Windows 7 was pre installed on my PC. I installed Ubuntu 10.10 along side with Windows 7 using live CD.After installation i am allowed to enter only to Ubuntu.No bootmenu (grub) on startup - can't choose OS.
Code:
$ sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]...
I have a problem when i installed ubuntu via usb drive and cd.. and i try it in windows xp and windows 7. it's a same problem .. but this is the error message " permission denied "
The log:
Also i try this v Ubuntu 11.04 Ubuntu 10.10
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
following is my fdisk:
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xed73ed73
[Code]...
I installed ubuntu 10.10 32bit on my HPDV6 laptop and I selected "Install alongside other operating systems" setting and Installation went fine. But after restart I got GRUB panel and selected Windows 7(loader) dev/sda1 for boot. It comes with the widows 7 log on screen and after few seconds the scandisk and it says my c: (windows) drive need to be "scan for consistency". But scan is also not running and it terminates. But after that Windows 7 loading fine. Every time I select windows 7 and this error is being occurred.What should I do now for get rid of that scandisk problem? Is the problem with GRUB?
View 3 Replies View Relatedi have windows 7 on my laptop and i had recently installed debian linux. i realized that debian did not support my laptops hardware so i have decided to install ubuntu which i should have decided to install at first. now i am stuck with a 45 gb partition that i want to install it on and a 250 gb with windows 7. i deleted debian off of the 45 gb and now i cant even go into my windows 7. I really need help on wat to do. yes i want to keep my windows 7 and all its folders. when i am trying to install by specifying partitions manually. when i try to that on the 45 gbs is says no root file system defined.
View 1 Replies View RelatedI just installed ubuntu on a partition on my laptop that already had a windows7 partition. First I had Kubuntu installed, but I decided to just try Ubuntu instead. I did things the right way when I installed Kubuntu and I could switch between OSes on reboot. Then when I installed Ubuntu I accidentally put grub on /dev/sda1 instead of /dev/sda. I didn't even notice for a while because I never felt like I needed to go back to Windows until I felt like playing starcraft 2. That's when I noticed that when the boot options screen appears and I select Windows, the screen goes black, a cursor flashes in the upper left corner for about a second, then the boot options screen reappears.
If I boot using my windows 7 cd and go into recovery, get a command prompt and type Bootrec.exe /FixMbr and Bootrec.exe /FixBoot, the options appear to complete successfully, but then when I reboot, I get a permanent flashing cursor.
If I follow that by inserting my parted magic cd and running testdisk and overwriting the mbr, I get back to the first situation where the boot options screen will appear, but the windows boot loader just returns me to the boot options screen. I can get into ubuntu, at least. Whenever I run testdisk I can't replace the boot with the backup boot because I'm pretty sure it's identical to the flawed one.
I installed Ubuntu 9.10 from Windows 7 and given 17GB default space for Ubuntu. I installed different programs and ...now I ran out of disk space when I tried to install Oracle XE. I tried GParted from Live CD to allocate the space, but it shows the complete partition as single partition for Windows and Ubuntu of which I could not able to allocate the specific space to Ubuntu.I don't want to reinstall the Ubuntu again as there's a lot of office work has been done.
View 2 Replies View RelatedSo I JUST installed 10.04 on a new hard drive for the third time. I had it completely wipe the hard drive and install ubuntu itself (so i couldn't mess anything up). Well NOW it won't even boot up ubuntu much less my windows hd.
So the setup is, my first harddrive which is 640gb and has my windows on it, and then my second harddrive which is 80gb and has my freshly installed ubuntu 10.04 on it. Neither will load. I don't even get a loading screen, I just get a flashing line after my mobo's splash screen.
I ran some boot loader info script and one of the first lines was
Code:
No boot loader is installed in the MBR of /dev/sda
I am not been able to re size the partition. Can anyone please help. I tried to re size and install ubuntu 10.04 on two machines but it did not work. Details are HP mini ( windows xp pre installed with new ntfs partition). Lenovo thinkpad ( windows vista pre installed).Is new windows partition is non - re sizable?
View 7 Replies View RelatedI have a Lenovo laptop with Windows 7 pre-installed. I would like to dual boot Win 7 and Ubuntu or Linux Mint.
In my old laptop I had an OEM Win XP disc that I bought specifically for dual boot purposes (didn't want the pre-installed vista). This only has a one PC usage though unfortunately.
how to make a windows 7 boot disk? I made a RECOVERY disk already, but I don't think that will work as a boot disk right? Particularly if I completely wipe out or swap out the HDD (which I might do).
fyi: I NEED Win7 for a few special programs for my school. WINE will not work and VirtualBox puts to much strain on my computer.
I have a host ubuntu 11.04 with guest window 7, I have installed ubuntu OSE then install windows 7. Now I want to copy some files to windows 7 running on OSE on windows 7. How do I do this ?
View 5 Replies View RelatedI recently installed Windows 7 on Virtual Box (running within Ubuntu Karmic 9.10), and it runs great. However I want to also add Windows 7 to the Grub Menu, so I can choose at the start between the Ever-Glorious Ubuntu and the Depressingly-Drab Windows 7.
View 1 Replies View RelatedI recently installed Lucid Lynx inside my Windows XP using Wubi. When I restart I don't have a boot screen giving me the option to boot into either or, it just boots directly into XP. How do I fix this so I can boot into Lucid?
View 1 Replies View RelatedI want to upgrade Ubuntu 10.10 installed through Wubi to 11.04. Now, Windows doesn't work. I can't upgrade Ubuntu by it because it is impossible to download files. Can I upgrade it without connecting Ubuntu to the Internet and starting Windows?
View 5 Replies View RelatedI've just installed 11.04 on a new machine, to be dual booted with Windows 7. The installation process completed, popped the disc back out, but when booting up I get no boot menu and just load Windows 7. I don't get any error messages or any sort of feedback. If i go into BIOS, I only have Windows 7 as a bootable option. I presumed grub or an equivalent would be installed as part of the installation.
View 9 Replies View Relatedhow to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.
View 3 Replies View RelatedI have a Lenovo T500 laptop with 4 GB RAM. I have installed Windows 7 64bits OEM on my laptop HD. I also installed Fedora 14 on my USB External Hard Drive which it has it own boot sector. I don't want to have a dual boot. So if I plug in my external HD to my laptop and turns the machine on, it automatically my Fedora comes up, other wise my windows 7. (I set up start-up boot drive , first to USB External HD and then internal HD)
I installed KVM (Virtual Machine Manger) on my Fedora 14 and I am trying to install windows 7 64bits OEM on my Fedora 14 as Virtual Machine. After setting everything and start installing windows form CD, I got BLUE SCREEN right after "WINDOWS FILES LOADING..." finished. it shows me a blue screen and then it will stop
Questions:
1- How can I fix that problem?
2- Is ther way to make a Virtual Machine on my Fedora using my exiting installed windows 7 on my laptop HD?
Last week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as -
System ManufacturerVIA Technologies, Inc.
System ModelKM266APro-835
System TypeX86-based PC
[code]....
I have a Vista/Kubuntu dualboot, with grub2 as my loader. Because i have read that Windows likes to ignore something else present on the system and overwrite everything with itself. So i installed Vista, then Kubuntu.Now i want to upgrade my Vista to Win7. My question is - what should i do in order to keep my current dualboot intact (Grub2 as a loader, and kubuntu fully functional). I fear Win7 might even never ask me about keeping my kubuntu dualboot, just overwrite everything. PS: My bootinfoscript output
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
i have just installed Ubuntu 10.10 on a pre installed windows 7 system. Ubuntu is working really well but the only problem is that when I try to boot into windows,
I get the windows sign and then I get a black screen and windows does not load. It seems to be an easy problem to solve because I can actually boot windows 7 in
safe mode with no problems at all! The problem is there when I try to boot windows 7 normally. To be honest I only need windows for a project that uses MSQL server.
I have 10.10 installed within my Windows Xp.All was fine.Then,I upgraded to 11.04.Boot screen etc is fine .Log in is automatic in Classic.Unity & Compiz not supported.Now,again everything is fine except that my xp partitions are not recognised and hence I can not mount them and access them.
View 5 Replies View RelatedI had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I just bought a new Windows 7 machine and want to install Ubuntu 10.10 for a dual boot environment.There's a lot of info describing how to do this, but it all describes re-partioning the Windows drive, burning Ubuntu on a CD, inserting that CD, etc. I had a dual-boot Windows and Ubuntu machine that just died on me. Windows was on one hard drive and Ubuntu - along with my entire software development environment - was on the other. As far as I know both drives are fine.
When my new (Windows) machine gets here I want to open it up and stick in the Ubuntu hard drive from my old machine... but then I'm not sure what to do. I'd really like to be able to boot to that hard drive (or the Windows one), just like I did before. It seems that this should be simpler than installing a fresh Ubuntu from a special CD, after all, everything is already expanded and working on the hard drive. Can someone give me some pointers that will help me solve this problem?
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
I have Ubuntu 10.04 and Windows XP running each one in a partition of two different hard drives. I want to install Windows 7 in a second partition of the hard drive where Ubuntu is running. Windows 7 did not see the hard drive where Ubuntu is running. So I understand that I need to format the partition where Ubuntu is running, install Windows 7 and later on Ubuntu 10.04 which will create the boot for the three systems. But I want to backup Ubuntu's installation, and after installing Windows 7, install the backup. So I will need to add the file for the dual booting. How can I do it? Is it there any piece of software that could create the three booting option that I need?
View 1 Replies View RelatedSo I shrunk my Windows 7 partition. Now I have a 450GB partition with Windows 7 on it and a 50GB partition for Ubuntu that is unallocated space currently. So when I go to the setup for Ubuntu, booted into using my USB flash drive, it doesn't recognise that Windows is there. It thinks that the hard drive, all 500GB of it, is free space. Going into GParted, it also seems to think that the entire hard drive is a blob of unallocated space. According to tutorials online, this shouldn't be happening. It should recognise the two different partitions. So I went into Computer in Ubuntu (Live) just to double-check and indeed all my Windows files are there and I can still boot into Windows just fine.
View 1 Replies View RelatedI just installed Ubuntu alongside windows vista and now cannot reboot windows
View 3 Replies View Relatedhow to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...