Ubuntu Installation :: USB Devices Only Mount During Boot?

May 31, 2010

After upgrading to Lucid 10.4, I find that after booting I can no-longer auto-mount any USB drive when they are plugged in. They simply doesn't appear on the desktop as they did. Swap my PATA drive back to the one with 9.10 still installed on it is well.However, if I have USB drives plugged in before boot, they appears on the desktop, but are not auto-mounted as previously. Also when I click on any drive icon for the first time there is no response. Try again (on any drive) an the devices will all auto-mount revealing their contents in the window that subsequently opens. Everything them seems fine. I can unmount and remount at my leisure with any number of devices.

I do not have the problem of root only access that others have mentioned. I have played with usbmount and pmount as others have suggested, to no avail. They have both been removed.I have the HAL installed as default, and have already ecked media_automount_open for Nautilus on the gconf-editor.Disabling the floppy in the BIOS has not effect and I do not use autologin option.With (say) two USB drives attached, whether the devices are recognised at boot or not after boot,lsusb reveals:

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[code]...

View 9 Replies


ADVERTISEMENT

Fedora :: F13 Mount All Attached USB Devices After Boot Automatically?

Aug 31, 2010

One question: should F13 mount all attached USB devices after boot automatically? I guess it should. However, what I've experienced is that after boot and login, my USB modem + flash memory is not mounted. I need to manually unplug it and plug it again, and then it's mounted

View 1 Replies View Related

Fedora Installation :: Boot Failed: Wrong # Of Devices In RAID Set

Apr 13, 2010

I installed Fedora 12 and performed the normal updates. Now I can't reboot and get the following console error message.

ERROR: via: wrong # of devices in RAID set "via_cbcff jdief" [1/2] on /dev/sda
ERROR: removing inconsistent RAID set "via_cbcff jdief"
ERROR: no RAID set found
No root device found
Boot has failed, sleeping forever.

View 14 Replies View Related

Ubuntu :: USB Devices Only Mount At Startup?

Feb 21, 2011

After reformatting a usb drive with gparted, no usb stick will automount when I plug it in anymore. If the usb is in place at startup, however, it is recognized and mounted.The media will show up in fdisk and disk utility, but there is no link to it in Places > Computer. I have no trouble manually mounting, but I would rather not have to go through the hassle each time I plug in my flash stick. I am running Ubuntu 10.10 64bit

View 1 Replies View Related

Ubuntu :: 10.04 - Cannot Get Any Drives / Devices To Mount

Dec 10, 2010

I have an Acer Aspire 3500 laptop that I'm running 10.04 on, pretty much everything works OK, and I don't appear to have any hardware problems (I've checked using Gnome Device Manager). When I plug in a USB flash or hard drive, I don't get any drives/devices to mount, although in Gnome Device Manager the USB device appears as a USB Mass Storage Device.

Running tail -f /var/log/messages produces this:

Dec 10 19:44:31 darren-laptop kernel: [ 5800.632058] usb 1-3: new high speed USB device using ehci_hcd and address 4
Dec 10 19:44:31 darren-laptop kernel: [ 5800.765161] usb 1-3: configuration #1 chosen from 1 choice

View 4 Replies View Related

Ubuntu :: Get Devices To Auto-mount On Connection?

Jun 2, 2010

I have many flash drives, memory sticks, card reader, and 2 mybook 1tb so i am constanly plugging in, or unplugging devices from my machine running the latest version of ubuntu (i beleive 10.04?). I remember when i use to connect a device it would mount and work right off the bat. but now, everytime i connect anything, i have to go through Disk Utility to select the drive and mount it (also unmount before disconnect). Another problem is that some times disk utility doesnt like to work (as with a few other programs). This happends every now and then and im not sure if its my systems hardware or this version of ubuntu. every now and then programs like to stop responding (turn grey) and some programs like disk utility will open up, but just be blank and not show the detected devices

View 9 Replies View Related

Ubuntu :: USB Devices Auto-mount As Read-only?

Sep 19, 2010

My 10.04 64-bit desktop has been auto-mounting USB devices (flash drives and my mp3 player) as read-only for some reason. I had this issue happen once a while in the past, so I simply re-mounted it as rw.

Code:
mike@mike-desktop:~$ mount | grep -i 36CB
/dev/sdc1 on /media/36CB-D1A8 type vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,flush)

[Code].....

View 3 Replies View Related

Red Hat / Fedora :: Can't Mount USB Devices?

Aug 6, 2010

Something very strange has happened. For some reason when I plug in a USB device into my F12 rig up pops a error saying,Code: Unable to mount <name of device> file systemNot Authorised When I try to mount from the CLI I get, Code: mount: can't find /dev/sdb1 in /etc/fstab or /etc/mstab I'm not really sure what this is telling me or what I need to do to fix it.

View 4 Replies View Related

Ubuntu :: Permissions Of Mount Points For Automounted Devices

Jan 14, 2010

Ubuntu 9.10. I have a problem - when I mount other partitions of my hdd or the system automounts usb disks these are mounted in /media directory with permissions 0700. So there are two problems there:
- When I switch user on my desktop to another that user can't read data from the usb disks
- I can't share data through network because smbd doesnot have read permissions on the created mount points

I think editing /etc/fstab is wrong way, there would be more right way to change permissions on mount point. I tried to change/add parameters umask, allow_other in gconf-editor (/system/storage/default_options, subsections vfat and ntfs-3g) but that does not show any results. Article [URL] recommends Open Places → Computer. Every volume except the generic File system one should have a Drive and Volume tab in its properties dialog where you can set mount options. But I did not find those tabs. Where should I set option to mount usb disks with permissions rwx for every user of my system?

View 9 Replies View Related

Slackware :: Can't Mount Removable Devices?

Jul 3, 2010

This is a 'clean' upgrade from slack 13.0 to 13.1 (32-bit)To qualify: / , /home , and /usr/local are on separate partitionsand / was reformatted.When I attempt to mount a removable device - USB stick or DVD, I get the following error message:

Code:
Rejected send message, 1 matched rules; type="method_call", sender=":1.134" (uid=1000 pid=6328 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error

[code]....

View 3 Replies View Related

Debian :: Automatic Mount Of Removable Devices

Oct 27, 2015

I use Debian 8.2 without DE. I can mount removable devices (USB sticks, external HDDs) manually using mount/umount to specific folders under /mnt or /media. But I want them mount automatically when plugged-in as /media/disk-label. Also I want to be able safely remove already mounted devices without data loss.As I understand, I need to create custom UDEV rule and associate it with mount/umount scripts. E.g. mount script

Code: Select all#!/bin/sh

mount_point=$ID_FS_LABEL
if [ -z $mount_point ]; then
    mount_point=${DEVNAME##*/}
fi
# retrieve gid of the plugdev group and set it as owner of mountpoint
plugdev_gid="$(grep plugdev /etc/group|cut -f3 -d:)"
if [ -z $plugdev_gid ]; then
   
[code]....

Is this safe and correct approach or it is better to use something else?

View 3 Replies View Related

Debian :: Mount Devices In A Chroot Jail?

Apr 16, 2010

I would like to create a logon script, for specific user, under ssh connection, to backup several directories in a USB device; this backup will run when the device was plugged in and the user logs in server. My knowledge of linux isn't very deeply now, and some questions are in my head. I would like to make this in a chroot jail, and the user log in through ssh connection doesn't have to make nothing, the logon script will mount the USB device and make the backup (using rsync or whatever), and exit the ssh connection when it finish.

But the questions are:

- is possible to a user in a chroot jail mount a USB device?

- from this jail, the directories outside of the jail could be available or need to be bind or something for this task?

- it will be better to "jail" all the directories to backup, inside de chroot path (almost would be samba sharing for Windows clients)?

View 1 Replies View Related

General :: Mount Remote Devices Locally?

Jan 22, 2011

I was wondering if you can 'share' devices in Linux by overlaying the devices nodes? For instance, is it possible to use SSH (FS) + bind to selectively bind devices locally?

View 1 Replies View Related

General :: Mount Devices In A Chroot Jail?

Apr 20, 2010

I would like to create a logon script, for specific user, under ssh connection, to backup several directories in a USB device; this backup will run when the device was plugged in and the user logs in server. My knowledge of linux isn't very deeply now, and some questions are in my head. I would like to make this in a chroot jail, and the user log in through ssh connection doesn't have to make nothing, the logon script will mount the USB device and make the backup (using rsync or whatever), and exit the ssh connection when it finish.

Anyway the questions are:

- is possible that a user in a chroot jail mount a USB device?

- from this jail, the directories outside of the jail could be available or need to be bind or something for this task?

- it will be better to "jail" all the directories to backup, inside de chroot path (almost would be samba sharing for Windows clients)?

View 2 Replies View Related

Slackware :: Force Mount Of USB-Devices As Read-only

Jan 20, 2010

I want all USB-Devices (Hard-disks, USB-Sticks) that are plugged into a Slackware 13 be mounted as read-only.How do I achieve this?

View 4 Replies View Related

Ubuntu :: Change Default Mount Options For Removalbe (vfat) Devices?

Mar 4, 2010

I want to change the default mount options for removable devices, especially vfat devices, to have shortname=lower instead of the default shortname=mixed mount option. I googled around, and found references to /system/storage/default_options/vfat/mount_options gnome configuration option, but I don't seem to have this option set, actually, I don't seem to have a /system/storage tree in gconf-editor at all. searching in gconf-editor doesn't really yield any results.

View 7 Replies View Related

Ubuntu :: Setup Authentication To Mount Hard Disk And Other Removable Devices?

May 22, 2010

I am using ubuntu 10.04. I want to set up authentication to mount hard disk and other removable devices.

View 5 Replies View Related

Fedora Hardware :: USB Storage Devices Slow To Mount

Jun 22, 2011

Using Fedora 15 64 bit. The problem is when I put in a USB stick (directly into USB port front or back), or SD memory card via Card reader, they take a long time to auto mount. About 30 seconds. I've tried a few different USB sticks and memory cards. Once mounted they work fine. This is a new install, been running for a few weeks, but the problem only seems to have started in the last few days. Also, not sure if it's related, but now Shotwell takes about 30 seconds to start. The screen comes up, but the interface in non responsive for around 30 seconds. Both USB and Shotwell problems seem to have started at the same time.

View 3 Replies View Related

OpenSUSE Hardware :: Unable To (auto)mount Devices Through USB

Feb 19, 2010

Previously, everytime I insert a USB drive it automatically mounts. But now I am getting this error:

"Unable to mount 8.0 GB Media DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."

Also, previously my CD/DVD works properly. But now everytime I insert a disk, this is what I get:

"Unable to mount TOSHIBA

DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."

By the way, I am using openSUSE 11.1.

View 9 Replies View Related

CentOS 5 :: Unable To Mount Devices In Rescue Mode?

Aug 1, 2010

Booting to CentOS 5.5 works and I am able to login with all my devices mounted. When I boot from the install DVD and type "linux rescue" I eventually get the message, after attempting to have one of the screens mount my partitions in read/write mode:

"An error occurred trying to mount some or all of your system. Some of it may be mounted under /mnt/sysimage." But nothing appears mounted under /mnt/sysimage. Should I try mounting my CentOS 5.5 partitions manually at this point ?

View 7 Replies View Related

OpenSUSE Install :: Allowing Users Other Than Root To MOUNT Devices?

Dec 28, 2009

I have a non-super user on my box which I'd like to give it MOUNT and UMOUNT permissions but I don't know how.For example purposes, the user name is "USER".I don't want to make it into a SuperUser, just give it rights to be able to issue the MOUNT and UMOUNT commands at the terminal.

View 6 Replies View Related

Debian Multimedia :: Any Possibility To Adjust Gnome To Automatically Mount ONLY USB Devices?

May 27, 2011

i am trying to prevent Gnome from automounting my NTFS partition. Gnome uses for this package gvfs-mount. This package with other small one's is respnsible for automounting USB changeable media like USB sticks. That works fine for me. But I don't want Gnome mount my NTFS partition on my internal storage device, where Debian Squeeze is installed too. Since Squeeze Gnome works with gvfs-mount to bind smb, ftp NTFS in. For binding a whole NTFS partition I am guessing Gnome use ntfs-3g as well. But I don't know exactly. Is there any possibility to adjust Gnome to automatically mount ONLY USB devices?

View 1 Replies View Related

Fedora :: Changing Mount Point Of Automatically Recognized Devices (IPod)

Feb 24, 2010

When I attach my ipod it gets automatically recognised and mounted to "/media/user's ipod". This is great but I would like to change the mount point to just "/media/ipod/" as it easier to use with gnupod (command driven ipod access oh yes!!) I've had a look around and I know how to mount devices but I'm at a lose as to how things in fedora are automatically mounted... I use gnome so from what I've read hal, dbus, and udev yeah? but I'm not sure what configuration files need to be changed. At the moment I'm just wanting to change the ipods mount point but I would like know more so any technical how-to or articles, or things to look at (I'm thinking X), to understand auto mounting would be nice too.

View 3 Replies View Related

Ubuntu Installation :: Mount Point At Boot

Jun 24, 2010

I have a Pc with 2 hard drive, yesterday I installed ubuntu lucid but I forgot to set a mount point (let's say /datas) during partitioning, and now I have the hard drive icon on my Desktop. I would like to set the mount point during boot, what I can I do? Insert a fstab line? If I do that, the desktop icon si still there, so, what does ubuntu do when I configure a mount point on a secon har drive during installation?!

View 3 Replies View Related

Ubuntu Installation :: Boot From CD Cannot Mount /dev/loop0

Aug 19, 2010

I just dl'ed and burnt a 10.04 ubuntu disk (using infra recorder), and popped it in, the ubuntu load screen showed and progress got nearly done then a message shows:

"(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output error.

Can not mount /dev/loop0 (cdrom/casperfilesystem.squashfs) on //filesystem.squashfs."

EDIT: I did have a 9.1 disc somewhere that did work OK before now (but lost is )

View 9 Replies View Related

Ubuntu Installation :: SSD With EXT4 Will Not Mount On Boot

Nov 24, 2010

When booting I get the following error message:
Code:
The disk drive for EXT4 is not ready yet or not present.
Continue to wait; or press S to skip mounting or M for manual recovery.

The drive in question is SSD2, which I wanted to mount as an extended disk (non OS). This is what I did:
FDISK:
Code:
Disk /dev/sdb: 64.0 GB, 64023257088 bytes
255 heads, 63 sectors/track, 7783 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00029baa

Device Boot Start End Blocks Id System
/dev/sdb1 1 7783 62516916 85 Linux extended
BLKID:
Code:
/dev/sdb1: LABEL="SSD2" UUID="#######" TYPE="ext4"
FSTAB:
Code:
UUID=####### ext4 /media/mountSSD2 defaults 0 2

View 9 Replies View Related

Ubuntu Installation :: Error 17: Can't Mount - Can't Boot Win7

Nov 30, 2010

I did upgrade my Ubuntu on 10.10 and had always a Dual-Boot with Win7. After the install of Ubuntu, my grub wouldn't work anymore. I could only boot into Ubuntu, but GRUB didn't even appear. I already tried but this brought only the installs for Ubuntu and GRUB didn't start. Afterwards I tried to recover my MBR with the help of my Win7 DVD, but this didn't work out too. Now I can't boot neither Ubuntu nor Win7 and have to run from the Live-CD. I also tried to fix it with but setup(hd0) only returned, Error 17: Cannot mount etc. What can I do? I need my Windows for work and I don't want to reinstall neither Ubuntu nor Win7. Output of fdisk -l gives:

[code]...

View 3 Replies View Related

Ubuntu Installation :: Failed To Mount Filesystem On Boot After Upgrade From 9.10 To 10.04

Apr 30, 2010

After upgrading and restarting my laptop, The purple splash screen hangs, and the terminal gives this message.

Code:

Also the boot menu does not show (I cannot open the recovery mode)

View 2 Replies View Related

Ubuntu Installation :: Lockup On Mount Of Luks Crypt Fs At Boot?

Aug 10, 2010

It seems I've run into a bit of a problem. I recently upgraded to the latest kernel 2.6.32-24-generic (x86) but when I reboot into the new kernel and type in my password the system hangs, same when using a keyfile on the root file system.to give an outline of how the disks are setup.3 hard drives

sda1 / = unencrypted
sdb1 /home = encrypted w/ luks
sdc1 /backup = encrypted w/ luks

When i boot to the original kernel 2.6.32-21 I'm able to successfully get into the system.

View 1 Replies View Related

Ubuntu Installation :: Partition / Mount Point Of Ext3 And Dual Boot

Feb 19, 2010

I attach a picture of my future disk partitioning,as I thought it should be. As you can see, the first two partitions are 2 different windows installations. At the end of the disk, I have specified a partition as ext3 104855 MB (sda9) and swap 8192 MB (sda. What should the the mount point of sda9 be? Should I specify a partition for /, /boot, /home, /tmp, ...etc? Or it is ok to make mount point '/'?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved