the command line
Code:
~$ sudo apt-get dist-upgrade
Leyendo lista de paquetes... Hecho
Creando �rbol de dependencias
[code]...
View 3 Replies
View Related
Jan 22, 2011
I wonder if others have upgraded their Lucid kernel using the deb [URL]..repository. I have been using the repository for some time now without any apparent problems, and have gone from 2.6.36-1, through 2.6.37-10, and am now on 2.6.37-12.
All of these seem to work with no problems at all, but I am just wondering if other users can also report success, or if there are any trip-ups that might occur. I still keep updating the "standard" kernel from the main repos, ie 2.6.32-27, so I have that as a backup, but I'm just very curious about other people's findings.
View 2 Replies
View Related
Mar 5, 2011
I read recently about security flaws in the ubuntu kernel, and when I checked my kernel, it is 2.6.32-29-generic. I looked in synaptic, and I have the linux-generic meta-package - which should ensure upgrade to the latest kernel, and yet this is not being updated when I run update manager. There is a linux-image-2.6.35-25-generic, but the advice is not to install this directly (to avoid breaking dependencies, etc.), but to install the meta-package instead. Yet, the meta-package doesn't seem to be doing what is should do.
View 9 Replies
View Related
Apr 13, 2011
I installed Lucid in my laptop like this:
/sda1 - ntfs windows xp
/sda2 - /boot (ext4,350M)
/sda5 - / (31528.59M)
/sda6 swap (3,2g)
/sda4 - ntfs windows data, music etc.
After I installed 10.04, I installed following programs:
-Chromium BSU (game)
-Chromium - Brownser
-Xchat
Then I followe EXACTLY this guide:
[URL]
But NO UPGRADE button appears. How Can I upgrade, without and make a fresh install? I also tried in CLI to:
z@z-laptop:/$ lsb_release -a
No LSB modules are available.
Distributor ID:Ubuntu
[code]....
View 6 Replies
View Related
Apr 30, 2010
Right after I type in my username and password and hear the usual login sound I have to wait about 15 to 20 seconds to get the X desktop. The system load average monitor is at its max and starts to become lower.If I log out and in again I dont get that delay. It only happens with logging in after a reboot/power on.I tried to open a console (Ctrl+Alt+F1) before I log in, move back to X and login then jump to console and use htop to see what's eating up my resources during that time with no luck. Everything seems to be normal.
View 3 Replies
View Related
