Ubuntu Installation :: XP With Existing Setup (Partitions) - Error "Setup Did Not Find Any Hard Disks Installed On Your Computer"

Feb 18, 2010

I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:

I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.

View 4 Replies


ADVERTISEMENT

Ubuntu :: Setup Did Not Find Any HD Installed In Your Computer?

Jul 5, 2010

getting this message when trying to install XP."Setup did not find any HD installed in your computer." I have Ubuntu installed on another partition so it makes no sense that XP doesn't recognize my HD.

View 2 Replies View Related

Ubuntu Installation :: Setup Unable To Find Hard Drive

Dec 7, 2010

When I start the Live CD I can see my harddrive and access it. But when I start the setup, it cant find the harddrive and I can not choose it. Ive tryed more than one cd's and another distro (built on Ubuntu). The hard drive works fine, Ive got Windows 7 already on it (help me change back to linux). I know the computer works fine as I once used another computer to install ubuntu on the harddrive and then moved the harddrive to my computer.

View 8 Replies View Related

General :: Ubuntu 10.04 - Cannot Setup GRUB On RAID 0 Setup Disks

Jun 4, 2010

I've been all afternoon trying to install Ubuntu Lucid on my fakeRAID 0 configured (2) HDDs and am unable to set GRUB up. The fake RAID setup is provided by Intel Matrix Storage Manager, it is correctly enabled and the BIOS is also correctly set up -- in fact, I've managed to install Windows 7 with no significant hitch. After struggling with partioning the drives (had to follow advice I found on a very helpful guide online [0]), creating the filesystems AND getting Ubuntu's installer to actually do what it is supposed to do, I now cannot seem to set GRUB up. My system, as it stands, is unbootable at all; via live CD only.

This is how the RAID0 dev is partitioned:
Code:
# fdisk -l /dev/mapper/isw_ecdeiihbfi_Volume0
Disk /dev/mapper/isw_ecdeiihbfi_Volume0: 1000.2 GB, 1000210694144 bytes
255 heads, 63 sectors/track, 121602 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 131072 bytes / 262144 bytes
Disk identifier: 0x6634b2b5 .....

View 2 Replies View Related

CentOS 5 :: Getting "setup: Command Not Found" Error But Setup Is Installed

Jul 5, 2011

I'm trying to use the set application to configure Apache. I'm getting a "setup: command not found" error when I type in "setup" at the command line.

However when I try to install setup with yum, it tells me that setup is already installed.

I'm logged in as root. CentOS 5.5.

View 2 Replies View Related

General :: Can't Find Setup-installed Components?

Feb 6, 2011

I'm installing LoL using Wine and I can't find where setup has put the files. When I type "wine lol.launcher" it says "wine: cannot find L"c:\windows\system32\lol.launcher". For that matter I can't find where the setup program has installed any of the LoL components

View 1 Replies View Related

Fedora Installation :: Disks Mirroring Setup For Failover

Nov 10, 2009

Have been tasked with a couple of Sunfire X2100 that I am slapping Fedora 11 onto for some high profile tasks around the office. Have two drives of the same size in each server and would like to have the two disks mirrored for redundancy. Admittedly I am new at Linux administration and am feeling over my head.

1. Can this be managed during the installation process of Fedora 11?
2. If yes, let me know the step by step please.
3. If no, I take it a cron job of rsync is going to be my best option.
4. Alternatives insights etc.

View 2 Replies View Related

Ubuntu Installation :: Installing Win 7 To Replace XP In Existing Dual Boot Setup

May 22, 2010

I have Win XP installed on one hard disk drive (HDD1) and Ubuntu 9.10 installed on another hard disk drive (HDD2). Win XP was installed first then Unbuntu 9.10 which set up a dual boot menu. Win XP will no longer boot because I changed the BIOS setting from IDE to AHCI. The problem this causes is described at [URL]. The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled. I have read that Win 7 supports AHCI "out of the box" so instead of re-installing Win XP I want to install Win 7 to replace it. I would like to know in advance what installing Win 7 will do to the dual boot menu?

View 3 Replies View Related

Fedora Installation :: Generate A Kickstart File From An Existing Setup ?

Jan 4, 2009

I have recently been given the task of setting up some thirty odd netbooks with F10 and i was wondering if there is a way to generate a kickstart file from the first netbook (my one lol ) that i have setup to our needs so as to use it to create the same install on the rest of the netbooks. i had thought that i could use the anaconda-ks.cfg file in root's home dir but it is not at all representative of the custom package list i chose during the install.

View 8 Replies View Related

Ubuntu Installation :: Setup Is Not Detecting The Partitions?

Nov 12, 2010

I bought the new harddisk so was doing a fresh install of ubuntu (Already installed win7)

But ubuntu setup is not detecting the partitions correctly it is showing 4 partitions but I have 5 (and +1 which is created by win7 of 100mb for system usage)

Setup is showing total 4 partitions and clubing all the partitions together and showing as 785gb and one partition is not detected at all and the other 3 partitions only one is correct 100mb win7 system usage partition.

I have 4 partitions ntfs and 1 partitions exFat, I had created exFat hoping ubuntu setup will detect it as different partition but that is not shown in partitions selection menu.

View 6 Replies View Related

Ubuntu Installation :: Unable To Edit Partitions During Setup

Jan 24, 2010

I can't edit the partitions in the install setup: I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices.The behavior of OpenSuse 11.2 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that in OpenSuse, fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.

GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched. They assure me that it is a "plain vanilla" ("next, next, next" installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.Could it be any awkward problem specific of the motherboard / SATA controller or its drivers?

View 4 Replies View Related

Installation :: Setup The NAND Partitions For S3c6410?

Oct 20, 2010

I am trying to use the Idea6410 board for developing SPI applications.Unfortunately, the software was built using the s3c2410 SPI Drivers instead of the s3c6410 SPI drivers using linux_2.6.24. The problem is that this version doesn't contain a s3c6410 version of spidev. So I built a new kernel using linux-2.6.36-rc8. However, the arch/arm/plat-samsung directory does not contain equivalent methods of setting up NAND partitions.The /arch/arm/plat-s3c24xx/common-smdk.c file contains the following code, apparently an old method, to setup NAND partitions:

Code: struct mtd_partition s3c_partition_info[] = {
{
.name = "Bootloader",

[code]....

View 3 Replies View Related

Fedora Installation :: Error: Could Not Allocate Requested Partitions - Not Enough Free Space On Disks

Jul 11, 2010

I'm trying to install Fedora 13 on my HP dv6 laptop and when I try to use the Use Free Space installation type, I receive a Partitioning Error: Could not allocate requested partitions - not enough free space on disks. Before I started the install, I used the Disk Management utility in Windows 7 to shrink the volume of the C: drive down to 242 GB and leaving 210 GB Unallocated. Here is what the screen looks like when I select Create Custom Layout (also receive the not enough free space error):

Device (sda) Size Type
sda1 199 ntfs
sda2 248,018 ntfs
Free 215,175
sda3 13,443 ntfs
sda4 103 vfat

View 5 Replies View Related

Ubuntu :: 10.10 Installed On A 40gb Hard Drive And Have Setup Arch On A Seperate 160gb Drive?

Feb 12, 2011

i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb

View 6 Replies View Related

Ubuntu Installation :: Missing Hard Drive During Setup?

Jan 28, 2010

I've managed to get a hold of a 160GB drive, which I hope to use as my system drive for a server that I'm setting up. This may be the tip of the iceberg (as it tends to be with me for some reason), but this is what's happening:

I got the drive, which has been used before but has been secure erased, and it's been sea tool-ed so is therefore as good as new. It shows up fine in the BIOS, and GParted discovers it straight away. I then split it into 3 partitions:

A ~10GB system partition - sdd1
A ~130GB storage partition - sdd2
A ~4GB swap partition - sdd3

GParted performs all actions straight away with no issues.

After partitioning, fdisk -l reports the following:

Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2bd2c32a

[Code]....

I've then gone to install Ubuntu. I go through all the major steps, up to where it asks you where you want to install Ubuntu... at which point sdd just doesn't show up at all. It shows sda, sdb and sdc fine, but sdd is nowhere to be seen.

Two things strike me as odd (although I suppose understandable) - Firstly, every partition in sdd mounts fine, but is owned by root. Secondly, each partition has a folder called 'lost+found' with varying amounts of data. There's 662.3MB in the 10GB partition's lost+found folder, and 6.9GB in the 130GB's folder.

View 2 Replies View Related

Software :: Openbravo Installation / Ant Setup And Setup-prerequisites File (don't Remember Exact Name)?

Apr 27, 2011

i am trying to install openbravo on my server.I have installed all the pre-requisites as ANT, JDK(though i installed JRE).

Everything goes fine untill the ant setup and then running the setup-prerequisites...file (don't remember the exact name).

As soon as i issue ant install.source it ends up with some errors..

View 2 Replies View Related

Ubuntu Installation :: 10.04 Setup Process Not Detecting Hard Drives?

Apr 30, 2010

I'm trying to make a fresh install of Ubuntu 10.04 on my system. I have 9.10 correctly setup on what I see here as devsda2. devsda3 does contain /home. devsda1 is for Vista. They are on a 500Gb hard drive. I also have a second 500Gb hard drive, formerly on a raid 0 with the first one, but now independent (raid deactivated from bios). It is here know as /dev/sdb, and contains other 3 partitions. Raid 0 is not hardware, but is an intel fake raid.

I then have other 4 drives, causing me NO problem.

I start live mode of Ubuntu 10.04 with noraid option. When I try to setup Ubuntu, during the process, where it comes to manually select partitions, the two 500Gb hard drives disappears, such that I'm not able to install Ubuntu on what now is /dev/sda2

If I start live mode of Ubuntu without noraid option, I will see the two 500Gb hd as being part of a raid 0, such that I can't use them.

The other 4 hd normally appear in both cases.

View 3 Replies View Related

Ubuntu Installation :: 2nd Hard Drive Not Found In Setup Menu

Jul 9, 2010

I have an old Dell Dimension 2400, currently running winXP. It has a second hard drive attached onto which I'd like to install ubuntu. The drive is visible in My Computer, but when I began the install process, ubuntu didn't give me any option to install on the second drive; it doesn't seem to see it's there. I went into the Setup menu and the drive isn't found there. Does anyone know what I need to do to configure things so that I can get ubuntu onto the second HD?

View 2 Replies View Related

Fedora Installation :: New Hard Drive In Laptop - How To Setup

Apr 7, 2009

I am upgrading my old 40G hard drive to a new 160G one and want to know the best way to set it for use with my system. I currently have a Windows partition which I want to keep & reinstate onto the new drive. Then I want to have another 3 partitions for different distros.

What should I do as a first step when I put the drive in boot off a live CD. I am assuming that I will need to do. If I do a, # grub-install, will this then format the MBR and then create a small partition for /boot. Following that, do I just restore the Windows partition immediately after the /boot partition, and then create new partitions for the distros accordingly.

I would also like to create a seperate swap partition and then install F10. Is there an option in Anaconda to not use LVM (can't remember).

View 5 Replies View Related

Fedora Installation :: Setup Does Not Detect Hard-drive ?

Apr 21, 2010

I got a Western Digital 500GB SATA drive, installed Vista on it no problems and made sure to leave about 120gb of unallocated space when setting up the drive. Went to install F12 via the live CD and it says no drive was detected. If I take the live CD out then it boots into Vista no problems so the drive is definitely connected OK.

I was using the 64-bit version of the live CD so I downloaded the 32-bit version but I have the same problem! The motherboard is an Asus P5QPL-AM if that makes a difference.

View 4 Replies View Related

Hardware :: Two SATA Disks:counldn't Find Partitions In The Second Disk?

Sep 1, 2010

I have two SATA disks, 80G and 1T. Using "df" command we can see the all partitions:

/dev/sda3 6.7G 2.5G 3.9G 40% /
tmpfs 1.7G 0 1.7G 0% /lib/init/rw
udev 1.7G 220K 1.7G 1% /dev

[code]...

View 10 Replies View Related

Debian :: Boot Existing Using Setup CD/DVD?

Jan 22, 2011

Howto start an already installed Debian Lenny using setup CD/DVD, for example if GRUB won't to start it?

View 8 Replies View Related

Installation :: Dual Boot Menu Setup 2 Hard Drives?

Jun 17, 2010

I need a suggestion on setting up a dual boot menu for my setup. I have two hard drives one with WinXP and a second one with CentOS 5.3 installed. I basically moved the hard drive from another identical machine to this one and so I want to setup a boot menu to access either windows or Linux. CentOS already has grub on it.

What is the simplest method of setting up the dual boot menu? I would like something which is easy to administer which I can just ghost over either the Linux drive or Windows drive or disconnect either and have either boot just fine. I don't ask for much do I?

If I have to go through a little process after ghosting over one or the other drives that would probably be ok. We get updated images for this machine and replace the image on the drives with new images, although Linux shouldn't be reimaged, just windows. So the Linux drive (2nd drive) should not be touched normally.

View 9 Replies View Related

Networking :: How To Incorporate DNS Server Into Existing Setup

Apr 8, 2010

I am working on setting up some networking connections here. [URL]. Depending on your router make and model. You can disable the dhcp server on the router if you go to advanced setup and in the dhcp option You should find two radio buttons off and on click off and you will disable the dhcp server on the router refer to your router documentations. I do not wish to disable the DHCP on my router (2wire). I have fixed the router so it assigns static IP addresses - by following the Management and Console Diagnostic" portion on this page: [URL]. There are 7 machines getting IP addresses from the 2wire router. Of the 7, I have configured 4 to have static IP addresses allocated to them by the router.

For example, the domain here is : 2wire.gateway.net
If I have a host named "zazu", and I ping zazu.2wire.gateway.net, I get the right IP address.
I am working with a product (ZIMBRA) that
-> requires for the host to "have MX records".
-> that you get a FQDN when typing "hostname"
-> that you get a FQDN when typing "hostname -f"
Basically, the way it is supposed to be set up is:
ZIMBRA (internal) <----> Kerio Mail Server (Windows) <---> email from the outside world

So, in a sense, the Kerio Mail Server is to forward mail received from the outside world to ZIMBRA and ZIMBRA is to send mail to the Kerio Mail Server to send it to the outside world. From what I see at these links: [URL] And [URL]. You have to set up some kind of DNS server? Why? Don't both the DHCP server and DNS server serve the same thing? How can I incorporate a DNS server into my setup when the 2wire (with DHCP) is working just fine?

View 3 Replies View Related

Red Hat :: Install Redhat 5.4 Onto 5.2 Without Changing Existing Setup?

Jun 15, 2010

Im quite new to Linux so im trying to learn as i go along.

I currently have Redhat 5.2 installed on a server and this has been setup with Oracle 10g Applications installed and configured by the developers at my company.

I have now been asked to install Redhat 5.4 so we can move onto Oracle 11g.

The question i need help with is... Can i update my current Redhat 5.2 with Redhat 5.4 without losing my current setup and configurations?

I have had a search around and found a command called 'yum' but this looks like it is only used to install packages and security updates etc.

View 5 Replies View Related

Fedora Installation :: Installed F On Ati Radeon HD 5145 - Setup Just Hangs Up Some Times

Jun 14, 2010

I have an urgent major problem. I tried to install F8, F9, F10, F11 and F13 live but all gave the same problem, which is I can't install the OS.the problem is Fedora can't communicate with ATI Radeon HD 5145.....the setup just hangs up some times hangs when it tries to run anaconda....

Now F10 X86_64 was installed normally, but after the first reboot.. it gone crazy...and started to display rubbish...going to init 1 and trying to run the GUI I got error server X.

Also ubuntu didn;t work too

My laptop is
Toshiba Satellite L650-10M
Intel CoreTM i3-330M Processor (2.13GHz , FSB:1066MHz , 3MB 2nd Level Cache)
Memory 2,048 MB DDr3 RAM (1066MHz) System Memory
320GB Hard Disk sata
ATI mobility Radeon HD 5145 , 512MB dedicated Up To 2,810MB Graphics
Wireless technologies 802.11 a/B/G integrated Wi-FiTM ;Bluetooth

View 1 Replies View Related

Fedora Installation :: 16 Gb Enough For F11 - Error "Couldn't Allocate Requested Partitions: Not Enough Free Space On Disks"

Oct 24, 2009

Created abt 16.4 gb free space using Disk Management in vista. I read the sticky on installing from the live cd and did accordingly. Whatever Partition i create first (boot or /), it gets done. However, when tryin to create the 2nd partition, i get "Could not allocate requested partitions:Not enough free space on disks." Cant proceed any further.

View 5 Replies View Related

OpenSUSE Install :: Copy Existing Suse 11.1 Setup To New New Hardware?

Jun 16, 2010

I am running Suse 11.1 on a netbook that I would like to free up for work. Since I would like to keep the existing setup on the new machine, I was wondering if there was a process for copying an exisiting installation to new hardware. This will be a desktop system ( Cheapie PIV most likely )

View 6 Replies View Related

Fedora Installation :: Using The F10 Live CD To Setup Software RAID 1 Between 1 Hard Drives For Redundancy & Fstab

Apr 15, 2009

I have been battering with FC10 and software RAID for a while now, and hopefully I will have a full working system soon. Basically, I tried using the F10 live CD to setup Software RAID 1 between 1 hard drives for redundancy (I know its not hardware raid but budget is tight) with the following table;

[Code]....

I set these up by using the RAID button on the partition section of the install except swap, which I set-up using the New partition button, created 1 swap partition on each hard drive that didn't take part in RAID. Almost every time I tried to do this install, it halted due to an error with one of the raid partitions and exited the installer. I actually managed it once, in about...ooo 10-15 times of trying but I broke it. After getting very frustrated I decided to build it using just 3 partitions

[Code]....

I left the rest un-touched. This worked fine after completing the install and setting up grub, reboot in to the install. I then installed gparted and cut the drive up further to finish my table on both hard drives. I then used mdadm --create...etc to create my RAID partitions. So I now have

[Code]....

View 2 Replies View Related

Red Hat / Fedora :: Firewall - Transferring Existing Setup To Open Source Platform

Feb 5, 2011

Currently I am working on one project in which I am transferring existing setup to Open Source platform. I am having brand new IBM server with two NIC card and want to setup Firewall. I am searching for good solution which suits to me. Which firewall system I should go for? I am thinking of IPCop.

1) Firewall should support OpenVPN
2) Easy to manage for Resident technician
3) Should be block streaming, facebook and others sites.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved