Ubuntu Installation :: Windows 7 Overriden By Old Windows XP Entry - After Reinstall Grub
Oct 7, 2010
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
View 6 Replies
ADVERTISEMENT
Jan 26, 2010
I currently dual boot and wish to know how to remove the Windows partition/drive while still allowing Ubuntu 9.04 to load safely as my main OS. I know how to restore windows partition by;
If MBR gets damaged boot from MS Windows Xp disc, Select "R" for "recovery console", select main windows installation drive (admin password usually nothing, just press enter) and type "FIXMBR" this will allow you to boot windows again, but Ubuntu partition will be unbootable and require installing ubuntu again to dual boot.
But this leaves Ubuntu partition Un-bootable as it removes the grub menu, how would I do the same for Ubuntu and make window partition un-bootable so I can remove it?
View 5 Replies
View Related
Jul 9, 2010
Ubuntu's update manager recently updated the Grub menu.lst file. It let me decide if I wanted to keep my old menu.lst or the new one. After deciding that I was fine with the new one, I found out that I can no longer boot into Windows 7. I had previously edited menu.lst so that Windows would be at the top of the list, however, I didn't notice that this had put it into the automagic update area, and I realize now that I should have just edited what the default number was instead of moving around the entries.
Anyways, I can no longer access my Windows 7 OS via Grub, and I was wondering what sort of fix I can have for this. I've tried running update-grub, but it hasn't fixed the problem. The Windows bootloader is on the first partition of the only hard drive, as far as I can remember.
View 9 Replies
View Related
Jun 11, 2011
After installing Windows 7 on my laptop, which was already running Natty, I am having issues reinstalling grub. I tried to do this using the method from this tutorial: [URL]... when I enter:
[Code]...
I also tried using --root-directory instead of --boot-directory, and I tried --recheck on both of them without any luck.
View 9 Replies
View Related
Jan 9, 2010
Some days ago I decided to reinstall windows, of course windows wiped Grub of the MBR. No problem. I booted of the live CD (9.10) and tried to reinstall grub, I had Ubuntu 9.10 installed before windows wiped grub. I tried the following tutorial: [URL] My fdisk -l output is the following: root@ubuntu:~# fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000f2962
[Code]....
sda3 is my root partition, sda2 is the partition where all my media files are located. I mounted /dev/sda3 to /media/root and then I tried to reinstall grub with: sudo grub-install --root-directory=/media/root /dev/sda It came out with no errors, and then I restarted my computer. Grub started, but with a command line. It was the 1,97 beta-4 version. Since I'm quite unfamiliar with GRUB (or really technical linux stuff)
View 3 Replies
View Related
Jun 19, 2010
I dual-boot ubuntu 9.04 and windows 7. I recently reinstalled windows, and it wiped grub-legacy off of my MBR. Reinstalling grub shouldn't be tough, right, especially with clear instructions? Anyway, I can't get anywhere with the official instructions here: [URL]. The first issue is that the current live CD has no program "grub" in terminal. I dug up an old live cd, but I couldn't get anything with the directions:
Find where Grub is. If this gives a few different answers then you will need to find the correct one, perhaps by trial-and-error.
find /boot/grub/stage1
That command didn't find anything, nor did some similar commands found on google.
So I'm really at a loss. What should I do?
-Can I install Grub 2 on my MBR? Will that work with 9.04?
-Can I access my 9.04 install, copy files to Windows, and then just format the partition and clean install 10.04?
View 1 Replies
View Related
Jul 11, 2011
I got a system crippling virus on my windows installation. My recovery disks gave me the same problem. So I installed Win 7 enterprise using a disk my dad got from his work. The installation went smoothly. When I started my computer after it went straight to Win 7 without the GRUB bootloader (not the case with restore disks). Could somebody please help me with this issue because I cant stand using Windows for anything other than games much longer.
View 7 Replies
View Related
Jul 23, 2011
This is partly a note to myself for the future and a guide to anyone who experiences similar issues.
So, I had to reinstall Windows XP since my previous installation gave me a blue screen error due to reasons unfathomable. Naturally, this deleted the GNU Grub and I could not login to my Fedora.
I read that apparently booting from a DVD installation offers an option to enter the rescue mode. I did not have a DVD, I only had the LiveCD so I had to figure out a way to reinstall Grub from the LiveCD. The following method seemed to do the trick.
Run the LiveCD and open Terminal.
1. Find the partition where the Grub Stage1 is code...
View 1 Replies
View Related
Nov 15, 2010
I was cleaning old kernels from Grub menu, all sorted except for a vista entry that i could not delete. Ran this line which I found,"sudo chmod -x /etc/grub.d/30_os-prober", to remove unwanted entries, now only the linux entry left in Grub menu, windows 7 entry gone. The vista entry was from an old install which is not there anymore. Running 10.10 at the moment which is dualbooted with win7.
View 7 Replies
View Related
Jul 20, 2011
I have Recently downloaded Fedora 15.|64bit| & I Think its a very good distro. However I Realised Once My Pc Restarted My Windows 7 Was Removed from my boot entry. I am Not At All familar with Linux, Ive Read millions of forums trying to fix my problem but all has failed.Could someone show me how to add The OS Back or How To Burn A Bootable OS (Win7) Using This Distro Of Linux.
View 10 Replies
View Related
May 31, 2011
I followed the instructions from this post to reorder my boot options. But somehow I was stupid enough not to copy the windows entry, as indicated (I was mainly following only terminal instructions and such).Now I have a grub menu without my Windows 7 entry, please tell me there is a way to restore it.
View 9 Replies
View Related
Jul 12, 2010
I need to reinstall my windows 7 partition, but I don't want to lose my ubuntu partition. Currently I just have both installed and grub is dealing with my booting options.Is there any way I can reinstall windows without messing up grub or my ubuntu partition?
View 5 Replies
View Related
Apr 18, 2011
I'm running dual OS Windows Vista Bussiness and Ubuntu 10.10 on my acer notebook. But a few days ago after I update the kernel (I think), I can't boot to my windows OS. It's only stuck at boot screen (progress b4 logon to windows), so I want to reinstall my windows with windows XP. But, if I do this, the grub must be replace by windows bootloader. how to reinstall the grub?? will the new grub, allow me to load the latest kernel which already install on my Linux?
View 1 Replies
View Related
Jan 5, 2010
How do I reinstall GRUB after a Windows install? I tried using the LiveCD but when I pop in the CD and type
Code:
View 2 Replies
View Related
Nov 21, 2010
I re-installed Windows over an old Windows partition. The hard-drive used to have Windows and Ubuntu on it. I am now in usb live ubuntu because grub doesn't appear anymore when I boot the computer (it boots in the new windows automatically). The ubuntu partition is still there, as I can access my files from this live usb. I'd just like to know how to re-install grub.
View 1 Replies
View Related
May 26, 2011
I have (had) a dual boot system of Ubuntu (11.04) and Windows 7. I was forced to reinstall Windows over itself and it installed its boot loader. How do I get my Grub boot loader back? I googled it and found instructions, but they were from 2007 so I thought it might only be for Grub Legacy. The instructions were as follows:
Boot from a live cd
run "sudo grub" in a terminal
then, "root (hd0,0)", "setup (hd0)", and "exit"
reboot and grub should be present
While I wait for ubuntu to download so I can create a live cd, can someone confirm if this is correct for Grub 2? Also, what commands will tell me which hard drive and partition I need to put in the above commands (hd0,0)? I have (4) internal hard drives and boot drive has a few partitions on it.
View 4 Replies
View Related
Jun 26, 2011
So, I'm stuck in GRUB rescue mode (stupid mistake) on a dual booted netbook (so no cd and no recovery software)
I do have a Live USB so I'm working off that.
Is there a way to reinstall the GRUB to my other partition (windows 7) or fix the MBR without recovery software?
View 9 Replies
View Related
Dec 26, 2010
for some reason Win7 has gone and run a startup repair (there was two boot options in GRUB, perhaps I chose the wrong one by accident) which has corrupted my GRUB. Now, the only way I can get anything to run is by booting Ubuntu of a live-pendrive/flashdrive! I tried following a couple of walkthroughs that claimed to fix the problem; and I don't doubt that they work - on someone elses computer! I receive errors whenever I try to use things like 'sudo grub' and often (but not always) with 'mkdir' and 'mount' - and I have very little idea what some of them are doing (I gather 'mkdir' is making a directory and 'mount' is mounting a device virtually, but some others are a little harder to guess)
So, I am wondering if someone has a little insight as to how I can fix this and perhaps point me in the correct direction to learning about making my way around ubuntu and these fancy terminal commands! Currently, I am at the stage where I can boot into my flash drive by spamming escape before the bootloader. However, when GRUB loads it tells me there is an error and gives me a command line; through which I have been unable to get anything to happen. I am running Ubuntu 10.10, I believe, and Windows 7 on the same hard-disk and possibly the same partition (though, I am unsure of how Ubuntu works itself into partition's). I also ran a little code (seemed somewhat like a batchfile in windows) that made a txt file of my boot info; I'm attaching it below if that helps at all. Boot Info Results:
[Code]......
View 9 Replies
View Related
Nov 19, 2010
I had a dual boot system - windows in primary active /dev/sda1 and fedora in /dev/sda5 onwards till /dev/sda7 ( /boot, / and swap partitions).I reinstalled windows vista and it removed grub and replaced it with the MBR or windows loader.So now I can't boot into the linux OS. I tried out a live cd and tried grub-install --root-directory=/mnt/_boot /dev/sda (after mounting /boot partition at /mnt/_boot location from the live cd.)But on reboot I donot get the menu.lst options, only the black screen with a grub prompt.
View 3 Replies
View Related
Sep 1, 2010
I had two OS in laptop windows vista and linux mint and when I used to start my computer I used to get different option for os like linux mint, linux mint memory check, windows vista etc.. but because of virus windows vista got crashed so I formatted disk drive C: which were containing windows vista and reinstalled fresh copy of vista.. but now when I start my computer vista start automatically, I do not see GRUB options to run windows os or linux mint..Is there a way to reinstall GRUB to get options like I used to get before formatting ?
View 1 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Mar 5, 2011
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
View 9 Replies
View Related
Aug 5, 2011
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
View 1 Replies
View Related
Aug 17, 2010
Ive installed a fresh copy of ubuntu onto my laptop, dual boot with 7. Everything runs smoothly except the grub. So in grub i have an entry of vista loader. I have removed the ubuntu recovery mode and the memtest entry so now i have 3 entries
Ubuntu
vista loader
7 loader
How i can remove the vista loader? PS i have never had installed vista onto my system i bought it brandy new with 7 pre-installed.
View 8 Replies
View Related
Jun 13, 2011
On my laptop running Ubuntu 10.04 I have edited /boot/grub/grub.cfg in order for the shortcut keys for changing brightness and volume to work. I added
Code:
acpi_osi=Linux
at the end of every kernel image line, and it works ok. The only problem is that every kernel update overrides the grub.cfg and therefore I have to reedit the file over and over again. So the question is, where could I put the mentioned kernel startup parameter, so that it doesn't get lost on every kernel update.
View 3 Replies
View Related
Feb 16, 2010
I installed Ubuntu 8.10 with Wubi under Windows XP. Now the Windows XP installation is damaged due to some filesystem stuff and doesn't boot anymore. Ubuntu still boots and works well.So I want to reinstall Windows.But, I want to use Windows 7 instead of XP. What I want to achieve is, that after the reinstall process I have the same Dual-Boot menu but with Windows 7 and Ubuntu.Windows XP is currently installed on Windows Partition C:, Wubi/Ubuntu is installed on another partition D: (where also a lot of Windows files are located).So can anyone tell me the steps, or point to some documentation how to do this? I don't actually think it's a huge problem, but I wanted to know in advance, what exactly to do before the point of no return. It's extremely important that the ubuntu installation will not be damaged or sth.
View 9 Replies
View Related
Sep 30, 2010
I have Ubuntu 10.04 on my laptop. If I wanted to reinstall Windows Vista over the top of Ubuntu 10.04, do I just install Vista normally, as if I was reformatting the hard drive?
View 3 Replies
View Related
Nov 30, 2010
I was wondering if i could reinstall the windows bootloader with the ubuntu installation cd..because with the current ubuntu installation the windows 7 installation dvd doesnt load up. when i use a windows xp cd, the computer tells me that there is no active hard drive. other linux distros work just fine
View 7 Replies
View Related
Mar 25, 2011
I currently have Ubuntu 10.10 64 bit installed and I would like to reconfigure my partition so I can reinstall Windows 7 � 64 bit on my computer.
I have the recovery disk that HP sent me and I have tried Virtual Box and no luck, so just to avoid any problems I would like to spilt the partitions and set up the grub bootloader so I can have Ubuntu and Windows as a choice a start up.
Is there an easy way to do this or do I need to completely reformat my hard drive?
View 4 Replies
View Related
Nov 18, 2010
i have windows xp and federo installed on my system on seperate partition and using grub loader for dual boot. Unfortunately am unable to boot the windows and it hangs with the blue screen and with safe mode it stops at mup.sys and doesnt proceed further.I tried booting with a windows xp CD but it looks like it is unable to recognize the disk even if i say boot with a CD in BIOS settings. Does anybody knows how to make the CD recognizable so that i can go into the windows repair mode.
View 9 Replies
View Related
