Ubuntu :: External HD (reiserfs) Won't Automount In Lucid
Sep 18, 2010
My external HD where everything I backed up from my previous install will not mount. It shows up in lsusb, but when I do dmesg:
Code:
[20801.408614] usb 1-3: USB disconnect, address 36
[20804.190095] usb 1-3: new high speed USB device using ehci_hcd and address 38
[20804.343675] usb 1-3: string descriptor 0 malformed (err = -61), defaulting to 0x0409
[20804.345100] usb 1-3: configuration #1 chosen from 1 choice
Also of note, my main filesystem is reiserfs, so there isn't a problem of not having reiser installed.
I am trying to install the reiserfs drivers to read/write to my external drive. But keep getting command not found. Although the system can get man pages for modprobe.
modprobe reiserfs bash: modprobe: command not found
I also need to know how to add myself to the sudoers file. I have already tried visudo but this has not worked.
I cannot force Ubuntu to open my data DVDs upon their insertion. It is present, but it won't automount. Of course, in /etc/fstab are no indications for removabledevices, but this is correct, I think.
After some weeks of use and occasional unplugging-when-busy, my 500GB external USB hard drive no longer will automatically mount when I plug it in. The blue light lights up when I plug it in, but there is no automounting behavior. Also, when I type
Code: tom@zeppelin:~$ sudo mount -a nothing happens. The result of fdisk:
Code: tom@zeppelin:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xed1f86f7 .....
When a USB device is attached to the laptop 10.04 does not automount the device. i.e. the device, be at an external drive, memory stick or iPod does not display with the correct icon on the desktop.
However, if one looks under Places|Computer there they all are with the correct icons. The devices can then be mounted from there.
This issue seems to be related to these other posts: [URL]
This is really disappointing given that 10.04 was promoted on its iPod friendliness!
System: IBM Thinkpad T41; Pentium-M 1.6GHz; 1Gb RAM
Everyone seems to what to know how to automount an external USB drive. I'm trying to stop 9.10 from automounting it. Normally I use fstab to mount an external drive where I prefer it to be mounted. But after the last software update karmic (9.10) is now automounting my drive and screwing up the fstab mount. Some how the drive is showing up as /dev/hdd1 and /dev/hde1. I could just shutoff automount but I like it for USB sticks and cameras and MP3 players. How do you stop automount from mounting just an exteral USB drive??
I'm trying to setup my media streaming server, and everytying is going quite well, but there's one thing I don't understand. Can you have ubuntu automatically pick up and mount your external USB drive when you switch it on? I don't like leaving the hard drive running, and I only need to have it on when I want to stream something, but it seems to lose the mount when I switch it off and on again. Anyway to make it automatically detect that it's on and mount it back onto my mount point?
I have an external harddisk (actually removed from a laptop) and I want do some analysis and data recovery on it. I bought a sata-to-usb adapter. Now the problem is: if I deselect media_automount "media_automount_open" and I select "media_autorun_never", the external sata driver is not recognised and I have no /dev/sdb1 to manually mount. Not a hint of a newly plugged drive in dmesg.
Then I re-enabled automount and then I remounted the drives as read-only. Afterward I starter cloning the hd with dd.After some three hours, the f*ck*ng laptop remounted the partition rw and the dd process went into io error. So the question is: how can I safely work with a usb device with manual operations?
I'm probably missing something noobishly obvious here. I recently did a fresh Lucid install on my main desktop box, which had previously been running Karmic. With Lucid I can no longer use fstab in my laptops to automatically mount the desktop's shared media drive. Using the mount command works fine. One laptop is running Karmic, the other is running Hardy.This is the line in fstab on both laptops:
Code: //192.168.0.123/multimedia /media/multimedia cifs username=x,password=y 0 0 This is unchanged since the desktop was running Karmic, where auto-mounting from the lappys worked just
I have a problem copying my udev rules from other distro to another pc running debian. My box is running debian without any DE and I want my USB disks to be automounted based on the label; I believe udev is the nicest way to do this task.
Anyways : my rules are (copied from archlinux wiki btw) cat /etc/udev/rules.d/92-my-media-automount.rules # vim:enc=utf-8:nu:ai:si:et:ts=4:sw=4:ft=udevrules: # /etc/udev/rules.d/92-my-media-automount.rules # Only work on sd* KERNEL!="sd[a-z]*", GOTO="my_media_automount_end" ACTION=="add", PROGRAM!="/sbin/blkid %N", GOTO="my_media_automount_end" .....
I notice the directory is made successfully up inserting the usb HD, but the mount doesn't succeed. If I manually execute above command, the mount goes ok.
i have two centos systems one automounts the external usb hard drive and other doesn't what do you think could be missing in the system that is not automounting the external usb drive.
And right after I restart, all users have permission to read and write, and everything is fine. However, I have an automated backup utility (BackinTime) installed to back up particular (mounted network) directories every night, but whenever I check up on it the next day, I get the error "Unable to mount ..... Authorization required". (These network directories are mounted into the local filesystem in fstab as well.) Oddly enough, if I run BackinTime by hand as the users, it works fine. I'm running 10.04 LTS.
My Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertently fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia"
Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it.
But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD....
I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble...
I just wanted to use that partition for video editing and now I am locked out of my system!
11.3 in use with KDE. When I plug in an USB stick or my HTC phone into the USB connector the device is recognised but can't be opened in dolphin. This is the error message:
Code: org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org.freedesktop.hal.storage.mount-removable auth_admin_keep_always <-- (action, result) but the device is shown in dolphin as a removable device and
Code: # lsusb Bus 001 Device 005: ID 0bb4:0ff9 High Tech Computer Corp.
When I plug my USB drive in, the kernel sees it and I can mount it manually. However, it won't automount. I've done plenty of google searches but nothing I've tried has worked for 'GNOME, SUSE 11.3.' I am not sure if it is a permissions problem, configuration problem, a kernel automount, HID, or USB problem.
uname -a (stock SUSE desktop kernel): Code: Linux linux-hez9 2.6.34.7-0.7-desktop #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 i686 i686 i386 GNU/Linux
Here is the output from /var/log/messages: Code: Feb 14 15:47:09 linux-hez9 kernel: [16258.620213] usb 1-1: new high speed USB device using ehci_hcd and address 6 Feb 14 15:47:09 linux-hez9 kernel: [16258.749549] usb 1-1: New USB device found, idVendor=1058, idProduct=1023 Feb 14 15:47:09 linux-hez9 kernel: [16258.749553] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 .....
I have a luks-encrypted external drive with lvm on top. When I plug it in xfce prompts me (twice as usual) for the encryption phrase. Then, unlike when I have a regular file system on top and it automounts, I need to activate the volumes and manually mount. Is there a way to make these steps happen automatically?
I'm running Debian 8.2 and trying to set up so I can plug in a couple of external hard drives that will be used to sync data between systems using rsync.
I've got the rsync bit working how I want, thats not a issue. But what I can't seem to get to work properly is when I plug the devices in, they don't mount automatically.
I've tried various methods to no avail so far, systemd.automount in fstab doesn't seem to want to work, for some reason it gives a I/O error. I've tried setting up udev rules and they don't work either, so I'm a bit of a loss now.
Not sure what info to provide that would be relevant at this time, but can add logs as required easy enough.
This machine is headless, so command line only suggestions would be best. I can access X via the network if I have to, but I'd rather do it by cli for ease of access.
My fstab file
Code: Select all# /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=9b4e9dae-ea53-439a-a7fe-87c371c03803 / xfs defaults 0 1 # /home was on /dev/sda9 during installation
I just installed Lucid over Karmic on my netbook, unfortunately I had a little removeable USB hard drive attached during the installation. now when I boot, it keeps looking for the little HD, and I have to press "S" to make it "skip." what can I do to tell Lucid that I seldom use this drive so please shut up about it every time I turn it on?
A year ago I put some stuff on my external hard drive and now I'd like to retrieve it. I've upgraded through a couple of versions of Ubuntu since then and now it doesn't work. I saw that this is a frequent problem in the forums but couldn't find a solution.
i currently have lucid installed on my laptop hard drive. i took this drive out and then on a new drive in its place i have installed windows 7. reason why i couldn't put windows 7 on the same drive is that i have a BIOS based system and the hard drive is GPT based not MBR. therefore, i couldn't get windows back on it.
I figured that using an esata expresscard interface i should be able to use the Windows 7 drive externally without much speed penalty since ExpressCard in my case is implemented on PCI Express and not USB.
So i can update grub using Code: update-grub
and Windows 7 appears on the list. However, when i select this option during boot, it gives me errors that indicates that the external drive cannot be found (not surprising)
My guess is that when GRUB appears, the external hard drive has not been detected yet, and the modules for the expresscard may only be loaded during the boot process of lucid.
So I am wondering if there is anyway I can get this to work. meaning use lucid on my main drive and boot to Windows 7 from the external drive time to time.
i just installed 10.04 and everything works fine except that it does not recognize my external cd/dvd rom and my usb flash drives, I already found some threads related to this and they that talk about going to config editor and activating these options: media_auto_run and automount_open.
I have a installation of Ubuntu on a flash drive that I just finished updating, etc. I noticed that it ran surprisingly slow during all my updates and software installations. I looked into it further and found out that for Flash Drive installations, it is recommended to use ext2 due to it's speed and lack of journaling (to limit the amount of writes to the disk).
I REALLY don't want to spend all the time and effort I have just spentt on reinstalling from scratch! I'd like to convert my partition filesystem from ReiserFS to ext2. How can I do this?
Can I backup all the information, do a new installation using the LiveCD, and restore the backup? What program can I use, and which directories do I need to backup?
I'm about to do a fresh install on a new computer, and I plan to dual boot with Arch Linux and Ubuntu. I've been doing some reading on Arch Linux, and apparently one of the little tweaks that many Arch users use to increase performance is to put /var/ on it's own partition using a file system that is good for quickly writing many small files, namely, ReiserFS. I was wondering if this would do any good for Ubuntu. Is Ubuntu's usage of /var similar to Arch's, and if so would using a similar partition setup provide any performance increase?
I just read about reiserfs being way faster than ext4. I am installing lubuntu 10.04 on a Pentium 4 3.06 ht 512ram. Ide 150g this distro will be use only for running a small counter strike source server the system already ave ubuntu on ext4 and win7. So my question are.. 1- Can it install my distro on a reiserfs? 2- Is it better? 3- Is this different from other file system. I mean can it be logical?
I'm sure I'll be installing Debian Squeeze again soon. Does anyone know if there would be any problems if I installed Debian on a ReiserFS journaling system rather then Ext3?
I follow the wiki about install the files needed in Centos5Plus! I am not able to format the drives with REISERFS. i tried the command mkf2.reiserfs and mkfs.reiserfs. I am able to format them with ext3.
I have been hearing that the guy who developed REISERFS is in jail for chopping up his wife and therefore no more support for it? it that true?
I have a Onetouch 4 mini 160GB I bought a year ago. I t used to work fine but all of a sudden it started to become a problem device. My home pc has two operating systems on it: Windows 7 and ubuntu 10.04 lucid. the drive often fails to load on both systems. Sometimes it's recognized, but the reads are very slow and opening a folder on the drive takes around 120 seconds. Itried reformatting the whole drive, chicking it with chkdsk but it didn't help. Now I have around 70 GB of data on the drive. On my office pc I don't have such a problem and the drive works fine.
My home pc has an Asus P5B motherboard and intel core 2 duo cpu. I tried unplugging other usb devices, plugging in the extra power cord (data + data/power) and it didn't help. The drive also makes beeping sounds when I try to browes the files on it. I'm sure thid is not OS related as both Windows and Linux have the same issue. This is the output of dmesg | tail command on linux. You can see the os keeeps "resetting" the drive:
