Ubuntu Installation :: Transfer Installation From One HDD To Another?
May 1, 2010
I have two hard disks each with same size but one has 5400 RPM and noisy and i hate it .unfortunately it contains a ubuntu i use for work. I also have another hard disk with same size but its 7200 RPM and very silent.I want to transfer my ubuntu installation from the slow hdd to faster slient hdd. you know the obvious way by just reinstalling everything from scratch on the new hdd. But i find it as very inefficient . my idea is for a tool which can copy the same file structure on my slow hdd to faster hdd so after copying i can easily boot from that.
View 1 Replies
ADVERTISEMENT
Jun 5, 2010
Alright I couldn't explain it in the title for this post so I'll try to do my best here. As of right now I'm dual booting windows xp and ubuntu 9.04. Windows is on the c drive and ubuntu is on my g drive. They are both on the same hdd just different partitions. I have another hdd that I would like to install 10.04 onto and transfer over all of my settings (and files if possible) from 9.04 to the new installation of 10.04 on the new drive. Afterwords I'd like to uninstall 9.04 from the g drive and have that part of the partition back to continue storing programs and other files for windows. Basically I want each operating system to have their own hdd but I would like to transfer my settings from 9.04 to 10.04
Is this possible? I don't have MUCH that I don't want to lose on my current ubuntu, my main issue was that it took forever to get the wireless internet router to work and it finally does and I don't want to have to go through that again. I also don't want to lose my sound system settings because that took FOREVER to get working properly, and honestly I don't remember how I did it now, it was so long ago.
So if this is possible a little guidance would be great. If it's not possible let me know, I'll just start over fresh and clean with a new beginning and tinker around until I get everything working again.
View 1 Replies
View Related
Dec 23, 2010
What's the best way to transfer across one hdd to another? I want to avoid setting up my kubuntu 10.10 instance again and hoping there's a way to easily clone it across.
View 2 Replies
View Related
May 3, 2011
I have a desktop installation which is Windows 7 and Ubuntu 11.04 as a Wubi installation. I want to fully install Ubuntu on a partition as a dual boot system.Is there a way to retain all the setup I have on the Wubi when i do the install?
View 2 Replies
View Related
Jul 13, 2011
slow usb transfer speeds has been resolved in 11.04 (Natty Narwhal)? I am currently using Lucid and facing the problem of slow usb transfer speeds which has always been there in ubuntu but everything else is running just fine for me so I see no reason to upgrade yet unless the new OS has solved this problem.
View 9 Replies
View Related
Dec 26, 2010
I have a laptop with dual boot Windowz 7 64 bit and Ubuntu 10.04 LTS 64 bit using windows MBR and EasyBCD. I have no issues booting into either. I also have a 500 GB external HDD which has a NTFS partition for backup data and Linux root and swap partitions at the end. I have GRUB installed on the external HDD MBR and can boot into Ubuntu on the external HDD via bios options. I recently bought a larger external HDD 1TB. Now so far I have made same partitions as old external HDD namely NTFS for bakup followed by Linux root and swap partitions. Linux partitions were cloned using disk cloning while on NTFS partition I only copied data. How do I copy the GRUB from old external HDD to new one so that I can boot into my linux on the new external HDD? BTW the new HDD is Western Digital Passport Essential SE, which also has some factory installed image at the start of drive.
View 6 Replies
View Related
Jan 11, 2011
i would like share what i did when i migrate my ThunderBird 3.1.7 including (extensions, calendar, settings, addressbook) windows 7 to ubuntu 10.04. 1. Archive(7zip) the mail database or the thunderbird folder in the windows 7 which is in the location (C:Users(Ur Username)AppDataRoaming) 2. Install the TB on your linux and open it to create the ****.default folder and the profile.ini in the home/.thunderbird/* Note: althought your windows thunderbird archive backup has the ****.default and profile.ini it doesn't work in my case when i replace or put it the the home/.thunderbird/* directory 3. When you open the TB in the first time it will create *****.default and profile.ini, dont replace or delete it as i said above, what you must do is copy all the files or content in the directory of ****.default in the windows 7 backup archive which is in location (/Thunderbird/Profiles/.default/*) to the home/.thunderbird/ all of it but first remove the content of your ******.dafault and now its almost finish 4. Start ur TB and its ok Note: In my case the lightning calendar doesn't sync to google i reinstall my lightning and provider of google extension before it work. I think this is the 5th time i migrate my TB mail from windows xp to 7 to linux..
View 4 Replies
View Related
Feb 19, 2011
I have ubuntu installed on one hard drive (laptop hard drive). The hard drive has some bad sectors on one of the partitons. I have installed a new hard drive and now wan to import the ubuntu installation on the new hard drive. What is the easiest way of doing this? I dont' want to start fresh because I have a lot of custom drivers and settings saved.
View 4 Replies
View Related
Apr 23, 2010
I will be getting a new computer soon, and I would like to transfer Wubi partitions from one computer with Windows to another. (The reason I want to transfer the partitions instead of just making a new installation is because I want to keep EVERYTHING intact and all the files/settings/applications/etc the same.)
View 3 Replies
View Related
Aug 30, 2010
i have a 200gb hard drive and im upgrading to a 1tb hard drive and i want all my stuff like settings and files on my new hard drive whats the best and easiest way to transfer all my stuff from the old hard drive to the new one
View 9 Replies
View Related
Jun 23, 2011
I have a website hosting on a windows server with its ads being hosted on .net. i want to transfer all the hosting to ubuntu platform now but i dnt know what alternative to use for .net as .net is not supported by any linux distro.
View 1 Replies
View Related
Aug 23, 2011
I am using ubuntu with wubi right now and after a while I am thinking about creating a separate partition for ubuntu and installing ubuntu on it. But I was wondering how can I transfer my files and apps form wubi to the ubuntu installed on the partition? I don't want to install all the apps again and tweaks etc....
View 1 Replies
View Related
Mar 23, 2010
I have a server which is in an isolated LAN onto which I would like to install some packages from the Ubuntu Repositories.I realise I can go to packages.ubuntu.com and download them one at a time following the dependencies through but this is a bit of a nightmare.Is there anyway I can use the -d option of apt-get to download the files on another machine so I can transfer the lot over in one go?It is probably important to note that the server is running 8.04.4 and the other machine I have run 9.10 and may or may not have said packages installed.
View 1 Replies
View Related
Feb 24, 2010
I have tftpd-hpa and dhcp3-server up and running. I just want to install server edition via network, from the host machine (my laptop, running ubuntu 9.10) with an ISO file (ubuntu 8.04 32-bit server edition). I managed to boot the client machine with pxe-netboot technique, but instead downloading all the files from internet, I need to do this process directly from ISO. To transfer ISO from host to client, I also installed Apache. I unpacked ISO file into /var/lib/tftpboot/server/. I created a link to the Apache root: /var/www
Code:
ubuntu@ubuntu:/var/www$ ls
returns => index.html server
server folder is the place where I unpacked the ISO.
My dhcp3-server has this setup and it works well with netboot, but I don't know how to add Apache to the formula to transfer the iso file from host to client. Firewall is disabled. This is my edited /etc/dhcp3/dhcpd.conf file.
Code:
host pxeinstall {
hardware ethernet 00:06:29:DE:E3:CD;
fixed-address 192.168.2.4; (client IP)
next-server 192.168.2.2; (host IP)
filename "/server/install/netboot/pxelinux.0"; (relative to tftpboot)
} subnet 192.168.2.0 netmask 255.255.255.0 {
range 192.168.2.2 192.168.2.5;
option routers 192.168.2.1; }
When I pxe-boot the client, the process comes to a halt when tftp server is trying to access to pxelinux.0 file. I got thls error:
PXE-T00: Permission denied
PXE-E36: Error received from TFTP server
I have no experience with Apache... so I think there is a problem with my IP addresses.. Do I need to use 127.0.1.1 instead of 192.168.2.1 (my routers IP)?
View 3 Replies
View Related
Feb 25, 2010
I want to transfer the software and packages that's already installed. I have an ISO disc creator to take the current information on my hard disk and format it for an ISO, which I can burn onto a DVD, but what I'm wondering is, how would I go about reinstalling the OS
here's the backstory, I'm wanting to transfer the hard drive from this computer to the one I'm going to custom build once it's finished, and I'm pretty sure I would have to reinstall due to the fact that I would have to reconfigure and install new hardware drivers. If I'm wrong, please tell me so I don't waste the time and go through the trouble of this
my plan is to create an ISO of my hard disk, then backup all of my personal files, then remove them so the ISO will have more room (and I may get rid of some unnecessary packages), then get rid of everything on the hard drive (just use a livedisc of something and use a partition manager to delete all partitions on the hard drive) then move the hard drive over to the new computer, and reinstall with the ISO disc I created
the things that will be staying the same is the graphics card, some peripherals (like monitors, keyboard, wacom tablet, printer, etc...) but the motherboard has a different sound card and a different processor (I'll probably just install a different kernel to accommodate for that) and some different things that are smaller (don't forget the power supply)
offer a better method of transferring the hard drive (and don't say "just simply take the hard drive out and put it in the other computer" unless you have indisputable proof that it will work. I know it most likely won't work for multiple reasons, the drivers being one of them, the fact that windows can't do that (I have a different plan for windows that involves upgrading from vista 32bit to windows 7 64 bit))
View 9 Replies
View Related
May 9, 2010
I have managed to work out how to use remastersys to create a Custom.iso LiveCD.
Can anyone advise how I can transfer a folder of documents, so they are included in the custom.iso?
I tried to put a new folder/docs inside the 'examples' folder, which shows up on the Desktop of LiveCD users, but this 'examples' folder is write-protected.
View 1 Replies
View Related
Jul 5, 2011
I have Ubuntu 11.04 installed and running on my laptop and was wondering if there was any way to create an install disc/usb or some other way to install Ubuntu in its current state (including all apps, updates, settings etc.) onto my desktop.
View 6 Replies
View Related
Jan 18, 2015
I am trying to install Debian over Kali since in order to use steam, newest version of wine and a few other things causes a change reaction that would require about two-thirds of my main os re-written with non kali files which makes me a little uneasy.
I have downloaded the debian-live-7.8.0-i386-gnome-desktop.iso from torrent from the link from debian download listings at debian.org. and I put it on a 8gb flash drive formated with gparted to a bootable fat32 partition and is listed as being /dev/sdc I installed the iso to the drive uss dd using the following code
Code: Select allsudo dd if=debian-live-7.8.0-i386-gnome-desktop.iso of=/dev/sdc bs=4M; sync
now it boots to the flash drive just fine with only the gnome3 drivers loaded by the live os isn't fully functional with my system. Ie. when I log into any of the live modes it gives me a message that it was switched to gnome3 [fallback] I am using the current version of gnome3 desktop manager installed from source on kali with out any trouble.
Also when I click the graphical installer or the installer modes from the grub i get a background image with some sort of artifiacts in the top inchish of the screen then everything but the mouse freezes. But when I go into one of the live modes and click the installer in their it opens just fine but when it starts transferring files it says that it couldn't transfer files from the cd after all the language and localization screens at the beginning.
I did find a misc page on the internet involving a cruchbang with the same problem [URL] I went to the folder in the usb drive in question and it looks like since that was originally post something has changed or it could have been a crunchbang format.
So basically I am asking did I do a step wrong should I try a different way of instillation, or do I have a corrupted image? also I am unable to use disk media due to the type of drives and disks I have access to.
View 4 Replies
View Related
Mar 8, 2011
Last month I installed (not upgrade) squeeze in place of lenny on my dual boot laptop where the other OS is windows 7 Home basic (both C and D drives). I just noticed it today that while I can get any file from the windows to my squeeze I am not permitted to put any file to windows. As far as I remember I was not asked during squeeze installation whether the windows drives would be read-only drives. This difficulty was not faced when I had lenny. Can this problem be remedied now without going through a re-installation?
View 3 Replies
View Related
Aug 17, 2011
I'm new to this system and trying to install plug-ins but I always seem to get some sort of rejection..
[root@localhost haley]# yum install vlc
Loaded plugins: langpacks, presto, refresh-packagekit
[Errno 14] curl#6 - "Couldn't resolve host"
Trying other mirror.
Could not retrieve mirrorlist...^... error was
14: curl#6 - "Couldn't resolve host" .....
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-nonfree. Please verify its path and try again [root@localhost haley]#
So then I checked to see if I had rpmfusion-nonfree, and I do. I really have no idea what to do, I have spent hours trying to get this work. I want to be able to open any media file, avi, wma, mp4, etc.'m using Fedora 15.
View 2 Replies
View Related
Jun 17, 2010
How to Transfer 4 versions of Vista and Windows-7 installation DVDs into a flash drive The recent versions of MS Windows of Vista and Windows 7 installers support booting from a USB device so it is possible to transfer the contents of the installation DVD to a flash drive and use it for booting. A USB flash drive however is classified by M$ as a �Super floppy� that can only have one partition. This means one flash drive can store one MS Windows boot loader.
This tutorial shows how to use Grub, a Linux boot loader, to boot 4 Vista/Windows 7 installation in one flash drive. Technical consideration
(1) I have checked to my satisfaction that none of the MS Windows of Win2k, Xp, Vista and Win7 can mount or see more than one partition in a flash drive. That doesn't mean the user can't have multiple partitions. It is just MS systems have been engineered to mount the first one it recognises and disregards the rest.
(2) MS Windows installers of Vista and Win7 do not like to be booted from a logical partition. As a flash drive with a Msdos partition table can have a maximum 4 primary partitions hence this tutorial describes 4 versions of MS Windows installers of Vista Home-32, Win7 Ultimate-32, Vista Home-64 and Win7 professional-64
[Code]...
View 1 Replies
View Related
Feb 9, 2011
without realising I started thunderbird from a root window, I set it up along with rules and about 2 hours finetuning.
I figured out how to get the icon on the top panel, but that is naturally started as my user gsm.
Is there an easy way of migrating the whole mailbox and subfolders form the root install to the gsm user?
Or is it easier to start from scratch?
View 2 Replies
View Related
Mar 9, 2011
gufw - transfer gufw rules to a new computer.Set-up over time, a gufw contains dozens of rules.Is there a way to easily copy and transfer these rules to a new computer - without spending hours of setting it up again from scratch, by hand
View 4 Replies
View Related
Dec 10, 2009
I don't have a working DVD burner. I'd like to transfer the FC12 install DVD image to a USB thumb drive, and install from there. Is that reasonably easy to do?ow would I transfer the .iso file for the install image to the USB thumb drive in such a way that I could boot from i
View 1 Replies
View Related
Jan 1, 2010
Having a bit of a issue with Debian Squeeze and transferring files to the Sony PSP..Hook up PSP to USB port and Debian mounts it..I go to drag a 125 meg mp4 to video folder..Copy windows takes about 10 seconds to transfer it..Exit USB mode and there is no video there. Go back into USB mode and look at video folder on the PSP memory stick and there is no video..It vanished. From another after copy progress closed I right clicked PSP and unmounted it..
It error-ed saying device was busy and could not unmount..Looking at light on PSP i see memory stick is still being written to..i wait for light to stop flashing..About a minute or so..Then am able to unmount it..Go to PSP video and theres the video ready to be watched. Debian isnt accurately showing the copy progress...Its showing complete when it isnt..I have to watch the light on PSP to know when it is truly finished.
View 3 Replies
View Related
Jan 20, 2010
using Slackware 13.0, and whenever i trasfer my files to USB, like copy or cut and paste, it will show as if file transfered in an instant,like click paste and poof.the whole 1 gig file transferred in one second, and it wont show dialog box of transfer process, and then i have to predict some minutes and wait (till the transfer actually finishes, i have to usually see my USB's transfer indicator light), if i plug out before or my prediction goes wrong, i end up with corrupted files. This aint related to window manager, as same is case for KDE and XFCE tried thunar, konqueror, midnight commander, all of em resulted with same problem.
View 6 Replies
View Related
Mar 10, 2010
i am trying to transfer a file from my live linux machine to remote linux machine it is a mail server and single .tar.gz file include all data. but during transfer it stop working. how can i work and trouble shooot the matter. is there any better way then this to transfer huge 14 gb file over network,vpn,wan transfer. the speed is 1mbps,rest of the file it copy it.
rsync -avz --stats bkup_1.tar.gz root@10.1.1.22:/var/opt/bkup
[root@sa1 logs_os_backup]# less remote.log
Wed Mar 10 09:12:01 AST 2010
building file list ... done
bkup_1.tar.gz
deflate on token returned 0 (87164 bytes left)
rsync error: error in rsync protocol data stream (code 12) at token.c(274)
building file list ... done
code....
View 1 Replies
View Related
Feb 5, 2011
Package Installation error
Recently I get an error while installing any packages offline.
"Action would require the installation of packages from not authenticated source".
The key icon at top tight corner shows.
View 3 Replies
View Related
Jan 20, 2010
I'm trying to install Kubuntu 9.10 on my machine (I had the same problem with Kubuntu 9.04). The machine is:
- Core 2 Quad 6600
- Nvidia 7600 GS
- Two disk seagate 500 in mirroring raid software
When I try to install Kubuntu, after disk partition, my system dosn't see the CD. He tell me to insert disk into drive but I doesn't touch it. I resolved this mounting an external hard disk into /cdrom. After this, the installation continues until the step "select and install software". At this step, the installation procedure tell me an error. During this error, in the other console, I've this:
Code:
Jan 19 21:58:09 in-target: Alcuni pacchetti non possono essere installati. Questo può voler dire
Jan 19 21:58:09 in-target: che è stata richiesta una situazione impossibile oppure, se si sta
Jan 19 21:58:09 in-target: usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
[Code]....
View 3 Replies
View Related
Aug 15, 2010
I have installed Debian maybe 30 times over the years since about 2003, stable, testing and Sid on two different desktops and two different laptops. The only problem I have ever had is sometimes with a flaky daily build. It is one of my favorite distros.
BUT, I am totally frustrated is trying to install to a USB. I have followed the manual step by step about 6 times in the past two weeks. The result is always the same. The installation fails to find an installation iso image. Yes, I know the iso image and the hd-media vmlinuz and initrd.gz files are supposed to be the same version.
File: debian-testing-i386-netinst.iso from: [url]
Files: vmlinuz and initrd.gz from: [url]
The USB boots to a Language selection screen and proceeds through the Keyboard selection screen with no problems.
The next step which searches for an installation iso image fails.
Skipping that step and trying to load installer components from iso image also fails.
Searching the entire PC for an installation iso image also fails. (I even copied the netinst iso image to the HD root directory.)
View 6 Replies
View Related
