I don't have an opportunity to check it out now... Does Debian 6 testing mount inserted CDs/Flash-drives automatically like Ubuntu does? Or the only way to mount them after inserting is to use mount command?
View 7 RepliesIt seems as though k3b will only recognise my burners when the system first boots for about 5 minutes. Once time is up k3b will not see my burners.. I tried burning a disk using k3b soon as I booted and it lost the drives mid burn.
The drives are ide and I've read about the drivers for cdrdao possibly not being correct but when I check to see if cdrdao sees the drives using command line it does give me both drives. So I assume that is working properly. When a cd is inserted it doesn't automount the cd either. Am I having issues with HAL? or is k3b just that flaky? ISB thumb drives mount fine..I have checked the fstab and there is no mention of cdrom mount points. IS this normal with the newer versions? Is this possibly my issue.. I was under the impression that with HAL the mount points are for ease of use in the fstab.. (not that you could mount a blank cd anyway...)
I have squeeze with xfce4 installed. How to disable automount of usb devices under xfce?
View 2 Replies View RelatedThere seems to be no documentation on how to automount partitions and USB devices under systemd in Jessie. (Overall, systemd entirely lacks any useful documentation or GUI configuration tools -- all very cryptic and hidden.)
I created custom files to enable automounting. I put them in /etc/systemd/system -- this may not be the right place, but it works.
Kernel note:
This does not work under the old Wheezy kernel linux-image-3.2.0-4.
To automount my Windows partition so I can access its files, I created:
/etc/systemd/system/media-windows.mount
The name of the file must match the mount point -- in this case, /media/windows
My file notes the device and file type, plus an fmask option so all the Windows files don't seem to be executable:
[Unit]
Description = windows mount to /media/windows
[Mount]
What=/dev/sda1
Where=/media/windows
Type=ntfs-3g
Options=fmask=111
[Install]
WantedBy=multi-user.target
The file ownership must be root.root. Apparently it doesn't need to be executable.
After creating, enable with:
sudo systemctl enable media-windows.mount
and it will mount on the next boot.
I read elsewhere that the before running the enable command you should run a start command:
sudo systemctl start media-windows.mount
but that didn't work for me.
I'm running archlinux & just recently started having a problem where ALL USB devices will stop responding for a second when a new USB device is plugged in. dmesg doesn't provide any hints.For example, I've got my music on an external HD & it will stop playing for like ~30 seconds if plug in my camera or gamepad...This issue only seemed to start after my home partition was erased & re-created, though I don't see how these two issues could be related.I've been running a custom kernel (2.6.35-rc6) for the past few months, and that hadn't changed to spur this issue. Thinking it may have been something weird with the kernel, I even switched over 2.6.36-rc6-mainline, yet this did not remediate the issue.
View 2 Replies View RelatedI managed with fstab but at restart came a black screen.I have called an HD '7200' then I reinstalled Fedora. And it does not automount it anymore. I changed fstab and black screen.
View 5 Replies View RelatedSince I created second user USB devices as PTP camera, flash mass storage automounts always for the new user.
Even the second user is not logged in automount does not work for main user. When I log in as second user (with device plugged in) it is mounted automatically after log in.
What can I do with this problem?
I would like to access devices from each user (not necessarily at the same time).
How can I configure it?
How can I "remount" device to my current user without switching into the second one (it's someones else account)?
When a USB device is attached to the laptop 10.04 does not automount the device. i.e. the device, be at an external drive, memory stick or iPod does not display with the correct icon on the desktop.
However, if one looks under Places|Computer there they all are with the correct icons. The devices can then be mounted from there.
This issue seems to be related to these other posts: [URL]
This is really disappointing given that 10.04 was promoted on its iPod friendliness!
System: IBM Thinkpad T41; Pentium-M 1.6GHz; 1Gb RAM
I have ubuntu 10.04 and am running gnome desktop.Howto disable automount for USB stick devices?
View 1 Replies View RelatedI am looking for info about how works automount process, and i didn't find info about the tollowing ...
I wonder ... how can i do to "config" automount process to put all my usb devices in write-back mode as default ... for example ... what file can i change? ... how to do it ?
And another one ... um... how to say to "automount process" ... to put my usb devices into a "deadline" io scheduler .. for example ... how to set io-scheduler for an automount device ?
My desktop is a Dell XPS 630i. It has a SD card reader on the front panel.
It used to work until about a few months ago (I guess, I don't use it that often). Now, the SD card is undetected when inserted.
If inserted before boot, then the existing partitions are available in thunar. I can remove and insert back the card in the reader without it being detected. I can mount and unmount the partitions. But if I "eject" the partition, then the card is not detected anymore even if pulled out and pushed in again.
Not much in dmesg (the drive is /dev/sde, and there are two partitions in the card, it is a raspian OS) :
Code: Select all[ 542.144424] sd 6:0:0:3: [sde] No Caching mode page present
[ 542.144430] sd 6:0:0:3: [sde] Assuming drive cache: write through
[ 542.159299] sd 6:0:0:3: [sde] No Caching mode page present
[ 542.159303] sd 6:0:0:3: [sde] Assuming drive cache: write through
[ 542.161556] sde: sde1 sde2
[Code] ....
When I click "eject" or manually remove the card, it says "capacity change from 2013265920 to 0".
I'm using Jessie, with the latest 3.11 kernel from experimental, but the issue was there with 3.10 and most probably older kernels. I tried to go back in time using older kernels (down to 2.6, I think the reader worked at that time) without succes, which may indicate it does not depend only on the kernel.
I don't have any "power saving" setting in the BIOS I could disable. And I didn't modify the BIOS, even the BIOS settings, in the last months.
I'm pretty sure it is a software issue as it worked with a knoppix 7-something.
Code: Select allecho 1 > /sys/bus/pci/rescan
command I've read about does not seem to work. It is supposed to force the detection but nothing in dmesg and no volume available in thunar.
I found a workaround yesterday. If I launch gparted (needs admin privileges), the SD card is detected. Like if it forced the detection. Sometimes, I have to specify the path explicitely to get it to appear :
Code: Select allgparted /dev/sde
Besides, I'd like to have this bug fixed, but I don't know against which package I could file a bug. Could it be some misconfiguration on my side ?
I have a simple usb mount problem, but after looking around, haven't been able to solve it. So far I've come across hal, dev, usbmount,pmount, and got lost in all this.
So, when I plug my usb as non-root I get that "not authorized" message. I solved this by installing usbmount package. After that, as non-root, usb mounts, but I can't write, I only have read rights. I tried changing "MOUNT OPTIONS" in usbmount.conf, but no luck.
What is the proper way of automounting usb and how to control access rights and what user can do what?
I also tried with fstab entries, but everytime I unplug my usb stick and plug it back in, /dev entry changes...
Could anyone tell me how to get Debian Lenny to automount CDs the same as Ubuntu does i.e. automatically, with a Desktop icon etc.I've worked out how to automount CDs using autofs, which is OK, but it still doesn't seem quite as good as the way Ubuntu does it.
View 6 Replies View RelatedI setup a luks encrypted /home partition on my Debian jessie, with an automount when my usb key containing the luks secret is plugged in at startup.
I did configure /etc/fstab so that my usb key be mounted at startup to /media/usb1, and /etc/crypttab to open my encrypted partition with the key at /media/usb1/homekey. It works.
However, when my usb key is not plugged in, boot fails and never shows welcome screen. I would change this behaviour so that when my usb is missing, boot resumes and do not mount /home partition. How could I manage this?
Is there a way to set up your system (running CLI only, no X) to automount flash drives? I know how to mount them manually, but I'd really like it if there was a way to just have the system do it automatically when I plug the drive in so I don't have to do it myself every time.
View 4 Replies View RelatedI would ask how automounting of devices works in debian. I'm trying to modify the name of automatic mount point from the label name of devices (or their UUID) to the devices name. That because the UUID is often a very complicated string, meanwhile the label often contains spaces; so become difficult working with theme in scripts...
View 7 Replies View RelatedI have a small issue where an USB harddisk is not automounting. CD's, USB pens etc. are automounting without issues, so it is a little bit strange.I am mounting it with UUID, because I want the mount point to be the same everytime.As you can see from the fstab, it is NTFS.
dmesg
[92.388083] usb 1-1: new high speed USB device using ehci_hcd and address 4
[93.079778] usb 1-1: New USB device found, idVendor=0bc2, idProduct=0502
[code]...
I have recently bought a Toshiba 1TB external USB disk.
I have formatted it using gparted to ext2 and Debian see's it but gives me an error "unable to mount volume" with some extra stuff about programs shouldn't disconnect shared drives.
I can mount it ok by creating a folder called usbdisk and the mount command "mount -t ext2 /dev/sda1 /home/mike/usbdisk" and it works fine, but I have to do this everytime I start the machine.
Does anyone know what exactly I should put into a setup file to make the machine do this everytime , but only if its there.
As I'm not very clued up on bash scripting , I'm assuming it something along these lines:
How would I add this at boot?? Would I add it to the end of "init.d/rc" ?
I'm using Debian Squeeze XFCE along with Windows 7 as dual boot on my notebook. I want to access my Windows 7 partitions from Debian for both reading and writing. I was a Ubuntu user in which the Windows partitions were visible by default. I want to know how to mount the drives used by Windows 7 automatically on startup.
View 4 Replies View RelatedI'm trying to familiarize myself with LXDE to help a friend of mine and one thing I just cannot solve, despite many googles, is how to allow a non-root user to auto-mount drives in the left-hand pane of PCMANFM.Everything works just fine as long as I have the root passwd. Not a huge problem but very irritating none-the-less.
View 9 Replies View RelatedI have a problem copying my udev rules from other distro to another pc running debian. My box is running debian without any DE and I want my USB disks to be automounted based on the label; I believe udev is the nicest way to do this task.
Anyways : my rules are (copied from archlinux wiki btw)
cat /etc/udev/rules.d/92-my-media-automount.rules
# vim:enc=utf-8:nu:ai:si:et:ts=4:sw=4:ft=udevrules:
# /etc/udev/rules.d/92-my-media-automount.rules
# Only work on sd*
KERNEL!="sd[a-z]*", GOTO="my_media_automount_end"
ACTION=="add", PROGRAM!="/sbin/blkid %N", GOTO="my_media_automount_end" .....
I notice the directory is made successfully up inserting the usb HD, but the mount doesn't succeed. If I manually execute above command, the mount goes ok.
I have installed a minimal system with openbox window decorator. (without any window manager) when i insert a flash disk to my computer, system doesn't mount it automaticly. i must mount it to a folder to use it.
for example:
I'm running Debian sid and currently have xfce 4.8.0 installed. I have the thunar-volman package and it is configured to automount everything (cdrom & usb). I have hal, udev, gamin and autofs installed as well.For some reason though, automount just isn't working. It's starting to annoy me.I can mount the devices manually.I looked around already but most posts just advise you to install hal or something.
View 4 Replies View RelatedI'm running Debian 8.1 Jessie on a Dell Latitude D400 using the GNOME Flashback DE. I cannot for the life of me figure out why it doesn't automout my USB drives and CD/DVDs.The regular GNOME and GNOME Classic will automount no problem but Flashback will not. It shows up in Nautilus but I have to mount it manually through Nautilus. I checked in dconf Editor under org/gnome/desktop/media-handling and automount IS checked. So I can't figure out why its not automounting.
Is there a way to fix that so Flashback will automount my CD/DVDs and USB drives or is it just a bug in Flashback that I gotta wait to get fixed?I've already searched the forum and Google to no avail but its possible I didn't use the right searh terms in Google.
I have a 2 Computers:
Computer A has a RAID array in it, and everything works perfectly fine. When Computer A powers on, the RAID array is automatically mounted, mdadm takes care of all of the things it's supposed to, and an icon for the RAID array is automatically placed on the desktop. Everything Just Works (TM).
Computer B is configured similarly to Computer A. They have identical configuration files (at least, all the ones I've checked are identical), and when Computer B powers on, the RAID array is automatically mounted, mdadm takes care of all of the things it's supposed to, BUT, NO icon for the RAID array is automatically placed on the desktop. How do I change that?
They have identical /etc/fstab's (the lines in bold are the ones that matter):
Computer A
mediaserver:/home/mediaserver/Desktop# cat /etc/fstab .....
Computer B
mediaserver:/home/mediaserver# cat /etc/fstab
# /etc/fstab: static file system information .....
They have identical /etc/mdadm/mdadm.conf's
Computer A
mediaserver:/home/mediaserver/Desktop# cat /etc/mdadm/mdadm.conf
DEVICE partitions
CREATE owner=root group=disk mode=0660 auto=yes
HOMEHOST <system>
MAILADDR root
ARRAY /dev/md0 level=raid5 num-devices=4 metadata=0.90 UUID=82bfcecf:5cd4d557:2f1fbd23:68e2797c
Computer B
mediaserver:/home/mediaserver# cat /etc/mdadm/mdadm.conf
DEVICE partitions
CREATE owner=root group=disk mode=0660 auto=yes
HOMEHOST <system>
MAILADDR root
ARRAY /dev/md0 level=raid5 num-devices=4 metadata=0.90 UUID=6c24c0e5:84ead07e:c109596b:d7e29b7e
The outputs of mount are also very similar:
Computer A
mediaserver:/home/mediaserver/Desktop# mount
/dev/hda1 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
procbususb on /proc/bus/usb type usbfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/md0 on /mnt/arrayCOMP_A type xfs (rw)
Computer B
mediaserver@mediaserver:~$ mount
/dev/hdc1 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
procbususb on /proc/bus/usb type usbfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/md0 on /mnt/arrayCOMP_B type xfs (rw)
mediaserver@mediaserver:~$
So how do I get an icon for the device /dev/md0 to automagically appear on the desktop every time the device is mounted (which occurs every time the computer boots up)?
I have a usb drive formatted using mkdosfs, and it must be manually mounted every time because it says "wrong fs type, bad option. bad superblock on /dev/sdb1, missing codepage or helper program, or other error" but it mounts just fine when I manually mount it. It would be nice if gnome would mount it when I plug it in instead of me having to go into root and mount the drive.
View 1 Replies View RelatedI'm running KDE in Jessie and also have Gnome installed. When I connect a usb drive it gets mounted at /media/username/disklabel. I would like to have it mounted at /media/disklabel which is how it worked in Wheezy. How can I make that change?
View 2 Replies View RelatedIf you want, skip straight to the 'QUESTION' at the end of my post & refer to the 'EXPLANATION' later. EXPLANATION: Using Debian 6.01 Squeeze 64-bit. Just put together a brand new 3.3Ghz 6-core AMD. I had a nightmare with my Highpoint 640 raid controller, apparently because Debian Squeeze now handles raid through sysfs rather than /proc/scsi. The solution to this, of course, is to recompile the kernel with the appropriate module for /proc/scsi support. So I thought "screw that" and I've yanked out the raid card & went with Debians software raid. This allowed me to basically complete my mission. The raid is totally up and running, except for one final step... I can't get the raid to automount at boot.
My hardware setup;
- Debian is running totally on a 64Gb SSD. (sda)
- I have 3x 2Tb hard drives used for storage on a raid 1 array (sdc,sdd,sde)
[Code]....
I'm using squeeze. hal allows any user (at least, ones logged into the console) the ability to automount any removable drive that is plugged in. I want to restrict the ability to automount to users who are in the group that owns the device node for the drive (some distributions use the "plugdev" group for this.) I know I can turn off automount individually in each desktop, but seeing as hal is the thing that runs as root and is actually doing the mounting, it seems to make the most sense to change the setting in hal.
View 2 Replies View RelatedWhile using Debian Jessie with Gnome 3 and Nautilus file manager, my Startech HDD docking station will not auto mount and can only be mounted using commandline while in root. Previous GNU/Linux distros, such as Ubuntu 14.04, this device auto mounted without issue. All other devices, such as USB HDD, and USB pen drives, auto mount without any problems.
"Initailize Startech device with a 120GB 2.5" SATA HDD Fujitsu drive"
udev creates two block devices
Code: Select all begins with:
brw------- 1 root root 8, 64 Aug 6 10:11 /dev/sde
brw------- 1 root root 8, 65 Aug 6 10:12 /dev/sde1
changes to:
brw------- 1 root root 8, 64 Aug 6 10:11 /dev/sde
brw-rw---- 1 root disk 8, 65 Aug 6 10:12 /dev/sde1
dmesg produces the following results:
Code: Select all[ 179.127724] scsi 6:0:0:0: Direct-Access FUJITSU MHW2120BJ G2 0000 PQ: 0 ANSI: 2 CCS
[ 179.128513] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 179.129393] sd 6:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 179.130379] sd 6:0:0:0: [sde] Write Protect is off
[ 179.130388] sd 6:0:0:0: [sde] Mode Sense: 28 00 00 00
[ 179.131903] sd 6:0:0:0: [sde] No Caching mode page found
[Code] ....
Between the thirty second and the fifteen second wait, the block device "/dev/sde1" receives the "disk" group and read/write attributes, however, the drive is still not auto mounted and can only be manually mounted via root. The block device "/dev/sde" remains with the "root" group and read/write attributes are accessible for "root" user only.
How to correct this issue to allow auto mounting?