Ubuntu Installation :: Partitioner Window Empty On Install?
Jan 16, 2010
I am struggling to figure out why I cannot get Ubuntu to install. I boot my machine and run LiveCD and I can see me 36G raptor in GParted or partitioner or under Places but when i try to install 9.1, there is no drive after the keyboard layout in partitioner. Can anyone please shed some light on this. I have changed sata ports but that didnt help either. I don't understand how it would be a driver issue if I can see the drive and partition it.
View 9 Replies
ADVERTISEMENT
Jan 11, 2010
I am having a problem with Installing Ubuntu 9.10 on My desktop. I have burnt the disc at the slowest speeds possible, and tested it on my alternate PC's, and it works. Not only, I have extensively tested the disc to verify it's integrity. So it ISNT the disc. It is a component of my Main Desktop that is causing the issue, I am of the thought it is my IDE hard drive.
Firstly, My Specs;
CPU: Intel Q9550 Quad Core (Running at an Overclocked 3.4ghz)
Motherboard: ASUS P5QL PRO P45 Chipset , 1600 FSB , etc
RAM: 3gb of DDR2 Team Elite RAM (running at 667 in Win 7)
Hard Drives: 500gb Western Digital ECO Sata Drive (Win 7 System Drive) and an IDE 250gb Western Digital drive reserved for Linux (I have coded a boot manager to switch between the two)a DVD-ROM drive is on the other channel of the Single IDE port on the Board
Video Card: ASUS/Nvidia GTS250 1GB
I think that covers all the vital hardware.
My problem is that when i boot into the live CD, and attempt an install, the installer freezes at the point of setting up the partitioner/scanning drives, at 47%. SO, the partitioner does not get a chance to start.
I have a gaming system, and it has all the latest gear, i7, 16gb ram, etc and it installs on that (i plugged in a resh drive to test)
This system I am trying to use ubuntu on is my MAIN system, I use it for study (PhD Science...science geeks rule!) and I am attracted by ubuntu's features, especially for scientists.
View 5 Replies
View Related
Aug 13, 2010
Trying to install Ubuntu 10.04 on a HP 6540b laptop - dual boot with Windows 7. I keep getting stuck on:
1. [GUI install] after step 3 of 7 where a KB layout (I've tried many other layout) is selected then going next and it hangs there trying to do something.
2. [Alternative install] stuck on 45% of scanning disks at "Starting up the partitioner" code...
I've tried desktop 32bit and 64bit install and also alternative 32 and 64. Also tried installing from CD & USB drive.
I guess it's something to do with the disk partition? Anyone come across this before?
I've installed 10.04 with similar dual boot partitions layout on an older HP 6710b without any issues.
View 1 Replies
View Related
Feb 22, 2011
I tried to install Ubuntu 10.10 Server 32bits and 64bits but each time the installer stopped at 45% during "Starting up the partitioner" with the message "Scanning disks".
I installed Windows 7 64bits on the disks without problem.
I installed IPCop 1.4.20 successfully.
However, I tried to install Fedora 14 32bits and 64bits but it also stopped (ie crashed the partitioner) during the "Install To Harddisk" via LiveCD.
Similarly, OpenNode 1.0 also crashed with a bug report that has alot of python error messages. All mean nothing to me.
I even tried to partition the disks first via Fedora 14 LiveCD. Still the same thing.
Has anyone encountered this sort of problems before? If so, any resolutions?
Could this be the problem with the SATA2 disks?
View 7 Replies
View Related
May 2, 2011
I have a weird issue about url-handling: When I have an url in any application, and click it, firefox opens up in a NEW window, but does NOT open the url, instead the ubuntu-startpage...
This is totally against my settings: firefox is the default browser, and is set to open url's in a new tab. So, I have checked stuff in about:config, and even tried making an entire new profile. Checked evolutions settings, but too bad, nothing there.
View 1 Replies
View Related
Jan 27, 2010
I have a single SATA hard drive, not raided, with an XP partition on it. /dev/sda. I've already created an 18GB ext4 partition for Ubuntu and 2gb swap partition as well. For some ridiculous reason the Ubuntu 9.10 isn't even showing /dev/sda as an option to install to!
fdisk -l clearly shows /dev/sda there, and i gparted /dev/sda works like a charm. So why is the installer being so silly and not even allowing me to select it? And I can't go back and choose manual mode or anything, the installer jumps right from Timezone Settins into this partitioner screen. Here is a screenshot of fdisk -l clearly seeing the drive fine, yet the installer not showing it at all. This is one of the things that drives people away from Linux.. It never TELLS you what the problem is
View 2 Replies
View Related
Apr 26, 2010
I just bought a new desktop. I want to set it up as a dual boot windows/ubuntu. I installed my copy of XP on it with no problems. When I ran the Ubuntu 9.10 amd64 installer, the drive partitioner keeps coming up blank. There is no drive map, and all of the controls are faded out. I tried it with just windows on the hard drive first. Then I used GParted to reduce the size of the windows partition and make the rest into an ext4 file system. Same result. I had no problems with this on my Vista/Ubuntu laptop. If anyone has any idea what I'm doing wrong
View 1 Replies
View Related
Feb 17, 2010
i have a strange problem while trying to install Ubuntu 9.10 64bit (also tried with x86 - no luck).My system specs : Motherboard : ASUS P5B VM SE (PATA : JMB368 / Intel ICHHD : Seagate SATA II 3GBit 320 MB (connected in SATA port 1)CPU : Intel Core 2 Quad 2500 GHzI must state i installed Windows 7 without a problem. After that, i tried to install Ubuntu 9.10, first 64bit then x86 but in every case the setup starts, i select language / location etc and when the partitioner starts i see no hard disk drive. Same happens if i try the alternate install cd.
I must mention here that if i click on "Exit" and access Ubuntu Live CD desktopm i can go System >Administrator > Disk Utillity and GParted. In both utillities my HD shows up just fine. So what could be the problem ??? I tried starting ubuntu with pci=nommconf irqpoll -> no luckHere is the lspci output :
ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G965 Integrated Graphics Controller (rev 02)
[code]....
View 9 Replies
View Related
Dec 18, 2010
I'm a complete noob trying to install Ubuntu Server 10.10 on my first build for use as a file/media server.When I get to the step to partition the drives, the installation freezes. The screen says "Starting disk partitioner" and the progress bar stops at 45%. It has done this three times now, and the longest I waited for it before rebooting was over an hour.I am installing from a flash drive containing the .iso file, and I have the following hardware (in case that matters): asus p7h55-m pro mobo, core i3-540 CPU, 2x4GB ram, WD caviar green 1.5TB, WD caviar green 1TB, and Kingston 8GB SSD.
View 6 Replies
View Related
Feb 22, 2011
I just got OpenSuSe 11.3 installed in a machine with two 160GB drives. I took all defaults at installation, works fine. Going to YaST expecting to detect and partition it. Not there. System Information, however 'sees' both disks. How do I partition and attach this disk?
View 9 Replies
View Related
Jul 17, 2010
i remember back a few years ago you could partition the drive by simply sliding a slider, and now trying to install ubuntu next to xp my dad was unable to set it up. This is a big step back for the design of the partitioner. He was able to set up ubuntu 7.04 on his old computer many years ago when i was not there. He tried to set up 10.04 today and got so frustrated with ubuntu wanting to take most of his drive, that he gave up. why was the "simple slide to set space you where going to give ubuntu" taken away. he just wants to set up the space he didn't want to deal with root, swap space, and so on. he just wanted to set up a block of space that ubuntu can use however it wants. but the partitioner will not let him. this needs to be fixed. the install process must be simple to use by everyone. i do not want my friends and family getting frustrated with installing it. he was excited to try the new ubuntu till he got to dealing with the partitioner and after that he wanted nothing to do with ubuntu. the installer is the first thing they see make that the primary focus of "easy of use".
View 3 Replies
View Related
Mar 26, 2010
I gave upon 11.3 M4.Tried installation by text mode but there's another screen showing various USB devices status superimposing on the Linux text install. Returned to Live installation via Live CD. Installation completed > restart >autoconfig failed. Tried live installation again but Suse kept suggesting installing into one of the empty 2 Gb partitions. Also had problems with Gparted Live 0.5.1-1 CD because somehow the keys froze. Had to replace it with 0.5.2-1. I am installing 11.2 on a laptop but right now I am stuck with frozen "Creating cache files for fontconfig". This has taken over an hour and nothing seems to be happening. I have successfully installed openSUSE 11.2 on an older laptop and a desktop. Also experienced installing Windows 7, Ubuntu and PC-BSD on both types of machines.
View 9 Replies
View Related
Oct 6, 2010
I went to install the 10.10 RC yesterday but to my surprise when I got to the partitioning stage it showed up my drive as being blank, with no existing partitions.
Has anybody else had this issue? I'm not sure what to do as I had the same issue on the beta, I just assumed it would be fixed.
I have a 500GB Sata HDD and i'm running an AMD64 processor so the RC was the amd_64 version.
View 3 Replies
View Related
Jun 18, 2011
I am installing 11.04 on a test PC. My standard drive layout, developed over many years and many distros is as follows:
sda1 /
sda2 /home
sda3 swap
sda4 /data
/ and /home are relatively small. I put most data files on /data to facilitate hot backup of important data to another drive or machine.
/ and /home are periodically cold backed up with g4l. That said...I noticed that the install partitioner in 11.04 only allows me to select from a list of mount points. / home var etc. I can not type in a mount point of my liking as I have done since I started using Ubuntu about 6.4.Is this Canonical's idea of an improvement?Yes I can manually format the /data partition after install and add it to /etc/fstab. Still I would give Canonical three thumbs down on this enhancement.
p.s. The above seems to be a moot point as the installer refuses to install the boot loader. I have filed a bug report. It makes no difference if I partition the disk manually or allow the installer to partition it to its defaults. If it ain't broke, break it.
View 9 Replies
View Related
May 1, 2010
The hard disk is seen in the BIOS.
The partitions on it are accessible via the Places Menu on the Lucid Live CD.
It's just when I try to install, nothing is detected in Step 4 of 8, "Prepare Partitions".
An old 80GB IDE disk, on the other hand is seen by the partitioner.
I am not using RAID and it is not enabled in the BIOS.
View 4 Replies
View Related
Sep 12, 2015
I just bought a new HP desktop, and I want to install Debian on the hard drive. I ran the Windows program on the Debian CD to start the install.
I selected Manual drive setting, and resized the large C: partition to 50 GB. I want to install Debian in some of the free space, only their isn''t any free space! The 400+ GB I took out of the C: partition is labeled "unusable" instead of "free space."
If I double click the unusable space, I am just given the cylinder/head/sector numbers. How I can make that space usable?
I would boot my Gparted CD, but I don't know how to get to the BIOS. The boot screen goes right to Windows without showing me the key to get to the BIOS. I tried hitting DEL, but to no effect. Do you know what the HP computers use to interrupt the boot?
View 4 Replies
View Related
Aug 17, 2011
At 50% exactly, the installer stops at this point. If I press Alt+F4, the last line states "partman-lvm: No volume groups found". I've tried the full CD install and netinstall. Both the same error. This notebook (a Dell Inspiron z11) i bought it from a friend and he had previously installed Ubuntu on it (he actually had aual boot with Ubuntu and M$.Win.7)When he asked me if I wanted the notebook like that I told him to format the whole HDD so I could install Debian from scratch. So i thought "Maybe my friend screwed up" So I boot up with GParted and reformatted the whole drive on Fat32.
Went back to boot with the netinstall, and got the exact same error. So, after that, I boot my bro's desktop with a Live Ubuntu CD to make the bootable USB (previous attempts were made on M$.Win). So, with this USB made on Ubuntu, guess what? Yes, sir, I got the very same error. I tried to install Ubuntu with the same USB (every time reformatting the USB before making it bootable) and the installation stops after i select the key map. I press quit, and it sends me to the Live version, no problems at all (except that it does not accept the password for my wireless network) Maybe I'm doing something wrong? I've used Universal-USB-Installer-1.8.6.1, tuxboot-windows-25 and unetbootin-win-549 to make the USB bootable with the Debian netinstall, all with the same results.
View 2 Replies
View Related
Jul 7, 2010
Cant install Wubi on window 7
View 8 Replies
View Related
Oct 20, 2010
as per the title - after a hard disk failure got new disk and attempting dual boot of xp and 10.10 - had to burn 10.10 twice to get it to complete the install process, but thats another story - basically on logging in there is now gnome panels - i get my 'low battery' warning etc and the login music but thats it - it does work in 'safe mode' though - what can i do to correct this?ironically had exactly same problem on the upstairs desktop when upgrading to 10.4 but buggered if i can remember how i fixed it - even checked my previous posts on it.
View 9 Replies
View Related
Dec 22, 2010
how to install on window 7?
View 3 Replies
View Related
Feb 15, 2010
I would like to install window xp which have been corrupted for some reasons.Fedora10 is working fine on my PC.I try to install window xp from cd,it shows only first two steps.Can you tell How can I install window xp on my system.
View 5 Replies
View Related
Mar 21, 2010
I was thinking of trying out the UEFI support that HP has in my laptop BIOS in the next few days. My reasons is that I get a custom boot logo... and (hopefully) a better boot-speed. What is the current state of affairs with the openSuSE UEFI/EFI install support on a empty hdd for x86_64 does anyone know? (badly worded I apologize) This may seem naive but I have struggled to answer this with most posts being about Mac's for obvious reasons.
Specifically, Do I have to have any custom knowledge on formatting the HDD with a GPT partitions or does the installer do this for you? Secondly, How well does the UEFI bootloader tie in with the config tools in YaST2? (I would like to have UEFI but if it turns into some headache in setting up the boot area by hand each time the kernel updates I will forget it.) I can safely say this will be a machine with only openSuSE installed as an OS, no need for any others or any dual-boot problems. This isn't overly urgent and I will dedicate (at least) a whole weekend to tweaking once I buy a new disk and install openSuSE on it. If nobody knows then I will dive in head first and report how I find it and any problems (and severity).
View 7 Replies
View Related
Sep 26, 2009
I'm having an issue installing Fedora 11 on my system. After the install, I remove the DVD media, reboot the system, and it reports an error stating that Windows cannot start, missing or corrupted hal.dll file. I appologize if this is a common problem or has already been answered. My searches haven't yielded helpful information, mostly what I've found is people attempting to setup dual-boot machines or boot Fedora via the Windows Boot Loader.I have experience in computers, although I am completely new to Linux/Fedora. Through my work, I have experience using AIX, but no experience installing or managing drive partitions.The system in question is a 5 year old Windows XP system that I built myself. The system has two drives (C: and D: in Windows). The C: drive was the Windows install drive and the D: drive was added later for additional storage. I am attempting to completely overwrite Windows on this machine. I want it to single boot into Fedora 11, I am not looking for a dual-boot system. The system will become a network file server.
The specs of the system are...
Processor: AMD Athlon 64 3500+
Mobo: Gigabyte GA-K8NSNXP-939
RAM: 2GB
I downloaded the DVD iso for Fedora 11 x86_64 via Bit Torrent, burned the ISO to DVD and booted the system from DVD. I ran through the install (Anaconda 11.5.0.59) and see the following information on the screens..
View 2 Replies
View Related
Dec 27, 2009
I've been searching for tutorials on how to install awesome, it would be nice if someone can guide me on how to install Awesome Window Manager.
View 2 Replies
View Related
May 23, 2010
I want to properly install Unbuntu on my multi boot pc. I would like to install to E partition which is currently ntfs. I have never installed Linux. What drive should the boot loader go? I can format E partition during install? Does it still need a swap file partition? If so, can that be made from E partition? How big? I'd like to have a boot menu to choose Ubuntu or a choice that takes me to the windows boot loader. Would that boot loader get wiped if I did a fresh install of 7 to the I drive? Also, what would be the proper way to upgrade Ubuntu? I see a lot of post where people are doing it wrong.
Here is my drives layout. Should install Ubuntu to my SSD J drive instead? I tried the live CD. Seems to work well. I have a Asus Max Formula MB, Phenom II 6core, ATI 4870. MB has a built in Via sound card. Not sure if that was working.
View 1 Replies
View Related
Apr 4, 2011
What's the "Force to be primary partition" in Fedora partitioner? At least it doesn't work for me, it only uses primary partition using Fedora XFCE Live CD ( the only one that I checked that ).
View 5 Replies
View Related
Aug 30, 2010
During 10.04 install I ran into an error every time I tried to install packages, so I just skipped the step figuring I'd do it later.Boot up, nothing but the cd in /etc/apt/sources.list. Does anyone know where I can find the default sources.list?
View 2 Replies
View Related
Mar 24, 2011
Currently I have ubuntu 10.04 LTS as the only OS.I have two partitions one for ubuntu and it is ext by default for ubuntu's files.The other is empty NTFS. (yes, it is formatted in NTFS but I haven't saved anything yet on it).The problem is: I want to install win xp sp3 on this empty ntfs partition safely (without losing ubuntu).My friend told me ubuntu will be lost even if I didn't touch its own partition.
View 5 Replies
View Related
Jun 18, 2011
I am installing 11.04 on a test PC. My standard drive layout, developed over many years and many distros is as follows:
sda1 /
sda2 /home
sda3 swap
[code]....
View 6 Replies
View Related
Feb 21, 2010
I have removed the trial of win 7 and want to use the empty space for Ubuntu 9.10, [46gb]. Opening disk utility shows 60gb hard drive, divided into system reserved 105mb, 46gb file system [Linux ext4 [version 1]], 13gb extended [contains no logical partitions], 13 gb [Linux ext4 [version 1]], 617mb swap space.Because I have given the 46gb space the same name as the 13gp space i.e. [Linux ext4 [version 1]],will this now be used By Ubuntu for data storage or do I need to do a complete re-install?
View 6 Replies
View Related
