I am not been able to re size the partition. Can anyone please help. I tried to re size and install ubuntu 10.04 on two machines but it did not work. Details are HP mini ( windows xp pre installed with new ntfs partition). Lenovo thinkpad ( windows vista pre installed).Is new windows partition is non - re sizable?
View 7 RepliesNow however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I was trying to resize a NTFS partition using GParted and trying to enlarge it using some unallocated space (about 400 or 500 MB unallocated space) but something went wrong and now I am unable to access the NTFS partition. The unallocated space is still there.The error details are reported at the bottom of this mail, plus the content of fstab and mtab.Do you have any idea on what caused the error and how to recover the partition?
View 9 Replies View RelatedI'm trying to resize an NTFS partition on an IBM MT7977 Server. It has a Adaptec AIC-9580W RAID controller. I was thinking about doing it with a gparted LiveCD/LiveUSB, but then I realised that they won't have drivers for the RAID controller. A quick google for "9580W Linux" doesn't return anything promising.
View 3 Replies View RelatedI was installing Ubuntu 9.10 side-by-side on a computer that had Windows XP Pro already on it. I told gparted to start shrinking the NTFS paritition, and about 5 minutes before the read-only test was finished, I shut the lid. Whoops... Forgot to change the power options.
I tell GParted to do a check disk, and gives me the following:
Quote:
It then gives the same error for 65735-65743, and finishes with:
Quote:
Windows of course won't boot, and I won't have access to a Windows XP install disk until Monday night, and there is no floppy drive on the laptop.
[URL] I used testdisk as the replies suggested recovered all my linux partition including my 2 linux distros and boot partitions, but now my windows 7 appeared as unallocated space, which is very ironic, I fixed my last problem only to have situation reversed. I recovered the mbr record from my boot partition, but because that record dose not include the ntfs partition, that partition appears as unallocated space. so how can I make that ntfs partition recognized again so I can update grub and boot to my windows 7 partition? Please help me out, I have had this partition stuck in my computer for a while doing nothing...
View 2 Replies View RelatedI'm running Ubuntu 11.04 on my Acer extensa 5620. I need to install windows and setup a dual boot on this machine. Here's what I did. I followed the instructions on this page
[URL]
and resized my home partition (which is differenet from the file system partition). Anyways, I resized the partition and made a new NTFS partition. This was all done from Live CD. I then rebooted and then tried the windows installation CD. Now here my problem crops up.
Windows says that no partition is found. What have I done wrong? Any ideas? Can the drive be damaged or have I made a mistake some where? I did not specify a mount point for the new NTFS partition, does that matter?
When I installed Ubuntu I set it up to dual-boot with windows and didnt put much thought into the partition sizes, and now I want to make the ubuntu partition bigger. I shrunk the windows partition from gparted fine and then booted up off my ubuntu 10.04 disk to make the ubuntu partition bigger, but it won't let me do so from gparted. Attached is a picture of how my hard drive's currently set up.
View 8 Replies View RelatedI have a 6TB external eSata bay (Lacie BigQuadra). I made a GPT table with only one big ext4 partition. All was ok. I resized the ext4 partition and I created a 1TB NTFS partition. I can use it on Kubuntu but Windows 7 tell me the partition is not formated. When I go back to Kubuntu, parted tell me that the secondary GPT table is not at the end of the disk and tell me it's probably an other OS that thinks the disk is smaller that its real size. It seems Windows 7 thinks the disk size is 2 TB (and modify automaticaly the GPT table and create a secondary GPT table on the middle of the disk).
What can I do to make my NTFS partition visible in Windows 7? What can I do to prevent Windows 7 to move the secondary partition table on the middle of the disk and to modify the primary GPT table ?
gdisk informations
------------------
$ sudo gdisk -l /dev/sd
sda sda1 sda2 sda3 sdb sdb1 sdb2 sdb3 sdb5 sdb6 sdc sdd sdd1
[code]...
When I run out of space on my Ubuntu partition, which will probably happen with me being the untidy person I am, is there a way to resize the partition in Windows or Ubuntu that will allow the other to boot? As I've heard stories of using Gparted to resize a Windows partition doesn't allow Windows Vista to boot up as it removes a crucial part of the operating system? I have adequate space to give to Ubuntu on my NTFS partition. May I also add that to install Ubuntu I had to use the partitioner that came with the installer, because the Windows Disk Manager wouldn't let me partition the NTFS drive, because it Denied my Access.
View 4 Replies View RelatedDoes Ubuntu 10.10 allow you to resize your windows partition and install ubuntu on the resized partition? I'm trying to get ubuntu installed on my laptop but the only option it's giving me is to delete all partitions and install ubuntu. I don't want to delete any partitions because I have backups on my second partition and the first partition has windows on it and I would like to keep it.
I've tried 10.04 and it doesn't give the option for resizing but I thought that one of the versions gives he option for this, is it 10.10? I've tried to manually resize but it won't let me because I have to many primary partitions, so I would have to delete the last partition to get it changed to extended correct?
maybe this is something extremely simple and my brains are just mush after a whole night of struggling (and succeeding) with wifi driver issues.i'm running a brand new 10.10 netbook on a brand new asus eee 1015. i am trying to set up my email in evolution and the evolution windows are larger than the netbook screen, which means that the OK, SAVE, etc buttons are outside reach. i tried to resize, move window - resizing doesn't work and it only moves horisontally, not vertically.
View 9 Replies View RelatedI've installed Ubuntu 10.04 Desktop i386 using "Install inside Windows" option. In the installation i dedicated 3GB for the root parition. Now i have a Windows 7 and a Ubuntu.
Currently, I need more space for the Ubuntu root parition (just 50MB freespace remained!). I realized the it is a simple 3GB file in the Windows and root parition is virtually in that file.
So it should be possible to increase the size of the root parition. But i cannot find any way for this.
I do not want to reinstall the my Ubuntu or add another partition. Is there any painless way to just increase the size of root parition?
I just installed ubuntu on a partition on my laptop that already had a windows7 partition. First I had Kubuntu installed, but I decided to just try Ubuntu instead. I did things the right way when I installed Kubuntu and I could switch between OSes on reboot. Then when I installed Ubuntu I accidentally put grub on /dev/sda1 instead of /dev/sda. I didn't even notice for a while because I never felt like I needed to go back to Windows until I felt like playing starcraft 2. That's when I noticed that when the boot options screen appears and I select Windows, the screen goes black, a cursor flashes in the upper left corner for about a second, then the boot options screen reappears.
If I boot using my windows 7 cd and go into recovery, get a command prompt and type Bootrec.exe /FixMbr and Bootrec.exe /FixBoot, the options appear to complete successfully, but then when I reboot, I get a permanent flashing cursor.
If I follow that by inserting my parted magic cd and running testdisk and overwriting the mbr, I get back to the first situation where the boot options screen will appear, but the windows boot loader just returns me to the boot options screen. I can get into ubuntu, at least. Whenever I run testdisk I can't replace the boot with the backup boot because I'm pretty sure it's identical to the flawed one.
What's the best tool or method to resize an NTFS partition containing Windows XP Home but with some evidence of being installed using Windows Vista? (Possible answer: Windows 7...) I bought a Fizzbook Spin, UK version of Intel Classmate PC with touchscreen. Disk is about 55 GB; I want to resize system partition C to about 17 gigabytes and then maintain it using something like partimage on live CD/DVD/USB for complete backup of volume: 15 gigabytes roughly compresses to one DVD, 2 gigabytes for hibernation memory storage which I won't back up (and can't move off C), pagefile on the next volume (probably 4000 MB on FAT32, an affordable commitment of disk space to buy not worrying about the page file size). Plus, I will be able to store the backup of volume C on volume D.
The machine can boot Linux (Knoppix 6.2) from external DVD drive, from a USB flash memory key, and from SD[?HC] card. I don't have a separate Windows install CD or recovery partition, but there's an Intel tool to generate a recovery, um, stick. There's evidence that XP's partition was created by Vista, as follows: 1 MB unused before the system partition; an error message about "correcting errors in the uppercase file" which apparently means "Vista did something on this disk that XP thinks is wrong, but this is not serious" - and several attempts to resize the volume with GParted have left Windows unbootable, blue-screening for a split-second and then rebooting. Apparently that's a Vista experience, and it would've been really bad if I hadn't taken a backup already.
I'm pretty sure that in at least one attempt, I remembered and successfully turned OFF the default-on "Round to cylinder" option in GParted... or is that WRONG? Standard Vista/Parted/resize advice (before 2010) such as [URL] seems to be "Use GParted, then use the Windows Vista installation CD to make your ruined hard disk partition properly bootable again." Since I don't have a Vista installation CD to use or legally borrow for this computer - unless I buy Vista or Windows 7 (which I'm considering anyway, for speech recognition) - I appear to be stuck. I do have more than one other XP computer, in case I can use something from there to exorcise the Vista-ness. But I want to keep the extra software (and device drivers) supplied with this little computer.
After running Lucid since it's release I decided to wipe out my Karmic partition yesterday in order to utilize that space better elsewhere. So I booted up with the Karmic LiveCD, using the option just to check out Ubuntu. Then I opened up Gparted, unswapped (unmounted) the swap partition, made sure nothing else was mounted, and proceeded to delete my Karmic partition which then provided me with about 40 GB of unused space.
Since I wanted to re-assign 10 of those GB to my primary Ubuntu software partition where I keep all of my personal data, I went ahead and resized that one to make it 10 GB larger. First I had to move the empty space over which took several hours, but that wasn't a problem. Resizing the partition wasn't a problem either. Then I wanted to re-assign the remaining 30 GB to my Ubuntu boot partition which contains strictly my Ubuntu system ... and that's where the problem is.
The remaining unused space on the hard disk is located directly next to my Ubuntu boot partition. No matter what I do while using Gparted via the LiveCD, it doesn't seem to be possible for me to enlarge that boot partition. Does anyone know how I can do this either via Gparted, the Disk Utility from Lucid, or even via the terminal?
I'm trying to install Ubuntu on my Mini 700 EL and when I start it doesn't give me the option to install it alongside Windows. Wubi does not give me the option to install onto the system, only to reboot and install it completely. When I try to install from booting from the USB key, I decide to edit partitions manually and I don't get the option of resizing the Windows partition, I can only delete it.
View 2 Replies View RelatedI'm installing 11.04 on a friend's laptop. I'm fairly familiar with Ubuntu, and I'm sure when I've install it previously it didn't take this long to resize the partition. It's been going for around 15 minutes. The loading cursor is still spinning, and the HDD activity light is on almost solidly, but it's been a long time with no updates. The log says only "ubuntu ntfsresize: Please make a test run using both the -n and -s options before real resizing!". Nothing appears to be happening. Is this normal? Never mind, it failed.
View 7 Replies View RelatedI am installing ubuntu on my Delete Inspiron laptop and after selecting "install them side by side" option the window saying "Resizing partition..." on it has come up and just says 0%. I am partitioning so that ububtu has 100GB, but should it be taking this long - it's been about 25 mins. Is this normal?
View 3 Replies View RelatedSome months ago I decided to give a chance to this 'Linux thing'. However, being uncertain of the usefulness and friendliness of it all, I decided to keep my Windows 7 partition untouched and just make a 30 Gb partition to "try out" Linux. As it turns out, it's been some 2 months since I last booted Windows and was now wondering if there's a way to "steal" some space from that W7 partition and add it to my Ubuntu one without messing up files. Some kind of major defragmentation, leaving an empty part of the disk which I could "attach" to my Ubuntu partition. I am using Ubuntu 10.04 LTS version.
View 3 Replies View RelatedI have been using Ubuntu for about a year and I decided to switch to Fedora just to see how it goes with getting everything in my system working again. I would say that with Ubuntu and Fedora installations I have installed and reinstalled 15 times, which I mention because I am not new to installing linux. I have used GParted to partition and resize my HD numerous times and reinstalled linux on a partition and so on. I know how to do all of that without any problems.
NOW HERE IS WHAT HAPPENED... I installed Fedora on my Desktop which I had partitioned into a 190 GB partition onto which Windows is installed and then I had another 30 GB partition onto which I chose to install Fedora. I chose the "replace existing Linux systems" in anaconda... and what resulted was a 30 GB partition with Fedora that is now showing up as LVM. I have never seen an LVM partition and I am not sure if I can use GPARTED to resize it without destroying it. I have used GPARTED to resize Linux partitions before, but they were never showing up as LVM. The forums on GPARTED only show info from about a year or two ago.
Here is what I want to do (and reading around on forums doesn't really give a good explanation of whether it is possible)... Is it possible to install Linux Mint into that 30 GB Fedora LVM partition by just resizing the Fedora part of the volume? So, the question is this: How can I resize the Fedora part of the LVM volume and then install Mint into that LVM partition?
If Fedora was on an ordinary 30 GB partition I would have no problem with using GPARTED to chop that in half and then use the 15 GB I freed up to install Mint. I just don't want to destroy the Fedora stuff by messing around the with the LVM partition so I would like to hear from others who have worked around this issue and please don't link to the ordinary LVM howto's you get through a simple google search as I have already read them and I don't find them too illuminating.
I recently used a GParted CD to resize my partition with Vista installed on it in order to make room for another partition in which I installed Linux onto. I, unfortunately, did not back up my data. My Vista partition now does not show up in Grub and when I set it to just boot to the Vista install it will never boot and is stuck in a loop.
I tried using this guide to try to get it back. My problem comes about halfway through this guide when I go to repair my Vista installation nothing shows up under installations. I would really like to get my data from the Vista partition. I guess if I'm SOL then at least I'll remember to backup my data next time..
My brother the XP/vista/7 lover was wondering what all distros can he run from his XP hard drive
without partitiong,etc like WUBI or Puppy in frugal mode is all I know? So, anyone know of all the distros that can be installed/run in windows without partitioning,etc? I dont have dindows so dont know...?
I was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
View 8 Replies View RelatedSo I am reaching an unfortunate conclusion. I asked this of google and got no straight response so I conclude that it is impossible. taking a look at GParted with my 10.4 boot disk, I see
/dev/sda1 NTFS 74GB boot flag
and
unallocated unformatted 7.84GB no flag
So I assume that that 8gb used to be ubuntu.
In the process of trying to fix things, the computer no longer boots windows.
im trying to shrink my vista partition with gparted inside ubuntu. I run gparted (and yes i have ntfsprogs) but when i select the ntfs partition and select move/resize it brings up free space preceding... new size... and free space following.so when i input the new size the resize/move button greys out and when i change the freespace following it just puts back my original new size and back and forth.from what i have read i need to run the gparted livecd and go from there. is this true? i know how to do it with diskpart in windows, how to in ubuntu and eventually get rid of windows.my system is 64-bit. [URL]
View 5 Replies View RelatedI have a windows partition on my drive, and I want to access it without having to mount it first, etc. There are just two partitions, windows and Ubuntu. I am running Ubuntu 10.04.1 so I want to mount it on startup. I saw this article: [URL] but I don't know if what it describes will work as it's almost 2 years old. I'm not adverse to commands, in fact would probably prefer those.
View 9 Replies View RelatedI tried to search around for a way to access my windows partition from within Linux. I was unable to mount the same using "mount" command. I read of a tool "ntfs-config" as well, this too didn't work for me.
Please share if anyone out there has an idea on how we can access the windows partition (NTFS) from within Ubuntu 10.10 Maverick.
[Code]...
I am running Ubuntu 11.04.
I am having trouble automounting the ntfs partition. When I try to access the mounted partition, I get an error saying that I don't have permission to view the files. Also, I am not able to change the permissions as root.
The relevant line on the /etc/fstab file reads:
Code:
/dev/sda3 /media/sda3 ntfs defaults 0 0
This is not a question, I have done it. I just want to post a little howto in case anyone runs into a similar problem.I will not go into particular details, just the rough description. If need details on something, I'll be happy to explain the part in question.
I am working on linux for almost a decade now. However, there are some things that need to be done on windows, like gaming (ATI drivers for linux are still a bit tricky, especially for newer cards) or rs232 (serial port) based apps (old smartphone management, PIC or ATMega Programming, old graphic calculator like TI92 etc.).So in short, I had once set up a windows system. I wanted to use my files both under linux and windows. The solution for this problem is obvious: I used a NTFS partition I could mount under both OS.Since I am a security concerned citizen, I use to encrypt my disks. However I refused using Vista and Win7 hadn't come out yet, so I was running XP64. The opensource LUKS tools didn't work on that system (driver issues), so I used Truecrypt.Some time ago, I abandoned the windows partition after a fault in the MBR, which rendered the Truecrypt bootloader unusable (yes, even with the rescue disc). Since I rarely have to time play games anymore, that's not a major concern. The rest of the tasks can be handled using a virtual machine (in my case Sun's VirtualBox).So, after about 10 months, I had ended up with a severely fragmented, Truecrypt encrypted NTFS partition which badly needed defragmenting. Linux NTFS-3G drivers have become fairly reliable, but their reliabality decreases as the filesystem fragmentation increases. And the only OS which can defragment a filesystem of this time is windows NT.
Procedure:
The basic underlying problem is that you need to access your raw device from a windows system that by itself lives in an isolated virtual environment. The SMB/CIFS shares are ok to access data, but NAS Filesystems rely on the servers filesystem and cannot be defragmented.What can be defragmented is a SAN share (iSCSI target), because the protocol by itself forwards the device to the host over a network, not the filesystem.
(1)So first of, make sure you have a virtual machine running windows somewhere. it actually doesn't need to be virtual, it can be a remote computer on the same subnet, but in my case, it is a virtual machine. As I said, I used VirtualBox.
(2)Next make sure the Windows box has access to the same network as your linux host. In VirtualBox I used a network interface in NAT mode. I suppose you could also juggle a second loopback device around on the linux host to fulfill the same purpose and keep the windows box of the public network if that is a concern.
(2.5)If you have encrypted your NTFS partition, you need to decrypt it (not mount it!). Using LUKS, use the cryptsetup command to create a decrypted alias of the partition. If you have used Truecrypt, use it's frontend to mount the partition as you would if you wanted to access data, then unmount the alias from its final mountpoint, thus leaving the unencrypted frontend to the partition intact.
So now you have:A linux host with a fragmented NTFS partition (which might be encrypted) that is not mounted.A windows machine (either virtual or remote) with access to the same subnet as your linux host.
(3)Next you need to setup your unencrypted partition alias as an iSCSI target.