Ubuntu Installation :: Install 10.04 Desktop But The Screen Goes Black After - Dots - Logo ?
Sep 14, 2010
Trying to install Ubuntu 10.04 desktop (amd64) on this brand new system:
I connected the Dell ST2410 24" Full HD Widescreen LCD to the HDMI port on the ATI card and Windows 7 boots up just fine.
So then I put in the "ubuntu-10.04-desktop-amd64.iso" CD in drive and reboot the system. I see the Ubuntu logo with the dots for a while and then the LCD goes black. The LCD reports that there is no signal from the system. The power light in front of the LCD goes from white to amber. The keyboard stops responding.
I power off everything, remove the Ubuntu CD and reboot the system and it works fine again with Windows 7.
The CD has no problems. At boot time, I checked it for defects and it reports no errors. At boot time, I used this same CD to check the system for memory errors. No memory errors. I used the same CD to install Ubuntu on other systems and had no problems.
The 16X DVDRW Drive has no problems. In Windows 7 it can play CDs and DVDs.
View 5 Replies
ADVERTISEMENT
Dec 23, 2010
I recently received a HP Pavilion dv9000 that the previous owner swore had some issues with it. I'm not so sure it had issues, but that's another story. Anyways, I downloaded Unbuntu 10.10 and burned it to a disk. The first time I booted up the machine I told it I wanted to try Ubuntu. I then left the machine and came back in 20min or so and it looked like it had successfully booted. However I quickly realized the screen was frozen. So I turned off the machine and decided I'd try again a few days later. Today I booted up the machine and I get to a black screen with Ubuntu on it with five dots below the wording. It freezes on this screen. I've rebooted several times but I keep getting to the same screen before it freezes.
View 1 Replies
View Related
Mar 7, 2010
When I try and install Ubuntu 9.10 it gets to the flashing Ubuntu logo, then the screen just goes black. It then says: (initramfs) Unable to find a medium containing a live file system. I also tried the disk on a another computer and it worked fine, and I've installed Ubuntu 7.10 on this computer before without a problem.
View 9 Replies
View Related
Aug 10, 2011
1. Installed Ubuntu 11.04 32 bit for my 64 bit laptop to run alongside windows 7.
2. Installation worked, but had problems booting - it booted sometimes from the grub menu other times didn't
3. Found no solutions for problem so deleted grub and removed the ubuntu OS from disk management.
Since that time I've been attempting to install the long term support (version 10.04) for a while and nothing's happening. The button to "install" or "try without install" leads me to the ubuntu logo screen with the dots flashing under then a blank screen. The memory stick's light doesn't flash either hence it's not working. I've tried the 32 bit and 64 bit version, downloaded from multiple sources and converted the iso using multiple programs.
I then tried the 11.04 version again in 64 bit but that didn't work so I tried what I did in the beginning, the 32 bit version and it works. It feels a bit like after the first install my laptop only wants to install the 32bit 11.04 version and is a bit racist (can i say that?) to the other versions so completely rejects them. Why?
Is there any chance if I try to use a cd to boot that version and it may work from there?
And if I can't run 10.04 for some weird reason technical or w.e, can someone reccommend me another REALLY good version for a beginner which is easy to install and doesn't have too many problems.
View 8 Replies
View Related
Mar 21, 2010
I can't get Ubuntu 9.10 to install... I downloaded ISO image from official web, Then I burn it on blank CD-R using lowest speed available from Nero 6, After that I go to BIOS and change that CD-ROM will boot first; Done. After that i reboot with CD-R, and it boots! Yea!, I press "Install Ubuntu", it goes to black screen with flashing Ubuntu logo at middle of it, After 1-2 minutes i turns black, ouch!, I press "Enter", and there is a error message, something like this...
[Code]...
View 3 Replies
View Related
Jan 24, 2011
I have a pretty old acer lap top. I used to run xubuntu on it, then I formatted it and installed freeBSD just to check them out. I tried to install last version of xubuntu then, and I got a message that /dev/../loop0 couldn' d mount or sth then I learned about lubuntu and I tried to installed them but I tried both a dvd and a cd and on both cases after I select language and "install on this machine" I just see a screen with 4 red dots writing "Ubuntu 10.10" that stays like this forever.. and nothing happens. the same if I select to boot from the cd just to check the environment. I then tried a ubuntu-studio dvd I had handy just to see if this would work - and it started installing as expecting, I cancelled it after a while. how to get lubuntu running?
View 4 Replies
View Related
Dec 31, 2010
I've installed Ubuntu on another PC and most things are great except fore the black screen that you get when you start the PC (just before the Ubuntu Logo). It stays black for 20 seconds. Is there something I can do to make it shorter like on my other PC.
View 9 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Feb 18, 2010
I am using OpenSuse 11.1. When the computer boots, I come to the welcome screen and then I have the screen with the users on the left hand side. One user is selected by default, and the space for the password is in blank. If I do not enter the password immediately, black dots start to appear in the password box as if there was somebody typing a password.
View 5 Replies
View Related
Mar 15, 2010
Once I select Ubuntu 9.10 from Grub, it shows the logo, the logo disappears, a jet black screen shows with 2 horizontal white dashes appear at the top.
I recently uninstalled Firefox 3.6 pre using synaptic to go with the stable Firefox 3.6 installed with the PPA repository that was given in the Ubuntu wiki. It installed and ran fine but when I rebooted, ubuntu wouldn't start.
I went into recovery mode a few times, tried to fix any broken packages and when it said it was fixed, I tried rebooting and the same error occurred. I also tried to use dpkg-reconfigure for the xserver-xorg and then ran startx but x didn't load properly. Some more debugging and a few driver errors came up involving intel so I installed a package which fixed that.
Ran the dpkg-reconfigure again and ran startx. This time x loaded but it was a jet black screen and I had to hold ctrl + alt and hit a few F keys to get back to the prompt.
I understand this could be a xulrunner error so I tried reinstalling xulrunner-1.9.1. I also rolled back my repositories to get the Firefox 3.5 branch and I installed the original Firefox 3.5, ran firefox --version to make sure and I finally have that back installed.
I tried rebooting and running the OS normally, but again it failed at the same point. What exactly should I do next? Yes, I could reinstall but it's such a small problem with maybe 1 or 2 broken packages, is there anyway I can save my current ubuntu system (as I have made countless configuration changes months ago and I do not want to do it again)?
View 1 Replies
View Related
Oct 25, 2010
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
View 2 Replies
View Related
May 20, 2010
I have a problem after installing Debian and running it on my machine. Instead of taking me to a splash login screen, it instead remains a black screen like a console where I type in my username and password, and it remains in this black command line mode beginning ben@ben-desktop:~$. Like it does in a terminal. What can I do to resolve this? This is completely new to me and hasn't happened to me in Ubuntu or Mint. I am familiar with using the terminal for the odd task but obviously I can't use it like this without a visible desktop.
View 14 Replies
View Related
Apr 30, 2010
I burned and checked the image, but cannot install or upgrade ( I DL both the full and alternate image) Hangs on the Ubuntu screen with the scrolling dots. After this, I tried mounting and running the install from the iso, but since all the files are either .inf or unknown, I don't know how. Next, I tried a trick from the ubuntu site using alt+F2 to run from the iso, and it seemed to work, but now it still tries to DL the updates from the internet instead of just getting them from the ISO. This also happens now if I try to upgrade from the update manager, it keeps asking for the install disk. Is there any way to just use the ISO as though it were a disk? I have been running 9.10 for months with no problems.
View 2 Replies
View Related
Jun 2, 2011
I install UBUNTU 1104 on HP Desktop PC, but now it doesnt start. Just appears a Black screen with this msg: Error Code = 1001.
I want reinstall but PC is not reading CD, But the CD drive is working.
I install UBUNTU 11 in other 6 PCs, and work fine.
PC inf.: HP Compaq dc5800 Small Form Factor
I never install Windows on this PC. The original OS was UBUNTU 9.04 and updates.
View 2 Replies
View Related
Mar 21, 2010
Neomagic 256ZX(I think) video card, 256 MB RAM Well, after the upgrade went fine, I rebooted and was greeted by a purple 10.4 screen, after which I was greeted with a blank screen with 6 blinking dots. I don't know if this is a new video driver failure (its a pretty old laptop, theres no need for new drivers) or if its a grub problem. Since I can't get to a grub it goes BIOS>Purple 10.4>nothing and I don't get a terminal login, the laptop is now considered bricked. However I was okay with the install and was wondering if theres a way to fix it.
View 1 Replies
View Related
Aug 13, 2010
It is the same drive that I used to install ubuntu, but kubuntu isn't working!
View 3 Replies
View Related
May 27, 2010
I've been trying to install Ubuntu 10.04 on my Dell XPS 630 but every time i select INSTALL or TRY UBUNTU when booting from the cd, all i get is a black screen with a white blinking cursor. I have tried various options in the F6 menu but nothing has worked. I know the CD is working because I was able to install it inside Windows and dual boot, but I wish to do a fresh install.
View 9 Replies
View Related
Sep 13, 2010
I'm so desperate about my problems with installing ubuntu. I got a Fujitsu Siemens Computer AMD Athlon 64 Processor 3200+ 2.01 GHz and 1,50 gb RAM. I got Windows XP home edition on my computer, but i wanna completely switch to ubuntu.
At first I tried to install it with wubi, but it won't work always the same problem.
Then I tried it with the Live CD and tried demo and not install, but it fails. First there is a purple screen with a keyboard and a little guy in a circle, then there's a _ in a black screen blinking, and after that my monitor goes into standby mode. The CD is still loaded from the harddrive, but nothing happens. It feels like the Screen froze down and I can't see anything, what's going on.
I tried it with just installing, alternate install, but it's everytime the same problem.
View 4 Replies
View Related
Dec 5, 2010
After install I tried to install my video. Which happens to be nvidia and of course after reboot I now get a black screen showing login and password but it will not work I can only get in through recovery. I have a nvidia ge force 9500gt.
View 6 Replies
View Related
Apr 29, 2011
after i installed ubuntu 11.04 and restart .. nothing appear only black screen i think my problem in my vga card ....i have switchable one in my laptop (ATI Radeon HD 5600 /intel )
View 9 Replies
View Related
Jun 11, 2011
I boot from my USB, and when I try to install my screen starts showing a bunch of white words while scrolling, then my screen goes black and my laptop stops running even though it is still on. I have also tried just running it, but the same thing basically happens.
View 5 Replies
View Related
Jan 12, 2010
I burned a copy of Ubuntu 9.10 and decided to use it to build up my little server. All was well initially. The CD booted, the language selection came up (I selected English), then there was the option to Try, Install, boot from first hard-drive, etc. I chose install and figured I'd nuke the original drive since everything that I need is off there. The little Ubuntu logo came up (it was shining/pulsating) for about 5 minutes. This went on for some time (the DVD-ROM spinning the entire time furiously) and then..The screen went black and there was a message saying that there was no input to the monitor (as some monitors are prone to do if you unplug/loosen the cable.) I rebooted, burned new CDs, etc. To no avail!
I have an HP (quite reliable in the past.)
* 2.80 Ghz
* 1 gig RAM
View 2 Replies
View Related
Feb 1, 2010
I have a Lenovo SL510 thinkpad (CPU 1.80GHz / 2GB / 250GB SATA / Intel GMA X4500 / 15.6" HD LED says the website), totally fresh, just got it today. My goal would be to install Kubuntu 9.10 on this machine. When I try the live CD, screen just goes black, after a while it plays what I assume to be the welcome music. If I try the conventional install screen is just black. The safe graphic mode yielded two grey _, one in the 1/5 and one in the 4/5 of the screen.
View 9 Replies
View Related
Apr 30, 2010
I want to make a clean install of 10.04 instead of just upgrading from Karmic.However when I run the boot cd I get the new Ubuntu boot up screen (with the five dots) but after a while I get a black screen and at the same time the cd stops running in the drive.The only thing I can do is pressing down the start button until my computer shuts down.I do get the menu to choose to run the live cd or make a new installation, but whatever I choose, I end up with the black screen.
I'm trying to install on an older IBM Thinkpad R50e, with 500 mb RAM so I figured that it was simply just too old to run the new ubuntu. The strange thing however is that the cd is actually running fine from within my Virtual Machine. This I don't get
View 9 Replies
View Related
Jul 3, 2010
I am installing 10.04 on a HP pavilion. I have downloaded the ubuntu-10.04-desktop-i386.iso (live CD). When I try to boot or install from it, the screen shows the "ubuntu" with the red dots for a minute and then a black screen with no action from the hard drive or the CD drive. I think it should be asking what language I want but presing enter does nothing.I have been using Ubuntu since 2006 and after yesterday's repartition I installed 6.06 from a live CD so I know I can install from a CD.
View 6 Replies
View Related
Jul 29, 2010
I'm trying to make a complete install of ubuntu 10.4 on an old PC.When I boot from the CD, a text screen is displayed: "PhoenixBIOS Utility"
Code:
BIODate: 09/14/99
CPU type:celeron
[code]....
View 3 Replies
View Related
Mar 17, 2011
I recently decided to give Ubuntu another try after a break for a while, and have hit a bit of a road block The live CD booted fine, ran, installed, all flawlessly, so it's now a dual boot with Windows 7. Only issue now is when trying to load the HDD installed Ubuntu, it just hangs on a black screen, no HDD activity light or anything. First up my specs code...
Next, what happens in detail:
Machine posts, loads boot loader with OS options. Whether choose Ubuntu or recovery Ubuntu, it always hangs on black screen straight after that.
Next, what I have tried to fix it so far:
Tried pressing 'e' and replacing the quiet splash with nomodeset, same result with both normal flavour and recovery.
Tried copying the xorg.conf from the live CD filesystem to X11 folder on main system drive. Also tried editing it to try and use generic vesa driver.
View 9 Replies
View Related
Mar 17, 2011
I am trying to do a dual boot of XP and ubuntu. I have 3 hard drives and I plan to put ubuntu on one of them. I have created a DVD from the ISO for 10.10 using programs and methods recommended by ubuntu, and it burned correctly onto the DVD. When I boot with the dvd in the tray the computer says something about linux iso then the screen goes black with a Human=Keyboard symbol at the bottom for a few seconds. Then my screen goes black with a blinking cursor in the top left of the screen. I have let it sit for a while and the PC shows no signs of drives working.Also if I remove it the PC automatically boots to windows.
View 5 Replies
View Related
Jul 19, 2009
why do i get the black screen at install just after when it loads
View 3 Replies
View Related
Mar 2, 2010
I have been using OpenSuse at work for years. My Windows 7 machine crashed on me. Instead of spending the time to fix it, I decided to take the plunge and install 11.2 on my home system. I have 4 one TB drives. My RAID card has a 2x2 1/0 RAID array defined (sdb, sdc, sdc, and sde). A fifth hard drive, outside of the arrary, which is a 250GB drive (sda). It is a software RAID. Here are the partitions I set up in the installer.
On the raid:
1.75 TB on /home
2.01 GB on swap
48.55 GB on /tmp
Off of the raid:
sda1 115 GB /
sda2115 GB /boot
(I know these are really big but I did not want to put any data outside of the RAID) In the final Installation Settings screen, I chose Booting and change from booting from the MBR to the /boot partition. The boot loader type is Grub and the status location is at /dev/sda2. I select Install and it installs without any error message.
After it installs, it restarts and I press ESC to see what is happening. It skips boot.cycle and continues to load to "starting HAL daemon ...done" and then the cursed black screen. I cannot SSH into it. It just sits there and I have to do a hard resest. Once I restart it, it boots into the non-RAD drive I get the follwing error message:
GRUB ..(it went to fast for me to get the rest of it)(hd1/1) message: file not found and I get the option the change the boot options of the Desktop -- openSUSE 11.2 and Failsage -- openSUSE 11.2 . I select e to edit the boot section of desktop and see
root (hd1,1)
kernal /vmlinz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-ST32508...
intrd /initrd-2.6.31.5-0.1-desktop.
I tried changing the root (hd1,1) to 0,1 1,0 2,0, etc with no luck.What do I do? I need to boot into OpenSUSE and finish the cursed installation.
PS: You can tell I work IT with the uber amount of details I put into this
View 6 Replies
View Related
