Ubuntu Installation :: Stuck At Boot Screen After Upgrade To Lucid
May 28, 2010
I did a clean upgrade to lucid 10.04 from Karmic 9.10. After the installation, the boot was stuck at the purple screen with red and white dots.I did this on Dell XPS M1530 laptop and there was no problem in Karmic.
1. I found a temporary solution. After being stuck here, I simply go to tty1, login and startx. Now, I could work normally but if I go to tty1 and then to 'Ctrl-Alt-F7', I could still see the purple boot screen whereas 'Ctrl-Alt-F8' brings me to the normal GUI. How do I get rid of this purple boot screen ?
Searching on google suggested:
2. Remove 'quiet splash' and instead use 'nomodeset'. When I did this, I got the black screen with the messages during boot but it still got stuck. Importantly, there was no login prompt at tty1 or other ttys. Some messages towards the end where boot got stuck are below. Please help as I did like a fix to this.
View 6 Replies
ADVERTISEMENT
Apr 30, 2010
Yesterday I upgraded from 9.10 to 10.04 via Update Manager. But when the upgrade procedure was finished and I made a reboot, I only come to the Ubuntu logo appears for a second, then the screen turns completely black and nothing happens. I then have to reboot via the power button.
But I can get it working with so far no problem, by booting to the third option in the boot options list. In the list there are several options, something like this code...
Now the question is; what does this mean when there are several alternatives with the same name? What is the difference between alternative 1 and 3, other than 3 is working and 1 is not? Is there any problem running alternative 3 instead of 1, and if so how do I get it to boot from alternative 3 as standard?
If this is not the right way to do it, how can I figure out what the error is on alternative 1?
View 9 Replies
View Related
Oct 19, 2010
System was running 9.10 just fine.
I *just* decided to upgrade to 10.04.1.
bad idea to mess w/ a working system.
Anyway my system won't go past the "ubuntu" splash screen with the five dots. The dots just keep scrolling from white to red over and over.
I can ssh into the box.
Top shows "plymouthd" is running, about 5% CPU and stuck.
View 3 Replies
View Related
May 1, 2010
i feel like i should be on the payroll if I have to work so hard and long to get these things working. (ranting stopped, for now) I have ATI Mobility Radeon HD 4330 GPU in my Dell Zino system and finished the upgrade from 9.10 to 10.04 LTS and got the purple screen of death. tried the intel recommended fixes but got nothing. I cant even get into recovery mode.
View 3 Replies
View Related
May 3, 2010
using update manager, i allowed my karmic desktop at work to begin the upgrade process to lucid on friday afternoon... i ran out of time, and headed home for the weekend. somewhere along the process, the screen locked. after arriving back at work this morning, i cannot unlock the screen, or even switch users. other threads in this forum seem to indicate that i should've aborted the upgrade, but... i didn't know enough to anticipate problems, and i guess i assumed that given the lengthy estimate to complete the upgrade, i could just pickup the process again on monday.
in any case, cycling the power didn't help, so i downloaded the iso, and have booted to the 10.04 'trial'. i was hoping somebody could help guide me through resetting a password on the on-disk os from the live cd... i'm ok with reinstalling if i can preserve my account's configs & prefs.
View 3 Replies
View Related
Jul 27, 2010
I just upgraded to Lucid Lynx, and like most people, I'm getting the black screen during boot. So, I went into the grub edit screen, and I tried every variation of the nomodeset fix I could find. So far, nothing has worked. I don't know what graphics card I have, but it's always given me problems.
View 4 Replies
View Related
May 13, 2010
I have a dual boot system with Win XP and Ubuntu (using grub boot menu). I recently upgraded my Ubuntu from 9.04 (Jaunty) to 10.04 (Lucid) and now I cannot boot into Ubuntu - I just get a desktop with no icons or disk activity. I think this may have something to do with the fact that I answered 'no' when asked whether to replace my menu.1st file, and possibly some others. So my boot menu still refers to 9.04.
View 9 Replies
View Related
Jun 7, 2010
cannot boot into Windows XP following uograde from karmic to lucid.
It comes up on the grub list at the start but when I select it I just get a flashing cursor.
Below is the results I get from a boot info script
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for /boot/grub.
[Code]....
View 6 Replies
View Related
May 2, 2010
I have an AMD64 system, which I recently upgraded to Lucid 10.04. The system now fails to boot after the upgrade. Recovery mode makes no difference.
When I attempt to boot, I get a series of messages about file systems needing checking, and also some messages from ureadahead-other. (process terminated status 4), though a post here says that status 4 is in fact not an error.
I have sucessfully booted the Lucid desktop install CD in live CD mode, mounted the filesystems, and started parts of my system in a chroot. In that system I tried running an update, and removing plymouth, but it made no difference. how I can get my system working.
I did take a backup of /etc before I upgraded, so I could get back to a karmic install, but the pain in doing so would be considerable, so I would prefer to avoid that if possible.
View 5 Replies
View Related
May 3, 2010
I made the mistake of trying to upgrade my Karmic (server) installation to Lucid earlier today, after which I've been unable to boot into my server. The server is on OVH, so I can't watch it boot, but I am able to access all of the data from the filesystems via rescue mode. I ran fsck and that came back clean. I also ran the boot info script, the results of which are below.
I know my best bet is to backup what I can and do a fresh install, but I won't be able to back everything up so trying to get this working would certainly be more convenient. I'm sure I'm leaving out useful information, so let me know and I'll post it.
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Lilo is installed in the MBR of /dev/sda
sda1:
File system: ext3
[Code]...
View 5 Replies
View Related
Jul 6, 2010
I have the 32 bit lucid dual booted with win 7, and I wanted to upgrade to the 64 bit lucid. I have the .iso on a jump drive ready to go, BIOS is set to boot from it, now it gets funny. Unless I misunderstand what grub does shouldn't my jump drive show up in the grub menu so that I can select it to boot from? My only options showing are 32 bit lucid and wins 7.
View 4 Replies
View Related
May 12, 2010
I run "aptitude update;aptitude full-upgrade" today, then I updated /etc/default/grub changing only the default boot line number, and I dully run update-grub, with no error messages. Now Kubuntu will not boot. The new kernel 2.6.32-22 is in the boot menu. When I turn the computer on, a blinking cursor appears on top line, column 8, and after a few seconds this cursor disappears and the screen is blank - my monitor indicates no video signal.
The failsafe 2.6.32-22 grub line does not boot either. I tried pressing Ctrl-Alt-F1, Ctrl-Alt-F2 etc. up to Ctrl-Alt-F10 to get to a text mode login prompt, but the screen remains blank and my monitor indicates no video signal. The workaround is to boot to kernel 2.6.32-21. The machine is Athlon XP, 2GB RAM, ATI Radeon 9600
View 1 Replies
View Related
May 10, 2010
when booting my system, I get sometimes a blank screen. I searched around and couldn't find a proper solution. ATI Technologies Inc RV535 [Radeon X1650 Series] The only option I have is to reset the PC and hope for it to boot without the blank screen...
View 2 Replies
View Related
Aug 5, 2010
I recently installed Lucid Lynx inside my Windows XP using Wubi. When I restart I don't have a boot screen giving me the option to boot into either or, it just boots directly into XP. How do I fix this so I can boot into Lucid?
View 1 Replies
View Related
May 2, 2010
I'll say up front I'm still new to Ubuntu, so if I've missed anything obvious please forgive me. I chose to upgrade my 9.10 installation to 10.04 via the update manager. Especially since I was going to be gone for long periods of time, this seemed like a good idea.
Downloading went fine, but I had to leave for a two day trip once I clicked install. When I returned, I noticed the machine was still on the purple loading screen with four dots. When I shut it down and rebooted, it got to the same screen. Pressing escape to show the text behind the screen showed two fails and one oddity:
(1) Setting sensors limits "Rather than invoking init scirpts through /etc/init.d, use the service( utility, e.g. service S49console-setup start
Since the script you are attempting to invoke has been converted to an upstart job, you may also use the start( utility, e.g. start S49console-setup start: Unkown job: S49consile-setup"
(2) Starting VirtualBox kernel modules No suitable module for running kernels found
[Code]...
View 9 Replies
View Related
Oct 13, 2010
i have upgraded my ubuntu 10.04 to 10.10 with network upgrade.but plymouth boot screen does'nt change and it's still the purple one for 10.04.
View 1 Replies
View Related
Aug 19, 2010
fedora 13.I have ran fedora for a little while now and its quite good, a lot more stable than I was led to believe and add/remove tool has a great variety. So today I was booting up and decided to "type" as fedora was booting. The long and the short of this is that fedora stops at this well the bar fills just before nvidia screen/login dialog pops up and freezes there.
View 8 Replies
View Related
Nov 20, 2010
I have just recently installed Linux Lime along with windows 7 Home Premium. Before, there would be a menu asking me which operating system I would like to use. When I click linux it goes to linux and windows 7 goes to windows 7. Now when I click Linux, the black screen you get at the beginning shows a - (dash) constantly flashing on a black screen and won't boot to linux. This is normal as it does that for a second then boots. Now its stuck on that flashing dash on a black screen and won't boot.
View 1 Replies
View Related
May 2, 2010
After I upgraded from 9.10 to 10.04, my monitor was fine. Then, after a day, when set at 1024 X 768 the screen is distorted so the sides of the desktop are very curved. What's going on?
View 1 Replies
View Related
Oct 13, 2010
I was running 10.04 Netbook remix on my toshiba Nb305 in a dual boot with Windows 7 Pro 32bit on a 1.7ghz atom processor. I have grub 2 running and prior to the 10.10 upgrade i had run all the 10.04 updates. The 10.10 update appeared to have run smoothly and seems to boot ok but all it does is load my old background picture from before and none of my launcher bars or top status bar(sorry if these aren't proper ubuntu terms but the side netbook bar for app launching and standard top bar), mouse or keyboard.
I do know things are running in the back as my dropbox has shown that it is updated files in the back (also telling me wifi works and settings transfered). The only thing i can do is hit the computer's power off button and get the standard menu options in ubuntu for that but i have no control as i hve no mouse or keyboard control. Also note windows still launches fine from grub so that is not corrupted at all.
View 1 Replies
View Related
Dec 11, 2010
Upgrade from 10.04 to 10.10 has froze on restarting SQL server. Any idea what's going on because there hasn't been any error message yet?
View 1 Replies
View Related
Sep 19, 2010
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
View 5 Replies
View Related
Jul 12, 2009
This is a standard install, just like I've done dozens of times before.
Plain vanilla, just installed.
When I boot, I get to the splash screen and it doesn't go into the default selection.
Could this be a Hardware thingy? The reason I ask is because I've had this issue happening with 5.2 on the same machine. I just formatted it completely and installed a fresh 5.3 i386 on it and I get the same behavior.
[root@server ~]# cat /boot/grub/grub.conf
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
[Code]....
View 2 Replies
View Related
Feb 5, 2010
I'm using ubuntu 9. For some weird reason, sometimes when i log in only the ubuntu logo shows up. It says "Grub loading" and then the logo appears, but the harddrive isn't accessed. After about 2 minutes, the logo disappears and the screen goes blank. I have to shut down the computer manually. The weird thing is, it only happens every so often..about every other boot up.
View 1 Replies
View Related
Feb 26, 2010
I upgraded to Ubuntu 10.04 from 9.10 and when I try to boot into ubuntu now it goes to a screen where it says "waiting for /windows" and even after the loading bar is fully loaded it stuck on that screen. BTW I don't know if this will help but when I restarted it wouldn't work because grub was broken and I booted it 9.10 live CD and reinstalled it.
View 2 Replies
View Related
Apr 28, 2010
I just bought a new Dell Studio Laptop with Intel i5 64 bit processor with Windows 7. I installed ubuntu with in my Windows 7 through CD and also tried to run it by installing it on Pen drive. But it just boots perfectly but get stuck with blank screen after that.
View 2 Replies
View Related
Dec 16, 2010
Yesterday I booted into the Ubuntu 10.10 CD, and hit the Try Ubuntu button. Ubuntu booted fine from the CD, and after trying it for a few minutes, I decided to install it.
I already had (and still have) Windows 7 installed, so, using the Ubuntu Installer, I shrinked the C (system) partition of Windows by roughly 14 GBs. 10 of which used for Ubuntu itself, and the other 4 as Swap Area.
Installation went fine, and I was asked to reboot - and so I did. However, upon restarting, I was 'welcomed' by a stuck, purple splash screen. So I used Recovery Mode, and updated my Ubuntu. That didn't change anything. I rebooted, started Ubuntu without the "splash quiet" commands, and instead used the "nomodeset" command. I logged in my Ubuntu user, and ran the StartX command. It didn't work, and I was given a few errors, including "no screen found", "Fatal server error", and something along the lines of "no NVIDIA module found (...,0)".
So what's wrong with the NVIDIA driver, really?
View 2 Replies
View Related
Mar 10, 2010
so i have been trying to install ubuntu for quite some time now and i have run into a bit of a roadblock.
I have tried to install 9.10 and it installs just fine (the GUI works just fine and everything seemingly goes ok), however when i go to boot it, i get to a flickering screen asking for my username and password (this is not the gnome login screen, it is just a blank black prompt asking for me to login). however, the flickering is inhibiting me from easily entering anything in from my keyboard. Thus, i cannot log in to fix the problem (i cannot enter my password because i dont know if the keys i am entering are being accepted or not). and recovery mode does the same thing.
This happens if i try installing it straight up, or if i install it inside windows. I have tried all kinds of boot options and install options (all that acpi crap) but none of it works.
i even tried installing some of my old copies of ubuntu (8.04), but when i do that the grub cannot load the linux kernel. I have also tried both the 64-bit and the 32-bit versions to no avail.
I am running an ASUS motherboard, AMD quad core x64, dual Nvidia geforce 8600's, 6 gigs of ram, and PLENTY of hard disk space.
I am not a noob to linux at all, but i have never encountered a problem like this and i have no clue how to fix it. Hell, i dont even know how to go about fixing it without logging in.
View 4 Replies
View Related
May 5, 2011
I just did a fresh install of Lucid on my desktop. The boot background splash screen comes up very fast, but then it is about a 1 minute wait until the login prompt appears. Then once I enter my login credentials, GNOME loads up ASAP. It wasn't this slow before I reinstalled. Anyone know why this could be? Everything works.
View 4 Replies
View Related
Dec 5, 2010
I have install linux mint 10 on my system.After all installation finish,the screen resolution is stuck at 800 x 600(4:3).No matter how I try,just could not set the screen resolution to 1024 x 768. Below is system information for your kind assistance.
-Computer-
Processor: Intel(R) Pentium(R) 4 CPU 1.80GHz
Memory : 765MB (254MB used)
Operating System: Linux Mint 10 Julia
User Name: oem (oem)
-Display-
[Code].....
View 10 Replies
View Related
