I have a desktop installation which is Windows 7 and Ubuntu 11.04 as a Wubi installation. I want to fully install Ubuntu on a partition as a dual boot system.Is there a way to retain all the setup I have on the Wubi when i do the install?
View 2 RepliesSo yeah I want to transfer my system to the real Ubuntu. Problem is I can't boot into my Wubi Ubuntu cause I lost boot.
View 5 Replies View RelatedI will be getting a new computer soon, and I would like to transfer Wubi partitions from one computer with Windows to another. (The reason I want to transfer the partitions instead of just making a new installation is because I want to keep EVERYTHING intact and all the files/settings/applications/etc the same.)
View 3 Replies View RelatedI am using ubuntu with wubi right now and after a while I am thinking about creating a separate partition for ubuntu and installing ubuntu on it. But I was wondering how can I transfer my files and apps form wubi to the ubuntu installed on the partition? I don't want to install all the apps again and tweaks etc....
View 1 Replies View RelatedAfter clicking on wubi.exe nothing happens. Wubi does not start at all.Windows XP, SP3.
View 9 Replies View RelatedI wanted to install ubuntu via wubi, but i had to format my partitions (can't do it on wubi ) so i used a crappy program(i don't remember the name) to get rid of Backtrack4 , because i wanted windows kept for my mom.So, that was the sorry, i've ended up with a GRUB error 22, and a Backtrack4 CD stuck in my DVD-rom.So my question is: Can somewone tell me how to fix error 22? (i've seen some methods online, but i obviously can't put a Windows CD in my DVD rom because the Backtrack4 DVD is stuck in there.
View 4 Replies View Relatedi just tried to install Ubuntu 11.04 (x86) on my Dell Inspiron 1520 Laptop (with a Nvidia 8600M GT graphics card) with Wubi. A normal installation try resulted in an unreadable screen after boot (see attachment). I then managed to get the installation going by modifiing the boot options like shown in this HowTo: [URL] After the installation Wubi automatically rebooted the system without any prompt, so that i couldn't install the proper Nvidia drivers (is there a way to prevent wubi from doing that?) like described in the HowTo. After the reboot the graphics were messed up again.
Boot parameters like "text" "single" or vga=xxx didn't work, adding nomodest and nouveau.modset again didn't help either (I think "text" acutally brings up the console, but i just see an unreadable "blacker" screen than normal). Is there an boot option for grub to disable all nvidia related drivers and the graphical login manager and just show a text based console? Or force the gfx driver to be the same as in the installation process (which was perfect...native resolution, no graphical errors until the reboot) (i tried xforcevesa without any luck; nosplash and removing quiet/splash does work - the bootup process is readable, but as soon as the login manager starts its messed up again)
I installed Ubuntu using wubi, But I didnt assign much space, probably like 17 gigs or something. My geting a pop up everytime my ubuntu starts up saying i got low disk space, very low disk space, Im runing ubuntu 10.10. How do I add more disk space? How do i make the partition bigger.
View 6 Replies View RelatedWubi 10.04 could not retrieve the required installation files
View 4 Replies View RelatedIs it possible to increase the disk space for a Wubi installation?
View 3 Replies View Relatedis it possible to recreate the whole wubi installation?Thats the situation: I only have 1 partition on my HD so i installed ubuntu via wubi and it worked perfectly fine. Recently though, i had to format my Windows but i backed up the whole installation folder of wubi/ubuntu.Now i want to get my wubi installation back. I know i can access the *.disk files with several tools, but im not opting for recovering some folders. I want the complete installation running again. So is there an easy way to recreate it?
View 9 Replies View RelatedHow will be complete windows login after installation wubi? How to make choice between load windows and linux?
View 3 Replies View RelatedI installed lucid using wubi to dual boot with vista - I'm just wondering if there's any advantage to be gained into going back into vista, un installing lucid, making the necessary partitions and reinstalling lucid 'properly'.I use both OSs on a laptop so the power issue regarding fs vulnerability isn't that much of a concern.
View 9 Replies View RelatedI'm very new to Linux and Ubuntu (about 2 days) and am having a hard time getting Ubuntu to work. I'm not completely sure that I'm posting in the right forum since I have several issues. I can't tell what's causing what.
I'm using the wubi installer for version 10.10 (i386 - 32 bit). I have an AMD 64-bit, but the wubi installer for that only crashes when I try to boot it the very first time. I get a blank screen and my tower is silent. Version 10.04 does the same. Version 10.10 is the only one that gets me somewhere.
So, I installed ndiswrapper and the proper driver for my USB adapter. Now I have 2 main problems:
1). the most relevant to this board is that when I use the update manager to get all 135 updates, I'm prompted to reboot to complete the installation. When I do that, i get the same blank screen and silent tower treatment. Oddly enough however, when I went back to windows, uninstalled ubuntu, then reinstalled it again using wubi, the update manager said that I already updated an hour ago (!?!?.. I assume it's still reading the old files from the previous install attempt). Unfortunately I messed it up anyway trying to fix my second problem...
2). my internet connection fails here and there. I don't know if it's ndiswrapper or the driver or what. Once it fails, it won't reconnect. I have to go into ndiswrapper, delete the current driver and reinstall it. This has happened to me while on the internet (scouring these forums) and while downloading the updates and whenever it feels like it.
Also, the system does freeze up on me here and there as well. Sometimes when I'm using ndiswrapper. Sometimes when I'm authenticating myself. Sometimes in update manager and sometimes in synaptic. Right now it's working. But I haven't updated yet and I'm afraid to try.
I want to put ubuntu on it for daily use and keep windows for games. Have done the wubi process but desktop ubuntu takes forever to boot. Ubuntu Netbook Remix seems like the best idea but I want to do it via wubi so as not to loose windows.
View 2 Replies View RelatedHaving a bit of a issue with Debian Squeeze and transferring files to the Sony PSP..Hook up PSP to USB port and Debian mounts it..I go to drag a 125 meg mp4 to video folder..Copy windows takes about 10 seconds to transfer it..Exit USB mode and there is no video there. Go back into USB mode and look at video folder on the PSP memory stick and there is no video..It vanished. From another after copy progress closed I right clicked PSP and unmounted it..
It error-ed saying device was busy and could not unmount..Looking at light on PSP i see memory stick is still being written to..i wait for light to stop flashing..About a minute or so..Then am able to unmount it..Go to PSP video and theres the video ready to be watched. Debian isnt accurately showing the copy progress...Its showing complete when it isnt..I have to watch the light on PSP to know when it is truly finished.
I am trying to install 10.04 with wubi and I encounter a strange error:
At first, everything runs normally. Then I am asked to reboot the system.
After rebooting, Ubuntu starts with a GUI (desktop background, my USB-Mouse is working) and a Window appears ("completing installation" and some advertisement).
A dialog tells me, that the systems tries to set the time (probably from an NTP Server). This is shown with a completion bar, starting at 571% and going up to 800% in several steps. Then it says: "Installation des Grundsystems".
Next steps: creating ext4 file system, copying files ... Again, a progression bar appears, going up to 28%.
Then, an error message appears: "Datei entspricht nicht ihrer Quelle auf der CD/DVD" (file does not match the source on CD/DVD).
It gives me a filename(e.g. /target/usr/lib/smbcquotas) and the choice to Abort/Retry/Skip. I click on "Retry" ("Skip" has exactly the same effekt).
The progress bar goes up to 38%, and I can hear that files are copied. Then the system hangs, showing the desktop wallpaper, mouse functioning. I can only turn it off.
I can try this procedure several times. I even used different disks (one brand new). It always comes to the same end. The only thing that changes are the file names ut gives me. I think that the error message is misleading. Probably there is another error behind the scenes.
I had ubuntu running in wubi just fine for several weeks. I had to do some system reconfiguration which forced me to re-initialize the whole drive that wubi was installed in. I saved the whole ubuntu directory thinking I could just re-install wubi, rename the new ubuntu directory, copy in the old ubuntu directory in it's place and life would be good. Not so.
I found an article which seemed to cover this sort of scenario so I tried the following:
- Installed wubi
- Made sure it booted
- Didn't complete the installation--rebooted to windows
- Replaced just the root.disk file from the old installation, overwriting the newly created root.disk file.
- Booted wubi
- I get the grub menu, then after that I get the following error message:
I have ububtu install via wubi. i want to change the install and TOTALLY replace it still using wubi. Is there anything special i have to do so that i don't end up with 2 wubi installs or 3 options on my boot list?
View 2 Replies View RelatedWubi doesn't seem to run on Win ME? I downloaded wubi and click to run, the hour glass spins for ten seconds then nothing happens. Windows task manager shows nothing related to wubi running. Situation : I want to install a dual boot UBUNTU system on an older laptop whose CD is broken, floppy works, it's already dual partioned, the BIOS doesn't support booting to USB drives, but it can read USB drives. I've got a similar laptop that fully installed 9.1 from CD and it works fine (ubuntu only).
I figured if I could install a dual boot ubuntu on this unit via wubi, I could then delete and absorb the windows partition. However, wubi doesn't appear to run. Supposedly wubi runs on 98. I can't ever recall anything that 98 ran that ME couldn't.Except Wubi? Could it be having trouble connecting to the internet via an old browser (ie 5.5).
If you still have windows on some of your machines and a bit of free drive space, your help testing Wubi for the 10.04 Lucid release would be most welcome.Please use the latest Wubi version available on [URL] There is no need to burn or use a CD, Wubi will automatically download and use the latest daily ISO.If you have any issue, follow this procedure:
Uninstall and try with a clean installation using the latest revision from the above link
If that does not help, when you reboot into Ubuntu the first time, you can press ESC for more installation boot options, sometimes those fix the issue. Check [URL] if there is already an open bug, in case feel free to add a comment in there If none of the above helps, feel free to ask on this thread (I am subscribed). If you think you stumbled upon a new bug, an even better place for reporting your issue is [URL] More points if you attach the wubi.log file which is located in your user temp directory.
Currently helping my friend to install lucid beta 1 via wubi.And now have been stuck at the part 'Installing language packs 94% Running dpkg' for quite sometime (25mins). I have no idea what i should do.
View 3 Replies View RelatedI have recently discovered ubuntu and like it's elegance and simplicity and want to learn more about it "hands on". To this end I have tried to put it on one of my PC's running the Vista SP2 OS...When i try to install it with the CD the drive spins up then starts "hunting"..next the PC shuts down..black screen monitor.no KB or Mouse..the monitor flashes a box saying "power saving mode" then all is dead except for the power button being lit..I have to manually turn the PC off to recover...Next i did a D/L of wubi and rebooted as advised.Selected ubuntu on the BIOS and had the same final result as B4 with the CD. I have D/L and burned 2 CD's, one with my XP machine and the other with the Vista machine..Both CD's work as advertised on my XP machine (i did the "live" install) but not the Vista. The Vista machine is an HP with: AMD Athlon 64x2 3800+ CPU..3 GB of RAM..250 GB HDD. I do not like Vista ( i inherited the machine) it's a pain in the posterior. IMHO ubuntu and it's ilk are the way to go and i intend to do just that one way or the other.
View 5 Replies View RelatedI tried upgrading my netbook's 10.04 install (which I installed via Wubi) to 10.10, but when it restarted the whole install was boned and unusable (literally just a black screen). I had a feeling this might happen, so I went to re-install, but I noticed that Wubi will only install 10.04, and I want to try out the new Unity interface. Is Wubi LTS only, or are they just taking some extra time to release 10.10 support?
As for why I'm using Wubi, my netbook has no disc drive, and I don't have a spare USB drive around.
I have purchased a new Aser I5 laptop....Is Wubi the way to go to install Ubuntu 10.10 into this window machine. I hear a lot of people don't like or use Wubi. If I use Wubi can I pick the size on mt 705 gig hard drive to allow for say 100gig or 200 gig. etc.for Ubuntu?
View 4 Replies View RelatedI have been reading about Ubuntu for a long time and now I finally decided to give it a try. I am now running Windows Vista Home Premium 32-bit SP2. I downloaded the Ubuntu 10.10 and the appropriate wubi for it. I wish to install using wubi as this is my first time using Ubuntu and I wish to see if it is the right thing for me. However after 4 hours I now give up. Both wubi and the .iso file are on the same folder yet when I click wubi.exe I get the usual windows permission prompt and after I click continue nothing happens, no installation, no prompts, just nothing happens. What is causing this? I really want to give Ubuntu a try.
View 9 Replies View Relatedi 've downloaded and installed ubuntu 11.04 alongside win 7 via wubi, reboot my pc as the installer ask, but the boot menu does not appear on start, and windows 7 is loaded as usual. What can i do?
View 1 Replies View RelatedIs there a way to check if the current installation was done through wubi?e.g. something like "lsb_release -a" command that would show that the installation was done through wubiPerhaps the "/host" mounted directory?
View 2 Replies View RelatedRunning the latest wubi.exe on Windows 7 x64.It creates a %temp%/pylXXX.tmp.exe file (with wubi logo) that it removes after ~1 second.It creates a %temp%/pylXXX.tmp folder wich is empty and that is not removed.Running in XP compatibility doesn't help, removing generated files don't work either.The wubi process dies quite quick and after it gets ~4000kB memory usage.I don't find any log files
View 3 Replies View RelatedIs there a way to break wubi out of its box? As in, resizing /dev/sdX and moving the current partition data onto there? Or would I have to do a fresh-install, and then copy over the post install data? The reason I'm asking is because, The desktop Wubi is currently running on, has migrated into a router(has some epic umph), and its reached its 30GB limit, and I also have the hard drive space to support it now.
System Specs:
AMD Phenom II 1090T @ 3.7Ghz(6 cores)
16GB DDR3 1600Mhz
2x AMD Radeon HD 6850s.
+2 NICs forgot brand :/
Off Topic but slightly relevant: Nic 1 = Server Switch, Nic 2 = Non-Server Switch.
Onboard NIC: Modem.
-facepalm- didn't look hard enough. [URL]