Ubuntu Installation :: Windows Boot From Disk Error - Logo Glows Freezes And Nothing Happens

May 22, 2010

I'm trying to install ubuntu from a disk I got with a Ubuntu manual magazine, but once I choose the install option, the logo glows for a couple minutes then freezes and nothing happens. The same happens for running it without installation. Does anyone know what I should do? I'm currently downloading it onto a USB stick to attempt to boot it from that.

View 4 Replies


ADVERTISEMENT

Ubuntu Installation :: Error 29: Disk Write Error Then Trying Again Windows Seems To Boot But It Takes Much Longer

Aug 17, 2010

i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.

Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.

Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.

[Code]...

View 3 Replies View Related

Ubuntu Installation :: Boot Disk Loads But It Freezes After The Loading Dots

May 26, 2011

tried to install 11.04 using wubi and wouldnt work so created a boot disk and did it that way: the boot disk loads but it freezes after the loading dots

View 6 Replies View Related

Ubuntu :: Windows 7 Won't Boot - Displays Windows Logo And Then Drops Back To The Grub Menu

Jan 9, 2010

I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?

View 9 Replies View Related

Ubuntu :: Dual Boot - Windows - Grub Hard Disk Error ?

Oct 1, 2010

I have a dual boot System with Ubuntu 10.04 Netbook Remix and Windows XP SP3 on an Asus eeePC 1000HE. I had some troubles with updating kernels etc. and I ended up with following problem:

After grub reinstall, I am able to boot Ubuntu, also I can mount the windows partition properly. Trying to boot into Windows, I get the error:

Code:

It's all on one hard drive which doesn't show any errors:

Code:

Partition table entries are not in disk order

Code:

Some partitions don't show a file system because they are luks-encrypted.

As I mentioned earlier, I am able to mount sda1. I think the problem is that the Partition Boot Sector is corrupted, even though I am not sure if the ntfs partition is damaged at all or if GRUB is the problem.

As I said I had problems with a kernel update and therefore had to reinstall GRUB. I think, but I am not sure, that I accidentally installed GRUB on sda1 (the windows partition) instead of on sda. After I installed GRUB on sda again, I was able to boot linux and fixed sda1 with testdisk. Before, sda1 showed as four partitions (sda1p1, ... , sda1p4). I was not able to mount sda1 till I fixed it with testdisk. testdisk says the Boot Sector of sda1 is OK, so does ntfsfix.

Finally, an extract from my /boot/grub/menu.lst:

Code: ...

The Windows XP entry is added by myself. I don't know much about grub, so there might be the error.

I tried to keep it as short as possible (this is only the end of the story), I hope I didn't forget anything important. Please ask if there is something not clear.

I am in Tanzania with this netbook, so it is not possible to boot Windows CD and fix the windows partition with it, also I don't have a very fast Internet connection.

Is there a way to fix this without a Windows CD? Maybe it is just a dumb mistake in the menu.lst?

View 9 Replies View Related

Fedora Installation :: Boot From Installation DVD - IsoLinux: Disk Error 80 , AX = 42A7 , Drive 9F Boot Failed

Oct 20, 2010

I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.

View 3 Replies View Related

OpenSUSE Install :: Disk Read Error - Can't Boot Windows ?

Apr 8, 2011

I have multi-version Kernels on a Dual Boot WinXP / openSUSE 11,3 box. It's been a LONG time since I needed to boot to Win XP and now that I find that I can't get to it, I can not say for sure what I did to break it. Looking back, I suspect that the method I used for the recent removal of one of the Kernel versions may have been innappropiate. Rather than unchecking in versions/package groups I may have just removed the unwanted kernel in the package list. Not sure. I've tried dinking around with menu.lst and Yast Boot Loader to no success. I get errors depending on what I messed with. Didn't try to reinstall grub until I checked here for help with a fix.

Here's some info:

Code:

View 9 Replies View Related

Ubuntu Installation :: Boot Error / Failed To Find Boot Disk

Sep 1, 2010

I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.

View 8 Replies View Related

Ubuntu Installation :: Disk Error On /boot With Dual Boot On Dual Disk

Dec 30, 2010

I have a (slightly complicated) dual/multi boot system.

I keep getting boot errors (when choosing ubuntu from the grub2 menu)

Code:
Serious errors were found while checking the disk drive for /boot

If I switch off and restart, ubuntu will then start without issue.

My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.

I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).

This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.

View 2 Replies View Related

Ubuntu Installation :: Can't Get Further Then The Logo In The Boot Process?

Jan 2, 2010

I got a problem. At the day of New YEar, i got a virus, that my antivirus big time. When i started Windows, i instantly got BSoD. I managed to format my HDD, and now i wanna try to install Ubuntu. It has been working before, but after an update, I can't get further then the logo in the boot process. Now, I don't have any OS. Ubuntu & Kubuntu both just gives me the logo/loading screen, and then goes black..

windows 7 also just goies to "Starting windows"... Prretty annoying.

Think i got 3 GB RAM, 950gb HDD, and 2x 128 MB ATI X-Fire video.

View 2 Replies View Related

Ubuntu Installation :: Windows Installer - Error Message - There Is No Disk In The Drive

Aug 26, 2010

I tried using the Windows installer, after not having success burning the ISO to cd, and I received another error message. "There is no disk in the drive. Please insert a disk into drive. DeviceHarddisk3DR3"

View 9 Replies View Related

Ubuntu Installation :: Restore Wubi After Windows Reinstall - Error: No Such Disk

Jul 4, 2011

I decided it was time to reinstall Windows 7 because it became increasingly slow. I know that there's a different solution to solve this problem, but as a user I'm just more satisfied with the noob friendliness of Windows. However, I know that it has its drawbacks so I had a dual boot setup with Wubi (30GB). My old configuration was as follows:

C: partition of size ~80GB with Windows 7 x64 installed
D: partition of size ~400GB with data and a wubi ubuntu at D:/ubuntu

So what I did was this:

- Backup all my personal files and D:/ubuntu on a external hdd
- Wipe the partitions using the windows installer
- Create a C: of 100GB and a D: of 380GB
- install windows 7 x64 on the C: partition

Now I would like to restore my backup of the old D:/ubuntu to a working dual boot system. I realize I may have missed some opportunities and the data may be gone, but I only found out about that when it was too late. I have tried installing wubi, and replacing the new ubuntu folder with the old one, but this did not work.

error: no such device: 9054698454696DC2
error: no such disk

I have also tried replacing only the root.disk file, with the same result. I searched for other people's solutions, but they did not seem to work in my case.

View 8 Replies View Related

Ubuntu Installation :: 9.10 Fails To Boot With 'No Such Disk' Error

Jul 18, 2010

I've installed Ubuntu Server V9.10 (64-bit) on a brand new server I built with no previous OS installed. The drives are two Hitachi 1 Tbyte hdd's configured as RAID1, an ASUS M4A78T-E motherboard with an AMD Phenom-II cpu with 8 Gbyte of memory. I updated the bios following building the computer. The Ubuntu 9.10 server installation appears to go without error. However, on reboot I get the message:

Grub loading
error: no such disk
grub rescue

I suspect the MBR is missing or Linux is not pointing to the correct drive in the grub.cfg.I've made sure the boot order is correct, but other than that I don't really know the commands or syntax to troubleshoot this problem. The only CD I have is the Ubuntu 9.10 server ISO I downloaded and burned to dvd.

View 1 Replies View Related

Ubuntu Installation :: Fails To Boot With 'No Such Disk' Error?

Feb 1, 2010

I've installed Ubuntu Server V9.10 (64-bit) on a brand new server I built with no previous OS installed. The drives are two Hitachi 1 Tbyte hdd's configured as RAID1, an ASUS M4A78T-E motherboard with an AMD Phenom-II cpu with 8 Gbyte of memory. I updated the bios following building the computer.

The Ubuntu 9.10 server installation appears to go without error. However, on reboot I get the message:

Grub loading
error: no such disk
grub rescue

I suspect the MBR is missing or Linux is not pointing to the correct drive in the grub.cfg.

I'm a noob to Linux. I've made sure the boot order is correct, but other than that I don't really know the commands or syntax to troubleshoot this problem.

The only CD I have is the Ubuntu 9.10 server ISO I downloaded and burned to dvd.

View 1 Replies View Related

Ubuntu Installation :: Disk Error Message During Boot In 10.04

Jun 25, 2010

After updating my motherboard BIOS, I'm now getting these error messages every time I boot up:

[ 16.157447] ata3.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 16.157488] ata3.00: failed command: SET FEATURES
[ 16.157525] ata3.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0

[Code].....

I've got a 200GB hard drive, using an ECS SiS 755 A2 motherboard w/1.1b BIOS.

View 1 Replies View Related

Ubuntu Installation :: Dual Boot Full Disk Encryption - Windows 7 And 9.10

Feb 13, 2010

I've been wanting to do this for a while and after upgrading some of my pc components I decided I would finally try to dual boot with full disk encryption on both windows 7 and Ubuntu 9.10. I managed to encrypt the windows drive with truecrypt and that worked. I installed Ubuntu 9.10 using the alternate cd and everything but /boot is in an encrypted LVM. Each OS is on a separate SATA drive the windows is on sda1 and ubuntu /boot is sdb1.

To setup the dual boot I started out following the tutorial [url] but its for XP and versions of ubuntu that use grub not grub 2. I ran dd as posted and saved the files it produced from truecrypt. I then ran into some problems with grub reinstallation so I simply reinstalled Ubuntu 9.10 from scratch again. This put grub 2 on the computer. I've managed to get it to add a Windows 7 option.

However, when the option is selected truecrypt comes up and says that the bootloader is corrupted and that I need to use the repair CD I burned before I encrypted the drive. My question is does anyone have any experience dual booting using Truecrypt on Windows 7 and LUKS/dm-crypt on Ubuntu 9.10 with grub 2? And how would I get the boot menu to work? I'd rather not reinstall but if I have to I have images from right before I encrypted so it wouldn't be the end of the world.

View 4 Replies View Related

Ubuntu Installation :: Windows Boot Disk Won't Recognize Empty Partition / Fix It?

Nov 16, 2010

I've had Ubuntu 10.10 installed for a while and I recently cleared a partition to install Windows XP. However, when I load from the Windows XP boot CD, I get "7379one MB disk 0 at ID 0 on ?Bus 0 on atapi(Setup cannot access this disk)". I've tried just about everything

View 4 Replies View Related

Ubuntu Installation :: 10.04 Disk I/O Error At Boot But XUbuntu Works

May 23, 2010

I can't get Ubuntu 10.04 to boot for install (to my desktop), it displays the logo then hangs for about a minute and displays the alert dialouge saying "Boot disk error."I've tried multiple CD-Rom drives, burned from multiple computers, with both the desktop and server downloads. I'm down about 10 CDs and 2 DVDs here I've checked their integrity (md5) as well as checked the disk integrity from another computer (laptop) and everything passed. I got xUbuntu to install effortlessly, so I don't know what's causing the problem for Ubuntu. I can even look at the contents of the Ubuntu Server CD from within xUbuntu -- so, I know the disk really should work.

My system specs are pretty basic:

2 x Xeon 2.0Ghz
Tyan S2720 Motherboard
2 Gig (4x512) ECC PC266 RAM

[code]....

why xUbuntu worked and regular Ubuntu won't, and/or maybe what I can do to fix this?

View 7 Replies View Related

Ubuntu Installation :: Invalid System Disk On Boot Error?

Jun 17, 2010

I am a long time Windows user and attempting to install Ubuntu Netbook 10 on my Acer Aspire netbook.I followed the steps:1) Downloading the Ubuntu ISO to my netbook hard drive.2) Installed Ubuntu from the netbook HD to USB using USB universal installer (also using the universal installer to format the USB)3) Set bios to first read USB deviceI receive the following message during the boot "Invalid system disk. Replace the disk, and then press any key.I have retried this process several times.

View 2 Replies View Related

Ubuntu Installation :: 10.04.1 Install Fails To Boot - Out Of Disk Error

Dec 27, 2010

Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>

I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem?

View 9 Replies View Related

Ubuntu Installation :: NVidia Logo Showing Up At Boot After Upgrading From 10.04 To 10.10?

Oct 17, 2010

Yesterday I upgraded from 10.04 to 10.10 (x86_64). The upgrade itself succeeded, but now just before the login screen appears there is an almost fullscreen nVidia beta logo showing up. With 10.04 it did not.

Driver version is 260.19.06, graphics card is a GeForce GTS 250.

How can I hide the logo? I can't find a setting for it in the nVidia X server settings.

View 5 Replies View Related

Ubuntu Installation :: Error Loading "OAFIID:GNOME_NetstatusApplet" - Freezes Windows In Lucid?

Apr 29, 2010

After a fresh install of Lucid I found this error on my screen "the panel encountered a problem while loading "OAFIID:GNOME_NetstatusApplet" do you want to delete it?" I kept pressing no and having a completely worthless system. The programs were all opening in the left corner with no controls to move or close them.

View 1 Replies View Related

Fedora Installation :: Dual Boot With Windows 7 On Same Hard Disk?

May 25, 2011

Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;

One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /

[code]...

View 14 Replies View Related

Ubuntu Installation :: Installed But Gets Error Message- DISK BOOT FAILURE?

Feb 27, 2010

I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.

View 9 Replies View Related

Ubuntu Installation :: Dual-boot `GRUB Hard Disk Error'

May 9, 2011

My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.

I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.

View 9 Replies View Related

Ubuntu Installation :: Xp And - Netbook Dual Boot - Error - Windows Boot Failed

Jul 8, 2010

I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.

In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.

Since then, Ubuntu has become updated to 10.04, which I now cannot install.

The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.

I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.

After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!

When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.

I'm really lost here! It seems when I fix one problem, another problem arises!

Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".

View 1 Replies View Related

Ubuntu Installation :: Initial Boot On System - GRUB Rescue - Error: No Such Disk

Feb 11, 2010

I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -

GRUB loading. error: no such disk grub rescue>

I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.

View 4 Replies View Related

Ubuntu Installation :: 10.04.1 Install Fails To Boot -> Error: Out Of Disk, Grub Rescue

Jul 13, 2011

Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message

error: out of disk
grub rescue>

I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?

View 3 Replies View Related

Debian Installation :: Windows Get Stuck On Logo Screen Or Safe Mode Loading Files

Nov 19, 2014

Naturally a Windows user, because all of my computers were with pre-installed Windows and I was young.. and I get used to it..In the time of.. growing up I became programmer and learnt how bad is actually Windows coded. Not only that.. Linux has better support for developers.So.. I was Windows user till yesterday. I finally decided to work on Installing Linux or more specifically - Debian.I love everything part of the GNU - GIMP, GTK+, Gedit, GCC...

Well I can't use my PC, both of my operation systems are non-functional.Windows get stuck (which is something completely typical for Microsoft stuff) on Windows logo screen, or safe mode loading files..Debian installation is messy.Firstly I installed Debian 6.0 on a Virtual DVD Disc mounted. I followed the installation process strictly and move forward to Debian startup.It asked me for account. root as "username" and the password as "password" didn't work so I logged in as "localhost" normal user.

However.. I started to realize that I actually also had to install the Graphical Environment in order to have Debian with the desired GNOME Desktop.. I went to aptitude to install the Graphic Environment Package but it said that I have no root rights.. I tried to log-in again, using the correct details but failed.I tried to get in, using the sudo command, but the sudo command also didn't work. Of course.. since I can't install packages, I can't either install sudo."su -" or "su" also prompt me to select a password which I apparently have no clue of.

Then I went to Debian Recovery, because there I was logged as root. It also pointed out that "Root Account is locked". I went to install packages finally.. But when the installation started to proceed It asked me for disk insertion in a specific folder?There I got lost completely.

View 12 Replies View Related

Fedora Installation :: On Macbook Quadruple Boot - Error "no Bootable Device Insert Boot Disk And Press Any Key"

May 13, 2010

Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved