Ubuntu Installation :: Just Installed On New Machine Alongside Windows 7 - No Boot Menu
Jun 9, 2011
I've just installed 11.04 on a new machine, to be dual booted with Windows 7. The installation process completed, popped the disc back out, but when booting up I get no boot menu and just load Windows 7. I don't get any error messages or any sort of feedback. If i go into BIOS, I only have Windows 7 as a bootable option. I presumed grub or an equivalent would be installed as part of the installation.
View 9 Replies
ADVERTISEMENT
Oct 20, 2010
I've just installed 10.10 using the most basic options in the installer and allocated space on my boot disk to share it between Ubuntu with XP.
The installation seems to have gone ahead without any glitches, except on reboot, it boots straight into Windows with no option to select Ubuntu.
View 9 Replies
View Related
Oct 22, 2010
I installed ubuntu 10.10 on my lenovo laptop but couldnt get into it. I was having ubuntu 9.10 and installed 10.10 alongside. had Grub loader and all its entries still boot to my 9.10 installation. I could still see my 10.10 partition but dont know how to get 10.10 working. Any ideas?
View 2 Replies
View Related
Sep 1, 2011
I installed 11.04 to dual boot alongside windows 7. I have a toshiba laptop with 2 125gb hdd. I'd like to split the space between the two os's. However, I have a wubi partition and some other ones I'd like to be rid of. When i boot i get four different ubuntu options, a window loader, the grub again. How do I clean this up?
View 3 Replies
View Related
May 10, 2011
I downloaded and installed Ubuntu (most recent version) today from the website to run alongside my Windows 7 operating system. I restarted as requested, and chose Ubuntu, and it said, "Finishing installation" (or something to that effect), counted down from 5, reached 0, hovered at 0 for a minute, then the screen went black.
After waiting a very long time, I pressed ctrl+alt+delete twice and it rebooted the computer. This time, after doing everything like before, it went into Ubuntu and everything worked normally (as if installing properly) and performed a mandatory reboot. Now whenever I try to boot Ubuntu, it gives me a list of things to do on boot (I can't remember them but off the top of my head it is something like
-Ubuntu
-Ubuntu (recovery)
-Windows 7
-Windows 7 Recovery [the ones with windows 7 take me back to the page where I can initially choose which OS to run]
Choosing either of the Ubuntu ones causes a very fast string of words to fly across the screen (too technical to understand and too fast to read, but the word 'failed' jumped out a lot) and then the screen goes black. The computer remains on but the screen remains black until I (regretfully) force off my computer.
View 9 Replies
View Related
Apr 29, 2011
I have already done the installation process following the guide on Ubuntu's site, got everything up and running but the partition that I made in the installer was too small. I was then directed by a friend (a slightly less inexperienced newbie) to modify this through Easeus Partition Manager. I shrunk the Windows 7 partition to only the space that was in use, giving the newly unallocated space to the Ubuntu partition. Set the changes and rebooted the computer, then got the message "unknown filesystem, grub rescue". Now have no idea what to do with this. What happened??
I've been scouring the forums for something helpful but I can't find anything that is a comparable circumstance.I can still access Ubuntu through my flashdrive.
View 14 Replies
View Related
Apr 13, 2011
When I load into winXP I can see the files for winXP and win7. When I load into ubuntu I can only see winXP. i did a sudo update-grub and got the windows loader, which then shows me winXP and ubuntu. what i would love is one boot page that has listed winXP, win7, and ubuntu. FWIW this is an acer netbook, winXP is on D:/ and win7 is on F:/, i used the windows installer wubi for ubuntu 10.10.
View 9 Replies
View Related
Apr 3, 2010
I recently installed Windows 7 on Virtual Box (running within Ubuntu Karmic 9.10), and it runs great. However I want to also add Windows 7 to the Grub Menu, so I can choose at the start between the Ever-Glorious Ubuntu and the Depressingly-Drab Windows 7.
View 1 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Feb 2, 2011
I just installed Ubuntu alongside windows vista and now cannot reboot windows
View 3 Replies
View Related
Dec 4, 2010
I have a Lenovo T500 laptop with 4 GB RAM. I have installed Windows 7 64bits OEM on my laptop HD. I also installed Fedora 14 on my USB External Hard Drive which it has it own boot sector. I don't want to have a dual boot. So if I plug in my external HD to my laptop and turns the machine on, it automatically my Fedora comes up, other wise my windows 7. (I set up start-up boot drive , first to USB External HD and then internal HD)
I installed KVM (Virtual Machine Manger) on my Fedora 14 and I am trying to install windows 7 64bits OEM on my Fedora 14 as Virtual Machine. After setting everything and start installing windows form CD, I got BLUE SCREEN right after "WINDOWS FILES LOADING..." finished. it shows me a blue screen and then it will stop
Questions:
1- How can I fix that problem?
2- Is ther way to make a Virtual Machine on my Fedora using my exiting installed windows 7 on my laptop HD?
View 2 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
Apr 10, 2010
I learn from a BSD magazine and installed PCBSD on my Dell notebok a single harddisk with a hope to have a triple boot. I have all the three OS, but could not find the menu.lst from /boot/grub/.... All I can find is a grub.cfg which is not editable. Someone from this forum said that menu.lst = grub.cfg.
View 4 Replies
View Related
Mar 5, 2011
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
View 9 Replies
View Related
Mar 12, 2010
I have been using ubuntu for about a year while still allowing mself to boot into Windows if I wanted to. Now I just want to switch over to Ubuntu completely. If I do the normal isntallation process, will that wipe off all my current ubuntu and windows stuff? I just want to clean up my computer and don't mind about losing all the files, because I have them backed up. I just wanted Vista off my computer!
View 2 Replies
View Related
Jul 29, 2010
first of all I am a casual PC user so I apologise if this is a stupid question. I was using Ubuntu 10.04 32-bit alongside Windows, choosing between them each startup. It was easy to install and all, but Ive recently found out I was using 32bit version, unlike my 64-bit Windows. Therefore, I guess I didnt get all the performance I could. So I downloaded the 64bit one, butned it to a CD and rebooted PC (I formatted all before so now I have only Win). However, when trying to install Ubuntu64 there was no option to install it side by side and choose on startup. So I went to advanced and there was the partitioning thing. Now I have C and D, each by 120GB for windows and I had left 240GB for Ubuntu. It is disk E, however when I chose to install it there it says there is no root file. I want the whole E disc to be used for Ubuntu and I dont know what mount point and the root thing to choose.
View 9 Replies
View Related
Jan 10, 2011
When I get to the "Allocate Drive Space" section, I have only 2 options, namely "Erase and use the entire disk", which alarms me because I want to install UNR alongside Windows XP on my ASUS Eee PC 1005HA. The other option is "Specify partitions manually (advanced)". For obvious reasons, I am reluctant to try this. I have a C Drive (Windows) and a D Drive (mainly for Backup of Windows). Each drive is about 72GB with about 60GB free on my D Drive. Obviously, this is where I would like to install UNR, but will I have to clear my D Drive completely? I still have about 27GB free on my C Drive.
View 9 Replies
View Related
Jul 5, 2010
After quite a bit of troubleshooting, I have only made my problems dual booting XP and Xubuntu go from bad to worse.
I installed xubuntu on my Windows XP laptop as a dual boot system. (Single 40gb Hard Disk, used xubuntu wizard to repartition XP)
After installation, Windows XP would not boot from the boot menu; it would just go to a blank screen with a blinking cursor in the upper left corner (xubuntu was fine).
So far, I have repair installed (not clean) Windows XP and used the Windows XP recovery console commands "fixboot" and "fixmbr" (fixmbr caused xubuntu to become unbootable with no boot menu) to no avail.
View 9 Replies
View Related
Feb 8, 2011
I'm not very experienced in working with Ubuntu. I did try it using Wubi to install and that I liked very much. But now with the latest version (10.10) the wubi installer isn't showing every option. How do I get the old interface where you can install it alongside Windows? The first attachment is what I get when opening wubi.exe and the second one is what I would like. That is a 10.04 version.
View 9 Replies
View Related
Mar 19, 2011
I just downloaded the Netbook edition of Ubuntu 10.10, and created a bootable USB disk as per the instructions on the website.
I open the OS through my USB, click the "Install Ubuntu" button, click forward, and then comes my problem.
I don't have an option to "Install alongside other OS"
I'm running Windows 7 Home Premium on an HP Mini 210..
View 9 Replies
View Related
Apr 13, 2011
My pc is custom made with the following config:
MOBO: Asus p7p55d-e pro BIOS 1502
GPU: Asus GTS 450 1 Gig
CPU: i7 860
8GB RAM
2 1TB HD, one dedicated to Windows 7 64bit Ultimate
Connected to my LG 42" LCD TV
I asked my friend who is a contributor to ubuntu, and runs a cyber security company to install it on my computer and he said that he will charge me $375 to do this. And then he said that it is not such a difficult thing, however, it will need a lot of tinkering with ubuntu before it works flawlessly. I didn't know what he meant and didn't want to get into it with him. I was wondering if you could direct me to the threads that discuss installation of Ubuntu alongside Windows 7 already installed and on a separate hardware. I don't wanna pay him that money and I'm very new to this. Also, I hope someone could explain what kind of tinkering is done before it works flawlessly.
View 9 Replies
View Related
Mar 11, 2011
i heard this can be dual booted easily alongside windows 7 how do i do this and can it also be done with XP. i would like to keep XP and windows 7 on hand for games and other thing i know i wont be able to do on linux.
View 1 Replies
View Related
Nov 20, 2010
i have been out of the ubuntu loop for several months due to a motherboard problem. i am going to be getting a new 64 laptop for christmas, with a dual core intel processor and windows 7 home premium as the OS.
i am looking forward to having my own computer again will be installing ubuntu on it. but, before i install ubuntu, i would like to know how to remove ubuntu and return the new computer to its original state if it ever becomes necessary.
i was comforatable using programs such as mbrfix along with gparted to accomplish this task with my old computer, but that was a 32 bit windows xp machine.
will i be able to use these programs with my new laptop? i'm unfamiliar with 64 bit systems, windows 7 etc. and how they may differ from the older computer that i was used to.
View 3 Replies
View Related
Feb 3, 2011
I want to install ubuntu and have boot up option. Do I need to partition before downloading ubuntu? Will I be able to access my face book and other chrome pages when I open chrome in ubuntu?
View 9 Replies
View Related
May 3, 2010
It would be nice to get a sticky thread up for dual boot installation issues. It seems like this is a very common problem with the upgrade from 9.10 to 10.04.
I was finally able to solve my issue dual booting 10.04 and Windows XP Home at this thread.
[URL]
I had to reinstall Grub2 and run update-grub.
Then I had to run Rescue on my XP disk. Once to the DOS command line I ran the following command:
C:Windows>fixboot c:
I rebooted and now all is well. I can boot to Ubuntu 10.04 or Windows XP from my Grub menu.
View 1 Replies
View Related
Mar 26, 2011
I have a new Thinkpad which has a boot partition and a Windows 7 partition. (There's a third partition with recovery software that I'll ignore.) I have installed older Ubuntu releases on several other systems and always prepared the partitions in advance and then done a manual installation. This time I prepared /boot, /, /home, and swap partitions.
When I started the install of Maverick, I the installer suggested that the boot manager be in sda1, which is the Thinkpad boot partition. I stopped and read some forum submissions suggesting that the Ubuntu boot manager should go into the first partition, so I removed my /boot partition and let the installer place the boot manager into sda1. Now the boot menu has two links for Windows 7: sda1, the original boot manager partition, and sda2, the original partition for Windows 7. Both links work, so it appears that everything is okay. I just want to know that this is what is supposed to happen.
View 5 Replies
View Related
Dec 31, 2010
Just installed Ubuntu 10.10 onto my new netbook from a USB stick. The laptop came with Win7 Starter, which I kept on a small partition. Installation was apparently successful, but when I start up the computer, it will go straight to Win7 and GRUB doesn't appear.
View 9 Replies
View Related
Jun 28, 2010
I'm an unexperiences Ubuntu user havning installed a dual boot with Windows XP and Ubuntu 9.10. However, when I'm booting my system now, the Windows option has disappeared from the menu, and the list only contains many different updates of my Ubuntu system. Can anyone try to explain me how I can retain my Windows option?I onlyuse Ubuntu for programming purposes, so skills regarding this topic is very poor
View 6 Replies
View Related
Aug 27, 2010
I am not able to see the existing windows OS already installed when the machine is booting.When the machine boots up I see a blank screen and it boot directly into Ubuntu.Here is the results file I have collected by running the tool:Boot Info Script 0.55 dated February 15th, 2010============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
sda1: __________________________________________________ _______________________
[code]....
View 1 Replies
View Related
Apr 13, 2011
I have two hard drives - (1) 80GB (2) 500GB: the 1st HD has 3 partitions (in that order) - Windows 7, Ubuntu 10.10 & Swap. the 2nd HD is for storage only, and has 2 partitions.
I did the following - I installed Windows 7 on the first partition of the 1st HD, it booted just fine. Then I installed Ubuntu 10.10 on the second partition of the 1st HD.
Windows 7 shows in the GRUB menu alongside with Ubuntu. Ubuntu boots just fine, but when I select Windows it simply restarts the computer and the GRUB menu shows again.
RESULTS.txt of Boot Info Script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #3 for (,msdos3)/boot/grub.
[Code]....
View 7 Replies
View Related
