Ubuntu Installation :: 10.4 - Greeted With A Blank Screen With 6 Blinking Dots After Upgrade
Mar 21, 2010
Neomagic 256ZX(I think) video card, 256 MB RAM Well, after the upgrade went fine, I rebooted and was greeted by a purple 10.4 screen, after which I was greeted with a blank screen with 6 blinking dots. I don't know if this is a new video driver failure (its a pretty old laptop, theres no need for new drivers) or if its a grub problem. Since I can't get to a grub it goes BIOS>Purple 10.4>nothing and I don't get a terminal login, the laptop is now considered bricked. However I was okay with the install and was wondering if theres a way to fix it.
View 1 Replies
ADVERTISEMENT
Jun 4, 2010
I have installed today Ubuntu 10.4 LTS ..after installation the OS does not boot and just shows blank screen with cursor blinking ...any idea ..I have searched the forum a lot but cannot understand why this is happening ..re-installed twice ..This is AMD64 bit but I am installing the 32 bit ubuntu 10.4 LTS.
View 9 Replies
View Related
Sep 23, 2010
I have installed it from usb as the cd installation failed at the point where you decide which type of installation you want (lamp or samba, etc)the installation completed but when booting nothing happens, only a black screen with a blinking cursor. pressing the shift key or any other keys doesn't work.strangely when i boot from the usb flash drive again (and not from the hard drive) the server does boot and asks for the user name and password!i have chosen the guided lvm partition with 20% reserved for system files.my machine is an athlon xp 2GHz (32bit), 1GB, SATA hard drive, nvidia 6600 graphicsmy guess is that its a problem with grub and lvm.
View 9 Replies
View Related
Mar 11, 2011
1) Burned Ubuntu 10.10 to a disk, When tried to install (Select Install Ubuntu) screen goes blank with dim backlight and a blinking cursor on top. Same thing happens with Try Ubuntu without installing.. 2) Tried on Lenovo T410 and Dell 1330. issue exactly remains the same.3) Tried it on a VM Worksation 6.0, "This kernel requires an x86-64 cpu but only detected an i686 error is popping up". So thought its a Ubuntu x32 an compatibility, hence downloading the 64 bit now. Will burn and check it later.
Brand: Lenovo T410
Intel(R) Core(TM) i5 CPU M520 @2.40Ghz
BIOS: A1674IMS Ver 1.0L
[code]...
View 1 Replies
View Related
Aug 4, 2011
Just curious if there is any sort of issues with Ubuntu and JBOD assignments. I had my 2 500GB hdd's as JBOD through my mobo BIOS/RAID Config and it didn't like it. It installed just fine and showed the hard drives separately. I really didn't think anything of it so I continued on.After the install completed successfully, and I rebooted the system, it came to a blank screen with a blinking cursor and wouldn't continue on. So I tried restarting a few times, no luck. Finally I was like "okay screw this, going to install with no RAID setup or JBOD setup." (had RAID issues last night. rabble rabble) Removed RAID configurations and BAM started right up..S. Semi-new to Linux/Ubuntu. Know the basics and what not, just not some of the more advanced stuff.Edit: Okay, so I restarted my computer and removed my USB drive (which I had installed Ubuntu from) and it didn't boot. So it was NOT an issue with JBOD. Guess I'll look for a resolution for that, though.
View 2 Replies
View Related
Feb 16, 2010
I just replaced my PSU and now my computer is not booting up. To make sure that my new psu is not causing the problem, I put my old one back in but it still doesn't boot up. My system powers on, motherboard led glows, the processor starts running and so does the graphics card. The monitor stays blank though. Nothing shows up on the monitor. Just a blank screen with the monitor led blinking. What could be the problem ? It was working fine before I replaced my psu.
View 3 Replies
View Related
Feb 22, 2010
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2.
I have seen the boot logs and it shows a warning:
Code:
Warning: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/
I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation.
how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
View 7 Replies
View Related
Nov 13, 2010
After installation of Fedora core6, only i can access to Graphical interface(ctrl+alt+F7) only. When i press ctrl+alt+F1 ,F2, etc.only get blank screen alone with blinking cursor. My system configuration is PIII, Intel 810 chipset.
View 1 Replies
View Related
Feb 22, 2010
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2. I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation. Also I am not able to install anything using YUM. It gives the following error:
Code:
[error 14] PYCURL ERROR 6-""
I work behind a proxy.
Please help as to how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
View 1 Replies
View Related
Mar 30, 2011
Trying to hibernate causes a blank screen to show up with a blinking text cursor. I have to force restart to get it working again.
View 2 Replies
View Related
Sep 28, 2010
I have reinstalled the OS a couple times now. Not sure what else to check.(noobie)Its on a RAID 1 controller, so I'm wondering if that has something to do with it
View 2 Replies
View Related
Aug 19, 2009
This is probably not possible, but just wondering, restarted centos 5.2 remotely, hung at shutdown, kvm'ed to see what was hanging it up, control c'ed and then ctl alt del, just trying to kill the process, was brought back to the login screen, but unable to type anything. Alt-f1 switched to a different virtual console, which was just a blank screen and a blinking cursor, but now able to type things. Want to avoid hard shutdown. Is there anyway to force shutdown/reboot the machine from this console?
View 1 Replies
View Related
Feb 27, 2010
I have Fedora12 and it was working fine all through. I Installed Skype yesterday and since it was working, I installed the following using instructions from a blog. These were to install
yum install libXv.i686*
yum install libXScrnSaver.i686*
yum install qt.i686
yum install qt-x11*.i686
yum install libsigc++ libsigc++.i686 qt.i686 qt
Skype started to work well. However, after I rebooted the system, all I get is a blank screen with a blinking cursor. I am able ot get to tty by doing ctrl+alt+f2 but am not sure how to proceed from the above. I also erased the above packages thinking that that might solve. But it hasnot solved the issue.
View 1 Replies
View Related
May 1, 2011
I have a Toshiba Satellite P105. Did the upgrade. Everything went smooth until the reboot. After that the deep black. I am suspecting Nvidia driver. "F" key maneuver brings a flash of the booting process. That is quickly followed by a mosaic screen and a numb computer.
Other than nuking the system and re-installing 10.10 any constructive idea?
View 3 Replies
View Related
Sep 4, 2010
I did an upgrade and now after grub starts I get nothing but a blank screen. I should have left the well working alone. Any suggestions on what to do? I have no terminal, nothing any longer.
View 6 Replies
View Related
Jan 22, 2011
I had a working ubuntu 8.04.x system. I ran the update manager to upgrade to 10.04.1 LTS. Everything seemed to run fine up to the point where it needed a restart. Upon restart, it spews out a stream of log messages, changes the font of the log messages already displayed, and then the screen goes blank and the system does not respond to keyboard or mouse. It appears as if the system is trying to set up the monitor and messes up.
If I ESC into grub after BIOS boot, I have the option of booting two different kernels: 2.6.32-27-generic and 2.6.24-28-generic. The original ubuntu 8.04 kernel was 2.6.24-24-generic(though I did do some updates might that be the 24-28 kernel?).
Booting the 32-27 kernel results in the behavior described above.
Booting the 24-28 kernel produces a stream of log messages that scroll past to fast to read and drops into ash. One of the last messages is: !ALERT /dev/disk/by-uuid/ xxxxxx does not exist -which is true because there is very little in the /dev directory.
View 4 Replies
View Related
Mar 28, 2010
I just upgraded from 9.10 to 10.04 beta and now I get the login screen - but after logging in, all I get is a blank screen with a black bar on top showing just the time on the top right hand corner. If I CTRL+ALT+F1 and reboot using the command line, it restarts showing mythbuntu on shutdown. Im have nVidia GEForce 8600 - is this due the X crashing? I tried all these - no change
Code:
sudo dpkg --configure -a
sudo apt-get install --reinstall ubuntu-desktop
sudo apt-get install -f
View 9 Replies
View Related
Oct 25, 2010
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
View 2 Replies
View Related
Jan 29, 2010
So xorg was acting up, and I went into the Hardware Drivers menu to see if the driver had a problem. The driver was disabled, and could not be activated. I downloaded the new ATI driver. I uninstalled the old one, installed the new one, and ran the config step just like it specifies in the install instructions. Upon reboot, I got a blank screen instead of the login screen.I managed to drop back to the command line and uninstall the driver, so now I'm stuck in ubuntu with one monitor instead of 2.
I'm going to attempt to revert to the old ATI driver (which I still have in my home dir), but I wanted to be sure to get this into the forums before I ruined my GUI again.
View 2 Replies
View Related
Jun 11, 2011
I have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
View 1 Replies
View Related
Dec 15, 2009
I attempted to do the upgrade from 11 to 12 with the Preupgrade Assistant. Unfortunatly something went terribly wrong. Everything went well, excluding the size of partition error, untill the reboot. I did have to remove two previous installs. Now grub gives me an option to upgrade to Fedora 12. When I select this the screen runs code quickly and the screen goes blank with alot of disk activity. Then nothing. Is there a method of recovering this install? I am fairly new to Linux Administration and I am just knowledgable enough to mess things up.
View 1 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Sep 19, 2010
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
View 5 Replies
View Related
Nov 17, 2010
I downloaded the OS I wished to use, loaded it onto a clean 4.0GB drive, everything went as planned. But then I rebooted, and it never booted the file off of the USB. So, I changed the boot options, and tried it again. Now, every time I boot with the drive in, it goes normally and then opens a blank page with only one line of text detailing the date of copyright, something about Linux, etc... And a blinking cursor. Is this normal and I just have to wait for it to load, or is something not being processed? Any information you guys need I can obtain, I'm not new to computers but I am new to changing OS's.
View 1 Replies
View Related
Oct 21, 2010
i did the upgrade thru the update manager but when i rebooted my comp, my computer didnt go pass the black screen with the bar blinking. what black screen im talking about
View 6 Replies
View Related
Apr 30, 2010
I burned and checked the image, but cannot install or upgrade ( I DL both the full and alternate image) Hangs on the Ubuntu screen with the scrolling dots. After this, I tried mounting and running the install from the iso, but since all the files are either .inf or unknown, I don't know how. Next, I tried a trick from the ubuntu site using alt+F2 to run from the iso, and it seemed to work, but now it still tries to DL the updates from the internet instead of just getting them from the ISO. This also happens now if I try to upgrade from the update manager, it keeps asking for the install disk. Is there any way to just use the ISO as though it were a disk? I have been running 9.10 for months with no problems.
View 2 Replies
View Related
Dec 23, 2010
I recently received a HP Pavilion dv9000 that the previous owner swore had some issues with it. I'm not so sure it had issues, but that's another story. Anyways, I downloaded Unbuntu 10.10 and burned it to a disk. The first time I booted up the machine I told it I wanted to try Ubuntu. I then left the machine and came back in 20min or so and it looked like it had successfully booted. However I quickly realized the screen was frozen. So I turned off the machine and decided I'd try again a few days later. Today I booted up the machine and I get to a black screen with Ubuntu on it with five dots below the wording. It freezes on this screen. I've rebooted several times but I keep getting to the same screen before it freezes.
View 1 Replies
View Related
Jan 24, 2011
I have a pretty old acer lap top. I used to run xubuntu on it, then I formatted it and installed freeBSD just to check them out. I tried to install last version of xubuntu then, and I got a message that /dev/../loop0 couldn' d mount or sth then I learned about lubuntu and I tried to installed them but I tried both a dvd and a cd and on both cases after I select language and "install on this machine" I just see a screen with 4 red dots writing "Ubuntu 10.10" that stays like this forever.. and nothing happens. the same if I select to boot from the cd just to check the environment. I then tried a ubuntu-studio dvd I had handy just to see if this would work - and it started installing as expecting, I cancelled it after a while. how to get lubuntu running?
View 4 Replies
View Related
Aug 10, 2011
1. Installed Ubuntu 11.04 32 bit for my 64 bit laptop to run alongside windows 7.
2. Installation worked, but had problems booting - it booted sometimes from the grub menu other times didn't
3. Found no solutions for problem so deleted grub and removed the ubuntu OS from disk management.
Since that time I've been attempting to install the long term support (version 10.04) for a while and nothing's happening. The button to "install" or "try without install" leads me to the ubuntu logo screen with the dots flashing under then a blank screen. The memory stick's light doesn't flash either hence it's not working. I've tried the 32 bit and 64 bit version, downloaded from multiple sources and converted the iso using multiple programs.
I then tried the 11.04 version again in 64 bit but that didn't work so I tried what I did in the beginning, the 32 bit version and it works. It feels a bit like after the first install my laptop only wants to install the 32bit 11.04 version and is a bit racist (can i say that?) to the other versions so completely rejects them. Why?
Is there any chance if I try to use a cd to boot that version and it may work from there?
And if I can't run 10.04 for some weird reason technical or w.e, can someone reccommend me another REALLY good version for a beginner which is easy to install and doesn't have too many problems.
View 8 Replies
View Related
Aug 13, 2010
It is the same drive that I used to install ubuntu, but kubuntu isn't working!
View 3 Replies
View Related
