Ubuntu Installation :: Boot Loader Get Wiped If Did A Fresh Install Of Window 7 To The Drive?
May 23, 2010
I want to properly install Unbuntu on my multi boot pc. I would like to install to E partition which is currently ntfs. I have never installed Linux. What drive should the boot loader go? I can format E partition during install? Does it still need a swap file partition? If so, can that be made from E partition? How big? I'd like to have a boot menu to choose Ubuntu or a choice that takes me to the windows boot loader. Would that boot loader get wiped if I did a fresh install of 7 to the I drive? Also, what would be the proper way to upgrade Ubuntu? I see a lot of post where people are doing it wrong.
Here is my drives layout. Should install Ubuntu to my SSD J drive instead? I tried the live CD. Seems to work well. I have a Asus Max Formula MB, Phenom II 6core, ATI 4870. MB has a built in Via sound card. Not sure if that was working.
A bad install of linux gave me a grub that won't go away. My only hope of restoring my Windows XP and retrieving the data that was backed up (most wasn't) is to somehow access the recovery partition. That's still there. The primary partition was wiped out. This is a remanufactured system: I -don't- have a Windows CD. I -don't- have fdisk. I -don't- have any of the utility disks I'd normally use (they're 300 miles away, buried in snow and ice right now).
I do have a disk and a thumb drive with the Windows boot files on it, but grub doesn't recognize these. If I could just get rid of that grub file, I think I could boot from either the thumb drive or the cd, or even the partition with the recovery files on it, but I can't get rid of grub. I think even if I could get fdisk on either a cd or thumb drive, grub would override it. Any one know how to kill that file WITHOUT fdisk and WITHOUT the Windows CD? I have live Linux disks, Ubuntu 8.10 and 10.10 have been the most promising, but still can't do this.
I accidentally wiped my mounted c drive with rm /media/MY_C_DRIVE/ -r (The actual path is /media/51FAEE1F4B26FD12/ - that's why I wasn't aware of it). After 3 seconds I realized that I just did something terribly wrong. I hit Ctrl+C to stop but it was too late. The important system files were gone and I couldn't boot into windows. So far, I have tried to recover the files with photorec. I could recover about 68,000 files from that c drive but the names are f000001.exe, f000002.txt, f000003.jpg,. I don't know what these files are and where to put them back. Is there any way to recover these system files?
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
So I was installing 10.10 to be my only operating system on my 3 year old custom built computer and all of a sudden it stopped working at the point of "whenever you are ready" but not letting me go forward because it still was loading. I waited a long time and it was frozen so I restarted my computer and now I don't have anything on it. No operating system at all. Except the symbol " _ " blinking rapidly. Nothing is working and I just want to run 10 on my desktop
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
i am multi booting with another operating system that doesn't boot on a pc and requires a special bootloader to make it work, but before i can install that bootloader which will overwrite grub on the mbr. how do i install grub on the hard drive so that the special bootloader will exist and will recognize grub and boot Ubuntu from the hard drive instead of the mbr can this be done with the ubuntu live cd. remember i am installing grub on the hard drive, not the mbr and it's grub2
I had to un-install Ubuntu as there were too many things that didn't work. Bummer, I wanted to like it and use it.Anyway it has left me with a screen at boot-up that I must choose between Windows and Ubuntu, that counts down automatically about30 seconds and then finally boots into Windows as the default. How can I get rid of this screen and go back to booting up into Windows normally?
I have been installing 10.4 on machines with much success from USB. This is really the first Linux distro I have been excited about. I'm having problems on one machine though. It is a Dell Precision T5400 with a RAID 0 on Dell 6/iR Adapter controller. I booted to USB no problem, just like I did on my netbook, and laptop and did a pretty standard install. I'm dual booting to XP on this workstation. After the installer completed, I didn't see a grub menu. It's like nothing happened. Of course in Windows I see less drive space now since I had allocated that for Ubuntu in the Ubuntu setup. To clarify, I am not using Wubi.
I'm trying to install Ubuntu 10.04 (32-bit) on my external harddrive, and the boot loader also on my ext.HDDThe problem is, is that the boot loader won't install himself on my HDD. Is it possible to install the boat loader still on my external HDD?
I would like to completely erase my hard drive and install Ubuntu 10.04 on again fresh. I think some files have become corrupted from a power cut that I had last night whilst the laptop was plugged in (and turned on).
I'm not bothered about completely wiping the hard drive since there are no important files on it (at most there are just a lot of packages I downloaded from the repro...) I don't have any Windows installations either - it's just a simple; wipe the hard drive and reinstall all over again case
I have PC with following specs: Intel E7500 CPU / Intel G31 Motherboard Kingston 800MHz 2GB RAM Hitachi 500 GB SATA HDD + Seagate 160 GB SATA HDD
I initially had only 500 GB HDD. I installed two installations of Windows 7 Ultimate - one 32-bit and one 64-bit installations. Both working fine.
Later on I installed the 160 GB HDD and installed Fedora 13 in it in a partition. The rest space of the 160GB I am using with Windows for storing data.
Now, the boot entries of both Windows installations are in the Grub Loader of F13. Means, if I remove the 160GB HDD, I cannot boot into my Windows installations.
Now I want to remove the 160 GB HDD and install a new 2TB hard-drive. That way, I cannot log into my Windows. And I do not want to lose the Linux installation also.
How can I remove the 160 GB HDD and install a new one without sacrificing my Windows installations?
OR...Is it possible that I can copy complete image of F13 on to the new HDD, so that things are same for the Windows installations?
Here is the message I get every time I try to install Debian Squeeze on my computer: Image at: [URL] I have tried multiple cd's and multiple iso's (and the iso's where all different) and the installation always fails at the same place. Here are my specs: Hardware Overview:
Model Name:Power Mac G5 Model Identifier:PowerMac7,3 Processor Name:PowerPC G5 (3.0) Processor Speed:2 GHz Number Of CPUs:2 L2 Cache (per CPU):512 KB Memory:1.5 GB Bus Speed:1 GHz Boot ROM Version:5.2.4f1
I'm having a problem installing Ubuntu Studio 9.10-alternate-amd64 onto my machine. This is the third attempt and I keep running into the same problem. Grub Boot Loader will only install to 16% when a screen pops up:
Ubuntu Installer Main Menu
Choose the next step in the install process:
choose language configure the keyboard detect and mount CD-rom etc...
choosing the option "Install Grub boot loader on a hard disk" sends me back to the Grub install and once again at 16% the Ubuntu Installer Main Menu pops up. Choosing the option "Install the Lilo Boot Loader on a hard disk" resolves in an Lilo-install failure and i'm directed back to the Installer Main Menu. The option "Finish the installation" sends me back to the same menu..I'm stumped as to what to do... a disk check ensured me that the instal-dvd is valid though I can't get past this silly install menu.
I need to re-install ubuntu but I also have windows on the same computer(GRUB). Can I just boot from cd? Is there and option in the live cd for reinstalls or do I have to destroy the partition?
Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.
Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.
Longer version: I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.
I am a brand new Ubuntu user that just tried to install on an old PC using the 10.10 desktop edition.During installation, I hit an error that the bootloader could not install, and after reading about it on the forums, opted to attempt to install it manually after. I have followed the tutorial located here,[URL].. on reinstalling GRUB2 from the liveCD, which I assume means to boot with the installation CD and select try Ubuntu (given the only other option is install, which I have tried twice) everything up to step 5 in that tutorial seems to run successfully, and I am given a message it is installed, but then when I reboot the system it does not open the GRUB2 menu, rather the CLI interface, which suggests there is no grub.cfg
So I am unable to refresh at the GRUB menu because that command is not recognized by the CLI (and it may not help if I am missing files, so I might have screwed up reinstalling them in step 5, or maybe the "Try Ubuntu" terminal doesn't alter the computer like I thought?)
I admit that I am a noob - knows a little which makes it more dangerous than not knowing at all. in brief, I am unable to boot one of the OS out of 3 I have installed. Everything is fresh install on newly formatted partitions.
Here are the details:Two HDs - one is Sata and second is IDE. Win7 installed on IDE (sdb2) then Ubuntu 9.10 on Sata (sda2) and lastly Linux Mint on Sata (sda3). Everyone was on its place - that is - Ubuntu 9.10 on sda2, Linux-Mint on sda3 and Win7 on sdb2.
Future of the day was bright and promising until I upgraded online to 10.04. After that, I was only able to boot to Win7 (IDE drive - sdb2 - not sure if it changed at that point or not) but no nix OS on Sata sda2 & sda3. I downloaded 10.04 and installed from CD again on sda2. Well, now I am able to boot into Win7 and Ubuntu 10.04 but no Linux-Mint. Another interesting thing is that sda and sdb have interchanged/swapped. So now if I chcek it thru gparted or run boot script, Sata drive shows up as sdb and IDE is now sda. In another post, I read that grub2 does that and make IDE drive as the first drive and Sata drive as second. Well, I buy that but why I am unable to boot to second OS on the same Sata drive? Evidently, I am missing something and I take that it is mostly user error but please
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
After buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized. I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
I have some proprietory softwares installed on WinXP so it is very important for my work that it is up and running.
I performed a FULL INSTALL from the Live-CD (10.10) and installed grub on the windows partition. Now whenever I try to select the Windows option in the Grub menu, the screen goes blank and it gets me back to the Grub menu.
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
I was able to boot up the live CD and install the OS to the hard disk. *Single boot.After I rebooted, the system loads up to the Ubuntu splash screen and will "eventually" move along. The problem is that once it moves past the splash screen, it starts blacking out the screen. It looks like the screen turns on for about 10 seconds and then off for another 10 seconds repeatedly. The screen blinks like this indefinitely.This is my first attempt at installing and or using Linux so I am an uber n00b.
** Also, I am able to ctrl + alt + f1 and get to the terminal so i should be able to run any commands without any trouble.
I boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
I'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?
I had ubu 904 and vista installed on an 80gb drive, i had a spare 80gb drive also. I setup a raid0 config in my bios, then installed ubu9.10 onto it. All was fine until the very end, and then it said grub failed to install.
So i rebooted, and im left with a blinking cursor. How do i install grub? Ive installed ubu a few times now and never had an issue so now im lost.
Followed steps 2-5 and purged/reinstalled grub now it boots as it should, NO idea where it was messed up.[URL].. I had 9.10 running in raid1 and upgraded my hardware (cpu, mb, memory etc) and wanted to do a fresh install of 10.04 to get updated. After following the various guides online such as [URL]...It begins to load grub and drops to a "grub> " shell. Which I have to do the following to get it to boot.
Code: set root=(md1) linux /vmlinuz root=/dev/md1 ro initrd /initrd.img boot
Then it boots up normally and I can use it like any other desktop. I've been over my grub.cfg and /etc/defaut/grub files and cannot find the issue. At this point I'm wondering if the fact it's a raid1 setup is keeping grub from finding it's files.
Fc11 installed well, it was related to a particular sata driver perhaps The installation went well up to the reboot, and then displayed the message saying that LogVol00 was not found. 3ware sata raid card, usually it installs without error
