I have the 32 bit lucid dual booted with win 7, and I wanted to upgrade to the 64 bit lucid. I have the .iso on a jump drive ready to go, BIOS is set to boot from it, now it gets funny. Unless I misunderstand what grub does shouldn't my jump drive show up in the grub menu so that I can select it to boot from? My only options showing are 32 bit lucid and wins 7.
View 4 RepliesWas wondering how to do this. I was trying to do achieve this from looking at different guides, but I haven't had any luck.
I am on a custom PC, with dual screens; one LCD, and one CRT, from which I installed OS X 10.5.6 from a retail DVD.
I installed OS X first, because I needed to format my HDD to use GUID partition table, because you can't install from a retail DVD without using GUID. Once OS X was installed, I partitioned my hard-drive into 4 partitions from the OS X disk utility. These partitions were HFS. I then used the Ubuntu Lucid x64 Live disk to format the 3 nre HFS partitions to use ext4, for two of them, and one swap. I installed Ubuntu as normal.
I re-booted, and GRUB recognized my OS X instillation, so I tried to boot into it. It went into OS X, but with some major problems. My LCD screen was going haywire, but my CRT seemed to be working, but it took on my LCD's screen resolution and place as the main screen.
I thought my OS X instillation was badly damages, so with Ubuntu still installed on the other partitions, I re-installed OS X, which I am on now.
I want to know how to boot back into Ubuntu, while still having the option to boot into OS X.
can I reinstall one os without overwriting the other?
View 2 Replies View RelatedI run Lucid on ext3. I really miss not being able to reach Lucid from my dual boot Vista.I have installed the latest fsdriver. I have also tried this:[URL].. which does not work. (Is it because fsdriver is still in the system?) I also tried these methods but to no avail.[URL]. The problem seems to be related to fsdriver not being able to handle ext3 with Inode size = 256. Going back to ext2 for only the home partition seems complicated?
View 1 Replies View RelatedI'm trying to create a dual-boot system, and have been following the instructions here. However my hard disk has bad sectors, and GParted won't let me resize the Windows partition. It tells me to use ntfsresize with --bad-sectors as an option, after having done some checks, all of which I've done. I've successfully shrunk the NTFS volume in this way -
when I boot into Windows, it says the hard drive is the size I set it at. However, the Ubuntu installer and Gparted still see the Windows partition taking up the entire hard drive. So, for the installation, do I have to set the size of the volumes manually, or is there a way to make Ubuntu see what ntfsresize has done?
I have a dual boot system with Win XP and Ubuntu (using grub boot menu). I recently upgraded my Ubuntu from 9.04 (Jaunty) to 10.04 (Lucid) and now I cannot boot into Ubuntu - I just get a desktop with no icons or disk activity. I think this may have something to do with the fact that I answered 'no' when asked whether to replace my menu.1st file, and possibly some others. So my boot menu still refers to 9.04.
View 9 Replies View Relatedcannot boot into Windows XP following uograde from karmic to lucid.
It comes up on the grub list at the start but when I select it I just get a flashing cursor.
Below is the results I get from a boot info script
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for /boot/grub.
[Code]....
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
I have an AMD64 system, which I recently upgraded to Lucid 10.04. The system now fails to boot after the upgrade. Recovery mode makes no difference.
When I attempt to boot, I get a series of messages about file systems needing checking, and also some messages from ureadahead-other. (process terminated status 4), though a post here says that status 4 is in fact not an error.
I have sucessfully booted the Lucid desktop install CD in live CD mode, mounted the filesystems, and started parts of my system in a chroot. In that system I tried running an update, and removing plymouth, but it made no difference. how I can get my system working.
I did take a backup of /etc before I upgraded, so I could get back to a karmic install, but the pain in doing so would be considerable, so I would prefer to avoid that if possible.
I made the mistake of trying to upgrade my Karmic (server) installation to Lucid earlier today, after which I've been unable to boot into my server. The server is on OVH, so I can't watch it boot, but I am able to access all of the data from the filesystems via rescue mode. I ran fsck and that came back clean. I also ran the boot info script, the results of which are below.
I know my best bet is to backup what I can and do a fresh install, but I won't be able to back everything up so trying to get this working would certainly be more convenient. I'm sure I'm leaving out useful information, so let me know and I'll post it.
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Lilo is installed in the MBR of /dev/sda
sda1:
File system: ext3
[Code]...
I did a clean upgrade to lucid 10.04 from Karmic 9.10. After the installation, the boot was stuck at the purple screen with red and white dots.I did this on Dell XPS M1530 laptop and there was no problem in Karmic.
1. I found a temporary solution. After being stuck here, I simply go to tty1, login and startx. Now, I could work normally but if I go to tty1 and then to 'Ctrl-Alt-F7', I could still see the purple boot screen whereas 'Ctrl-Alt-F8' brings me to the normal GUI. How do I get rid of this purple boot screen ?
Searching on google suggested:
2. Remove 'quiet splash' and instead use 'nomodeset'. When I did this, I got the black screen with the messages during boot but it still got stuck. Importantly, there was no login prompt at tty1 or other ttys. Some messages towards the end where boot got stuck are below. Please help as I did like a fix to this.
I run "aptitude update;aptitude full-upgrade" today, then I updated /etc/default/grub changing only the default boot line number, and I dully run update-grub, with no error messages. Now Kubuntu will not boot. The new kernel 2.6.32-22 is in the boot menu. When I turn the computer on, a blinking cursor appears on top line, column 8, and after a few seconds this cursor disappears and the screen is blank - my monitor indicates no video signal.
The failsafe 2.6.32-22 grub line does not boot either. I tried pressing Ctrl-Alt-F1, Ctrl-Alt-F2 etc. up to Ctrl-Alt-F10 to get to a text mode login prompt, but the screen remains blank and my monitor indicates no video signal. The workaround is to boot to kernel 2.6.32-21. The machine is Athlon XP, 2GB RAM, ATI Radeon 9600
I installed Ubuntu 10.04 as an upgrade from 9.10 on a dual-boot (2 separate disks) machine and it decimated my Win bootloader. I did fix and here's my solution:
1/ Run Win XP installation disk
2/ Type R for Repair
3/ Choose XP installation
4/ Run FIXMBR and FIXBOOT
Note when I ran FIXMBR only, it did not fix my problem. But running both FIXMBR and FIXBOOT did solve the problem. I offer for information only, as your situation may require a different solution.
Current set-up:
Athlon 64 2800
2 GB RAM
340 GB on two HDD
Ubuntu 10.04 LTS
Win XP Pro SP3
After getting the Silver Ghost all set up and purring like a kitten for my daughter, she now informs me she'd rather have Win7 HP instead of Win XP Pro SP3. Ubuntu and Win XP Pro are on separate HDD. Can I do a "clean install" of Win 7 HP on the Windows drive without screwing up GRUB? Or will I need to do the dance described at [URL]. I've had to modify Ubuntu because of conflicts between 10.04 and the Ralink 2780 (?) wireless-n drivers.
My hard drive apparently has errors, according to my Windows 7 installation. ._. So I am going to restore to factory settings. First question - Will factory setting make me lose my Anytime Upgrade? If so, is the key that was in the anytime upgrade box re-useable? Second Question - Under the chance that I have data loss once setting up my Ubuntu-Windows 7 Dual boot system, will I lose my anytime upgrade, and is it re-usable?
View 5 Replies View RelatedI reinstalled XP to do a dualboot with 10.10 yesterday. All was fine. Today I went through and installed everything windows needed, and everything seemed fine. Then I upgraded the BIOS on my motherboard, and suddenly everything isn't fine. I can boot to Ubuntu just fine. But when I select Windows from the GRUB menu, it just sits there with a cursor on the screen now.
View 1 Replies View RelatedI haven't done this in a long time, so I probably just need a quick refresher on a few things. I had to revert to Vista as my primary OS for more than a year to do CAD work, but now I finally have the freedom to move back to Ubuntu. I have my Win7 upgrade that I still haven't done (yes, I know I'm late to the party) and I want to update my Ubuntu 9.04 install to 10.10.
If I remember how to do this correctly, I should upgrade Vista to Win7 first, and then install Ubuntu second. I have two separate hard drives, so each OS will go on a separate one. The only issue I had in the past is that the drive with Ubuntu on it must be set as the primary boot device, otherwise GRUB wouldn't load. Is this all correct? I've been out of the Ubuntu loop for quite a while, are there any caveats to this process that I should be aware of?
I have a pretty good grasp on general computer works and I have read alot about the dual boot system and can do it with multiple variations of linux. My problem lies within my laptop, that I want to do a dual boot on (which is my only one with wireless). It is currently running Vista Home Premium-x86 and I would like the upgrade to Windows 7 Proffessional-x64. I have access to it but I have to keep Vista as is in order to keep Windows 7 as an upgrade which will have to be a custom install. This HD is dedicated to Vista and the backup partition as it is already.
I've read just about everywhere that you first have to do Ubuntu install and partition and then Windows, which makes sence, and then change the GRUB. However, I'm unsure about this case.
What would be the best way of going about making the partitioning scheme? I've already backed up everything possible so loosing that info is not the problem. Vista is the problem. My HD is a toshiba 320gbs- 2.5" form factor. My plan was to make 3 partitions. Windows, Ubuntu, and then the back up partion for Windows. I wanted to allocate Windows 150gb, Ubuntu 150gb, and then the other 20gb as back up for Windows.
I have a dual boot laptop (Acer Timeline 1830) working fine. I'm running Ubuntu 10.10 and Windows 7 Home Premium Edition. I need to upgrade Windows 7 Home Premium to Windows 7 Professional (Thats Winblows for ya.). My questions: Has anybody here done this upgrade, did it go seamlessly (Didn't destroy your master boot record, etc) and is there anything anything else i should know before doing this upgrade?
View 7 Replies View RelatedI had a machine that dual-booted Windows 7 and Ubuntu 9.10. This past weekend I thought I'd upgrade to 10.04. I obviously selected the utterly wrong set of selections when prompted during installation to pick partitions for GRUB2 to manage. I am sorry I can't say what I picked, but I can tell you the results:
* Ubuntu 10.04 boots fine
* Windows 7 just blinks with a flashing cursor in the upper left
* I do have my Win 7 install disc and used the "repair" option and the command line commands, but the repair disc does NOT see any valid Windows partitions... no C:, nothing. I can't run the various repair options I've seen online because there's nothing to run it on.
* I can see the Windows partition when booted under Ubuntu... all the data is still apparently there.
* I've seen various threads about restarting with the LiveCD and re-running GRUB2 but am not sure I've seen a definitive page on how to re-run GRUB2 and what to select once I've done so.
I would be happy to get both Win 7 and Ubuntu bootable, but barring that, I would like to get Win 7 back with everything intact. If the easiest path forward is to reformat and reinstall Win 7, that's less fine but doable -- I've backed up what I can via Ubuntu to an external drive.
I've been using ubuntu for a couple of years rather successfully on my dual-boot Vista/Ubuntu. It upgraded to 8.0(4?) LTS, 10.04LTS and I kept it there until this afternoon I followed the instructions on the ubuntu site to open up a terminal and update-manager --somearg to provide me with a nice little "Upgrade" button on the update manager. I clicked said button per the instructions, let it do it's downloading and whatever else it does. The last step of the installation is a system reboot. I let it do that, and then my grub menu comes up as more-or-less this:
Code:
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic (recovery mode)
Ubuntu 10.04 LTS, memtest86+
Other operating systems:
Windows Vista/Longhorn (loader)
If I select the top one, I get:
Code:
Starting up ...
with a blinking cursor under the S for a LONG time (used the power switch after ~40 mins). I tried the second 2.6.32-32 option for recovery mode. It spit a bunch of gibberish to the screen for a couple seconds and then stopped, presumably doing the same thing, just with 100% more gibberish. I tried booting into Vista, that worked fine. Just to reiterate, I've not yet seen a 10 LTS login screen or desktop, and can't get one yet (just a "Starting up ...") Just to add, I did try searching, but since the only info I had to go on was 8 LTS to 10 LTS upgrade, and "Starting up ...", well those are just hard keywords to get any meaningful info.
When Karmic came along, I upgraded and it was possible for the first time to get a dual monitor display working using only the GUI apps supplied. (I think I used screen resolution) It worked out of the box and took no time whatsoever.
I had a dual monitor set up working with 2 1024 x 768 monitors, with a desktop spanning both, and a background picture doing the same.
The Lucid update has just spectacularly broken this, along with a large number of desktop type changes that were unwanted.
The version of Ubuntu was the usual vanilla, but with enough K stuff installed to make K3b work. The card is a Radeon 9250SE.
Give up and re-install Karmic? Wait for some sort of upgrade to allow either Monitors or Multiple Screens to work - the option to remove cloning is greyed out in one and unticking clone in the other does nothing? Try some other distro?
Does anyone know of a decision to remove any functionality from Lucid that existed in Karmic? Is there any useful background to this that is perhaps not obvious?
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I deleted 2 ubuntu partitions using Vista's manager, and expanded the unallocated space in to the Vista partition. when I restarted a screen came up saying error: no such partition grub rescue> Is there any way I can fix this ( by deleting grub, or something...)
View 3 Replies View RelatedI'm using Lucid and trying to dual-boot into Vista.
All I see when I select Vista in the GRUB loader is in the .png image I have attached to this post.
Very confusing....I can get to Vista by inserting the install disk, but then it overwrites (I believe) the GRUB loader.
Also:
Is there any way to reinstall GRUB from the Lucid installation disk without installing another Lucid OS??
I would like to add Ubuntu 8.10 as a dual boot option to my Ubuntu 10.04 installation. It is not immediately obvious to me how to do so, because running the CD installation will presumably overwrite Grub2 with Grub (and might not successfully boot 10.04).
How do I install 8.10 without overwriting my Grub2, and then add 8.10 to the Grub2 menu?
I seem to have a problem connecting to the internet with Ubuntu after dual-booting my new laptop with 10.04. I have a DW1501 Wireless-N WLAN Half-Mini Card in my new laptop, and I'm not sure what to do to fix this. The other computers I have running Ubuntu are much older and had everything run correctly right after the install.
View 1 Replies View RelatedI recently installed Ubuntu Lucid on my sisters laptop and it will now no longer boot into Windows Vista.
When Vista is selected, the loading bar is briefly displayed before the screen turns black and returns to GRUB.
EDIT : More specifically, first a long bar is displayed at the bottom of the screen that says something like 'loading windows files' above it. Then the standard vista loading bar, with (c) microsoft under it. Then I get an hourglass pointer and a message "please wait a moment" in the centre of the screen. After a few seconds, the screen then goes black and the computer reboots.
I used a live CD to install Ubuntu and I chose the default automatic option for the dual boot partitioning. All the data on Windows can be accessed from Ubuntu, it just will not boot.
Here is the output of the boot info script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub.
[Code].....
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.