Ubuntu Multimedia :: Newer NVidia Drivers Won't Work With Asus Laptop
May 10, 2010
There are currently two options for nVidia drivers in Lucid Lynx, 173, and current. With the video card in my laptop, 9650m GT, the 173 drivers work but Docky is painfully, unusably slow. With the "current" drivers, Docky is fine but I get progressively worse and worse static-type lines across my screen and eventually it the machine restarts itself. I've tried installing drivers manually but they won't compile against the kernel.
Before installing Lucid, I had 9.04 Jaunty installed, and Docky (at the time still merged with gnome-do) worked without a hitch. I ran into this error first when I installed 9.10 and decided to go back to 9.04, hoping that it would be fixed. I can't remember which version of the nVidia drivers I was using in Jaunty, but is there any way to go back to those drivers in Lucid?
View 2 Replies
ADVERTISEMENT
Mar 7, 2010
I have an Asus UL80vt laptop. This laptop has an integrated (Intel) as well as a discrete (Nvidia 210m) graphics card.
I want to use the nvidia proprietary drivers because from what I understand, it's the easiest way to set up dual monitors (I have an external monitor). I installed the latest nvidia driver: NVIDIA-Linux-x86-190.53. When I try to run the NVidia X Server Settings GUI, it tells me that "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. "
I checked out my xorg.conf and changed the device driver to 'nvidia' instead of 'nv'. Curiously, when I run nvidia-xconfig, it changes the intel device to 'nvidia' which is a problem. So i skipped running that and just stuck with my xorg.conf. When I run startx, I get a message saying "failed to initialize the NVIDIA graphics device PCI:1:0:0".
I've combed through multiple forums which state different kinds of solutions and I've tried different kernel options such as 'vmalloc=512m' or 'noapic' to no avail.
P.S. I've attached my xorg.conf file
View 4 Replies
View Related
Jul 7, 2011
I was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686
[Code]...
View 4 Replies
View Related
Jan 11, 2011
Last night I was playing around with my system trying to install newer ATI drivers for my ATI HD 5770 on Ubuntu 10.10 x64. In my ignorance I downloaded the latest package from the ATI website and installed them directly over the drivers already running (...which were installed through the restricted software application). This caused a noticeable graphical slow down.
To correct my bad driver install I removed the downloaded package using the uninstall .sh found within ATI's wiki. However, the video performance did not improve. I then also removed the fglrx install through the repository, thinking this would revert me back to open source drivers upon reboot; Similar to how Windows reverts back to the OS driver when all 3rd party drivers have been removed.
However, this did not work as planned. On reboot I was presented with a 'no signal found' error with my monitor after viewing the Ubuntu splash screen (which does still display, oddly). After which I rebooted and attempted attempted a low graphical boot through the recovery menu, with the same result. Returning to the recovery console, I attempted to simply reinstall the fglrx driver
[Code]..
I am at wits end. Is there anyway for a newbie such as myself to recover from this double driver install/purge/etc? If not, is there a way to re-install the Ubuntu O/S files, but leave my installed programs/config files in place? While I know I can boot to a live CD to backup my content and reformat, it does take a very long time to move 500Gb of data between two drives.
View 1 Replies
View Related
May 2, 2010
I have installed it in multiple machines (servers, desktops, laptops)I have even installed 10.04 beta in several laptops for educational purposes without a single crash. But 10.04 crashes in laptop ASUS X50GL with processor Intel Core 2 Duo T5800.In fresh installation, it hangs always, in ANY 10.04 version, beta or stable, 32 or 64 bit, also from iso image in CD or in usb stick,I have tried all possibilities!Therefore, clever enough, I though let's do it in an indirect way: let's install the 8.04 distro (it works) and later on I will upgrade to 10.04. So I just did.Everything was fine (also the upgrade, without a single warning) until final reboot after upgrade to 10.04.hanged at boot!. There is incompatibility between 10.04 and this firmware, clearly. Unfortunately, 10.04 is not yet stable, I guess.I took a picture of the screen which I attach.
View 4 Replies
View Related
May 6, 2015
how to make brightness key work ?
BOSSLINUX 5.0 derived from debian
contents of etc/brlapi.key :
==============
b356dfb09008831d4630ad46aa743ebe
contents of etc/acpi/sonybright.sh
====================
#!/bin/bash
# TODO: Change above to /bin/sh
[Code].....
View 8 Replies
View Related
May 20, 2011
i have an asus 1201n, with nvidia proprietary driver, ubuntu 10.10.i have tried to install plymouth-manager, tried to change the theme.i have tried to change screen resolution.nothing works.i really want to change the default theme to the space-sunrise.
View 6 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Sep 8, 2010
I am a real Linux noob lol XD. So sorry if this questions seems a bit easy for some. So here it goes: I want to install NVidia drivers for my laptop and need a compiler to actually install them. I do not have any installed and would like to know how to install gcc, as in the error when i run NVidia driver it says that I need it.
View 9 Replies
View Related
Jun 2, 2010
I'm new to Ubuntu and have a problem with my built in cam my computer is an ASUS L58LE cam is usb 2 uvc 1.3 webcam (/dev/video)
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 064e:a116 Suyin Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
View 2 Replies
View Related
Mar 1, 2011
I have an Asus N82J and I don't have sound? Where I can start?
View 9 Replies
View Related
Nov 15, 2010
I have a thin client HP t5730 with a ATI x1250 ()Running Ubuntu 10.04 everything works fine, the graphic card is recognized with the open source drivers and everything looks good. I am planning on installing XBMC Live, which is built upon Ubuntu 9.10, and no matter what i do, it never detects the card. I have tried everything, installing the appropriate ATI drivers, installing EvnyNG and the list goes on. Aticonfig still shows: no supported adapters. My question is, is it possible to upgrade to the newer open source drivers that Ubuntu comes with or does anyone have any other idea?
View 1 Replies
View Related
Sep 21, 2009
I'm trying to get the NVIDIA drivers to work with xen but i still get it bombing out although I export IGNORE_XEN_PRESENCE=1. the error relates to some variables in nv.c nor being declared. I compiling against 2.6.18-164.el5xen with the NVIDIA-Linux-x86-185.18.36-pkg1.run driver.
View 2 Replies
View Related
Jul 24, 2010
I have Ubuntu 10.04 installed. Everything works fine until I enable the Nvidia drivers. When I enable the drivers and reboot the top and bottom panel stop displaying. If I issue command 'pkill gnome-panel' it all comes up and works correctly.
lspci output shows:
VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4400] (rev a2)
I am at a loss here as I am somewhat new to Ubuntu. Where to start looking for the problem? I've thought about setting up a startup script to run 'pkill gnome-panel' after I login, but that doesn't really fix the core of the problem.
View 7 Replies
View Related
Jun 9, 2011
After using Arch Linux for a while, I tried Ubuntu 11.04 again. Most of it was a pleasant surprise, except for the nvidia drivers. I currently have the nouveau drivers, but when I activate the nvidia drivers and reboot, it's installed but not in use. I figured I should run nvidia-xconfig (as suggested by nvidia-settings) but that makes my computer boot into a tty. Removing the /etc/X11/xorg.conf file makes it boot in nouveau again.
How do I install the Nvidia drivers? Ive tried the drivers from nvidia.com too, with the same results. I really want to be able to play my games, and nouveau just isnt going to cut it.
View 9 Replies
View Related
Jul 6, 2010
I am running kernel 2.6.32-23-generic-pae and since updating nvidia drivers do not work. I go into hardware drivers and activate but I get dropping to low resolution desktop or VGA not supported.
View 2 Replies
View Related
Jun 17, 2011
Today I finally could install Fedora 15 i686 in my now aging (2005) desktop computer (although I will always think of it as my "new machine", as long as I don't assemble a new one for me):
AMD Sempron 3100+ (1.8GHz)
1GB DDR400
120GB HDD
NVIDIA GeForce FX5200 (128MB)
After I installed F15 my initialpression was that it worked really good on that hardware: everything went fine with GNOME 3 for example,except for some lags in graphics rendering, which I thought would be solved after the graphics card's full power were unleashed with the proprietary NVIDIA driver.For starters I am not sure which Nvidia driver is right for my card (Nvidia 173.X or the regularvidia).I managed to get "working" the 173.X driver but the desktop is even less responsive to begin with, and there appears to be a lot of activity on the hard disk side.So, my question is, which could be causing the performance loss?
A. The "small" RAM.
B. The vintage graphics card.
C. Some problem in the hard drive.
D. A known bug.
View 3 Replies
View Related
Oct 18, 2010
I just got a Xonar D1 (chipset CMI 8788 ).
It partially works but I got a couple of issues (using 10.04 x86-64). I use it with a Stereo headphones and a mic.
1) It only outputs in 7.1/5.1 mode and only on the left headphone. If I reselect 7.1/5.1 while an audio stream is playing then I get stereo back. I've checked with Ubuntu 10.10 live CD and apparently the left channel is mapped to front, while the right is mapped to sub-woofer. How can I fix this?
2) The mic doesn't work. When I select the Xonar D1, I can choose between Analog Input, Analog Line In and Analog Microphone. When I switch between those I can hear a click coming from my pc, as if something HW is switching. I tried playing around with alsamixer but it doesn't work. Any idea how to make the mic work?
View 2 Replies
View Related
Oct 27, 2010
With Ubuntu 10.10 I cannot get a proprietary driver to work with the nVidia NV18 GeFroce4MX video on my PC. I worked fine on 10.04 LTS. Numerous posts on Ubunutu forums, but none seem to work for my PC.Only thing that seems to work in part is to use xorg 1.9 driver. However, something is not right as mouse cursor has to be positioned about one line above where you would normally click to get things to work.
View 11 Replies
View Related
Jan 10, 2011
I has just got Asus N53JN, i have tried to installed both Ubuntu 10.04 and 10.10 but the speaker not work.lspci | grep Audio00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Intel [HDA Intel], device 0: ALC259 Analog [ALC259 Analog]
[code]....
View 1 Replies
View Related
May 26, 2011
I just installed Debian on my new VAIO VPCS13. It seems to be working for the most part, except it does not recognize my Synaptics touchpad at all.
I've had Ubuntu installed on this computer before and the mousepad worked fine. This being Debian on a new-generation computer, it makes me think that Debian just probably hasn't released the update yet.
View 5 Replies
View Related
Apr 11, 2010
The PC is a Toshiba laptop model# x205-s9359 running 11.2, KDE 4.3.5. Its video card is an nVidia 8700 GT. For two years now I've been plagued by random flashes, flickers and even missing scan lines on my screen when I use the nVidia drivers (up to and including 195.36.15), so lately I've been using the nv drivers. I miss the effects, etc. but I can live with that. At least I can get my work done, even if the display isn't as fancy as I'd like.
- When I run the nv drivers I can't suspend the PC to RAM or Disk. This means a lot of wasted time waiting for the machine to shut down and reboot every time I leave my desk for any length of time. If I try to suspend to RAM the only thing that happens is that the network connection disconnects then reconnects immediately. Here's the log file....
- If I try to suspend to Disk the PC appears to suspend as expected, but when it resumes it hangs before restarting X, and there's no keyboard or power button response. I have to use alt-prtsc-reisub to reboot. When the reboot is complete the screen shows all the windows, etc that were present before the suspend. Here's that log file....
-When I run the nVidia drivers the suspend/resume functions work perfectly, but I have to put up with all the problems described above. Here's the log file for Suspend to RAM with nVidia, and here's the one for Suspend to Disk.
I've spent hours searching for clues in these forums, on the openSUSE.org site in general, at KDE.org and with Google and I'm sorry to say that most of I've found is horribly out of date, and/or it's way over my head. or (worst of all) not even dated, so I've no idea whether it's current info relevant to my situation or so out of date that I might do real harm if I were to trust it. (RANT: Is it too hard to put a date on an article?... end of RANT) I'd be quite content to use the nv drivers if I could solve the power management issues, but I'd be equally happy to solve the flickering etc. with nVidia drivers.
View 2 Replies
View Related
Jan 7, 2011
I just installed Maverick on an Asus Seashell 1215T netbook with an AMD/ATI chipset. The sound output is working fine (with the exception that I have to manually set output to either speakers or headphones rather than just plugging in headphones), but neither the internal microphone nor external microphones plugged in through the mic jack work. I do have the sound device set to the internal sound (rather than HDMI) and the volume level set appropriately. Apparently neither microphone is being recognized. Any ideas on what could be wrong?Here is the relevant section from lspci -v:
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 841c
Flags: bus master, slow devsel, latency 64, IRQ 16
[code]....
View 9 Replies
View Related
May 2, 2010
I just upgraded to lynx but my nvidia drivers only say "173" and "recommended" as the two options. no idea which version the "recommended" one is but that's what is enabled. I did an update but still it does not show the 195 drivers that I thought I read were shipping with lucid.
View 3 Replies
View Related
Jul 15, 2010
the url to the nividia drivers for 11.3. They are not yet in the community repos.
View 9 Replies
View Related
Feb 4, 2010
I have a laptop and desktop both with basic installations of 9.10 (Karmic). And, they are networked with a Mac running OS X 10.6.2. Screen sharing simply worked right from the beginning, to and from the Mac, and of course to and from both Ubuntu installs.
Except there was no feedback from one Ubuntu desktop screen being shared. Mouse clicks, mouse movements, and keyboard presses all seemed to have their correct effects. It was just that the results were not fed back to the remote screen.
During troubleshooting, I de-activated (removed) the nVidia accelerated graphics driver (version 185) that had been installed with 9.10 (Karmic). Then screen sharing started to work with the proper feedback to the remote screen.
I tried the pre-upgrade nVidia driver (version 173) and again no feedback from the screen being shared. De-activate the driver and again screen sharing started to work with feedback.
The bottom line seems to be no nVidia proprietary drivers if I want remote screen sharing to work. But this desktop is primarily used as a HTPC with a HDTV monitor. No games. No 3D. Screen sharing is probably more important, but essentially what am I giving up in graphics capabilities by not using those nVidia drivers?
View 2 Replies
View Related
Mar 6, 2010
BlizzPlanet reports that people are seeing their nvidia graphics cards overheat when running the Windows 196.75 driver and playing 3D games. I have to wonder whether I fell afoul of this issue. A week ago I installed the 195.36 nVidia proprietary Linux driver on my Karmic Koala system, after adding the PPD nvidia-vdpau repository to my sources.list. I restarted so the new driver would take effect... and was surprised to see the graphics chip temperature soar to over 130 degrees Celsius. It fried itself. When I opened up the case, I checked the card's fan, and it spun freely, and I'd not heard any noise of the sort that accompanies a dying fan. I'm sticking with 190.53 for now. Has anyone else seen overheating difficulties with the 195.36 driver?
View 2 Replies
View Related
Jul 9, 2010
OK, I'm using Ubuntu 10.04 and since upgrading to the 256.35 drivers from the ubuntu-x-swat/x-updates ppa the ambiance and radiance themes have gone funny. For example the scroll bars and buttons are now very white and when hovering over the time it goes a very bright colour. If I return to the 195 drivers the problem goes, but the 256 drivers have better video vdpau performance. The problem occurs regardless of whether compiz is enabled. The login screen is also affected. My gfx card is an 8600m gs.
View 9 Replies
View Related
Aug 27, 2010
10.04 64-bit
+
NVIDIA GeForce 8500GT 256MB
So I kind of had ubuntu working, but then I tried updating to the newer nvidia drivers and I broke it. I had to uninstall/purge nvidia so as to get ubuntu past the black screen/no signal to monitor...
I had been using a "Broadcom B43 wireless driver" which used fwcutter to extract firmware from various source files. I have never been able to get this install working with nvidia drivers and am about ready to try anything (including yet another reinstall).
**Nvidia drivers 96, 173, & current cause my system to freeze, lock up, reboot, fail to boot, etc. You name it and it's happened.**
I tried using synaptic, jockey and the terminal to install nvidia drivers. Then I tried adding the swat ppa and installing through System-Admin-Hardware Drivers to no avail.
Every time I start my PC it displays this window.
And when I open Hardware drivers this is what appears.
View 8 Replies
View Related
Sep 16, 2010
I executed the following and after a restart I have no signal in my monitor:
Code:
sudo service gdm stop
sudo apt-get remove --purge nvidia*
How can I fix this?
View 1 Replies
View Related
