If I would like to update my kernel to linux 2.6.34 on my asus eee 1001px laptop. How can I do that in the easiest way? I already downloaded the kernel from kernel.org.
View 7 RepliesI have problems installing Ubuntu Netbook Edition (ubuntu-10.10-netbook-i386.iso)on Asus eeepc 1001PX. code...
I have tried both Universal-USB-Installer-1.8.3.3.exe and the Ubuntu start up disk creator to prepare my USB-stick.
I have earlier installed the Ubuntu desktop 10.10 on the same machine with the same method without problems.
I recently bought a used Asus eee 1001PX. It came installed with some spyware called windows which I replaced with jessie. Everything works great but one thing. When I plug in headphones I get no sound in the headphones. If I have some audio running and plug them in while it's playing it doesn't cut the audio from the built in speakers off like it should do. If I start and look at Output Devices in pauvcontrol it seems like it at least recognizes that I have headphones inserted.
I didn't have a chance to test if the physical audio jack was broken while it had Windows running on it but assuming that it's not physically broken, what might be wrong? I know very little about audio, alsa, pulse and that kind of stuff so I hardly know even where to start.
Some info:
Code: Select alllspci -v
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 8437
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
[Code] ....
Just bought a netbook, ASUS Eee PC 1001PX, and got rid of the crappy XP pre-installed. first i put netbook remix on it, and tried many downloads and ndiswrapper to fix the wireless problem. then i went ahead and put another form of ubuntu on it thinking it might have the right drivers need to use the built-in wireless card, nothing. i dl all updates and bug fixes. i went to atheros to download the only driver they have for linux in the AR8132 class but still not helping. although i am not sure if i even installed. once dl it only extracted itself. i couldnt figure out how to run. if someone has this type of netbook it would be awesome. everything works on it except wireless and headphone jack. i know its just cosmetics but it would be nice if all hardware worked.
View 1 Replies View RelatedBefore 2.6.35-23 released this packages is present in the system:
i A linux-headers-2.6.35-22
i A linux-headers-2.6.35-22-generic
i A linux-image-2.6.35-22-generic
But after automatic update to 2.6.35-23 updater install just linux-image-2.6.35-23-generic without headers. In result kernel modules of nVidia driver not compiled and next boot X server can not start.
Now I can install 2.6.35-24 image and headers by hands, but how to explain updater not forget to update headers next time and why this problem occurs?
Bugreport: [URL]
I used this laptop since 8.4. When first 10.10 beta arrived I decided to upgrade as usual. all seemed to go well. At reboot the computer was hanging after grub, with a blinking cursor on top left. Then was turning off and had getting into a weird hung mode. Was not possible to start it over. The only solution was unplug, take battery off and wait for a minute. Now with the official 10.10 I decided to install it over. But the live CD start right after the first screen. Again with the blinking cursor and angs the machine again. Windows works perfectly as well as all Ubuntu, including 10.4
View 9 Replies View RelatedAfter upgrading to Maverick I found that lsusb command would hang or omit any device I plugged in (flash drive or portable hard disk)
So I did
dpkg -i /var/cache/apt/archives/*usb*
and
dpkg -i /var/cache/apt/archives/*udev*
using packages from a lucid install I had on another laptop which didn't have the USB problem.Now everything is fine. Maverick has some problem with USB.
I have installed it in multiple machines (servers, desktops, laptops)I have even installed 10.04 beta in several laptops for educational purposes without a single crash. But 10.04 crashes in laptop ASUS X50GL with processor Intel Core 2 Duo T5800.In fresh installation, it hangs always, in ANY 10.04 version, beta or stable, 32 or 64 bit, also from iso image in CD or in usb stick,I have tried all possibilities!Therefore, clever enough, I though let's do it in an indirect way: let's install the 8.04 distro (it works) and later on I will upgrade to 10.04. So I just did.Everything was fine (also the upgrade, without a single warning) until final reboot after upgrade to 10.04.hanged at boot!. There is incompatibility between 10.04 and this firmware, clearly. Unfortunately, 10.04 is not yet stable, I guess.I took a picture of the screen which I attach.
View 4 Replies View RelatedI'm trying to install from a USB drive. I followed the instructions given on an Ubuntu website, only to get the following output when booting from the drive:
SYSLINUX 3.86 2010-04-01 EBIOS Copyright (C) 1994-2010 H. Peter Anvin et al No DEFAULT or UI configuration directive found!
I have PC with motherbord P5KPL-AM (latest ver. BIOS), and i want installation CentOS 5.2.But can't screen attaching....
View 5 Replies View RelatedI had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
I've tried to use the GUI tool for update system in Fedora 10. It listed all of the available updates successfully, but it have not any response when i click the 'Update System' button~
View 2 Replies View Relatedi ordered an AsuS Eee PC 1215T netbook off of Newegg:[URL].. i was confused and surprised to discover it didn't have an operating system, only the Express Gate Cloud. it was advertised as running on windows 7, but it's not installed. i called the ASUS tech support not once, but TWICE and they didn't know diddly squat. would anyone be able to walk me through how to install linux on it? the express cloud is a very basis system. there isn't a "my computer" function so i don't know how i would go about installing anything on it. from what i understand this little netbook has great potential, i just don't know how to harness it.
View 5 Replies View Relatedi upgraded my kernel to the latest version that being linux-image-2.6.31-19 and now when i start my linux box i get the grub shell. this problem happend once before but i only had to run the command: sudo update-grub2 and everything turned back normal. now even though i run the command everytime i restart my linux i get the grub shell.
Firstly my gdesklets have gone, and if I try to run gdesklets then I get a blank window in the top left corner, followed by another blank window in the centre which disappears, then the first one fades to gray.
Secondly, clicking the 'running man' to exit just closes both gnome panels.
Ubuntu 8.04 (2.6.24-25)I know 8.04 is pretty old now, and I should probably start over, but it was all fine until this latest update.
9.04 this morning updated my kernel to I believe it is 2.6.28.18 and upon the reboot I had no desktop. It booted wanting to go into low graphics.
So I drop to shell and stop the gdm and try to run the latest nvidia run file I have and it hangs saying I have a x server running.
Otherwise I am needing assistance with getting my desktop back! I can boot into an older kernel and if need be I would like to roll back that latest update this morning, but once again I am forgetting the command line for that.
(after i update packages, it says error, and here's whats in the details tab)
Preconfiguring packages ...
(Reading database ... 197969 files and directories currently installed.)
Preparing to replace flashplugin-installer 10.3.181.34ubuntu0.11.04.1 (using .../flashplugin-installer_10.3.181.34ubuntu0.11.04.1_i386.deb) ...
code....
How to fix This? i haven't messed with Ubuntu much...Why am i getting an error about a kernel update?
It's taken a lot of work, but I have figured out over thecourse of many many fresh installs over the past few days that the kernel updatefrom the update manager in ununtu is breaking my system. This is both for the -22 and -27 updates.Is anyone else having problems with these and/or is there a fix?
View 9 Replies View RelatedAfter last kernel update (2.6.31.8) when I try to connect to access-point my system freeze.
I use realtek network card (rt2860sta module).
Last I upgraded one of our cent 5 boxes which is running kvm with a mix of centos and windows VMs.After the update performance just tanked on the XP guest, but the others (including other windows VMs) are just fine.I checked with our good friend google and didn't really get any help there.We're hoping to NOT have to rebuild the XP guest, so I thought I'd check in here first.
This is CentOS release 5.5 (Final) with kernel
2.6.18-194.32.1.el5 #1 SMP (64bit)
I have a problem with the kernel update to 2.6.34.6. Up until 2.6.33.x my system boots fine, but with this update the boot stops at the moment that the mouse cursor should become visible. To resolve the problem, I've gone back to 2.6.33.x and removed the 2.6.34 kernel but I wonder what happens with the next kernel update.
Anyone else having this problem?
I'm new to Ubuntu and have a problem with my built in cam my computer is an ASUS L58LE cam is usb 2 uvc 1.3 webcam (/dev/video)
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 064e:a116 Suyin Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I have an Asus N82J and I don't have sound? Where I can start?
View 9 Replies View RelatedI upgraded from 10.10 to 11.04 and when i try to check for updates in the update manager it says:
W:Failed to fetch http://ppa.launchpad.net/and471/kaza...source/Sources 404 Not Found
, W:Failed to fetch http://ppa.launchpad.net/and471/kaza...amd64/Packages 404 Not Found
[Code].....
I have an Asus UL80vt laptop. This laptop has an integrated (Intel) as well as a discrete (Nvidia 210m) graphics card.
I want to use the nvidia proprietary drivers because from what I understand, it's the easiest way to set up dual monitors (I have an external monitor). I installed the latest nvidia driver: NVIDIA-Linux-x86-190.53. When I try to run the NVidia X Server Settings GUI, it tells me that "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. "
I checked out my xorg.conf and changed the device driver to 'nvidia' instead of 'nv'. Curiously, when I run nvidia-xconfig, it changes the intel device to 'nvidia' which is a problem. So i skipped running that and just stuck with my xorg.conf. When I run startx, I get a message saying "failed to initialize the NVIDIA graphics device PCI:1:0:0".
I've combed through multiple forums which state different kinds of solutions and I've tried different kernel options such as 'vmalloc=512m' or 'noapic' to no avail.
P.S. I've attached my xorg.conf file
I run an update of ubuntu 9.10 on my laptop and now my mpi programs do not work anymore... The error is
[florian-laptop:02935] [[INVALID],INVALID] ORTE_ERROR_LOG: A system-required executable either could not be found or was not executable by this user in file ../../../../../../orte/mca/ess/singleton/ess_singleton_module.c at line 269 [florian-laptop:02935] [[INVALID],INVALID] ORTE_ERROR_LOG: A system-required executable either could not be found or was not executable by this user in file ../../../../../
[Code]...
I have ASUS Laptop A6Rseries was running XP untill I installed Linux 9.10. Now i am having problem connecting to my wireless network. I am using Belkin router what works fine with XP, Vista and Windovs 7. Here is some information what I found
lspci
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
[code]....
There are currently two options for nVidia drivers in Lucid Lynx, 173, and current. With the video card in my laptop, 9650m GT, the 173 drivers work but Docky is painfully, unusably slow. With the "current" drivers, Docky is fine but I get progressively worse and worse static-type lines across my screen and eventually it the machine restarts itself. I've tried installing drivers manually but they won't compile against the kernel.
Before installing Lucid, I had 9.04 Jaunty installed, and Docky (at the time still merged with gnome-do) worked without a hitch. I ran into this error first when I installed 9.10 and decided to go back to 9.04, hoping that it would be fixed. I can't remember which version of the nVidia drivers I was using in Jaunty, but is there any way to go back to those drivers in Lucid?
I have a 6 month old Acer (sorry not Asus as per the heading) Aspire laptop. I downloaded Ubuntu and cannot connect via wireless. It works fine via ethernet. Having spent several hour reading this forum, other web pages and the help file, I actually still have not got a clue either as to what the actual problem is or how to begin solving it. Is there a simple answer? If not, I'll go back to windows 7 as Ubuntu seems anything but the promises made.
View 1 Replies View RelatedI have a asus g50v laptop with a built in webcam and microphone running ubuntu 10.04 32 bit and its not detecting the webcam / microphone
View 12 Replies View Related