when booting my system, I get sometimes a blank screen. I searched around and couldn't find a proper solution. ATI Technologies Inc RV535 [Radeon X1650 Series] The only option I have is to reset the PC and hope for it to boot without the blank screen...
View 2 RepliesI'm on HP tx2000 Tablet PC, with nVidia GeForce 6150 Go onboard, 4GB of RAM, Ubuntu 10.04 amd64 Desktop. I keep getting a blank screen after boot splash when I'm on BATTERY POWER. Though I get a blank screen, the screen comes alive when I SUSPEND the laptop by closing the lid, and then RESUME the laptop. Then I can see the logon box and whole desktop.
Usually people get problem by suspending their laptops (usually the screen not coming back after resuming), but now I SOLVE the problem by suspending my laptop. Well like I said I can somehow get the screen right, but I really can't (and don't want to) suspend and resume my laptop every time I boot. Problem occurs REGARDLESS of type of display driver I use. nVidia proprietary, nouveau... whichever driver I use, I get the same conclusion.
I recently installed Ubuntu 10.04 on my Aspire One netbook, but everytime while booting, I am stuck at a blank screen with a blinking cursor. I've tried reinstalling but to no help. I've also tried installing 9.10, which will boot, then upgrading to 10.04 which then produces the same problem.
View 5 Replies View RelatedI'm trying to install 10.04 Server on an old Dell Poweredge 600SC I had lying around, and I'm having an issue with the installation. I can boot from the disk without any issues, I select a language for the installer, and I get to the main menu (Install Ubuntu Server, Check Disk for defects, Test Memory, etc). When I select Install Ubuntu Server, it waits a couple of seconds and then goes straight to a blank screen. No flashing cursor or anything.
I've tried some digging on the issue and another thread from a while back said to add "vga=771" to the installer line and when I did that, I got an error from my monitor itself complaining about an incompatible video mode.I know I'm not the only one who has had this issue, I just don't know how to address it. This is the first problem I've ever had on an installation.
I've downloaded 10.04 desktop (twice) and server (once). The server install will boot fine, but the desktop install goes to a blank screen (and the monitor goes to sleep) after leaving the Live CD menu (Run from CD, Install, Check Files, Boot 1st HD, etc.).My first try at downloading the desktop CD was using BitTorrent, and appeared to go OK. Burned the .iso image, booted, and when I got the blank screen I suspected the Intel D101GGC motherboard using the Radeon Xpress 200 chipset had problemsI tried adding boot options (F6) such as vga=711 and xforcevesa and text. No joyOthers seemed to have gotten a successful install so I turned may attention to the CD, suspecting it was a bad download/burn, and downloaded 10.04 desktop again from mirror.pnl.gov/releases/. The two .iso images compared equal, so I used a different CD burner, with different media and got CDs which compare identical. Both CDs fail. Then I downloaded the server CD from PNL and it ran! I could select the "test CD" function, which ran in a text mode and said the server CD was OK. I started the install, and it went OK.
View 1 Replies View RelatedLucid is not in testing but it's released.It seems it works now, with all desktop effects activated and switching users and closing sessions.The only thing I still don't know is which screensaver can I use if removing gnome-screensaver?
View 1 Replies View RelatedI am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedI have a blank screen on boot up. Has happened since 10.04.It's this problem[URL]I tired their three solutions did not work however clicking F6 and slecting nomodeset before booting got farther then ever and then saidI have tried different images, betas RCS full versions, netbook, derivatives and its all the same.hats going on? Can it be fixed and is this always going to happen now or is it just a two cycle bug?
View 3 Replies View RelatedI have a HP EliteBook 2730p. lspci reports this for my graphic card:
Code:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 30eb
Flags: bus master, fast devsel, latency 0, IRQ 30
[Code]....
I updated from Lucid to Maverick. When I boot with the new 2.6.35-22 kernel the screen stays blank after grub. When I boot the old 2.6.32-25 Kernel everything works fine. I tried to boot 2.6.35-22 in Recovery Mode. When I do this I see some kernel messages in text mode and then the screen goes blank again.
I upgraded 10.10 from 10.04 from the update button from within the update manager. It seemed to upgrade ok but after I shut down and turned it back on it goes to a blank screen. If I then hold the power button to turn it off and back on it then loads to a boot screen where about 6 options with recovery option are listed. The top 2 options do not work as they just go to a blank screen but the bottom 2 give me some other choice including seeming to boot up to a normal Ubuntu environment. How can I fix it so that it boots to a normal Ubuntu 10.10.
View 8 Replies View RelatedI have a toshiba satelite pro laptop (can't think of the exact model at the moment) with 4gb ram + 320gb hard drive. i have been dual booting ubuntu for roughly a year, and throughout all that time windows has become less and less used, therefore last night i took the plunge, and went about installing ubuntu(10.10) as my main operating system and removing windows, i did this via a usb, using Unetbootin.
I used one of the .ISO's from the official ubuntu site, and went through the installation processall went well, no errors within the installation process, hard drives were partitioned fine etc, however when i've come to turn my computer on for the first time this morning i get a black screen with a blinking underscore straight after the toshiba logo flashes up and i get the choice to go to bios options.
If i do go to bios options my hard drive is listed fine, and if i try to boot from my usb again, it doesnt work, and attempts to verify dhcp and eventually tells me it couldnt find a boot file, my laptop however is plugged in via an ethernet cable. it doesnt work with or without the ethernet cable. i have tried leaving it for about half an hour and nothing has changed, i also can't boot to GRUB.
I have got myself into a situation where I see nothing during boot until X starts, and I have no text virtual consoles. I recently replaced my old 9.10 system running on hardware that seemed to be breaking down, with a new system with both an onboard graphics chip (which I disabled in the BIOS as the 1st step), and an Nvidia GeForce 8400 GS card. I installed Windows XP then Ubuntu 9.10, copied all my files across, modified /etc/fstab, /etc/hosts, etc etc., and as the last step I unplugged the 1920x1440 IBM CRT that I'd used during the install and tweaking, and plugged the display into the BenQ LCD on a Belkin 4-port KVM. Oh, I also installed Windows and Splashtop (that mini-Linux that fast boots from the Windows NTFS partition).
I had a problem at that point: I had a lot of trouble getting any signal on the LCD monitor, and eventually got it working but with the whole display half-shifted off the screen (everything was shifted to the right about six inches), and the Ubuntu splash during boot (the sort of spotlight effect with the glowing horizontal line with the light animating along it left and right) was shrunk and only occupied part of the screen. Nor could X detect what kind of monitor it was. I had a lot of problem with a lot of attempts prodding the LCD monitor to complain "Out of range!" (over the top of the Ubuntu three linked circles). I couldn't fix the problem, and in the end installed the Nvidia proprietary driver and ran its X configurator, and suddenly everything snapped back and began working correctly: X ran happily in 1680x1050, filling the screen properly, and X could now correctly detect the monitor as a BenQ.....
I've installed 10.04 Server on a desktop three times. The install goes well and after the installation, the server reboots and I can login with no problems. I can also look around the file system and run some of the utilities. My network can also see the server. The problem comes when I restart the server for the first time after the installation restart. The system starts to come up and then the screen goes blank. The computer is still running but there is no video signal to the monitor; and the network cannot see the system. I believe this has something to do with the master boot record but I'm not sure.
View 3 Replies View RelatedI recently installed Ubuntu 10.04 and now when I attempt to boot into Windows, it just goes to a blank screen. I have some stuff on my Windows partition that I would prefer not to lose (documents, bookmarks, etc.)
I tried running
Code:
But same result. I also followed the instructions here to create a Boot Info script. Results attached.
I have installed Ubuntu 10.4 on a netbook of mine and am now unable to boot into XP - I get a blank screen.
I have ran the boot info script and attached the result.
I recently wanted to install ubuntu 11.04 on my computer (which had vista on it and I wanted to just completely wipe that out). After the install I noticed that my monitor would not receive signal during boot (I heard the little drum noise but my monitor said no signal). So I tried following these instructions (which have worked in the past): [URL]
but when I boot the computer I don't have a GRUB menu! It just automaically starts booting ubuntu 11.04. Is this because that is the only OS I have installed? Did I do something wrong? What can I do to fix the problem?
I have an system that d8.2 appears to install correctly. On first (or subsequent) boot, I get the DB8 load screen, then a quick fsck, then nothing. I appear to have some sort of environment running as I can move a mouse pointer, but nothing else.
CTRL-ALT-F2 results in the mouse pointer vanishing, but nothing else. I expected to end up at the CLI.
I have tried different installs and options, always the same result. This machine ran an earlier version with issues.
i wonder if any one can help me, i have just installed 9.10 on my Dell Optiplex P4 2.0GHz 512MB RAM 200 g hd.install went well up till i eject cd at the end,when it try to reboot all i get is a blank screen ?
View 2 Replies View RelatedI am trying to install Ubuntu Server 10.10 on a computer with 5x 1.5 TB HDDs. I went through the process of partitioning the five hard drives into three partitions each:
sd*0 is a 300MB partition for /boot, RAID1, 2 active, 3 spare
sd*1 is a 500MB partition for swap, RAID1, 2 active, 3 spare
sd*2 is a 1.5TB partition for /, RAID5+LVM, 5 active, 0 spare.
md0 is the raid1 on sd*0
md1 is the raid1 on sd*1
md2 is the raid2 on sd*2
During the install, everything seemed to work fine with the formatter, but the installation ended in error. I booted into rescue mode and found that though all the drives were U (in /proc/mdstat), it was resyncing. I let this run (overnight) and the next day, jumped back in and installed the OS successfully.
However, after installing GRUB, when the installation process asked me to reboot, the system came back up with a blank screen (blank, save for a blinking cursor) and didn't move from there. I am thinking that the problem is GRUB, since I can boot into the main LVM partition via the rescue option on the install cd. Here's what bugs me:
[Code]....
I recently installed ubuntu(32-bit 10.04) alongside windows 7 in my hp laptop(64-bit).When i installed all the updates available and restarted, a blank screen came after i chose to boot ubuntu.On pressing the power button, ubuntu closing animation appeared & it shut down.Is it because of my hardware drivers not supporting some updates.Do I have to re-install ubuntu..if yes, how do i remove it?..is deleting the ubuntu partion ok..how should i know which updates can be installed..also, are there any problems in running 32-bit version on a 64-bit laptop?
View 1 Replies View RelatedI have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
I have just installed Debian 7.8.0 powerpc on my imac G3 (400Mhz, 256Mb Ram). I had repartitioned the drive with the view of having a dual boot machine, had OS9 installed on partition 1, linux installed on partition 2 and a ext4 data partition and a 1Gb swap partition. After I installed OS9, I ran Debian Installation CD and was successfully installed. Rebooted, got through the on screen text past file system check, then screen went blank. I searched Google and forund that if I ran ctrl+alt+f1 and logged in, then ran lspci, I could get the ID of the graphics. So I did, and:
Code: Select alllspci
...
0000:00:10 Display Controller: Advanced Micro Devices [AMD] nee ATI Rage 128 RL/VR AGP
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
Boot Info Summary:
I just installed Electric Sheep (version 2.7~b12+svn20091224-1ubuntu1) on my Ubuntu Lucid box. When I test the connection in the Preferences window, everything checks out fine, but when I try to run it from the terminal I get the following error:
electricsheep: /usr/lib/i686/cmov/libavcodec.so.52: no version information available (required by electricsheep) electricsheep: /usr/lib/i686/cmov/libavformat.so.52: no version information available (required by electricsheep) electricsheep: relocation error: electricsheep: symbol av_init_packet, version LIBAVFORMAT_52 not defined in file libavformat.so.52 with link time reference Terminated. If I try to preview it using System > Preferences > Screensavers, I get a blank screen.
I installed Lucid Lynx on a medium-old system, Athlon 2200+ with an ATI video card. No problems during the install itself. The problem is that when I boot into the login screen, I get a bunch of blank boxes. If I move the mouse around, I can see various areas highlighted, but I can't actually see the menu options. I can type in my username and password to log in (not being able to see what I'm typing), but then the desktop panels are empty boxes - once again I can mouse over them to get empty drop down menus, but I can't see anything else.
I've had enough experience with Ubuntu in the past to do some troubleshooting myself. Usually I would just boot into a terminal, switch Xorg to use the vesa driver and go from there. However, a number of decisions in Lucid Lynx have made troubleshooting practically impossible.1 - No grub menu. No way for me to pick a safe boot option.2 - Install CD doesn't come with any rescue boot options.3 - Ctrl-Alt-Backspace to kill the X server and Ctrl-Alt-F1 to boot into a shell don't work.4 - the default filesystem is ext4, which means my old rescue CDs aren't likely to be of much help.Sigh. I understand that Ubuntu is trying to make things look pretty and all, but these user-friendly changes are making it near impossible to fix a problem like the one I have. I just downloaded a System Rescue Linux CD but it's kind of late to be trying it out now.
I downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
View 2 Replies View RelatedI've had Windows XP Home installed on my netbook (Toshiba NB205) and I've just tried to install squeeze via net install. In particular, I installed grub. Everything seemed to go ok during the installation, but when I boot up, all that appears is a blank screen with nothing but at "j" and a cursor. One thing I can think of that might offer a clue, is that when asked to installed grub, the installer said it recognized two operating systems: Microsoft Windows XP Home, and Windows NT/XP. The latter is not really an operating system, but the backup partition.
I don't know how this might affect grub's functioning. What does this "j" mean? Looking at this: [URL]. Could this have some thing to do with boot flag? Should I switch it to my NTFS partition instead of my root partition? Doing that at least let's me boot into Windows. But that's not what I want. I've never dual booted before. So I booted back up with my USB, intending to reinstall Debian, and it loaded grub instead. So apparently grub is now on my USB. Then it booted me into Debian.
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
View 5 Replies View RelatedI have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
I did a clean upgrade to lucid 10.04 from Karmic 9.10. After the installation, the boot was stuck at the purple screen with red and white dots.I did this on Dell XPS M1530 laptop and there was no problem in Karmic.
1. I found a temporary solution. After being stuck here, I simply go to tty1, login and startx. Now, I could work normally but if I go to tty1 and then to 'Ctrl-Alt-F7', I could still see the purple boot screen whereas 'Ctrl-Alt-F8' brings me to the normal GUI. How do I get rid of this purple boot screen ?
Searching on google suggested:
2. Remove 'quiet splash' and instead use 'nomodeset'. When I did this, I got the black screen with the messages during boot but it still got stuck. Importantly, there was no login prompt at tty1 or other ttys. Some messages towards the end where boot got stuck are below. Please help as I did like a fix to this.