Ubuntu Installation :: USB Devices Won't Automount In 10.04 Lucid?
May 3, 2010
When a USB device is attached to the laptop 10.04 does not automount the device. i.e. the device, be at an external drive, memory stick or iPod does not display with the correct icon on the desktop.
However, if one looks under Places|Computer there they all are with the correct icons. The devices can then be mounted from there.
This issue seems to be related to these other posts: [URL]
This is really disappointing given that 10.04 was promoted on its iPod friendliness!
System: IBM Thinkpad T41; Pentium-M 1.6GHz; 1Gb RAM
View 9 Replies
ADVERTISEMENT
May 11, 2015
There seems to be no documentation on how to automount partitions and USB devices under systemd in Jessie. (Overall, systemd entirely lacks any useful documentation or GUI configuration tools -- all very cryptic and hidden.)
I created custom files to enable automounting. I put them in /etc/systemd/system -- this may not be the right place, but it works.
Kernel note:
This does not work under the old Wheezy kernel linux-image-3.2.0-4.
To automount my Windows partition so I can access its files, I created:
/etc/systemd/system/media-windows.mount
The name of the file must match the mount point -- in this case, /media/windows
My file notes the device and file type, plus an fmask option so all the Windows files don't seem to be executable:
[Unit]
Description = windows mount to /media/windows
[Mount]
What=/dev/sda1
Where=/media/windows
Type=ntfs-3g
Options=fmask=111
[Install]
WantedBy=multi-user.target
The file ownership must be root.root. Apparently it doesn't need to be executable.
After creating, enable with:
sudo systemctl enable media-windows.mount
and it will mount on the next boot.
I read elsewhere that the before running the enable command you should run a start command:
sudo systemctl start media-windows.mount
but that didn't work for me.
View 2 Replies
View Related
Jun 11, 2011
I managed with fstab but at restart came a black screen.I have called an HD '7200' then I reinstalled Fedora. And it does not automount it anymore. I changed fstab and black screen.
View 5 Replies
View Related
Jan 27, 2010
Since I created second user USB devices as PTP camera, flash mass storage automounts always for the new user.
Even the second user is not logged in automount does not work for main user. When I log in as second user (with device plugged in) it is mounted automatically after log in.
What can I do with this problem?
I would like to access devices from each user (not necessarily at the same time).
How can I configure it?
How can I "remount" device to my current user without switching into the second one (it's someones else account)?
View 7 Replies
View Related
May 4, 2011
I have ubuntu 10.04 and am running gnome desktop.Howto disable automount for USB stick devices?
View 1 Replies
View Related
Jun 5, 2010
I don't have an opportunity to check it out now... Does Debian 6 testing mount inserted CDs/Flash-drives automatically like Ubuntu does? Or the only way to mount them after inserting is to use mount command?
View 7 Replies
View Related
Mar 8, 2011
I have squeeze with xfce4 installed. How to disable automount of usb devices under xfce?
View 2 Replies
View Related
Oct 18, 2010
I am looking for info about how works automount process, and i didn't find info about the tollowing ...
I wonder ... how can i do to "config" automount process to put all my usb devices in write-back mode as default ... for example ... what file can i change? ... how to do it ?
And another one ... um... how to say to "automount process" ... to put my usb devices into a "deadline" io scheduler .. for example ... how to set io-scheduler for an automount device ?
View 1 Replies
View Related
May 2, 2010
I cannot force Ubuntu to open my data DVDs upon their insertion. It is present, but it won't automount. Of course, in /etc/fstab are no indications for removabledevices, but this is correct, I think.
View 5 Replies
View Related
May 16, 2010
I see a lot of threads on auto mount NTFS in other versions, is it still that cumbersome in Lucid?
View 5 Replies
View Related
May 22, 2010
I just installed 10.04 from a CD and cannot get music cds to automount. There is no problem with data CDs.
View 4 Replies
View Related
Sep 18, 2010
My external HD where everything I backed up from my previous install will not mount. It shows up in lsusb, but when I do dmesg:
Code:
[20801.408614] usb 1-3: USB disconnect, address 36
[20804.190095] usb 1-3: new high speed USB device using ehci_hcd and address 38
[20804.343675] usb 1-3: string descriptor 0 malformed (err = -61), defaulting to 0x0409
[20804.345100] usb 1-3: configuration #1 chosen from 1 choice
Also of note, my main filesystem is reiserfs, so there isn't a problem of not having reiser installed.
View 2 Replies
View Related
May 10, 2010
I'm probably missing something noobishly obvious here. I recently did a fresh Lucid install on my main desktop box, which had previously been running Karmic. With Lucid I can no longer use fstab in my laptops to automatically mount the desktop's shared media drive. Using the mount command works fine. One laptop is running Karmic, the other is running Hardy.This is the line in fstab on both laptops:
Code:
//192.168.0.123/multimedia /media/multimedia cifs username=x,password=y 0 0
This is unchanged since the desktop was running Karmic, where auto-mounting from the lappys worked just
[code]....
View 9 Replies
View Related
Apr 15, 2011
My Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertently fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia"
Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it.
But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD....
I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble...
I just wanted to use that partition for video editing and now I am locked out of my system!
View 2 Replies
View Related
Oct 11, 2010
Ubuntu 10.04 how stable are the lucid-proposed and lucid-backports options in the software sources settings?
View 4 Replies
View Related
Apr 30, 2010
What's the procedure for updating from Lucid Beta 2 to Lucid LTS? Is it just "apt-get upgrade"? Or would I be better off with a clean install?
View 2 Replies
View Related
May 24, 2010
I have a problem that I can not decide for 2 weeks. Here is what happened: On my laptop, installed just Windows XP. In the past, when I installed the second system, Ubuntu 9.04 or 9.10 (for dual-boot), Ubuntu asked the administrator password for access to just Windows XP partition. I mean, that just Windows XP partitions were visible, but for the entrance (mount) needed a root password.
Now, in Ubuntu 10.04, Windows XP partition mount automatically and Ubuntu does not require the root password. I do not like it very much.
Tell me please, what do the settings at the time of installation of Ubuntu for just Windows XP that the system would be asking root password for just Windows XP partitions? Is this possible? I think - yes. Because in the past the default 9.04 and 9.10 asked for a password.
PS: I must say, as I put Ubuntu and just Windows: 1. Be installed just Windows XP, giving it 20 GB space 100 GB hard drive. </span>The remaining 80 Gigabytes leave out the implications.
[Code]...
View 9 Replies
View Related
May 9, 2010
I recently upgraded from Karmic to Lucid via the Update Manager. I would like to upgrade further by switching from 32 Bit to 64 Bit. I downloaded the Lucid 64 Bit ISO and wrote an install disk. When I reboot the computer with the install disk nothing happens.
View 2 Replies
View Related
May 8, 2010
I just upgraded from 9.10 x64 to 10.04 x64 on my desktop. My Sansa Clip+ (USB mass storage mp3 player with SD card slot) stopped auto mounting. It worked fine in 9.10.
dmesg:
Code:
[ 56.290051] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 56.360222] hub 1-0:1.0: unable to enumerate USB device on port 5
[code]...
View 7 Replies
View Related
Jan 17, 2010
i installed latest ubuntu server 9.10 on my mini itx board which i have 1 4gb IDE disk and 4x2TB sata disks attached no i want those disks to automount on startup is there a way without modifiying fstab? the thing is, i want to expand the storage over time (next hard disks in a few months) and maybe a second mainboard in a year so i need a simple way to mount everything without being to mainboard specific like doing fstab entries
View 2 Replies
View Related
May 23, 2015
I've just upgraded my system and I'm having some issues to boot with the latest kernel (cf: [URL] ....)
Hopefully I can still use the previous kernel (vmlinuz-3.2.0-4-686-pae).
I'd like to watch a movie that is on an NTFS partition.
From gnome-classic, I went in Places->datas (name of my partition) and I get this error message:
Code: Select allFailed to open "/media/mb/datas".
Error when getting information for file '/media/mb/datas': Input/output error.
The result of a df -h gives me:
Code: Select all/dev/sda3 fuseblk 96G 60G 37G 63% /media/mb/datas
mb is the username I'm currently using.
Previously it was only trying to mount the partition (after asking for the root password) in /media/datas
Is it normal that now it tries to mount it only for my current user in another folder?
If I look in the /var/log/messages, I only see this:
May 22 23:53:06 Tieum-Latitude gnome-session[2092]: Thunar: Failed to open "/media/mb/datas": Error when getting information for file '/media/mb/datas': Input/output error
View 3 Replies
View Related
Mar 4, 2010
I am just getting started with Ubuntu and love it so far. It has breathed new life into an old Compaq Presario V2000 and once I get up to speed on it I hope to start running it on all the rest of our machines.
The only major problem I am having is that none of the USB devices I have plugged in are being detected. From what I have seen online I should be getting a notification and should be able to view the devices at Places/Computer but so far, nothing. Googling this problem it appears that individual devices often don't work but I could not find anything on all USB devices not working.
Any ideas as to what I am doing wrong here?
View 1 Replies
View Related
May 2, 2010
Upgraded from 9.04 to 9.10, touchpad on my laptop stopped working, but i had my USB mouse so I upgraded to 10.4. After the reboot, both the USBMouse and touchpad no longer work, rendering my Ubuntu Installation a useless. Luckly I have OpenSuse installed on this laptop as well. I have a Gateway MP6954
View 1 Replies
View Related
May 31, 2010
After upgrading to Lucid 10.4, I find that after booting I can no-longer auto-mount any USB drive when they are plugged in. They simply doesn't appear on the desktop as they did. Swap my PATA drive back to the one with 9.10 still installed on it is well.However, if I have USB drives plugged in before boot, they appears on the desktop, but are not auto-mounted as previously. Also when I click on any drive icon for the first time there is no response. Try again (on any drive) an the devices will all auto-mount revealing their contents in the window that subsequently opens. Everything them seems fine. I can unmount and remount at my leisure with any number of devices.
I do not have the problem of root only access that others have mentioned. I have played with usbmount and pmount as others have suggested, to no avail. They have both been removed.I have the HAL installed as default, and have already ecked media_automount_open for Nautilus on the gconf-editor.Disabling the floppy in the BIOS has not effect and I do not use autologin option.With (say) two USB drives attached, whether the devices are recognised at boot or not after boot,lsusb reveals:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
View 9 Replies
View Related
Jun 15, 2010
I have Virtualbox installed from the Ubuntu repository. As I just found out, I can't access any USB connected devices (printer, scanner). It seems I can get these USB peripherals to work by using a different Virtualbox repository. how to do this without loosing the OS installation that I have already setup in Virtualbox?
View 6 Replies
View Related
Apr 28, 2011
After I managed to crash my Debian on a version upgrade and failed to reinstall it by the netinstall CD I decided to switch to Ubuntu on my (old) fileserver. Unfortunately some of the disks can not be mounted:
[Code]...
View 14 Replies
View Related
Mar 9, 2010
I had XP before, which gave me an error message and crashed. I didn't have the XP CD so I decided to give Linux an error. By what i can find, I have a somewhat unique problem. My USB drives no longer work. They light up green, so they obviously have some power and so on, but there is no response from any devices that you plug in, i.e. mouse, flash drives, etc. Nothing works.
View 1 Replies
View Related
Jun 27, 2011
Other o/s because I plan to turn that machine into a Xen server.
Unfortunately I don't have much exper building computers/ hardware. What I'm wondering is whether the number of devices (like hard drives and optical drives, etc) is a function of what the mobo can support; or, if the bays are there and the cable has enough plugs I can just go for it.Specifically I'm trying to have 3 disks and one optical drive. The machine happens to have been a media center version desktop so it has this like 9 in 1 card reader thing in it but I don't think it uses that flat cable for data transfer anyhow. It looks to be connected differently.
View 9 Replies
View Related
Aug 9, 2011
i installed ubuntu today by installing Wubi and after downloading i rebooted computer and selected ubuntu but i got an error saying 'Try (hd0,0): FAT16: NO WUBILDR' and there was few more but i forgot and at the end it says 'Cannot find GRLDR in all device Press CTRL+ALT+DELETE to restart' it used to work when i had vista.
View 3 Replies
View Related
May 8, 2010
Recently I installed Fedora 12 without any hassles except that the USB devices are not getting detected. I checked with /proc/interrupts and the ehci_hcd module doesn't get any interrupts. Here is my dmesg (done to show only USB related messages) :
Code:
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
[code]....
View 1 Replies
View Related
