Ubuntu Installation :: 10.04 Install Stuck Before Start Of Partitioner / Solve This?

Aug 13, 2010

Trying to install Ubuntu 10.04 on a HP 6540b laptop - dual boot with Windows 7. I keep getting stuck on:

1. [GUI install] after step 3 of 7 where a KB layout (I've tried many other layout) is selected then going next and it hangs there trying to do something.

2. [Alternative install] stuck on 45% of scanning disks at "Starting up the partitioner" code...

I've tried desktop 32bit and 64bit install and also alternative 32 and 64. Also tried installing from CD & USB drive.

I guess it's something to do with the disk partition? Anyone come across this before?

I've installed 10.04 with similar dual boot partitions layout on an older HP 6710b without any issues.

View 1 Replies


ADVERTISEMENT

Ubuntu Installation :: 9.10 Partitioner - 'Starting Partitioner' Freezes At 47%

Jan 11, 2010

I am having a problem with Installing Ubuntu 9.10 on My desktop. I have burnt the disc at the slowest speeds possible, and tested it on my alternate PC's, and it works. Not only, I have extensively tested the disc to verify it's integrity. So it ISNT the disc. It is a component of my Main Desktop that is causing the issue, I am of the thought it is my IDE hard drive.

Firstly, My Specs;
CPU: Intel Q9550 Quad Core (Running at an Overclocked 3.4ghz)
Motherboard: ASUS P5QL PRO P45 Chipset , 1600 FSB , etc
RAM: 3gb of DDR2 Team Elite RAM (running at 667 in Win 7)
Hard Drives: 500gb Western Digital ECO Sata Drive (Win 7 System Drive) and an IDE 250gb Western Digital drive reserved for Linux (I have coded a boot manager to switch between the two)a DVD-ROM drive is on the other channel of the Single IDE port on the Board
Video Card: ASUS/Nvidia GTS250 1GB

I think that covers all the vital hardware.

My problem is that when i boot into the live CD, and attempt an install, the installer freezes at the point of setting up the partitioner/scanning drives, at 47%. SO, the partitioner does not get a chance to start.

I have a gaming system, and it has all the latest gear, i7, 16gb ram, etc and it installs on that (i plugged in a resh drive to test)

This system I am trying to use ubuntu on is my MAIN system, I use it for study (PhD Science...science geeks rule!) and I am attracted by ubuntu's features, especially for scientists.

View 5 Replies View Related

Ubuntu Installation :: Partitioner Window Empty On Install?

Jan 16, 2010

I am struggling to figure out why I cannot get Ubuntu to install. I boot my machine and run LiveCD and I can see me 36G raptor in GParted or partitioner or under Places but when i try to install 9.1, there is no drive after the keyboard layout in partitioner. Can anyone please shed some light on this. I have changed sata ports but that didnt help either. I don't understand how it would be a driver issue if I can see the drive and partition it.

View 9 Replies View Related

Ubuntu Installation :: 10.10 Install Freeze At Starting Up The Partitioner - Scanning Disks / Sort It?

Feb 22, 2011

I tried to install Ubuntu 10.10 Server 32bits and 64bits but each time the installer stopped at 45% during "Starting up the partitioner" with the message "Scanning disks".

I installed Windows 7 64bits on the disks without problem.
I installed IPCop 1.4.20 successfully.

However, I tried to install Fedora 14 32bits and 64bits but it also stopped (ie crashed the partitioner) during the "Install To Harddisk" via LiveCD.

Similarly, OpenNode 1.0 also crashed with a bug report that has alot of python error messages. All mean nothing to me.

I even tried to partition the disks first via Fedora 14 LiveCD. Still the same thing.

Has anyone encountered this sort of problems before? If so, any resolutions?

Could this be the problem with the SATA2 disks?

View 7 Replies View Related

OpenSUSE :: YaST Partitioner Does Not Start - Launch It From Command Line To Get Some Output?

Jun 4, 2011

I have a problem with YaST Partitioner. When I launch it, a window opens, a dialog (to confirm that I know what I am doing) pop-ups, I choose "Yes", the application starts to initialize, and after 0.5-1s the window is closed without any error message. Does anybody know how to at least find out what is wrong? .. or how to launch it from command line to get some output?

View 8 Replies View Related

Ubuntu :: Screen Resolution Stuck After Power Outage / Solve This?

Feb 11, 2010

So yesterday, I my power went out on my desktop and when I rebooted, the screen resolution was stuck at 640x480. When I go to the display settings, no other higher options are available. Any suggestions?

View 1 Replies View Related

Ubuntu Installation :: Can't Install U10.04 / Solve It?

Jun 8, 2010

Can't install Ununtu 10.04

I can not install ubuntu 10.04 32 or 64 bit on my computer

Every time I put in either DVD I get a guy and next to him is a regtangeler box, then the screen goes black with a blinking white line up to the left and then it goes completely black then monitor turns itself off

This happens with both 32 and 64 install versions

So how do I install it or just use it a s a live cd

I have a pretty new computer that I Run windows 7 on that I am trying to get Ubuntu on code...

View 7 Replies View Related

Ubuntu Installation :: Apt-get Install Hangs / Solve This?

Apr 4, 2011

I have installed Ubuntu 64bit 10.04 LTS version. I am trying to install open-iscsi and my apt-get install commands hangs code...

my sources.list seems to be fine. What might be the issue?? never had this issue on a 32 bit version of Ubuntu 9.

View 1 Replies View Related

Ubuntu Installation :: Can't Install Ruby On Rails / Solve This?

Mar 23, 2010

I'm trying to install ruby on rails on Ubuntu 9.10. I'm following the instructions on this site:
http://castilho.biz/blog/2009/11/05/...-karmic-koala/

However, when I try to install Rails I get an error code...

It seems like gem can't access http://gems.rubyforge.org/gems/rake-0.8.7.gem for some reason, but when I try to go directly to that address I get the option to download it. Any ideas how to get around this problem?

I'm thinking if I can somehow tell gem to look for the file locally I can download it and install rails that way.

View 3 Replies View Related

Installation :: Fedora Won't Install Into 4 GB / Solve This?

Jun 25, 2011

I usually don't have problems installing Linux but Fedora won't install into 4 GB for me. I get to the partitioner, try to create a 4 GB partition, actually have 7 GB free, but it tells me there is no space on the drive. As I said, I usually don't get this problem but have not tried Fedora before and don't understand.

View 3 Replies View Related

Ubuntu Installation :: 10.04 Install :1st SATA Port Not Recognized As /dev/sda - Solve This?

May 2, 2010

My computer has 2 HDDs attached to 1st and 2nd SATA ports of my mobo respectively, the 1st SATA drive is empty while the 2nd have my Windows Vista on it. I also have a Perc/5i RAID card with 2 RAID arrays defined.

I am going to install Ubuntu 10.04 x64 to the 1st SATA driver (I expect it will be /dev/sda), but when I try to install, I found my drives are recognized as below,

/dev/sda > 1st RAID array of my Perc/5i
/dev/sdb > 2nd RAID array of my Perc/5i
/dev/sdc > 1st SATA drive < I need to install ubuntu on this drive
/dev/sdd > 2nd SATA drive

I don't want to install 10.04 as /dev/sdc because I may add more arrays to my raid card which from my experience of 9.04, it will probably change the drive letter of my current /dev/sdc and then system will fail to boot.

Is there any way to force my 1st SATA HDD as /dev/sda during install ?

View 1 Replies View Related

Ubuntu Installation :: Can No Longer Install Windows On My Laptop / Solve This?

Jul 7, 2010

Synopsis: I wiped my system and am using ubuntu 10.04 with no problems *except* that I now need IE 8 and MS Excel/Access/Powerpoint/Word for classwork. I kind of tried toying with WINE, but ultimately would rather just have a dual boot.

What occurs when I try a (any) Windows install (keep in mind I even swapped out a fresh Sata HD and the same problem occured:

Pop in a Windows ISO bootable CD>everything acts normal and I follow the prompts for a fresh install (not an upgrade)> It begins the install but the first part where it is "copying files" just goes to 100% in a split second>Then it moves down to the next prompt of "Expanding Files" at which point the laptop is spinning the disc/reading it but it just stays at 0%.

So, it's not a HD formating problem, right? I wiped the system, reformatted and got the okay from Windows that I could install so I assumed I reformatted it back to NTFS.

View 2 Replies View Related

Ubuntu Installation :: 9.10 Installer & Partitioner Not Seeing Harddisk?

Jan 27, 2010

I have a single SATA hard drive, not raided, with an XP partition on it. /dev/sda. I've already created an 18GB ext4 partition for Ubuntu and 2gb swap partition as well. For some ridiculous reason the Ubuntu 9.10 isn't even showing /dev/sda as an option to install to!

fdisk -l clearly shows /dev/sda there, and i gparted /dev/sda works like a charm. So why is the installer being so silly and not even allowing me to select it? And I can't go back and choose manual mode or anything, the installer jumps right from Timezone Settins into this partitioner screen. Here is a screenshot of fdisk -l clearly seeing the drive fine, yet the installer not showing it at all. This is one of the things that drives people away from Linux.. It never TELLS you what the problem is

View 2 Replies View Related

Installation :: Ubuntu Drive Partitioner Is Blank / What To Do?

Apr 26, 2010

I just bought a new desktop. I want to set it up as a dual boot windows/ubuntu. I installed my copy of XP on it with no problems. When I ran the Ubuntu 9.10 amd64 installer, the drive partitioner keeps coming up blank. There is no drive map, and all of the controls are faded out. I tried it with just windows on the hard drive first. Then I used GParted to reduce the size of the windows partition and make the rest into an ext4 file system. Same result. I had no problems with this on my Vista/Ubuntu laptop. If anyone has any idea what I'm doing wrong

View 1 Replies View Related

Ubuntu Installation :: 9.10 - No SATA Drive In Installation's Partitioner?

Feb 17, 2010

i have a strange problem while trying to install Ubuntu 9.10 64bit (also tried with x86 - no luck).My system specs : Motherboard : ASUS P5B VM SE (PATA : JMB368 / Intel ICHHD : Seagate SATA II 3GBit 320 MB (connected in SATA port 1)CPU : Intel Core 2 Quad 2500 GHzI must state i installed Windows 7 without a problem. After that, i tried to install Ubuntu 9.10, first 64bit then x86 but in every case the setup starts, i select language / location etc and when the partitioner starts i see no hard disk drive. Same happens if i try the alternate install cd.

I must mention here that if i click on "Exit" and access Ubuntu Live CD desktopm i can go System >Administrator > Disk Utillity and GParted. In both utillities my HD shows up just fine. So what could be the problem ??? I tried starting ubuntu with pci=nommconf irqpoll -> no luckHere is the lspci output :

ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G965 Integrated Graphics Controller (rev 02)

[code]....

View 9 Replies View Related

Ubuntu Installation :: Disk Partitioner Freezes On Installation?

Dec 18, 2010

I'm a complete noob trying to install Ubuntu Server 10.10 on my first build for use as a file/media server.When I get to the step to partition the drives, the installation freezes. The screen says "Starting disk partitioner" and the progress bar stops at 45%. It has done this three times now, and the longest I waited for it before rebooting was over an hour.I am installing from a flash drive containing the .iso file, and I have the following hardware (in case that matters): asus p7h55-m pro mobo, core i3-540 CPU, 2x4GB ram, WD caviar green 1.5TB, WD caviar green 1TB, and Kingston 8GB SSD.

View 6 Replies View Related

OpenSUSE Install :: 11.3 Partitioner Not Detecting All Drives?

Feb 22, 2011

I just got OpenSuSe 11.3 installed in a machine with two 160GB drives. I took all defaults at installation, works fine. Going to YaST expecting to detect and partition it. Not there. System Information, however 'sees' both disks. How do I partition and attach this disk?

View 9 Replies View Related

Ubuntu Installation :: Doesn't Recognize Fedora For Grub On Install / Solve This?

Jan 23, 2010

First time this has happened. I installed Fedora first (XP already installed) and then installed Ubuntu 9.10 64. Fedora doesn't show up on boot up menu. I've tried update-grub.
Before I would have just edited menu.lst, but now?? I dunno.
edit; Here's fdisk with Fedora on sda6

View 9 Replies View Related

Install :: OpenSUSE 11.3 Black Screen During Installation / Solve This?

Jan 12, 2011

Configuration: AMD 2500+, 2GB RAM, ATI HD3850 AGP
Problem: Can not install OpenSUSE 11.3. Boot from the disc - the installation screen resolutions, modes of installation - everything is in order. But when the installation can proceed - loading (logo) and just a black screen - possibly the installation goes - but no picture. Also try to set mode "vesa" - loading equipment "ok" ... "ok" ... "ok" ... "ok" ... and again in the black screen.

View 9 Replies View Related

Ubuntu Installation :: Partitioner Lack Slide Control?

Jul 17, 2010

i remember back a few years ago you could partition the drive by simply sliding a slider, and now trying to install ubuntu next to xp my dad was unable to set it up. This is a big step back for the design of the partitioner. He was able to set up ubuntu 7.04 on his old computer many years ago when i was not there. He tried to set up 10.04 today and got so frustrated with ubuntu wanting to take most of his drive, that he gave up. why was the "simple slide to set space you where going to give ubuntu" taken away. he just wants to set up the space he didn't want to deal with root, swap space, and so on. he just wanted to set up a block of space that ubuntu can use however it wants. but the partitioner will not let him. this needs to be fixed. the install process must be simple to use by everyone. i do not want my friends and family getting frustrated with installing it. he was excited to try the new ubuntu till he got to dealing with the partitioner and after that he wanted nothing to do with ubuntu. the installer is the first thing they see make that the primary focus of "easy of use".

View 3 Replies View Related

Ubuntu Installation :: 10.10 RC Partitioner Doesn't Show Exisiting Partitions

Oct 6, 2010

I went to install the 10.10 RC yesterday but to my surprise when I got to the partitioning stage it showed up my drive as being blank, with no existing partitions.

Has anybody else had this issue? I'm not sure what to do as I had the same issue on the beta, I just assumed it would be fixed.

I have a 500GB Sata HDD and i'm running an AMD64 processor so the RC was the amd_64 version.

View 3 Replies View Related

Ubuntu Installation :: 11.04 Manual Partitioner - Cannot Enter Mount Point

Jun 18, 2011

I am installing 11.04 on a test PC. My standard drive layout, developed over many years and many distros is as follows:

sda1 /
sda2 /home
sda3 swap
sda4 /data

/ and /home are relatively small. I put most data files on /data to facilitate hot backup of important data to another drive or machine.

/ and /home are periodically cold backed up with g4l. That said...I noticed that the install partitioner in 11.04 only allows me to select from a list of mount points. / home var etc. I can not type in a mount point of my liking as I have done since I started using Ubuntu about 6.4.Is this Canonical's idea of an improvement?Yes I can manually format the /data partition after install and add it to /etc/fstab. Still I would give Canonical three thumbs down on this enhancement.

p.s. The above seems to be a moot point as the installer refuses to install the boot loader. I have filed a bug report. It makes no difference if I partition the disk manually or allow the installer to partition it to its defaults. If it ain't broke, break it.

View 9 Replies View Related

Ubuntu :: Start-up Suddenly Extremely Slow / Solve This?

Feb 10, 2010

I don't think any changes have been made to my laptop, but it suddenly loads Ubuntu extremely slowly. The time it takes to get from the Toshiba boot screen to the Ubuntu Log-in screen takes easily 20x as long.

Has anyone else been experiencing this kind of lag or have any ideas where to begin?

View 9 Replies View Related

Ubuntu Installation :: Lucid - 250GB Sata Hard Disk Not Detected By Partitioner

May 1, 2010

The hard disk is seen in the BIOS.

The partitions on it are accessible via the Places Menu on the Lucid Live CD.

It's just when I try to install, nothing is detected in Step 4 of 8, "Prepare Partitions".

An old 80GB IDE disk, on the other hand is seen by the partitioner.

I am not using RAID and it is not enabled in the BIOS.

View 4 Replies View Related

OpenSUSE :: Gparted Refuses Sometimes To Start / Solve This?

Oct 17, 2010

If I try to start gparted, sometimes it works fine, other times, it throws this error:

Code:
Could not initialise connection to hald.
Normally this means the HAL daemon (hald) is not running or not ready
I have tried manually starting hal daemon,but nothing happens.

View 2 Replies View Related

Ubuntu Installation :: 10.10 Install On Dell Inspiron Stuck

Oct 25, 2010

I am attempting to load 10.10-i386 on a Dell Inspiron. I have created my boot CD and all works fine with the install manager until it gets to the "Who are you?" page. It will not let me advance past this page. I am a complete rookie on Ubuntu and Linux OS.

View 5 Replies View Related

Fedora Servers :: Ejabberd Fails To Start In F-12 / Solve This?

Nov 23, 2009

Ejabberd fails to start in f-12. ejabberd-2.0.5-9.fc12.i686. This ran fine in f-10 and f-11. Getting a large number of strange error messages from the ejabberd log code...

Looks like it may be a permissions problem.

Anybody from the ejabberd community here that has gotten ejabberd to work on f-12?

View 1 Replies View Related

Ubuntu Installation :: Fresh Install Which Gets Stuck At Partitions Formatting 33%?

Feb 16, 2010

Having an issue with a fresh install which gets stuck at partitions formatting 33%. Tried different HDD's, 2 optical drives, 4 sticks of RAM, different SATA cable, disconnect floppy. Have tried both normal and alt cd images using different burn speeds.

View 5 Replies View Related

Ubuntu Installation :: 10.04 Clean Install Stuck At Keyboard Setup?

Apr 30, 2010

HP Pavillion m9340f.

View 2 Replies View Related

Ubuntu Installation :: 10.04 Install Stuck Step 3 Of 7 Keyboard Layout

Aug 12, 2010

I have acer aspire one netbook i'm using ubuntu 10.04 on my desktop but i wan't to install ubuntu on the netbook. i made usb installer ubuntu will run from the usb drive but when i try to install it gets stuck on step 3 of 7. wth? tried over and over again

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved