Ubuntu Installation :: Changing The Dual Boot Setup?
Mar 3, 2011
I currently have xp installed on the 1st partition and Ubuntu installed on the 2nd.Both partitions are on the same drive.(Being the 1st drive)I have just purchased a new case and some other components and wish to take the opportunity to change my current setup so that xp is on the 1st drive (alone) and Ubuntu on the 2nd drive (alone) Using clonezilla, I take a backup of each partition separately.I then copy back the xp partition to the 1st disk. I then copy back the Ubuntu partition to the 2nd disk.I gather at his point i run the live Ubuntu cd, open a terminal and run sudo update-grub.
View 2 Replies
ADVERTISEMENT
Aug 4, 2010
I have created 5 partitions:2 GB ext320 GB ext310 GB ext320 GB ntfs400 GB ntfsI have already installed XP on 20GB ntfs. Will dual boot work if I use the 3 ext3 partitions to install Ubuntu?
View 4 Replies
View Related
Jan 2, 2011
I have a windows 7 machine and installed ubuntu 10.4 32 bit in its own partition. I want to replace the 32 bit ubuntu installation with a 64 bit installation. I downloaded the 64 bit version, booted up on the install cd, and started the install. I got as far as the partition set up before chickening out. I was going to use the manual partition option, select the existing ubuntu partition, reformat, and install. I chickened out because i was afraid that this would also reinstall the grub boot loader without the dual boot option disabling my ability to get into win 7. How should i proceed so that i can replace the existing 32 bit ubuntu with a fresh 64 bit install and still be able to boot into win 7?
View 4 Replies
View Related
May 20, 2009
how to install fedora on a hdd that already has xp sp2 and setup a dual boot.
View 2 Replies
View Related
Jan 27, 2010
I am planning to move my main OS from Windows to Ubuntu (Yeah I am that impressed) but I wish to move windows to my current smaller hard drive until I find all ubuntu replacement programs i can use then eventually eject the windows drive. The problem is has we all know who dual-boot you have to install windows first before ubuntu as the windows mbr is when grub is stored and gets wiped when you install windows.
It must be possible to add windows as secondary OS while keeping / or reinstating grub must it not it surely (eg on 10.4LTS release it would be ok, but if i installed windows vista or 7 on my secondary hardisk it would destroy grub).
View 9 Replies
View Related
Apr 16, 2010
I have always use dual-booting vista--ubuntu, I am getting bit tired of windows, so I want to install ubuntu, specially lucid is coming soon. I want to have the possibility to install windows in case I will need it in the future, like working with Visual Studio, ubuntu always detect if windows is installed, if windows is installed first, does windows also detect if ubuntu is installed ?
View 8 Replies
View Related
Nov 26, 2010
I'm thinking of dual-booting Ubuntu 10.10 and Arch Linux. It seems that I'll have to do some editing of the grub.cfg file, but I have seen numerous warnings not to do so. After a bit of poking around, I've heard about a script that does the editing for you built in to Linux (or maybe just Ubuntu).
My questions are:
- If the aforementioned script does exist, how do I use it?
- else if it doesn't exist, how do I not directly edit grub.cfg?
View 1 Replies
View Related
Jan 1, 2011
i have an acer aspire one with a 250 gb hdd the hdd is currently partitioned into two parts part 1 - 85 or so gb, has windows installed part 2 - the rest which is currently unallocated. i am trying to install ubuntu so that each has its own section and will dual boot once in the ubuntu installation window, how do i set up the partition to achieve this? i am trying to install ubuntu 10.10 netbook
View 4 Replies
View Related
Jan 24, 2009
I just got a 1.5 tb I want to do a dual boot fedora 10 and vista. I don't have vista now. Can I install fedora 10 on a 200 gig partition and install vista on the rest when I buy it later?
View 3 Replies
View Related
Sep 18, 2009
How to correctly install F11 on the same disk as Windows. I have created the partition but can't tell what F11 install to use to setup as dual boot with Windows XP Pro 64bit.
View 2 Replies
View Related
Dec 6, 2010
Windows 7 is first boot disk. Installed Fedora 13 on second disk from DVD. During installation it did not ask if I wanted dual boot. Fedora installed fine on second disk. Rebooted and only Windows will lood. How to setup to dual boot? Can I modify Windows Boot file? or do I have to install Grub on to sda. How do I do that?
View 2 Replies
View Related
May 22, 2010
I have Win XP installed on one hard disk drive (HDD1) and Ubuntu 9.10 installed on another hard disk drive (HDD2). Win XP was installed first then Unbuntu 9.10 which set up a dual boot menu. Win XP will no longer boot because I changed the BIOS setting from IDE to AHCI. The problem this causes is described at [URL]. The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled. I have read that Win 7 supports AHCI "out of the box" so instead of re-installing Win XP I want to install Win 7 to replace it. I would like to know in advance what installing Win 7 will do to the dual boot menu?
View 3 Replies
View Related
Jun 4, 2010
I have the following PC set up:
Dell 8400 with 3 GB of RAM with 3 160 GB SATA drives:
The first one has Windows XP installed on it.
The second one has been newly formatted and Ubuntu 10.04 has just been installed on it (20 GB / and 6 GB swap) with grub being installed on the first partition and not the master boot record. The remainder will be for storage for Windows.
The third drive is simply storage for Windows.
At this point I am able to boot XP just fine, but I'm not able to boot Linux. I just getting a blinking cursor or the PC just reboots when I choose Linux. I believe I have set up my boot.ini properly using:
C:Bootsectc.lnx="Linux Ubuntu"
After running dd if=/dev/sdc1 of=bootsect.lnx bs=512 count=1 and putting that file in place.
For reference, I don't believe this is a Linux problem, as much as I am simply trying to guide the ntldr to be properly pointed to a place where it can boot Linux. When I go into the bios and disable the first and the third hard drives, grub pops right up and I'm able to boot Linux with no problem, so that piece is fine. I think it's just now trying to get the correct syntax so I can boot Linux without having to disable drives and reenable them.
For kicks I even tried these syntax types in boot.ini:
multi(0)disk(0)rdisk(1)partition(1)="Linux11"
(i.e. 2nd disk, 1st partition ...etc...)
I read many troubleshooting documents on dual booting and so forth but I just can't get this right. For reference, I stated the way XP views my Hard Drives in the intro, which seem to be a different order than Linux sees them, yet I believe I've tried all the combos of settings for this to work (yet clearly have not). I have attached the output of boot_info_script*.sh here: [URL]. Boot Info Script 0.55 dated February 15th, 2010 ..... Devices which don't seem to have a corresponding hard drive.
View 9 Replies
View Related
Oct 11, 2010
I'm trying to setup a dual boot of windows 7 x64 and Ubuntu 10.10 i386. Before I got windows 7 and the new graphics card it ran 9.10 perfectly. If I take the card out (Nvidia 8800 Ultra), it will install fine but when I put the card back in, it crashes. It appears that it just doesn't like the card.
View 3 Replies
View Related
Jan 2, 2010
Usually I have no problems with linux but with fedora it didnt automatically set up the dual boot with vista. I cant remember how to set up grub to boot vista, how to set this up.
View 1 Replies
View Related
Jun 17, 2010
I need a suggestion on setting up a dual boot menu for my setup. I have two hard drives one with WinXP and a second one with CentOS 5.3 installed. I basically moved the hard drive from another identical machine to this one and so I want to setup a boot menu to access either windows or Linux. CentOS already has grub on it.
What is the simplest method of setting up the dual boot menu? I would like something which is easy to administer which I can just ghost over either the Linux drive or Windows drive or disconnect either and have either boot just fine. I don't ask for much do I?
If I have to go through a little process after ghosting over one or the other drives that would probably be ok. We get updated images for this machine and replace the image on the drives with new images, although Linux shouldn't be reimaged, just windows. So the Linux drive (2nd drive) should not be touched normally.
View 9 Replies
View Related
Mar 20, 2011
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
View 4 Replies
View Related
Nov 28, 2009
I have a computer with windows xp on it, and i want to dual boot with fedora 11. I have 2 hard drives in it, 1 500gb HD and 1 350gb HD. the 350 isnt much concern b/c its just sitting there all free and unpartitioned right now. Now my 500gb is split into 3 partitions, a 20gb(with xp installed on it) a 105 gb with pretty much nothing on it and a 350gb with all my data.
My problem is I'm trying to resize my 20gb partition through the fedora 11 installer and when I tell it to resize say to 10gb it starts and fails the resize. its a NTFS partition and the windows stuff on the partition is only about 8gb. any idea whats going on? the only error I get is "The resize has failed"
View 3 Replies
View Related
Jun 17, 2010
Here's my current setup:
Disk 0 (500GB): Windows Vista
Disk 1 (1TB): Windows 7
Disk 2 (160GB): Ubuntu
My boot disk is Disk 0. Currently when I turn on the PC, GRUB loads from Disk 0. I can then choose either Ubuntu or Windows Loader. If I choose Windows Loader (also located on Disk 0), I can choose to load Windows Vista or Windows 7. I like this setup, but I would like to move the loaders (exactly as they are) to Disk 1 so that I can format Disk 0.
View 1 Replies
View Related
Feb 16, 2010
I have a desktop computer that is currently running WinXP home edition - it has a 40Gb drive that is unpartitioned, so XP has the run of the house, so to speak. I would like to set that computer up to be a dual boot between XP and Ubuntu Studio - how can I do this?
I tried searching the forum but wasn't able to find anything exactly like what I wanted to do - please let me know. I have a DVD of Ubuntu Studio 9.10 and if someone could walk me through this, that would be great,
View 2 Replies
View Related
Jan 28, 2010
have been trying to setup a dual boot system with ubuntu and XP running side by side on my Thinkpad T41.tried it a few times and always causes the same problem. i have 40 gig HDD, on which i create a 13 gig NTFS partition and leave the rest as free space. then install XP on the NTFS partition. no problems.
then i boot from the ubuntu disk (9.10 Karmic) and install using the "use free space" option at the partition section. ubuntu installs ok, and boots fine from GRUB 2.0. BUT when i select the XP option from GRUB's list, it starts to boot XP, i get the standard XP loading screen for three seconds and then it crashes to a blue screen critical problem, and restarts the system. when i then boot from the xp cd and go into recovery mode CHKDSK will not recognise the disk, and DISKPART shows one HDD at 35 gig which it cannot access.
this means i cant run FIXBOOT and get my xp install running again. every time i do this process it produces the same problem. tried at first with xp installed on whole HDD, and reducing the xp partition size. killed XP. then tried ubuntu first and xp second - but this caused the same inaccessible disk problem - xp would not recognise the partitions and would not install. so i slipstreamed my XP install disk to SP2 hoping this would make it recognise the partitions, but no luck there. so had to format all and repartition the 13 gig NTFS for xp. installed xp again without difficulty but ubuntu install killed my xp in the same way.
View 9 Replies
View Related
Mar 17, 2009
I have 2 screens connected to my nVidia 8400GS and would like to change my video card settings so that the system boot shows in the Digital screen and not in the Analog one.
View 3 Replies
View Related
Jan 8, 2010
how to set up a dual boot. I know that I have to partition the drive but at the moment Ubuntu is taking up the whole drive, so would i still be able to partition without loosing anything?
View 6 Replies
View Related
Jan 24, 2010
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
View 3 Replies
View Related
May 10, 2010
I recently installed Ubuntu and I am dual booting it with Windows 7. I showed it to my friend and he likes it. He wants me to dual boot his computer with Ubuntu, also.We were wondering if there was a way to configure GRUB and that stuff so that it doesn't go to the GRUB boot screen when you start your computer where you pick an OS. We were wondering if you could set a default OS that the computer automatically booted to, unless you press a button at startup, and then you could get to GRUB to pick a different OS.
The reason being is because his whole family uses the computer, and we don't want to confuse them with GRUB every time they start up the computer. We just want the computer to boot to Win7 by default, but being able to boot into Ubuntu if you press a button to get to GRUB when booting.
View 3 Replies
View Related
Jul 2, 2011
I bought my wife an HP Mini [URL].. and want to get Ubuntu Netbook running on it. It comes with Windows 7 Starter, which we want to retain because Netflix won't run with Linux (gives you some BS error about "your browser is compatible, but your OS isn't"). So, I'd like to dual boot.
My desktop right now runs Kubuntu, and then I can boot in XP using VirtualBox OSE. Owing to the fact that the netbook is down on power relative to my desktop, doesn't seem like a good idea on the netbook, hence dual boot. I've seen a lot of "help, I just screwed this up!" threads, and since HP wasn't kind enough to send along a disc with Windows 7 on it, I need to get this right the first time. So, I'm going to post what I'm planning to do, let me know if I'm going to mess this up. I've compiled the below looking through a bunch of previous threads.
1) Defrag Windows drive
2) Use Windows 7 software to shrink the Windows partition
2b) Do NOT create a new partition using Windows software, just keep it unallocated
3) Boot off of USB key with Ubuntu in it, select unallocated space for install
Questions:
1) When I boot the computer up, I should get a GRUB screen asking which OS I want to boot into, correct?
2) I'm downloading 11.04 right now...anything to watch out for?
3) I couldn't find an install file for Ubuntu Netbook, do I make that selection during the install?
View 5 Replies
View Related
Sep 1, 2011
just spent hours trying to set up a dual boot with windows 7 and ubuntu. i now have both installed, however, i dont know how to load ubuntu. it automatically loads windows 7 on boot.
p.s both 64 bit if that matters.
View 3 Replies
View Related
Feb 18, 2010
I just bought a Dell 537s machine and configured it for dual boot of Windows 7 and Kubuntu 9.10. On my old dual boot machine I had the Windows System and the Linux System on different disk partitions. That way I could write fstab in such a way as to make the Windows System read-only as seen from Linux, so Linux couldn't mess up any Windows System files (and since Windows can't read ext3, Windows couldn't mess up the Linux System).
But the new machine came with Windows 7 installed and gobbling up 3 primary partitions. Kubuntu installed itself in such a way that Linux can read/write to the Windows System. This makes me nervous that Kubuntu might be able to mess up Windows 7.
Is there any way to make specific Windows 7 directories/files unwriteable as seen from Linux without altering their behavior in Windows 7?
View 1 Replies
View Related
Mar 7, 2011
I 'm currently using grub to dual boot Windows Vista and Ubuntu 10.10.These are some of my partitions:
- one NTFS partition for Vista
- one NTFS partition for my Vista Data (shared with Ubuntu)
- one ext3 partition for Ubuntu (mounted at /)
- one very large ext3 partition for my Ubuntu home folder (mounted at /home)
I would now like to add Windows XP to this setup, but I am not sure where to start.I know I need to somehow shrink the large ext3 partition so I have an extra partition for XP, which should be NTFS.Then I assume I need to install XP on this partition, and somehow make XP appear in grub.how to do these things. Can anyone help? Please keep the instructions very basic, do not assume that I know anything.
View 2 Replies
View Related
Jan 8, 2011
I have a laptop running windows vista already and I need to run Red Hat 7.2/7.3 or Fedora Core 1 on there as well. I am in the process of downloading Red Hat 7.3. I haven't done this before so I'm wondering if there are any guides out there that detail how to set this up to dual boot? Is Red Hat 7.3 a better option over Fedora Core 1?
View 2 Replies
View Related
