Ubuntu Installation :: Update / Getting An Error About A Kernel Update?
Sep 1, 2011
(after i update packages, it says error, and here's whats in the details tab)
Preconfiguring packages ...
(Reading database ... 197969 files and directories currently installed.)
Preparing to replace flashplugin-installer 10.3.181.34ubuntu0.11.04.1 (using .../flashplugin-installer_10.3.181.34ubuntu0.11.04.1_i386.deb) ...
code....
How to fix This? i haven't messed with Ubuntu much...Why am i getting an error about a kernel update?
View 4 Replies
ADVERTISEMENT
Mar 24, 2011
I have a new acer machine which runs fine on 10.10 mythbuntu desktop livecd. Install seemed fine.
Then I ran an update and on reboot I get a kernel panic error. Research on this reveals it as a very deep subject which can consume many hours, so I opted to reinstall.
This time with ubuntu 10.10. I've tried different CDs, liveusb. Same errors.
So, the question is this - where do I concentrate my efforts - somewhere ubuntu doesn't like this machine, or grub. Does a reinstall overwrite the grub install too? Or do I have a bogus grub install I need to purge before I will get anywhere.
View 5 Replies
View Related
Oct 1, 2010
I am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.
View 1 Replies
View Related
May 13, 2011
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies
View Related
Mar 13, 2011
after initating the update and i enter my pass word, update stops and an error box comes up stating that it is unable to update because there is more than one synaptic manager running, i have restarted and get the same results, and to my knowledge there is nothing else running in the background.
View 3 Replies
View Related
Dec 1, 2010
Ran the updater, went to boot to Win7 to use Photoshop and realized that the grub menu was gone. Ubuntu boots by default now. I tried running "sudo update-grub" at a virtual terminal and while it listed the various linux kernels ok, it then got caught in a loop spitting out some crazy looking errors. I rebooted and Ubuntu came up fine. I tried running "sudo update-grub" again from the gnome terminal and it hangs the whole computer for a few minutes and finally gives me this:
[Code]...
View 1 Replies
View Related
Jan 30, 2011
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
View 7 Replies
View Related
Aug 6, 2010
After upgrading to a new kernel (via an official update from Ubuntu) today, my computer will no longer boot properly. After rebooting to apply the update, my system ran its scheduled disk check (I think it's set to every 30 mounts or something like that). Errors were found and, as the message said, I "[Pressed] F to attempt to fix the Errors." They were fixed. Re-checking now in Knoppix reveals the file system is clean and it is, in fact, mounted as I post. After leaving the computer alone for a while to check, it seems that it had rebooted without my intervention. It's a laptop on AC power and with a full battery so I ruled out a power interruption, but the screen says:
Code:
Booting from [my HD's UUID]...
Starting up...
Uncompression Error
--System Halted
I figure "Ok, new kernel has an issue, I'll boot from one of the backups." I boot from the two previous versions (2.6.32-23 and 2.6.32-22) and both error out with a Kernel Panic and complains:
Code:
Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0).So now I'm stuck with the prospect of backing up all of my data (a lot) and returning my computer to factory settings (Ubuntu 8.10) and re-upgrading or re-installing from scratch losing some of the Dell-supplied software.
View 4 Replies
View Related
Feb 5, 2010
9.04 this morning updated my kernel to I believe it is 2.6.28.18 and upon the reboot I had no desktop. It booted wanting to go into low graphics.
So I drop to shell and stop the gdm and try to run the latest nvidia run file I have and it hangs saying I have a x server running.
Otherwise I am needing assistance with getting my desktop back! I can boot into an older kernel and if need be I would like to roll back that latest update this morning, but once again I am forgetting the command line for that.
View 5 Replies
View Related
Feb 5, 2010
I received an update to my kernel through the update manager (updated from ****.32.14 to ****.32.19, or something like that) but grub still shows the old kernel and not the updated one. Was this not a full kernel update and only a patch or do I have to do something to use the new kernel? I'm new bear with me if this doesn't make any sense.
View 9 Replies
View Related
Aug 4, 2010
I ran the update through yum (replicated results twice) and whenever I boot to the new kernel it either freezes on the F logo or screen goes black right after f logo. No commands work whatsoever (tried em all). I can boot to an older kernel (2.6.33.3-85.fc13.x86_64). the ones that fail are: 2.6.33.6-147.fc13.x86_64 and 2.6.33.6-147.2.4.fc13.x86_64.
The Fedora error system gave me a bug report I submitted, here's what I got:
Package: kernel
Latest Crash:Tue 03 Aug 2010 09:46:33 PM
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 00000000000005b8
Bug Reports:Kernel oops report was uploaded
View 14 Replies
View Related
Sep 26, 2010
After the lastest update 11.2 also suffers from the problem already reported here for 11.3. I am lucky to have two linux partitions and was actualy able to boot into the second partition. From this second system I could repair this or at least a quick-n-dirty fallback to be able to boot.
1. Copied the 2.6.21.12-0.2 version for initrd and vmlinuz from /boot to /first_partition/boot
2. Copied the /first_partition/boot/grub/menu.lst.old to /first_partition/boot/grub/menu.lst to reset to the old menu.
After boot the system could start but modules were not loaded.
3. copied /lib/modules/2.6.31.12-0.2-desktop from the second partition to the first.
4. The same for /usr/src/linux-2.6.31.12-0.2*
Now my system will boot and start modules such as network and sound. Still, was this correct? I don't know for sure if there are some issues that I haven't discovered yet. And obviously, what will happen with future updates (either kernel or other)?
View 4 Replies
View Related
Oct 25, 2010
I have checked the known issues and the sticky post, it does not seem to be related. I have Ubuntu as my host OS and I want to run Windows as a guest.
Now, Here is the error:
Quote:
Kernel driver not installed (rc=-190
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. I have done the obvious:
Quote:
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install dkms
sudo /etc/init.d/vboxdrv setup
I still have the same error. I just updated from Ubuntu 10.04 to 10.10, then I was prompted by virtual box to update to the newest version, then this happened.
View 2 Replies
View Related
May 25, 2011
I updated the Ubuntu version 10.04.1. After updating the program it tells to restart the system. After restarting the system the following message appears:
error: can not read the linux header
error: you need to load the kernel first
View 4 Replies
View Related
Jul 26, 2011
On two Centos5 servers, yum gives a segmentation fault error when trying 'yum update' or 'yum check-update' after running 'yum clean' :
[Code]....
The error is the same for the other computer except while attempting to update the rpmforge repository. Nothing has really changed on the servers in some time and 'yum update' worked fine on each yesterday and I have no idea why they would both suddenly fail!
View 3 Replies
View Related
Jul 10, 2010
Googled this and found the same problem mentioned in the yum site:
[root@plouton ~]# yum update kernel
Loaded plugins: refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.6-147.fc13 set to be installed
--> Finished Dependency Resolution
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.4-95.fc13 set to be erased
--> Finished Dependency Resolution
Dependencies Resolved
View 4 Replies
View Related
Oct 1, 2009
For the past few days, the automatic GUI update has been crashing, complaining of a "Transaction error."
Here is the output that pops up in a separate window:
Code:
I tried the following:
Code:
And got the following (similar) output:
Code:
I very rarely use xfce and I don't quite know what exo is, but I'd like to fix this problem if it's not too involved.
View 3 Replies
View Related
Feb 26, 2010
Code:could not add package update for poppler-data-0.4.0-1.fc12(noarch)updates: poppler-data-0.4.0-1.fc12.noarch.
View 3 Replies
View Related
Jul 14, 2011
I have a very strange problem; when trying to apt-get update or aptitude update I get time out errors. At first it was resolving ipv6 adresses:
Cannot initiate the connection to ftp.litnet.lt:80 (2001:778::87). - connect (101: Network is unreachable) [IP: 2001:778::87 80] Err [URL] Cannot initiate the connection to security.debian.org:80 (2001:a78:5:1:216:35ff:fe7f:6ceb). - connect (101: Network is
unreachable) [IP: 2001:a78:5:1:216:35ff:fe7f:6ceb 80] As my host does not have normal ipv6 support, i just tried to disable ipv6: echo net.ipv6.conf.all.disable_ipv6=1 > /etc/sysctl.d/disableipv6.conf
[Code]....
View 2 Replies
View Related
Jul 13, 2010
I have a error when i want to update my system via YUMI execute the next command.sh@ yum -y updateYou could try using --skip-broken to work around the problemYou could try running:package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigestThe program package-cleanup is found in the yum-utils package.
View 5 Replies
View Related
Mar 5, 2010
It seems that updating the Kernel breaks my installation. I've tried it twice, and both times it disabled my gui desktop. I'm posting this with links2 in my terminal. The terminal works perfectly.
This is really annoying, as I can't even use my computer. What do you think is the problem?
View 6 Replies
View Related
Mar 8, 2010
Running Karmic on my laptop, I get very occasional kernel panics (suspect it has something to do with the Broadcom WiFi because it only seems to happen with heavy network traffic or HDD access), but just my lucky, this time it Panic'd on me during my recent update -> linux-kernel 2.6.31-20. My system still 'works', but I get the following when doing any other updates, now:
Code:
sudo dpkg --configure -a
[sudo] password for tango:
Setting up linux-image-2.6.31-20-generic (2.6.31-20.57) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing linux-image-2.6.31-20-generic (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of linux-image-generic:
linux-image-generic depends on linux-image-2.6.31-20-generic; however:
Package linux-image-2.6.31-20-generic is not configured yet.
dpkg: error processing linux-image-generic (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of linux-generic:
linux-generic depends on linux-image-generic (= 2.6.31.20.33); however:
Package linux-image-generic is not configured yet.
dpkg: error processing linux-generic (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-2.6.31-20-generic
linux-image-generic
linux-generic
Now I cannot seem to get rid of that, and of course, I am stuck in the prior version. Granted everything 'works' - but it bothers me. What's the best way to go about tracking down and hashing out a problem like this?
View 4 Replies
View Related
May 5, 2010
I have just run an upgrade and noticed Kernel update 2.6.32-22 for lucid. Anything new in that? Anyone have any details?
View 9 Replies
View Related
Aug 17, 2010
I've a self compiled kernel. How I can hold this version and deactivate the kernel-updates?
View 4 Replies
View Related
Feb 2, 2011
When trying to clean up old kernels I accidentally deleted the current kernel (2.6.35-24). I then had problems when I reinstalled and found that I could only boot into command line mode. I was able to fix this problem but have since installed the latest kernel release (2.6.35-25) and now have the same problem as before. Of course, I could do what I did before but I guess this is going to occur whenever I upgrade in future.
View 4 Replies
View Related
Mar 13, 2011
Update to latest kernel 2.6.38?
Code:
paneas@paneasbox:~$ uname -a
Linux paneasbox 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux
I want to update my kernel to the latest version from kernel.org, which is the mainline 2.6.38-rc8 .
EDIT: I found this guide [URL].. and I will give it a try
View 1 Replies
View Related
May 15, 2011
After upgrading Maverick (perfect!) to Natty, I was unable to boot into anything. (kernel 2.6.38). However, through much PITA, I was able to boot into an older kernel. (2.6.35). I completely removed 2.6.38, rebooted, reinstalled it and ran update-grub. However, 2.6.38 is no longer available no matter how many times I run update-grub, and the only option left is 2.6.35. In my humble opinion, the Natty upgrade experience is rubbish. (blank screen, total PC hangs, boots into a blank screen with only a blinking cursor, NVIDIA official driver not working, bootable only into older kernels etc.)
View 7 Replies
View Related
Jun 2, 2011
I tried to update Linux kernel (2.6.39) but after installation procedure PC won't boot into NEW kernel, I get only BLANK screen, but hopefully older kernel works just fine (2.6.38-9), how to fix it, that I can fluently boot into 2.6.39?
View 4 Replies
View Related
Jan 14, 2010
im dual booting ubuntu and win7 (i installed ubuntu using wubi)yesterday i ran the update manager and i noticed it installed a kernel update.since then, whenever i reboot i get the boot loader menu asking me to choose between win7 and ubuntu, but when i choose ubuntu, instead of the regular menu that asked me which kernel version i wanna use i get a command-prompt-like interface with the title:
View 1 Replies
View Related
Jan 31, 2010
I would like to update my Kernel from 2.6.31.14 (from liveCD) to the 2.6.31.17, because of my modem problem (huawei e 169).>UBUNTU 9.10<
I know that I can do it trough synaptic- but the problem is when I restart my pendrive, the kernel want be recognized. I think I have change something in some boot documents- but it looks here everything a little bit different than with HDD install:there is no menu.lst , etc.
View 1 Replies
View Related
