Ubuntu Installation :: Getting Lucid Dual Boot On Hard Drive With Errors And XP
Oct 23, 2010
I'm trying to create a dual-boot system, and have been following the instructions here. However my hard disk has bad sectors, and GParted won't let me resize the Windows partition. It tells me to use ntfsresize with --bad-sectors as an option, after having done some checks, all of which I've done. I've successfully shrunk the NTFS volume in this way -
when I boot into Windows, it says the hard drive is the size I set it at. However, the Ubuntu installer and Gparted still see the Windows partition taking up the entire hard drive. So, for the installation, do I have to set the size of the volumes manually, or is there a way to make Ubuntu see what ntfsresize has done?
View 2 Replies
ADVERTISEMENT
Jan 12, 2011
i installed Ubuntu 10.10 on our second hard drive, and i cant dual boot it. it is set as slave, so should i set it to master, or do i need to hit a key @ initial boot. ive gotten a list that shows vista on it, which is on C: , but not ubuntu, which is on F:.
View 9 Replies
View Related
Mar 17, 2010
I have a pc with windows on it, about 90% of the hard drive is full. I want to install dual
boot ubuntu with ubuntu using about 70% of the hard drive, do I need to manually create space, or can I just set during the install will ubuntu just over-write that much. I don't care about the files I have under windows.
View 1 Replies
View Related
Jul 28, 2010
I would like to have 1 hard drive operate with Ubuntu 10.04 and another with Windows 7 Pro, with a proper boot selection menu when I boot up my computer.
View 5 Replies
View Related
Sep 29, 2010
I have Windows 7 x64 on a RAID0 Setup and have a separate 120GB Hard Drive and want to DualBoot with Ubuntu! How do I go by doing that seeing that LiveCD is not detecting Windows 7 Loader?
Twitpic : [URL]
View 3 Replies
View Related
Jul 28, 2011
I was attempting dual boot my computer (ubuntu 11.04 and windows 7) and when I got to the stage to allocate drive space I accidentally formatted the largest partition of my hard drive to a linux swap. My computer froze while it was formatting the drive and I was forced to power off my laptop. Windows was my original operating system and was installed on the partition that is now formatted (or maybe not because of the crash during the formatting) as a linux swap. Therefore my windows no longer works and I cannot restore my computer for a backup because it wont let me restore it to the partition that is now a linux swap. Now when I boot from the linux install cd I get an error and am not able to install ubuntu or format/allocate drive space. Is there a way I can reformat and fix my harddrive so I can them restore windows.
View 9 Replies
View Related
Feb 23, 2010
A few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
View 6 Replies
View Related
Oct 8, 2010
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
View 6 Replies
View Related
Aug 27, 2010
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
View 14 Replies
View Related
Jul 3, 2011
I currently have a 160GB hhd running Ubuntu 11.04 and Windows XP, with the following partition configuration:
sda1 Windows NTFS (primary-active and boot and system)
sda5 Linux Swap (logical)
sda6 Linux Ubuntu ext3 (root)
sda7 Linux Ubuntu ext3 (home)
sda2 other
I have Grub2 installed, which provides me the choice at boot to start either Ubuntu or XP. This currently works fine.
I want to clone this hhd and transfer to a new, larger hhd, and have several questions, since I don't want to make a mistake with something so crtical. 1) Which software is generally considered the safest, most reliable and easiest to use (dd, Gddrescue, Clonezilla, Paragon, Macrum Reflect, Easeus, Drive Image XML, or something else)?
2) Which software will be able to copy and include both operating systems in the partitions to be cloned?
3) Will that software change the booting process or options in the cloned copy in any way? I've read where using Easeus corrupts Grub2 and thus requires re-installing Grub2!
Are there any other concerns, considerations or factors I need to consider in cloning the hhd; e.g. prior formatting an external hhd, and with what file system? I've also read where FAT32 would be the choice, but don't really know for sure.
View 3 Replies
View Related
Sep 1, 2010
I have ubuntu 10.4 installed in xp. Ubuntu tells me I have 50 gigs HD space yet the folder tells me I only have 700 mgs and I am getting a warning of not enough space on the computer. My question is. Is this due to windows claiming the space and not allowing enough to be used by ubuntu? If I delete windows and make this computer all linux will that help?
View 2 Replies
View Related
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Oct 5, 2010
I currently have Windows 7 installed on my laptop and I would like to dual boot w/ Fedora on the same hdd.I have two NTSF partitions, I shrunk my D drive 50GB for ext4 & swap.I've tried both liveusb-created & unetbootin to create a bootable USB to install Fedora.Anaconda starts up and I get through most of the install configuration, I set up GRUB & the partitions. Once I proceed to the next screen I get missing ISO image 9660 error My laptop doesn't have a DVD drive. It seems like a lot of people are getting this error, but I have found no concrete solution though.
How do I put the image on the drive? Windows can't read ext4 and I haven't been able to find a program that can.I have a USB to SATA adapter that I could hook up a DVD-ROM drive too, but I don't know if fedora will pick up on it.
View 12 Replies
View Related
Dec 24, 2010
I just got a new hard drive and need to transfer my dual boot window 7/Ubuntu 10.10 onto the new hard drive and be bootable. Is there an easy was to do this?
View 3 Replies
View Related
Jan 9, 2011
I have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies
View Related
Mar 1, 2010
partitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies
View Related
May 5, 2010
I have an HP Mini 210 and I recently performed an Upgrade from 9.10 to 10.04 and noticed that the netbook is much more noisy now (and can get very warm). I am not sure wether is the fan or the hard drive spinning. I did a "top" but no process was high consuming. I also thought that maybe compiz could be responsable for it, so I disabled all the visual effects, but still no change.
View 5 Replies
View Related
Mar 29, 2010
i'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.
the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.
View 9 Replies
View Related
May 11, 2010
Was wondering how to do this. I was trying to do achieve this from looking at different guides, but I haven't had any luck.
I am on a custom PC, with dual screens; one LCD, and one CRT, from which I installed OS X 10.5.6 from a retail DVD.
I installed OS X first, because I needed to format my HDD to use GUID partition table, because you can't install from a retail DVD without using GUID. Once OS X was installed, I partitioned my hard-drive into 4 partitions from the OS X disk utility. These partitions were HFS. I then used the Ubuntu Lucid x64 Live disk to format the 3 nre HFS partitions to use ext4, for two of them, and one swap. I installed Ubuntu as normal.
I re-booted, and GRUB recognized my OS X instillation, so I tried to boot into it. It went into OS X, but with some major problems. My LCD screen was going haywire, but my CRT seemed to be working, but it took on my LCD's screen resolution and place as the main screen.
I thought my OS X instillation was badly damages, so with Ubuntu still installed on the other partitions, I re-installed OS X, which I am on now.
I want to know how to boot back into Ubuntu, while still having the option to boot into OS X.
View 9 Replies
View Related
Jul 6, 2010
I have the 32 bit lucid dual booted with win 7, and I wanted to upgrade to the 64 bit lucid. I have the .iso on a jump drive ready to go, BIOS is set to boot from it, now it gets funny. Unless I misunderstand what grub does shouldn't my jump drive show up in the grub menu so that I can select it to boot from? My only options showing are 32 bit lucid and wins 7.
View 4 Replies
View Related
Apr 18, 2010
New to Linux and am wanting to install ubuntu 9.10 or 10.04 on a single separate 80gb drive. I have Windows installed on 2 80gb drives in Raid0 (nvidia controller) .I have installed 9.10 but Win7 will not load from the bootloader : gives me the error invalid signature. I've looked around and tried a few things to get it to load with no success.. is the Raid0 the issue?
If I try to install 10.04 it will hang and eventually errors out, I believe on the raid drive because it comes up with dev/mapper/nvidia_hhfbdccf1..
View 1 Replies
View Related
Oct 4, 2010
can I reinstall one os without overwriting the other?
View 2 Replies
View Related
Jul 22, 2010
I run Lucid on ext3. I really miss not being able to reach Lucid from my dual boot Vista.I have installed the latest fsdriver. I have also tried this:[URL].. which does not work. (Is it because fsdriver is still in the system?) I also tried these methods but to no avail.[URL]. The problem seems to be related to fsdriver not being able to handle ext3 with Inode size = 256. Going back to ext2 for only the home partition seems complicated?
View 1 Replies
View Related
Mar 20, 2010
I have a 160Gig and a 40 Gig drive.I would like to install the system on the 160 Gig, and use the 40 Gig drive as a storage for backups or whatever.It appears in the installation process that I am required to use a mount point, which would then turn the drive over to the root system, which would not allow it to be totally available to me.I just want to format it to ext3 filing system.Coffeecat, if you are out there and see this, strange things are happening to the 40 Gig drive - it says it is using 2 gig, but it is totally empty of all system files, hidden files, trash, etc. and it is being imaged in the media folder in root. I believe I have messed this install up to the point of no return and think I should go ahead and start over.
View 5 Replies
View Related
Apr 27, 2010
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
View 2 Replies
View Related
May 1, 2010
this may be a very stupid question, but. My computer has two hard drives. One has Windows XP installed on it. The other is blank.
Is it possible for me to install Ubuntu onto the second hard drive, and run a dual-boot using GRUB during startup? Or does it only work when both OSs are on the same hard drive?
View 1 Replies
View Related
May 4, 2010
I would like to install Ubuntu 10.04 on my new 1 TB hard drive. I currently have Windows XP installed on a 160 GB hard drive for things that I cannot do on Ubuntu. I would like to know if it's possible to install the other hard drive, and then dual boot Windows with it? Effectively dual booting across two hard drives. I wouldn't care if GRUB replaces the standard Windows bootloader, just as long as I can choose between the two at startup
View 9 Replies
View Related
Jun 21, 2010
I'm a n00b at dual booting and I plan on installing Ubuntu 10.04 on a separate hard drive than my Windows 7 64 bit one in a dual boot situation. I have read that you can do this by unplugging the Windows hard drive, install Ubuntu on the other one, and than plug the Windows hard drive back in and everything will be fine and dandy. Is this correct? If it is, will I have to manually set the Primary and Secondary drive (in the BIOS I think?), or will it automatically do that.
View 6 Replies
View Related
May 9, 2011
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
View 9 Replies
View Related
May 29, 2011
I've been trying to properly install grub for the past 3 days and failing every time.I recently bought a new computer and would like to dual boot Windows 7 64 and Natty. On my previous machines, ubuntu installer has automatically detected windows. It does not do so on this machine.I have three hard drives: 2 ssd's and a single 3 tb drive for storage.
I would like one ssd for windows 7 and one for natty.Currently, I am able to boot into both OS's but only by altering the boot sequence of the drives from the bios. I am hesitant to install grub to the windows drive for fear I will lose the ability to boot into windows. I did this early in the discovery process and ended up having to reinstall windows.
View 9 Replies
View Related
