Slackware :: No Transfer Process Shown During USB Transfer?
Jan 20, 2010
using Slackware 13.0, and whenever i trasfer my files to USB, like copy or cut and paste, it will show as if file transfered in an instant,like click paste and poof.the whole 1 gig file transferred in one second, and it wont show dialog box of transfer process, and then i have to predict some minutes and wait (till the transfer actually finishes, i have to usually see my USB's transfer indicator light), if i plug out before or my prediction goes wrong, i end up with corrupted files. This aint related to window manager, as same is case for KDE and XFCE tried thunar, konqueror, midnight commander, all of em resulted with same problem.
View 6 Replies
ADVERTISEMENT
Apr 20, 2010
I have few different usb cards and socets , some of them i have really hotwired.. and i would like to find out where to keep my usb-hdd . few months ago i would use "total commander" it would show .. copying-444Kb/s but these times are over...
View 1 Replies
View Related
Jan 1, 2010
Having a bit of a issue with Debian Squeeze and transferring files to the Sony PSP..Hook up PSP to USB port and Debian mounts it..I go to drag a 125 meg mp4 to video folder..Copy windows takes about 10 seconds to transfer it..Exit USB mode and there is no video there. Go back into USB mode and look at video folder on the PSP memory stick and there is no video..It vanished. From another after copy progress closed I right clicked PSP and unmounted it..
It error-ed saying device was busy and could not unmount..Looking at light on PSP i see memory stick is still being written to..i wait for light to stop flashing..About a minute or so..Then am able to unmount it..Go to PSP video and theres the video ready to be watched. Debian isnt accurately showing the copy progress...Its showing complete when it isnt..I have to watch the light on PSP to know when it is truly finished.
View 3 Replies
View Related
Sep 12, 2010
How can I send a job running in one bash instance to another? I tried disowning the job, and resuming it with a "fg %cmd" from another terminal, but that doesn't work.
View 3 Replies
View Related
Jul 23, 2011
My requirement is nearly transferring 50GB files from remote server to local server via SCP command,while transferring the data its break-en because of some reasons in 35% itself. is it possible to resume the transfer process again from this 35% process.
View 3 Replies
View Related
Mar 10, 2010
i am trying to transfer a file from my live linux machine to remote linux machine it is a mail server and single .tar.gz file include all data. but during transfer it stop working. how can i work and trouble shooot the matter. is there any better way then this to transfer huge 14 gb file over network,vpn,wan transfer. the speed is 1mbps,rest of the file it copy it.
rsync -avz --stats bkup_1.tar.gz root@10.1.1.22:/var/opt/bkup
[root@sa1 logs_os_backup]# less remote.log
Wed Mar 10 09:12:01 AST 2010
building file list ... done
bkup_1.tar.gz
deflate on token returned 0 (87164 bytes left)
rsync error: error in rsync protocol data stream (code 12) at token.c(274)
building file list ... done
code....
View 1 Replies
View Related
Jul 27, 2010
is there a way that i could transfer my slackware in a usb so that i could get my os "on the go"? more like having my computer to boot in a usb then continue my work.
i saw slax thats why i'm wondering if i could do the same on my slackware.
View 14 Replies
View Related
Dec 13, 2010
About NFS.
Server:
Client(s):
Code:
I have followed Robbie Workmans' HowTo [url]
Reading and writing works absolutely fine with small files but large files are tediously slow in writing to the server. (rw,no_subtree_check) are options in exported directories.
What is your experience with NFS and how can I speed up large file/folder transfer(write) speeds?
View 5 Replies
View Related
Jul 4, 2010
My friend bought an old hard drive. He noticed something with the hard drive that it was just replaced with a SATA socket. So meaning, the SATA socket was soldered to the PATA hard disk to replace the PATA socket to SATA socket to make it a SATA.
Now the question is:
1. Does the Transfer Rate of the harddisk (that has been replaced from PATA socket to SATA socket) would be SATA transfer rate? OR would still be PATA transfer rate?
View 4 Replies
View Related
Apr 13, 2010
Currently using 9.10 KK on HDD that is getting ready to buy the farm. Got a decent deal on an SSD but what's the best way to transfer my old HDD to the new SSD without hassles? I've got a ton of files and assorted garbage I'd like to keep.
View 1 Replies
View Related
May 13, 2011
I have a Iomega Prestige 1TB harddrive bought it half a year ago, but now I have a problem copying anything from it or to it. When copy something to the harddrive the copying window pops up, and when the green progress bar fills about 9/10 of the bar it stops, and another window pops up saying "can't read from the source file or disk", and below it the description of the file and two buttons "Try Again" and "Cancel", but for most of the files the green progress bar in the copying window doesn't even show, and a green small bar just keeps going from left to right without starting the copying, this stays for about 15 minutes then the "can't read from source or disk" pops out. I can't copy or move anything to it or from, and right now my computer's HD is full so I really need the External HD.
View 9 Replies
View Related
Aug 16, 2010
I have puppy linux on a 512mb usb flash drive. I would like to put all of it onto a different usb flash drive with more memory. I used windows vista and copied all of the files from my first usb to my second but when I tried to boot it did not work.
View 10 Replies
View Related
Jun 4, 2010
I just noticed that I'm downloading about 60KB/s but no connection is established according to "netstat -tup". I use fluxbox, no automatic updates and the transfer exist even after relogging of my user.
View 1 Replies
View Related
May 25, 2010
I have a linux server and I have SSH Access to it.
How do I transfer my files to my desktop.
View 1 Replies
View Related
Mar 13, 2010
im running fedora 12 and am relatively new to linux..i have been unsuccessful researching this issue.a complex task for an otherwise simple question.perhaps the phrase is not native to linux but the operation is universal.how to transfer filesr move files from one location to another.on windows there was a tweek i found that added an option to the context menu "move to".it would physically move the file.any file to any location.fedora has "send to" but leaves the original and may not be the correct method.fedora also has copy/paste but does that duplicate or merely produce a copy?i want to transfer or move video files both small and large and audio files as well.i want to move them from one hd to another.code is possible but would prefer a more manual solution such as an application or context menu option.perhaps copy/paste would be legit enough for linux and i can see why.but for windows copy/paste and "send to" were considered sub standard methods of file transfer.
View 4 Replies
View Related
Aug 5, 2011
I have setup ssh between a F15 box and a remote centOS box. I am using ssh -X, then nautilus/gnome-session to open a gui file browser/desktop environment of remote machine. But anything I want to copy from remote machine to local machine by gui, is showing 'path not found' error. CLI work just fine but is it possible to transfer files between remote and local machine by gui over ssh?
View 3 Replies
View Related
Apr 9, 2011
Machine A holds important source data that needs to be backed up. Machine B is where the data will be backed up to.They're both Ubuntu.I want to have an automated process that allows machine A to create an encrypted tarball and copy it to machine B, without human intervention, but doesn't allow anything except copying the file over to a target directory.I thought about using a chroot jailed account, but this seems to be a pain to set up and overly complex. I really just want to be able to have machine A to copy files to machine B, via automatic cron, but I also want to prevent the mechanism that allows the copy from allowing any other actions (copying to any other directory, logging in, executing any other commands noninteractively, etc.). Also, the transfer must be encrypted (e.g. using ssh somehow).
View 1 Replies
View Related
Sep 21, 2011
I have machine A with a public IP address (addr_a), machine B within a LAN of private IP address(addr_b), the router of the LAN has a public IP address (addr_r).If I log into machine A by ssh from machine B, how can I use the command scp to copy files from machine A to machine B?
View 1 Replies
View Related
Feb 27, 2010
How do I transfer my files from Windows Xp to Ubuntu??
View 1 Replies
View Related
Jun 22, 2010
My friend calls me and says he has a problem... Hes got like 48 short cuts put into the apps menu all running command lines in terminal that run short cuts to various programs.. transferring the programs not an issue cause they can all be transferred using APTonCD. but how can you transfer the shortcuts from the menus to another computer he's upgrading w/o typing them all over... Are all these stored in a file somewhere? how might it work?
View 9 Replies
View Related
Oct 11, 2010
I just transferred some 300mb worth or music, and I was shocked to see it going so fast! I have some really old generic mp3 player, it was reading at 6mb/s (thats mega BYTE not BIT) and write at 2.2mb/s, sense when was usb2.0 this fast? But when I try to benchmark it with the disk utility I get an error:
Error benchmarking: helper exited with exit code 1: Device /dev/sdb is too slow to benchmark
I benchmarked my TB hdd, and I got 139mb/s! on 10.04 I got only 70ish. What did they do that's so different? According to [URL] 2.0 max speed is 480Mbits/second so that 60mb/s (member this is theoretical speed, real world speeds are nothing like this XD), I have never got that, the max I have ever got before this was 2mb/s read.
View 3 Replies
View Related
Jan 25, 2010
Is there a device that would allow me to transfer files from my old IDE hdd to a new SATA hdd? My computer died (motherboard, possibly ram and psu) with my files trapped on my old IDE hdd. I do have a backup on DVD, but it is a little old. Thus, I would like to get the current files on the IDE hdd and either transfer them to a SATA hdd or burn them to DVD.
View 3 Replies
View Related
Feb 13, 2011
I need to transfer some a large amount of file from my Linux lap-top to my desktop Windows machine. Can I connect the two computers through a simple crossover cable and simply navigate into the Windows machine and move to files manually or if not, what's the best way to do this? I don't want to burn a bunch of disks.
View 2 Replies
View Related
Feb 14, 2011
how can we transfer the file from putty session to windows host which resides remotely....
View 1 Replies
View Related
Nov 13, 2010
I copied xp disk to debian computer, now cd is cracked want to put on virtual machine. I built computer with:
AMD PHENOM II 1090T X 6 processor
ASUS MB
10Gigs ram
1Tb sata hd
Os Debian squeeze I actually used 40G pata hd for testing purposes. Anyway I want to install xp on Vm. Do I just use ssh or vnc to transfer? Also when I copied to file I'm not sure if any components are missing. It is a registered copy, I have the key. I would have copied xp hd but it's corrupt.
View 14 Replies
View Related
Oct 4, 2009
We are having few computers in ms-dos 6.22 , we want to download file from Dos machine to redhat linux machine.
View 4 Replies
View Related
Oct 27, 2010
I need to create a program that has both a server and a client and can transmit PDF and text files between the two using UDP as the underlying carrier while behaving as if it is TCP. We have successfully created a UDP program that can simply transmit strings, but we are not really sure on how to transform this code to do files. We know that we need to use a buffer of some sort to transmit the file in pieces.
Code:
//dg_cli.c
#include "unp.h"
#include "sys/socket.h"
#include "string.h"
#include "stdio.h"
#include "stdlib.h"
#include "arpa/inet.h"
#include "netdb.h"
#include "sys/file.h"
#include "sys/types.h"
void dg_cli(FILE *fp, int sockfd, const SA *pservaddr, so
{ int n;
char sendline[MAXLINE], recvline[MAXLINE + 1];
while (fgets(sendline, MAXLINE, fp) != NULL) {
sendto(sockfd, sendline, strlen(sendline), 0, pse
n = recvfrom(sockfd, recvline, MAXLINE, 0, NULL,
recvline[n] = 0; /* null terminate */
fputs(recvline, stdout); } }
Code:
//dg_echo.c
#include "unp.h"
#include "sys/socket.h"
#include "string.h"
#include "stdio.h"
#include "stdlib.h"
#include "arpa/inet.h"
#include "netdb.h"
#include "sys/file.h"
void dg_echo(int sockfd, SA *pcliaddr, socklen_t clilen)
{ int n;
socklen_t len;
char mesg[MAXLINE];
for ( ; ; ) {
len = clilen;
n = recvfrom(sockfd, mesg, MAXLINE, 0, pcliaddr, &len);
sendto(sockfd, mesg, n, 0, pcliaddr, len); } }
Code:
//udpcli01.c
#include "unp.h"
#include "sys/socket.h"
#include "string.h"
#include "stdio.h"
#include "stdlib.h"
#include "arpa/inet.h"
#include "netdb.h"
int
main(int argc, char **argv)
{ int sockfd;
struct sockaddr_in servaddr;
if (argc != 2) {
fputs("usage: udpcli <IPaddress>", stderr);
exit(0);
} bzero(&servaddr, sizeof(servaddr));
servaddr.sin_family = AF_INET;
servaddr.sin_port = htons(SERV_PORT);
inet_pton(AF_INET, argv[1], &servaddr.sin_addr);
sockfd = socket(AF_INET, SOCK_DGRAM, 0);
dg_cli(stdin, sockfd, (SA *) &servaddr, sizeof(servaddr));
exit(0);
}
Code:
//udpserv01.c
#include "unp.h"
#include "sys/socket.h"
#include "string.h"
#include "stdio.h"
#include "stdlib.h"
#include "arpa/inet.h"
#include "netdb.h"
int
main(int argc, char **argv)
{ int sockfd;
struct sockaddr_in servaddr, cliaddr;
sockfd = socket(AF_INET, SOCK_DGRAM, 0);
bzero(&servaddr, sizeof(servaddr));
servaddr.sin_family = AF_INET;
servaddr.sin_addr.s_addr = htonl(INADDR_ANY);
servaddr.sin_port = htons(SERV_PORT);
bind(sockfd, (SA *) &servaddr, sizeof(servaddr));
dg_echo(sockfd, (SA *) &cliaddr, sizeof(cliaddr));
}
Code:
//unp.h
#include "sys/socket.h"
#include <stdio.h>
#define MAXLINE 4096
/* max text line length */
#define SERV_PORT 9877
#define SA struct sockaddr
void dg_cli(FILE *, int, const SA *, socklen_t);
void dg_echo(int, SA *, socklen_t);
View 1 Replies
View Related
Jul 9, 2009
I'm having a strange issue with a RHEL 5.2 system with SE Linux. I can scp files to it, but I always have to hit ctrl+c to end the scp process. The file transfers 100% and everything, but scp just hangs there for a long time, or until I kill it. If I wait until it dies on its own, its exit value is 1. I'm not sure if it'll help, but here is the output when I add the verbose option. $ scp -v create_users.sh rhel5.2-server: Executing: program /usr/bin/ssh host rhel5.2-server, user (unspecified), command scp -v -p -t .
OpenSSH_4.7p1 Debian-8ubuntu1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[code]...
View 2 Replies
View Related
Nov 15, 2010
I have a 500gB USB drive connected to my laptop for backups and filestorage. But I can't get it to play nice with Midnight Commander. My transfer speeds max ut at 2MB/s wich is painfully slow when moving large files such as movies. Worker FM transfers the same files to the same drive much MUCH faster (not sure by how much, though). This leads me to the conclusion that the problem lies with MC.
View 5 Replies
View Related
Nov 17, 2010
In my laptop with debian-lenny OS I have a number of ripped dvd movies some of which are about 2.5GB. I have transferred those with less than 2GB (that is the size of my usb-flashdrives) to my netbook (with opensuse-11.3 OS) with the help of usb-flashdrives. Is there any method of tranferring the larger files by connecting the two machines by ethernet cables with usb ports and using some software packages?
View 7 Replies
View Related
