Ubuntu Installation :: GRUB Installed To Wrong Drive?

Jul 6, 2010

I have a system with two hard drives: an old one with XP and Ubuntu on it, and a new one on which I have done a fresh install of XP. The BIOS is set to boot off the new drive. I have now installed Ubuntu Studio 10.04(off an alternate install disc, not a live CD)onto a partition on the new drive. The installation went fine, but it appears to have written the GRUB bootloader to the old disc. The result is that when I boot up, the system boots straight into XP off the new drive, without ever seeing GRUB. I could reset the boot order in the BIOS each time I boot according to which OS I want, but that is cumbersome; also I would like to be able to remove the old drive at some point.

What is the easiest way for me to re-install GRUB to the new disc ?

View 3 Replies


ADVERTISEMENT

Ubuntu Installation :: Grub Installed On Wrong HD ?

Aug 27, 2010

I have two HDs and recently reinstalled Ubuntu.

However, I think grub may have installed to my media drive and not my main HD.

Here is the output of fdisk -l:

Code:

dev/sda1 is my media drive and I think during setup grub-install may have been automatically run on /dev/sda1. If this is the case,

1) How can I remove grub from sda1 and install it on sdb?
2) Should it be on sdb1 or sdb2?
3) Can I change the naming so my main drive is sda and my media drive is sdb?

View 1 Replies View Related

Ubuntu Installation :: Grub.cfg Gets Wrong When Installing On Usb Hard Drive?

Jun 6, 2011

I have a HP Compaq 6710b notebook with W7 on it. I want to use Ubuntu for hobby activities, but as this is a company notebook, W7 should remain intact. I decided to install Ubuntu to an external drive.I set BIOS boot order to CD-USB-HDD.I attached a 2.5" 250GB WD Passport usb hard disk and installed Ubuntu to it from the CD.As a result, the clean install doesn't boot, I get a mere grub console (normal, not rescue).

Examining the situation I learned, that during Live CD session the inner hdd is hd0 and usb drive is hd1. Grub.cfg gets compiled to use /dev/sdb.When booting from usb drive, BIOS makes it to be hd0 and inner hdd becomes hd1 so grub tries to load kernel from W7 partition (and can't find it, I wonder why? )How to fix problem? Although grub.cfg is supposed not to be edited, may I change every sdb to sda in it?

View 3 Replies View Related

Ubuntu Installation :: Format Hard Drive With GRUB Installed

Jan 17, 2011

Upon installation of Ubuntu a while back, i was using a windows xp machine with two different harddrives. Instead of formatting the xp drive and installing Linux, i decided to install Linux on the secondary harddrive. This worked all fine and dandy until recent, when I have found my linux drive filling up near capacity. I would like to format the XP harddrive and mount it in linux to give some more disk space. The problem i have found, is that the XP drive is the drive with GRUB.

View 3 Replies View Related

General :: CentOS 5 Installation - GRUB Installed On USB Drive

May 23, 2010

I installed CentOS via unetbootin and USB stick. Unfortunately, I can not now start my system w/o my USB usb drive.

View 1 Replies View Related

Ubuntu Installation :: Installed Kubuntu For The Wrong Archetecture

Jul 10, 2011

A couple weeks ago I became fed up with using Backtrack5 as a primary OS, as fun as it is, and installed Kubuntu 64-bit for AMD on a laptop with an intel chip. I didn't see an intel iso on Kubuntu's site right away, and I suppose I was too excited to try it to care. I have been having some problems with plugins working correctly, but i'm not even sure this architectural mixup is to blame for that.

To cut to the chase, should I be worried about installing kubuntu that was intended for AMD on a board with an intel chip? I figure i havent really done anything I can't easily redo yet, and if I want to reinstall, i'd like to do it before I cross that bridge!

View 1 Replies View Related

Ubuntu :: Grub Not Booting After New Hard Drive Installed?

Jan 15, 2009

I installed a new hard drive to my system. I use a program called R-Drive image to copy all my os to my new drive. It done a pretty good job too, its an exact copy. I deleted the old one. But obviously now I cant boot. I had a look at the menu.lst file i dont know what to change it to. heres my drive setup,

C: - Windows Vista - Ubuntu
D: - Documents - Swap File
E: - Games

View 9 Replies View Related

Installation :: Grub Points To Wrong Kernel

Mar 5, 2009

It points to the old Fedora kernel, and needs to be directed to the pre-installed kernel. What will the new menu entry be after it loads?

View 1 Replies View Related

Ubuntu Installation :: Grub Reinstall Went Wrong After Windows Wiped It Out

Jan 9, 2010

Some days ago I decided to reinstall windows, of course windows wiped Grub of the MBR. No problem. I booted of the live CD (9.10) and tried to reinstall grub, I had Ubuntu 9.10 installed before windows wiped grub. I tried the following tutorial: [URL] My fdisk -l output is the following: root@ubuntu:~# fdisk -l

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000f2962
[Code]....

sda3 is my root partition, sda2 is the partition where all my media files are located. I mounted /dev/sda3 to /media/root and then I tried to reinstall grub with: sudo grub-install --root-directory=/media/root /dev/sda It came out with no errors, and then I restarted my computer. Grub started, but with a command line. It was the 1,97 beta-4 version. Since I'm quite unfamiliar with GRUB (or really technical linux stuff)

View 3 Replies View Related

Ubuntu Installation :: Grub Installs On Wrong Disk And Overwrites Win 7 Mbr (more Than Once)

May 20, 2010

I recently bought a new Gateway desktop. I use mostly Ubuntu but like to boot into Windows once in a while. Have used Ubuntu as my main OS for about 3 to 4 years, dual booting. After the Ubuntu 10.04 release, I decided to throw in another hard drive into the new computer and make it dual boot.

Mistakes:

1. I did not create the Gateway Recovery Disk in Windows before installing Ubuntu.

2. Installed Ubuntu 10.04 without disconnecting the Windows 7 drive.

3. The Ubuntu install never prompted me asking where to install Grub (apparently there is an advanced menu somewhere in the install process that lets you select), and it was installed to the first drive on the PC by default, which happened to be the Win 7 drive.

This left the Windows 7 unbootable because it did not appear in the Grub menu. I did some searching and managed to install Grub on the second drive (the one with the Ubuntu install) and also managed to add Windows 7 to the Grub menu so I could boot into Windows. This last procedure added the Windows 7 option to the Grub on both drives.

I then managed to fix the Windows 7 mbr using /fixmbr and /fixboot. The problems I still have are as following. I can't create the Windows Gateway Recovery Disk in Windows. Every time I try, I get a message telling me "Hard drive configuration is not set to the factory default. Restore aborted.". I already disconnected the Ubuntu drive but get the same results. I know this one is not a Linux issue, but maybe someone had a similar issue and might be able to help.

The next problem I have is that it looks like after the las Kernel update in Ubuntu, Grub overwrote the Windows 7 mbr again. Is there a setting file somewhere that now tells Ubuntu that Grub is installed in two places and that whenever there is an update it updates both? Can I change this? I really would like to avoid re-installing Ubuntu to fix this.

View 9 Replies View Related

Ubuntu Installation :: Update From 8.04 To 10.04, Cannot Boot, Wrong Grub Root?

Jun 6, 2011

I just updated my server from Ubuntu 8.04 to 10.04 and now it cannot go past grub, at boot time, it would "give up waiting for root device", asking me to check whether I gave the right "root=..." or if I should increase the "rootdelay=..." in the command line argument and end up with the initramfs.

The machine is a Dell Poweredge 2900 with a HW RAID controller (I hope that should not matter, but just in case...). I tried to follow the instructions there to make sure grub is setup correctly, but without any luck.

Below is the output from the bootinfoscript (while running on the LiveCD). Anybody has any idea what can be the problem or what I could do to debug this ? I am running out of ideas.

[Code]...

View 1 Replies View Related

Ubuntu Installation :: Installer Automatically Going To Wrong Hard Drive?

Apr 18, 2010

I'm running into a weird problem when trying to install from the live CD I'm running. Basically, I have two hard drives: sda, a 160GB HDD which has Windows 7 on it, and is the one I would like to put kubuntu on; and sdb, which is a plain 500GB NTFS file system I keep all my personal stuff on.When I get to 'disk setup' and choose 'install side-by-side', it defaults to sdb instead of sda and I can't change it. I've created a 20GB partition on sda, which is where I want to put kubuntu, but it still defaults to sdb. I also can't figure out how to install to where I want using the advanced partitioning menu.

View 3 Replies View Related

Ubuntu Installation :: Wrong Drive Mounted As /boot During 10.10 Install?

Mar 19, 2011

My old server machine running Ubuntu 6 experienced hardware failure, so I built a new machine with spare parts and decided to install 10.10. I used the 2 HDDs from the old machine and decided to use existing partitions for the 10.10 installation. I specified the existing partitions on a 250 GB PATA drive for root, /boot, /home, and swap. For some reason when I booted up 10.10 for the first time, the other HDD (750 GB SATA) was mounted as /boot. I never specified the second drive to be used for anything during the installation, so I have no idea why this happened.and how can I change the mount point for /boot? I would like the highlighted partition in the attached screenshot to be /boot. I really hope nothing on the 750 GB drive was overwritten in this whole process, because it contains all of my photo and video backup.

View 1 Replies View Related

Ubuntu :: Check What Version Of GRUB Installed - The Program 'grub' Is Currently Not Installed

Dec 18, 2010

I wanted to check what version of GRUB I have installed. I went to terminal and typed grub --versionI got this message back: The program 'grub' is currently not installed. You can install it by typing: sudo apt-get install grub

I am running Ubuntu 10.10 alongside windows xp pro. When I turn my pc on I have the option to boot to ubuntu or xp and at the top of the window it says that the version of grub running is "GNU GRUB Version 1.98+20100804-5Ubuntu-3" how I shold go about installing GRUB 2 or just leave it as is.

View 2 Replies View Related

Fedora Installation :: Dual Boot - Installer From F13 LiveCD Doesn't Detect Other OS - So Grub Conf Is Wrong

Oct 13, 2010

I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:

So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.

However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.

Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.

The result is that I can boot to either OS by changing the boot drive priority in BIOS.

I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?

View 12 Replies View Related

Ubuntu Installation :: Possible To Have OS Installed On USB Drive?

Nov 2, 2010

I am a beginner in ubuntu and wanted to try this OS. I have been using a USB as a live CD but its not a persistent drive and any changes (in terms of drivers and such) are lost on reboot. Is it possible to have the OS installed in a USB drive instead of the hard disk? If yes I would like some directions as to how this could be done or maybe a guide for it if there is one around. I am using a Ubuntu 10.10 USB live CD currently and my Laptop has Windows Vista as OS.

View 3 Replies View Related

Ubuntu Installation :: Installed 10.4 GRUB Doesn't Load

Jun 25, 2010

i have Vista 64Bits Ultimate installed on an 1TB hard disk whit 3 partitons I have a 2nd 160GB HD in my system which i installed Ubuntu 10.4 on. All went ok, except after the installation finished and the system rebooted it booted straight into windows, whitout ever displaying GRUB. Now i found a way to boot either system, by using the bios and setting the applicable HD to 1st device. (or something similar)

Any way on how to solve this? keeping to have to enter the BIOS to select the HD and Thus OS i want to boot aint very practical. (im currently using ubuntu BTW)

Code:

Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.

[code]...

View 9 Replies View Related

Ubuntu Installation :: Installed Grub On Windows Partition?

Mar 8, 2011

I just installed ubuntu on a partition on my laptop that already had a windows7 partition. First I had Kubuntu installed, but I decided to just try Ubuntu instead. I did things the right way when I installed Kubuntu and I could switch between OSes on reboot. Then when I installed Ubuntu I accidentally put grub on /dev/sda1 instead of /dev/sda. I didn't even notice for a while because I never felt like I needed to go back to Windows until I felt like playing starcraft 2. That's when I noticed that when the boot options screen appears and I select Windows, the screen goes black, a cursor flashes in the upper left corner for about a second, then the boot options screen reappears.

If I boot using my windows 7 cd and go into recovery, get a command prompt and type Bootrec.exe /FixMbr and Bootrec.exe /FixBoot, the options appear to complete successfully, but then when I reboot, I get a permanent flashing cursor.

If I follow that by inserting my parted magic cd and running testdisk and overwriting the mbr, I get back to the first situation where the boot options screen will appear, but the windows boot loader just returns me to the boot options screen. I can get into ubuntu, at least. Whenever I run testdisk I can't replace the boot with the backup boot because I'm pretty sure it's identical to the flawed one.

View 9 Replies View Related

Fedora Installation :: How To Get Just Grub Installed

Dec 10, 2009

I tried upgrading to my linux to fedora 12 through updates and that completely screwed up my computer. Next I burned a disc with F12 and tried to a clean install but the installer stops after 823 packages. I tried an older FC9 image and that does not go through either. Now I'm stuck , I cannot get to my windows because I cannot get to GRUB . Is there a way to just install GRUB and boot into windows. I see that GRUB is around package # 600 or so in the installation and it does get upto that point.I just need it to finish instead of barfing on packages (no skip option in linux installer how clever!)

View 1 Replies View Related

Ubuntu :: Installed The Wrong Version ?

Mar 5, 2011

How can I delete the other one and install the right one? I installed the desktop version and I needed the netbook version. Can I delete the partition and install the right version like new?

View 9 Replies View Related

Ubuntu Installation :: USB Pen Drive - No Bootloader Installed

Dec 15, 2010

I am installing Ubuntu 10.04 server on a box with no optical drive, using a USB pen drive created using Ubuntu's Startup Disk Creator. Installation works just fine. However, instead of installing the MBR/grub2 on the hard drive it is installing it on the usb pen drive - i.e., I can't boot without the pen drive being the bootable device. I tried 'grub-install -root-directory=/boot /dev/sdb', but that didn't work.

I then tried 'apt-get purge grub-common' and then 'apt-get install grub-common'. There is a known bug where it tells you that there is no bootloader installed and do you want to continue without one Y/N - N just sends you straight back to the same dialog instead of installing. I'm not interested in recovering as it's a brand new install - easier just to redo it correctly from the start. So the question is this: how can I install from a USB pen drive and have the bootloader install properly?

View 3 Replies View Related

Ubuntu Installation :: Can't Access Drive In Which OS Is Installed

Aug 26, 2011

I have windows in c: and now i have newly installed Ubuntu in c: through Wubi Now I see only my d: in ubuntu, How to access c: ? Can someone help me with this ? I am pasting the o/p of mount command.

/dev/loop0 on / type ext4 (rw,errors=remount-ro,commit=0)
proc on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)

[code]...

View 1 Replies View Related

Ubuntu Installation :: Installed RT Kernel But No Grub Menu Shows Up

Mar 8, 2010

I use Linux Mint, and I installed a linux-rt from the repository, but when I restart my computer no grub menu shows up. It just boots linux mint. How can I get it to show the menu so I can choose the real time kernel?

View 1 Replies View Related

Fedora Installation :: Sata 1 Was NOT Installed With Grub?

Feb 15, 2010

Prefactory note - I've also posted this question on the Ubuntu forum, but so far no solutions have been provided.

My system has several hard drives. The important ones are these:

Sata 1 - Fedora 12
Sata 3 - Windows 7
Slave 1 - Storage

Sata 1 was NOT installed with grub. When I switch OSs, I do it by rebooting and choosing the other drive as primary.

I downloaded an ISO of Ubuntu 9.10 (64 bit) and burned the DVD of it. I backed up Slave 1 and then booted off the Ubuntu DVD. I clicked on "Install Ubuntu", selected Slave 1, and installed onto it.

Subsequently I rebooted the machine, going into the BIOS to boot off Sata 1, so I could get my Fedora Firefox settings to replicate them under Ubuntu.

Instead of Fedora 12 booting, Grub 1.97 came up. It had 5 choices, Ubuntu, Ubuntu Repair, Memtest, some other Memtest, and Windows 7.

Subsequently I tried cracking the box and physically disconnecting Slave 1. When I rebooted Sata 1, it crashed to a grub command line. Apparently when Ubuntu installed, it infected Sata 1 with grub, even though it installed the rest of Ubuntu on Slave 1.

I really, really, REALLY need to get access to the Fedora 12 drive. It's got my work on it.

how I can get grub out of Sata 1 and regain access, or maybe reconfigure it so it recognizes the existence of Sata 1? Personally, I don't want it there; that's why I never installed it in the first place.

View 14 Replies View Related

Installation :: GRUB On A Disk That Is Going To Be Actually Installed On A Different Comput

Oct 8, 2010

I hope I'm wording this issue clearly.I'd like to plug a disk (IDE or SATA) into an adapter that lets me plug it into my workstation via USB. (E.g. N82E16817153071 at newegg) It will show up as /dev/sdX where X is some arbitrary letter depending on what other disks the system happens to have.

I'd like to have a script then partition, format and copy files onto it. Then we need to install GRUB on it.

Then I will remove the disk and install it permanently into a different computer, here it will either be /dev/hda (if IDE) or /dev/sda (if SATA). However, it seems that in general when you install GRUB on a disk, it assumes it is going to be the same disk that boots??

I am first trying an IDE disk so it will be /dev/hda. I get a "GRUB Hard Disk Error" when booting it as /dev/hda rather than whetever it was on the USB adapter. I used this to install grub:

grub-install --root-directory /mnt/removable/ /dev/sdX Where X was the appropriate letter based on the USB adapter. Then I fixed /mnt/removable/boot/grub/device.map to use /dev/hda../dev/hdc instead of sda..sdc.

I haven't found much about this specific scenario I have so far on the web. I am guessing that stage1 is either attempting to find files based on what the original workstations primary disk geometry was, or it's assuming that the disk is the same location as it was when it was a "removable" one (i.e. /dev/sdX or (hd5) or whatever, when it should just be looking at (hd0).

The goal is to do this kind of installation easily and quickly, and not have to do it individually on each final computer via install CDROM or whatever, or reboot the workstation each time in order to attach the disk as the same location there, etc. (This is a manufacturing setting).

View 6 Replies View Related

Ubuntu Installation :: Bootloader Installed On Jump Drive?

Mar 30, 2010

I just finished installing lucid lynx netbook to my jump drive (full install) to save room on my hard drive. It's working fine except the bootloader was installed to the jump drive as well, meaning I can't boot my computer without the jump drive. Is there any way to correct it so that the computer boot from the hard drive while keeping my install on the jump drive?

View 2 Replies View Related

Ubuntu Installation :: Booting An Already Installed From Usb External Drive?

Apr 5, 2010

installed Ubuntu 9.10 in an internal SATA drive and used it for quite a while, but yesterday my laptop's graphics card decided to die, and it looks like it will be a full month until I get replacement m/b. Therefore, I bought an external USB SATA Hub for my laptop's drive, but I can't seem to be able to boot ubuntu from this drive. I'm trying to boot with this external usb hub attached to an old P4 machine with USB booting enabled.I get till the grub screen, but as soon as the message "Grub loading" appears, I get a message saying:error: no such partitionand I get a prompt as follows:grub-rescue>I guess grub is trying to boot to a different device name... It's weird, I thought Ubuntu should boot irregardless of which interface I use, be it SATA or USB.

View 2 Replies View Related

Ubuntu :: 10.10 Wubi Installation Not Mounting To The Drive Where It Is Installed

Dec 7, 2010

I have a ubuntu 10.10 wubi installation. It is installed to drive g:. While using ubuntu it is not showing me option to mount to this drive. It is showing all other drives.

View 2 Replies View Related

Ubuntu Installation :: 'No Operating System Installed' - GRUB Doesn't Appear To Exist

Feb 12, 2010

I have a dual boot windows XP/ubuntu 9.10 set up on one hard drive. Everything was working fine. The 9.10 install had been updated from 9.04. I recently had problems with the XP partition (XP basically collapsed) so I re-installed XP on the same partition it was on before. I then attempted to reinstall Ubuntu ( I decided I wanted a new 'clean' installation of Ubuntu as well). When I got to the partition function it refused to recognize that there is a Windows partition, or a previous ubuntu partition, but states 'No operating system installed' or similar, and offers the entire hard drive for installation. When I look at the partitions using Windows partition software the Windows and the ubuntu partitions are clearly in evidence. I have also tried to reinstall GRUB but it doesn't appear to exist.

View 3 Replies View Related

Ubuntu Installation :: Adding Windows 7 To Grub Menu (Installed On VirtaulBox)

Apr 3, 2010

I recently installed Windows 7 on Virtual Box (running within Ubuntu Karmic 9.10), and it runs great. However I want to also add Windows 7 to the Grub Menu, so I can choose at the start between the Ever-Glorious Ubuntu and the Depressingly-Drab Windows 7.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved