Ubuntu Installation :: Wrong Drive Mounted As /boot During 10.10 Install?
Mar 19, 2011
My old server machine running Ubuntu 6 experienced hardware failure, so I built a new machine with spare parts and decided to install 10.10. I used the 2 HDDs from the old machine and decided to use existing partitions for the 10.10 installation. I specified the existing partitions on a 250 GB PATA drive for root, /boot, /home, and swap. For some reason when I booted up 10.10 for the first time, the other HDD (750 GB SATA) was mounted as /boot. I never specified the second drive to be used for anything during the installation, so I have no idea why this happened.and how can I change the mount point for /boot? I would like the highlighted partition in the attached screenshot to be /boot. I really hope nothing on the 750 GB drive was overwritten in this whole process, because it contains all of my photo and video backup.
Used to run Gentoo, years ago, getting back on the linux train. Anyways, got a new media pc and am having some troubles getting it to function. I am using ImageWriter, an OCZ Rally 4gb flash drive and have tried both HTTP and BitTorrent downloaded copies of 11.3 with the same md5sum check wrong error. What am I doing wrong? Is it because it thinks it is a CD or am I getting bad copies of the ISO? I am so out of practice I can't remember anything about installation anymore and am at a loss.
While installing OpenSUse i created a seperate drive for my personal files. Instead of mounting it to /home i mounted it to /usr/.....please tell me how to mount it back to /home user so that it has my files only
I have a system with two hard drives: an old one with XP and Ubuntu on it, and a new one on which I have done a fresh install of XP. The BIOS is set to boot off the new drive. I have now installed Ubuntu Studio 10.04(off an alternate install disc, not a live CD)onto a partition on the new drive. The installation went fine, but it appears to have written the GRUB bootloader to the old disc. The result is that when I boot up, the system boots straight into XP off the new drive, without ever seeing GRUB. I could reset the boot order in the BIOS each time I boot according to which OS I want, but that is cumbersome; also I would like to be able to remove the old drive at some point.
What is the easiest way for me to re-install GRUB to the new disc ?
I'm running into a weird problem when trying to install from the live CD I'm running. Basically, I have two hard drives: sda, a 160GB HDD which has Windows 7 on it, and is the one I would like to put kubuntu on; and sdb, which is a plain 500GB NTFS file system I keep all my personal stuff on.When I get to 'disk setup' and choose 'install side-by-side', it defaults to sdb instead of sda and I can't change it. I've created a 20GB partition on sda, which is where I want to put kubuntu, but it still defaults to sdb. I also can't figure out how to install to where I want using the advanced partitioning menu.
I have a HP Compaq 6710b notebook with W7 on it. I want to use Ubuntu for hobby activities, but as this is a company notebook, W7 should remain intact. I decided to install Ubuntu to an external drive.I set BIOS boot order to CD-USB-HDD.I attached a 2.5" 250GB WD Passport usb hard disk and installed Ubuntu to it from the CD.As a result, the clean install doesn't boot, I get a mere grub console (normal, not rescue).
Examining the situation I learned, that during Live CD session the inner hdd is hd0 and usb drive is hd1. Grub.cfg gets compiled to use /dev/sdb.When booting from usb drive, BIOS makes it to be hd0 and inner hdd becomes hd1 so grub tries to load kernel from W7 partition (and can't find it, I wonder why? )How to fix problem? Although grub.cfg is supposed not to be edited, may I change every sdb to sda in it?
I want to know if/how I can copy a verified Live CD to an external HDD and then install that HDD in another computer in order to do a full install? I have an old Toshiba laptop with a dead CD drive and the "no legacy" BIOS (should be called "no access" that cannot boot from USB. I'm wondering if I can either copy the live CD to that HDD (external) then install that drive in the laptop and use it to do a full install, or if I can do a full install to the external and install it to the laptop and have it work? IOW, is there any way to get Ubuntu to detect a new environment and reconfigure itself?
I am setting up ubuntu on a new(ish) HP desktop and it has been pretty painful. My issues up until now are in this thread: [URL] I marked that one as solved and am starting a new one as the initial issue for starting that thread was indeed solved. Here is where I am at now: [URL] I've found that I can just type exit, sometimes, once sometimes 10 times, and ubuntu will eventually boot. My main concern is that the grub menu only appears intermittently at boot. If I hit ESC to specify a boot device, it will show up after I pick, but if I just turn the PC on, it seems to be hit or miss. Also, as an aside, when I do get the grub menu, it is version 1.9.xxxxx. Should I be using 2?
Once in a grub menu, I follow the instructions here: [URL] and that lets me fully boot without getting the above 'gave up waiting...'error. The only problem is that this seems to only be temporary. When I reboot and get to a grub menu again, hit e to edit, it's back to what it was before....
I tried to install ubuntu 10.10 onto an HP laptop and could not get anything to boot apart from windows vista. When I entered the boot options and selected CD to try and load the ubuntu CD it just booted off the HDD repeatedly. I removed (foolishly perhaps) the HDD and formatted it on my other machine, then created a start-up disk for ubuntu on it. I re-installed the hard drive and loaded ubuntu with no problems, but I can't install it. What do I need to do to the HDD (partitions, flags, etc) to make it so I can boot the iso from one part of the drive and install on the other?
I have built a small spare computer and I dont have a cd/dvd rom. I would like to install ubuntu 10.04 from a flash drive. The bios is AwardBios 3.01. I cant seem to boot from flash drive. I disable everything in the boot menu at the exeption of "removable device". In this sub menu I have; "LS120", "ZIP-100" and "ATAPI MO". In the "other boot device" menu I have "SCSI BOOT DEVICE". I have also changed USB to "primary" instead of "auto". There could also be a chance that I havent prepared the files on the flash drive properly.
I'm on Windows XP and don't have enough room on my HD to install ubuntu so I decided to put it on an external USB drive - but when I did it I didn't know about the advanced bit in the install so when I tried to boot I destroyed my MBR for windows and it wouldn't boot - so I did fixmbr from the windows recovery console and now I can boot into windows but can't boot from the USB Drive
I have made several live Cd's and img for my flash drive and tried to even preview Ubuntu before install, but nothing seems to be working. it makes it to the screen that says Ubuntu with the dots and the dots "cycle" then afew seconds later, weather cd or flash drive, everything just stops and my computer freezes. Tried nomodeset and everything i could find between here and google to no avail.
cant get past that load screen. Ive been lurking on the forum for days and finally got fed up enough to post this because im fresh and have no clue what im doing when it comes to this. all i know is i want something better than windows(lol) and Ubuntu seems like its right up my alley...user, my "skills" if you will, are better than most, but Linux.its like trying to reed Greek for me.Also, computer specs...Toshiba A505-S6025 4gb Memory Nvidia GeForce 310M (from what i read i will have trouble with this) Realtek RTL8191SE wlan (also will have problems with this)
EDIT: just ran live cd with virtual box and it started the demo of Ubuntu with no problem with no options(like nomodeset) checked off... apparently i think im doing something wrong when it comes to booting the other way...
I have an external hard drive connected to my iMac. I have installed Ubuntu on unallocated space on my external, the first time I chose to put the bootloader on the external but when I booted up the computer and held the Option key it didn't recognize an OS to boot from.I am currently reinstalling Ubuntu but placing the bootloader on the internal hard drive hoping that the Mac boot menu will recognize an OS to boot from.
I have a new laptop that I can install ubuntu on without hassle using a cd. I wanted to put it on my older Toshiba laptop (2003) for my little cousin to use to get on the internet and play games. When I boot from the CD the ubuntu logo comes up runs. It ask me my language then goes to the screen where I can choose "Try Ubuntu without installing it" "Install Ubuntu Now" etc. Ive tried clicking both install and try both launch the ubuntu logo it runs for about 4 min and then hangs on a black screen. I know it isn't the cd because I can use it on any other computer and it works. This Toshiba cannot boot from a jump drive though so that choice is out.
I have an Acer netbook that I installed Remix on. Now I can't get the thing to boot from the CD drive which is connected via the USB port. Any suggestions? I set the boot order with the CD drive first and the HD last.
Before: I had 2 os's ubuntu and windows installed on my system. Recently, I decided to install ubuntu to a flash drive. All went well except grub was not installed to the flash drive, but appended the existing grub setup on my hard drive.
Now: Even if I set the default system in grub as windows, or the original ubuntu install, my system will not boot unless the usb stick is plugged in. I get message. Error: grub rescue: My ideal solution: To stop grub searching for my flashdrive before loading the boot menu, and if possible to write grub to the flash stick.
I was having a hard time installing Xubuntu on a an old Japanese FMV Biblo LOOX S73A, with no internal drive. trying both from a USB stick and from a CD ( I think the USB's were USB 1's, not sure) but it was finally rolling with the CD---the bios lists USB booting- yet things happen, power shortage and the battery was out-
I'm stuck with a broken Xubuntu intall I have 3 grub options, regular, recovery mode and mem test I've tried to reinstall forcing the computer to boot from the CD in the bios, but get "no os found" If I let it boot from the hard drive, I get to Busybox/initramfs commands that I know nothing of. I just want to do a clean reinstall of the whle thing, but cannot find out how to do so. as mentioned this bios has an option to boot from USB CD ROM DRIVE, hard disk, or floppy
I want to properly install Unbuntu on my multi boot pc. I would like to install to E partition which is currently ntfs. I have never installed Linux. What drive should the boot loader go? I can format E partition during install? Does it still need a swap file partition? If so, can that be made from E partition? How big? I'd like to have a boot menu to choose Ubuntu or a choice that takes me to the windows boot loader. Would that boot loader get wiped if I did a fresh install of 7 to the I drive? Also, what would be the proper way to upgrade Ubuntu? I see a lot of post where people are doing it wrong.
Here is my drives layout. Should install Ubuntu to my SSD J drive instead? I tried the live CD. Seems to work well. I have a Asus Max Formula MB, Phenom II 6core, ATI 4870. MB has a built in Via sound card. Not sure if that was working.
I just updated my server from Ubuntu 8.04 to 10.04 and now it cannot go past grub, at boot time, it would "give up waiting for root device", asking me to check whether I gave the right "root=..." or if I should increase the "rootdelay=..." in the command line argument and end up with the initramfs.
The machine is a Dell Poweredge 2900 with a HW RAID controller (I hope that should not matter, but just in case...). I tried to follow the instructions there to make sure grub is setup correctly, but without any luck.
Below is the output from the bootinfoscript (while running on the LiveCD). Anybody has any idea what can be the problem or what I could do to debug this ? I am running out of ideas.
I have just installed Xubuntu and suprisingly it did not ask me to create a partition within its installer like Ubuntu does. So now, I am left with 150mb of free space. I want to expand that amount. The problem is, I do not know where it has been installed on. I have a C and an E drive. Currently, the C drive is mounted and the E drive will not mount even if i press the mount button. Does anyone have a solution?
i have been working with computers since the age of 11 "22 now" and have taught myself everything i know, from computer repair & networking to Web design, music production and Graphics design, using programs like photoshop, dreamweaver, sony acid, i learned it all myself, anyways that's just a little insight!!!
OK so here is my problem, i have an OLD P4 2.8 GHZ PC with 512MB ram, last year i was able to burn i believe fedora 9 to a CD and install it on this PC before i removed the drive to use as an external drive. "Dont know where the CD went"
I just recently purchased a 40GB hard drive and am looking to reinstall Fedora 14 on this P4 PC, i want to use this PC as a HTPC just for internet, ..... and stream videos, maybe some internet games etc etc, my problem is my main PC cant burn any cd/dvds due to the Drive's being burned out from burning xbox games at 4x on a regular basis, the PC i want to install Fedora on only accepts CD's and even then it barely reads anything!!
Now that you know my situation i want to know if i can take the 686MB 32bit iso image and put it on a 2GB usb drive and boot/install it to the HD that way on my old P4 PC, i want Fedora 14 as my main desktop, no partitions or walk arounds. If this helps the mobo on that OLD pc with the P4 is a p4vmm2 v5 i believe the p4 is 2.8ghz, ram is 512mb and i was able to install a 64mb nivida card agp 4x over the stock 32mb agp card it came with!
Last year windows xp was sketchy on it, i installed i think Fedora 9 and it ran great, but at that time it was a 120GB maxtor ide, and i decided to use it as an external drive for my main pc to back up alot of goodies, in the end the drive just randomly stopped working and just a few faint clicking sounds before it died. The current hard drive i will be installing on this P4 P4VMM2 mobo is a 40GB Seagate 7200. In the end do you think i can do a HD install from a USB stick with this P4VMM2 MOBO with a 40GB Seagate 7200 HD.
I am using Gnome and Squeeze. I am wondering if I have a problem of understanding, or a problem that I found with Gnome.
My configuration is with a 3 hard disk system.
disk1 (Debian) disk2 (XP and Fedora) Disk3 (W7 and a Data partition)
When I boot and log in, all partitions for disk2 and disk3 are mounted read-write. Only by going to command line am I able to unmount the drives with the following sequence
cd /media umount * umount *
I should be able to mount and umount a drive by providing or responding to a root password. But I am not given the option to present a password. My request is blocked.
I also do not want to see the drives remounted after a boot. I tried to find out how this was managed, but I was unable to discover the module and it's parameter list that controls or does this task.
I have been working on a network problem and have found what the actual problem is. For some reason on boot the netmask for my eth0 is set to be 255.255.255.255 In the network GUI application it is set correctly to 255.255.255.0
I looked in the following files and it is set there correctly too. /etc/sysconfig/networking/devices/ifcfg-eth0 /etc/sysconfig/networking/profile/default/ifcfg-eth0 /etc/sysconfig/networking-scripts/ifcfg-eth0
If I check the box to "controlled by network-manager" the eth0 interface is started at boot but with a netmask of 255.255.255.255. If I uncheck this box then the interface does not come up at boot and I have to go to the GIU application to start it. It still comes up with the netmask of 255.255.255.255
I have to use ifconfig to set it to the right netmask and then everything works until I reboot. "ifconfig eth0 192.168.1.65 netmask 255.255.255.0" How do I get this to work properly? I need it to come up with the correct netmask.
I installed Fedora 12 and performed the normal updates. Now I can't reboot and get the following console error message.
ERROR: via: wrong # of devices in RAID set "via_cbcff jdief" [1/2] on /dev/sda ERROR: removing inconsistent RAID set "via_cbcff jdief" ERROR: no RAID set found No root device found Boot has failed, sleeping forever.
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
Well this is the first time I've ever really installed Ubuntu... lol. I have Jolicloud on my netbook and decided to buy a Mac mini to replace my HP Pavilion notebook. Here's the problem.
I downloaded the .iso, made a bootable USB, and my notebook is stuck at the orange/white dots thing ._.
