Well this is the first time I've ever really installed Ubuntu... lol. I have Jolicloud on my netbook and decided to buy a Mac mini to replace my HP Pavilion notebook. Here's the problem.
I downloaded the .iso, made a bootable USB, and my notebook is stuck at the orange/white dots thing ._.
Now... what's wrong?
I have created the installation-usb by the command #dd if=opensuse-11.3-Gnome-LiveCD1.iso of=/dev/sdb bs=4M;sync from my laptop with debian-lenny OS and was trying to install opensuse on my netbook (NO optical drive) with Intel Atom. The BIOS of the netbook showed the booting priority
USB Memory
USB CD/DVD ROM Driver
Hard Disk Drive
Others.
After switching on the Netbook with the pendrive in the USB port the computer simply stopped proceeding further with the pendrive blinking on and on. So what shall I do?
I just received a band new DELL laptop with a blank disk and installed Kubuntu Lucid Alternate 64 on it. No problem during install (the only option I specified was for an encrypted LVM), but when I try to boot all I can see are colored lines scrolling/blinking on the screen. If I press any key it changes to white text (unreadable) scrolling/blinking.
If I press a key during the boot and get into grub, I cannot edit the boot options, cannot go to command line, cannot use MemTest86 (maybe because the partition is encrypted). Booting with the recovery mode shows the same lines. Edit: if I try to boot with the standard LiveCD, I get the same mess, so it's abviously a video card problem. Damn, I had checked beforehand that Ubuntu could run smoothly on it.
My old server machine running Ubuntu 6 experienced hardware failure, so I built a new machine with spare parts and decided to install 10.10. I used the 2 HDDs from the old machine and decided to use existing partitions for the 10.10 installation. I specified the existing partitions on a 250 GB PATA drive for root, /boot, /home, and swap. For some reason when I booted up 10.10 for the first time, the other HDD (750 GB SATA) was mounted as /boot. I never specified the second drive to be used for anything during the installation, so I have no idea why this happened.and how can I change the mount point for /boot? I would like the highlighted partition in the attached screenshot to be /boot. I really hope nothing on the 750 GB drive was overwritten in this whole process, because it contains all of my photo and video backup.
View 1 Replies View Relatedon an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
View 3 Replies View RelatedI have just fresh installed Fedora 15 over my (very) old copy of Fedora 11. I wanted to play around with Linux.
Anyway, when I log in, I get the "Oh no! Something has gone wrong" (like I stated).
Used to run Gentoo, years ago, getting back on the linux train. Anyways, got a new media pc and am having some troubles getting it to function. I am using ImageWriter, an OCZ Rally 4gb flash drive and have tried both HTTP and BitTorrent downloaded copies of 11.3 with the same md5sum check wrong error. What am I doing wrong? Is it because it thinks it is a CD or am I getting bad copies of the ISO? I am so out of practice I can't remember anything about installation anymore and am at a loss.
View 5 Replies View RelatedAfter a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?
I installed Ubuntu 10.04 (32 bit version) a few months ago on a system with two IDE drives (cable select configuration). The primary drive (/dev/sda) is 40GB and the secondary drive (/dev/sdb) is 80GB. I created all of my partitions on the primary drive and left the secondary drive unconfigured. After a month or so I noticed that two of my partitions had quickly reached 50% capacity, as I had just taken a guess at an appropriate partition size when I first installed Ubuntu.
Since I had a larger unused drive already in place, I decided to migrate my installation from the smaller drive to the larger drive, but sizing the partitions in question more appropriately (i.e., much larger). I assumed that I could install Ubuntu on the bigger drive with larger partitions, byte-for-byte copy all my existing partitions from the old disk to the new one, edit /etc/fstab, reboot, and GBTW. Naturally that didn't work as I expected.
Here's what I did: Carefully logged my existing partitions on /dev/sda and their mount points Used a live CD to install the same version of Ubuntu on the larger drive (/dev/sdb), using its partition tool to generously size my partitions. I carefully logged the new partitions and their mount points. For each partition on /dev/sda (except for /boot and swap), I used dd to create a gzip'd image and stored all of those images on a backup drive.
I then used dd to complete the task of migrating all of these partitions (again, all but /boot and swap) to their respective partitions on /dev/sdb.
Ran blkid to see all of my partitions. I noticed that some of the UUIDs existed on both drives. I thought "hmmm...that's weird" and moved on.
Mounted my new root partition (/dev/sdb6) on a contrived mount point.
Edited /etc/fstab (after backing it up) and carefully replaced all the old UUIDs with their respective counterparts on my new drive. Also replaced the device reference for /boot with its respective counterpart.
Crossed fingers. Rebooted. Got some warnings about missing UUIDs.
After the system completely booted, I used the graphical disk utility and saw that the system mounted some partitions from /dev/sda and others from /dev/sdb. Not good.
Here are the steps I took since lurking here:
It seems my installation still has an identity crisis. What steps should I take from here to force my Ubuntu installation to only use my partitions on /dev/sdb?
Was there an easier way for me to migrate my installation to a new drive?
Trying to install draftsight on my 64 bit 10.10 system to give it a try. I do solid modeling work for a living (Inventor/Solidworks) and have to use Autocad. Ran across this program a month or so ago and really like it. Much less bloated that AC but does a nice job in the 2d world for a basic program. The package installer gives me a wrong architecture message (see attached). I think I had to change that to get adobe AIR installed and wonder if its possible to do the same here.
View 9 Replies View RelatedI downloaded the minimal boot image and installation CDs for F12 i386. On booting either I get the following messages:
Code:
This kernel requires the following features not present on the CPU:
cmov
Unable to boot - please use a kernel appropriate for your CPU
Looks to me like the installation media for i386 doesn't have an i386 kernel! I'm trying to install to an i586 CPU.
The crash happened when I was reading a web page and the screen went black and the mouse pinterr dropped to the middle of the bottom of the screen and froze. I had to do a warm reboot to get going again. I'm using 11.4 with KDE.This is the section of the /var/log/messages from around the time of the crash at 16.42/16.44.
View 9 Replies View RelatedI've been using conky for some time now, and I haven't changed conkyrc for a while. However, when I installed lucid (fresh install) conky starts wrong with ubuntu, like in a glass box that overlaps any window. The weird thing is that if I kill conky and start it over again manually (without the script in preferences->startup applications) it is OK. Screenshots: [URL].
Code:
# Rendimiento
update_interval 1.0
total_run_times 0
double_buffer yes
background yes
use_xft yes
xftfont HandelGotD:size=9
xftalpha 0.5 .....
I cannot for the life of me get my HD working again. I tried following all the various remedies I could find but to no avail.
Code:
ubuntu@ubuntu:~$ sudo e2fsck -f /dev/sda1
e2fsck 1.41.4 (27-Jan-2009)
e2fsck: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda1
Could this be a zero-length partition?
Code:
ubuntu@ubuntu:~$ sudo dumpe2fs -f /dev/sda1 | grep -i superblock
dumpe2fs 1.41.4 (27-Jan-2009)
dumpe2fs: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda1
Couldn't find valid filesystem superblock.
It goes on and one like this. I'm stuck using the LiveCD for now (Jaunty) so I have some limitations.
I have two HDs and recently reinstalled Ubuntu.
However, I think grub may have installed to my media drive and not my main HD.
Here is the output of fdisk -l:
Code:
dev/sda1 is my media drive and I think during setup grub-install may have been automatically run on /dev/sda1. If this is the case,
1) How can I remove grub from sda1 and install it on sdb?
2) Should it be on sdb1 or sdb2?
3) Can I change the naming so my main drive is sda and my media drive is sdb?
I'm new to fedora. I am using a core i3 desktop computer. I installed fedora 14 into my desktop and I Downloaded a wine 1.3.14.tar but I cannot install it. I tried tools/wineinstall in the terminal bu it say "Your directory is wrong".
View 14 Replies View RelatedThe /etc/profile said that i should do that in /etc/profile.local.I create /etc/profile.local, set the aliases, then i reboot.Now i've got a broken bash enviroment. Prompt has gone, ls colors gone, useful aliases (md=mkdir) gone.I've got this prompt: 'bash-4.0$' instead of the 'username@hostname:actual dir'.The root account has got the same errors, so i think i broke something system-wide.I removed the profile.local but the problem stays.What should i do to regain the standard bash enviroment?
View 4 Replies View RelatedWhat the right place to report errors in package descriptions ? There are more than two dozens categories mentioned on the openSUSE "reporting a bug" web page but none of them seem to fit. The packager of the concerned rpm is bugs.opensuse.org, no email printed out when launching rpm -qpi <package name>.
View 2 Replies View RelatedI'm just using a plop boot cd...it does what I need, boot from hdc 2. or (hd2,1) I'm having an issue, because Im not sure how to change the mbr so when I boot the computer from the third hdd, it just works...where is the MBR, and how do I edit it, or better, is there a GUI interface I can use?
View 9 Replies View RelatedI wrote a few minutes ago open Suse 11.04 instead 11.4, I got confused with Ubuntu's last version.
View 2 Replies View RelatedI have a system with two hard drives: an old one with XP and Ubuntu on it, and a new one on which I have done a fresh install of XP. The BIOS is set to boot off the new drive. I have now installed Ubuntu Studio 10.04(off an alternate install disc, not a live CD)onto a partition on the new drive. The installation went fine, but it appears to have written the GRUB bootloader to the old disc. The result is that when I boot up, the system boots straight into XP off the new drive, without ever seeing GRUB. I could reset the boot order in the BIOS each time I boot according to which OS I want, but that is cumbersome; also I would like to be able to remove the old drive at some point.
What is the easiest way for me to re-install GRUB to the new disc ?
osdlyrics_0.3.20100604-1~lucid1_i386.deb Ubuntu x86 32 bit deb package for Ubuntu 10.04 or later wont install. I'm running ubuntu 10.4 64bit. My question is why you can't install 32bit programs on a 64bit system? If you can then how do I do it? 64bit should run 32bit due to the resin that a 16bit system ran 8bit games/programs. I know in window 7 you can install 32bit programs on 64bit system.
View 2 Replies View RelatedMy ATI card which has 512 MB only shows up as being 256 in Ubuntu-- what's up with this -- and -- how do you now tweak your xorg setting in ubuntu 10.10
View 2 Replies View RelatedI have installed ubuntu many times before and never encountered this problem. The installer shows partition sizes which do not match my current sizes at all. This occurs during LiveCD too, I have taken a screenshot of the problem. GParted seems to be showing incorrect partitions while the one the right is correct.
View 9 Replies View RelatedA couple weeks ago I became fed up with using Backtrack5 as a primary OS, as fun as it is, and installed Kubuntu 64-bit for AMD on a laptop with an intel chip. I didn't see an intel iso on Kubuntu's site right away, and I suppose I was too excited to try it to care. I have been having some problems with plugins working correctly, but i'm not even sure this architectural mixup is to blame for that.
To cut to the chase, should I be worried about installing kubuntu that was intended for AMD on a board with an intel chip? I figure i havent really done anything I can't easily redo yet, and if I want to reinstall, i'd like to do it before I cross that bridge!
I installed opensuse 11.2 on ASUS R2E nicely It have a 7" touchscreen and works nice. The screen is correctly settled to 800x480 on boot however after a S2RAM it is reinitialized as 800x600. I made an xorg.conf with only one fixed mode on 800x480 but daesn't seems to be considered on resume. After cold boot sax2 get the right size (800x480) and after resume 800x600 The video chipset is intel 945 GM.
May this be related to hardware reinitialization ? How to re-initialize X on resume ?
I just happened to lock myself out of ssh access on my xen virtual server since I changed the ssh port but forgot to open it in the firewall. No problem, I just access it through VNC in VM manager, I thought, however I have some special chars in my root password and the keymap through VNC seems to have changed somehow. So I cant login as root, nor do su or sudo. I can login as user. I need the sign " but can't figure out how.
View 1 Replies View RelatedJust completed a fresh netinstall of OpenSUSE. This machine previously had a Ubuntu install on it, but I was having all sorts of issues and decided I required a fresh start. The install itself went acceptably, although I ended up manually fixing GRUB.Now the system is running, I've got a ridiculous problem, in that I'm still seeing the old hostname- It used to be ubuntu-server, but should now be unimatrix-001.Checked both the obvious places (/etc/HOSTNAME & YaST), but the correct hostname is in both of them.
View 5 Replies View RelatedSome days ago I decided to reinstall windows, of course windows wiped Grub of the MBR. No problem. I booted of the live CD (9.10) and tried to reinstall grub, I had Ubuntu 9.10 installed before windows wiped grub. I tried the following tutorial: [URL] My fdisk -l output is the following: root@ubuntu:~# fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000f2962
[Code]....
sda3 is my root partition, sda2 is the partition where all my media files are located. I mounted /dev/sda3 to /media/root and then I tried to reinstall grub with: sudo grub-install --root-directory=/media/root /dev/sda It came out with no errors, and then I restarted my computer. Grub started, but with a command line. It was the 1,97 beta-4 version. Since I'm quite unfamiliar with GRUB (or really technical linux stuff)
my friend was installing ubuntu when he while editing the table from the installation menu, chose to shrink the partition and use it as swap, he didn't realize he was using the actual partition not the 1 to be created as swap.so he ended up with 160 GB swap and 15 GB NTFS partitions.will deleting the partitions and recreating the NTFS partition again restore his data?
View 2 Replies View Related