Ubuntu Installation :: Studio 9.10 64bit To Dual Boot With Existing Windows XP OS?
Jan 29, 2010
I have been using ubuntu for a little while so i'm not a total newbie. But im not very confident with installing the latest verion of ubuntu studio. Previously i upgraded to ubuntu studio through the terminal window from Jaunty. This time i want to do a fresh install via a DVD. I tried earlier but the part im confused about is the partitioning and formatting process. I have 2 hardrives. One of my hard drives has my XP OS on it along with my entire life. So I cant afford to make a mistake. The other has an older 32bit version of ubuntu studio on it.
I have looked online but I havent found much help. What i was thinking of is just unplugging my windows drive, doing a fresh install on the other. But then i wouldnt know what to expect when i boot up and plug in the XP drive.
View 6 Replies
ADVERTISEMENT
Nov 3, 2010
I upgraded from Ubuntu Desktop 10.04 to Ubuntu Studio 10.04 and running a dual boot system with Windows. On the grub screen there are four listings now for Ubuntu. Two recover modes and two ubuntu modes. Is this normal? Going to reboot and see if I can get a picture of it.
View 3 Replies
View Related
Feb 6, 2010
I have a computer running Ubuntu 9.10. I want to be able to dual-boot Windows XP and Ubuntu. I have seen other tutorials but they are for older versions and I am afraid of doing something that does not work on newer versions and losing data.
View 1 Replies
View Related
Dec 18, 2009
I looked through the install FAQ's etc.I thought I saw someone ask about doing this at one point but, of course, I can't remember where.I have a computer with a single SATA drive which runs Ubuntu9.1 I would like to use it in a dual boot machine. Typically I'd install windows first and then add my second drive and install Ubuntu to the second drive. That's how I usually do it.I want to put in a new drive, install windows, then get it to dual boot using this existing Ubuntu disk. I need to get Grub on the windows disk and get the option to dual boot to the existing Ubuntu disk. I think.
Is there a way I could do this without having to start all over on the Ubuntu disk?
View 1 Replies
View Related
Jun 3, 2010
i want to install ubuntu 10.04 on my studio 15 with i5 processor (already having win7 home ) in dual boot mode. i tried to install , it installed , but after restarting from second time onwards blank screen is coming and boot options are not coming , ERROR : no module found and with some values i tried for 4 times but unsuccessful , i did below steps
-my hdd is 320 so i separated 200(for win 7) , 50 (for personal ) , 40 unallocated for linux
-inserted ubuntu 10.04 rc1 CD
- in fourth step when selecting disk , i selected manual option(3rd)
- and i selected 40GB unallocated and formatted to ext4 and selected as root and install
- after reboot in boot options i can see 4 options i selected win 7 and from win7 i restarted
- after that black screen coming , boot options are not coming
View 1 Replies
View Related
Apr 10, 2011
I have a machine dual-booting with a Windows and an Ubuntu installation on it. I want to reinstall Ubuntu on top of the existing Ubuntu installation on this machine so that I have a fresh install of Ubuntu.I don't mind losing all my data on my Ubuntu partition, but I need to keep all the data currently available on my Windows partition.
View 1 Replies
View Related
May 22, 2010
I have Win XP installed on one hard disk drive (HDD1) and Ubuntu 9.10 installed on another hard disk drive (HDD2). Win XP was installed first then Unbuntu 9.10 which set up a dual boot menu. Win XP will no longer boot because I changed the BIOS setting from IDE to AHCI. The problem this causes is described at [URL]. The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled. I have read that Win 7 supports AHCI "out of the box" so instead of re-installing Win XP I want to install Win 7 to replace it. I would like to know in advance what installing Win 7 will do to the dual boot menu?
View 3 Replies
View Related
Feb 16, 2010
I have a desktop computer that is currently running WinXP home edition - it has a 40Gb drive that is unpartitioned, so XP has the run of the house, so to speak. I would like to set that computer up to be a dual boot between XP and Ubuntu Studio - how can I do this?
I tried searching the forum but wasn't able to find anything exactly like what I wanted to do - please let me know. I have a DVD of Ubuntu Studio 9.10 and if someone could walk me through this, that would be great,
View 2 Replies
View Related
Jan 15, 2010
I'd like to install Ubuntu on a second internal hard disk which I'm going to pop in today. I've installed Ubuntu on other computers, but it has always been a clean install (I've overwritten Windows). I was wondering if there are any specific problems to look out for while installing onto a second hard drive? I've searched the forum, and it seems that some have problems with Grub. Are there any ways to avoid that? I should add that I have Windows 7 64 bit on my main hard drive, and would like to install Ubuntu on the second, blank drive.
View 9 Replies
View Related
Aug 17, 2010
Dell Prec T5500 (Xeon E5504) with two 1T drives, 24G ram, NVidia Quadro NVS420 Windows 7 Pro 64 bit was installed first and works fine
SATA 0 is Win 7 Pro 64 bit , 1 NTFS partition
SATA 1 is partioned as follows
8G swap
200G EXT4 mounted as /
800G NTFS
I booted from Ubuntu cd, ran install chose manual partition scheme and set up SATA 1 as above. Grub2 boots into Windows 7 with no problems and I can see/use NTFS partition on SATA1 When I try to boot into default Ubuntu the screen goes black and then loses video signal and nothing happens, doesn't sound like the disk is doing anything. Grub for the linux boot is as follows
recordfail
insmode ext2
set root='(hd1,2)'
search --no-floppy --fs-UUID --set a05...yadayada....b7a
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=a05....yadayada...b7a ro quiet splash
initrd /boot/initrd.img -2.6.32-21-generic
If I boot into Live CD I can mount EXT4 on SATA 1 partition and everything looks fine, e.g the files /boot/vmlinuz-2.6.32.21-generic and initrd.img-2.26.32-21-generic are both there and the UUID of that drive is the same as referenced in GRUB2.
View 7 Replies
View Related
Aug 10, 2009
I need to create a dual boot system consisting of 32 bit Fedora 9 and 64 bit Fedora 9, but I'm unable to go about it. How exactly should I do it?
View 5 Replies
View Related
Sep 26, 2010
New gateway laptop with a 330M nvidia card and windows 7. I partitioned the drive and made a dual boot with the 64bit 10.04. Everything seemed to be running fine. I installed the recommended drivers for the nvidia card (and also ran an update). I rebooted. Now I get the same thing whether in recovery mode, normal boot or even to a liveCD, first ubuntu with the five dots (with an odd green halo around them) then a few screens flash by and then blackness.
None of the f keys do anything, nor does holding shift during the boot and ctrl+alt+anything does not have an affect except ctrl+alt+delete will shut down still. Once in my frustrated button bashing I did somehow get a stretched out window saying there seems to be some graphics problem, from there I did get to a somewhat normal looking desktop. I didn't to do anything then, foolishly thinking I could do it again in the future (for some presumably unrelated reason I could not get online = no updates and no Internet help) I haven't gotten back there since.
View 8 Replies
View Related
Jun 4, 2009
I got a Dell Studio 1555 preinstalled with Vista and it already had 3 Primary Partitions. I needed to install Fedora Core 9 on this machine and to organize my HDD(500 GB)
I had two options:
1) Either to create a fourth primary partition
2) Create an extended partition with a number of logical partitions
I chose the option 2. I want to know if i make some free space by deleting one of the logical partitions, can that free space be used for installing Fedora ?
Also how to proceed with the installation?
View 4 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Apr 30, 2010
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
View 9 Replies
View Related
Dec 20, 2009
This is not strictly a Linux question, although I am interested in any Linux cautions as to what to avoid that could impact my Linux on the computer in question. I have Linux (openSUSE-11.1) setup on dual boot with MS-Vista on a Dell Studio 1537 laptop. My wife is "fed up" with Vista, and has asked that I replace Vista with WinXP on this Laptop. I would like to do this over the Christmas holiday break. The laptop's 1 year support warrantee has expired. can someone explain to me the function of the two Dell /dev/sda1 and /dev/sda2 partitions ?
This laptop was purchased with MS Vista installed, with 3 primary partitions (small /dev/sda1 (called "Dell Utility" ),10GB /dev/sda2 (unknown - appears to be some sort of Dell backup/recovery partition ? ), /dev/sda3 (MS Vista which had the remainder of the 250GB drive, although I have subsequently reduced this to 69GB ).
Again, I note /dev/sda3 is the 69GB MS Vista partition (I reduced it to 69GB when I installed Linux (openSUSE-11.1)). I also believe it may be in /dev/sda3 where I should plan on installing winXP. Currently I have openSUSE-11.1 Linux in /dev/sda4 (divided into extended partitions, with /dev/sda5 (swap), /dev/sda6 (root), and /dev/sda7 (/home) for Linux and it works well. I plan to keep openSUSE-11.1 Linux when Vista is replaced by WinXP Can I remove and merge /dev/sda1, /dev/sda2, and /dev/sda3 and replace them with one partition for WinXP ?
Or am I better OFF keeping /sdev/sda1 (Dell Utility) ? and am I better off to keep /dev/sda2 (some sort of Vista ?? recovery) ? and only put winXP on /dev/sda3 ? Aside from the MBR with Grub being destroyed (when I replace Vista with winXP) is there anything else I need to be careful of wrt keeping my openSUSE-11.1 Linux install on this laptop ?
I've also sent a slightly different version of this post as a question to the Dell Support mailing list. p.s. for information, here is some output from Linux commands showing the contents:
[Code]....
View 2 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Jul 18, 2010
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
View 2 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
Nov 8, 2010
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
View 8 Replies
View Related
Jan 5, 2011
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies
View Related
Oct 19, 2010
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies
View Related
May 14, 2010
I just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen. I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[code].....
View 9 Replies
View Related
Oct 28, 2010
I am trying to run a dual boot system with Windows 7 and an Ubuntu 9.10 installation from a live CD. I am running this on a Dell Inspiron M5030. Both operating systems have installed fine however whenever I run Windows the computer subsequently fails to run Grub upon rebooting and gives the following error message:
Grub loading
the symbol 'ob_bioslgrub?+E?U? Not found
Aborted press any key to exit
The unrecognised symbols are different each time. I have also had (' ') and ('ee*??S ') and ('un'). I cured this initially by reinstalling Ubuntu but after looking at the support documentation have now found that I can cure it temporarily by simply reinstalling Grub using the command:
sudo grub-setup -d /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub -m /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub/device.map /dev/sda
I can then run Ubuntu fine, however upon running Windows again the problem reoccurs and Grub will not run.
View 9 Replies
View Related
Jan 10, 2010
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
View 7 Replies
View Related
Jan 10, 2010
I have a 160 GB hard disk with three partitions (All NTFS):
C: (30 GB) (WINDOWS XP system partition)
D: (60 GB)
E: (60 GB)
I want to install Ubuntu on another drive (D: in this case). I have backed up all my data on D: drive. What are the steps in doing so and does Ubuntu support NTFS? If it does then will I be able to read and move data between all the drives without any problem (while running either of operating systems)?
View 3 Replies
View Related
Jan 18, 2010
I tried to set up a dual boot system on two separate hard drives. I installed Windows XP first (because doing so in past experience has made it easier) on the PATA 20 GB hard drive configured as slave on the first IDE channel. Then I installed Ubuntu 9.10 on the PATA 80 GB hard drive configured as master on the first IDE channel along with an NTFS partition on this drive:
[Code]...
View 4 Replies
View Related
Feb 9, 2010
I can't for the life of me get my GRUB whatever version I have to dual boot these. I've spent over 3 weeks on it and then finally gave up.
But It would be really nice since I have so much software that is solely devoted to windows. Not to mention with my photography stuff it's just a whole lot easier to run everything through windows. But for the general census I do prefer Linux.
I'm running these two operating systems. (although I can't access my Windows 7 because of the boot menu problem) I think that's all that needs fixed but I'm not sure.
Ubuntu 9.10 ( I believe it's 64bit although the "about" doesn't specify) Windows 7 64bit is installed. Currently I only have access to Ubuntu.
View 9 Replies
View Related
Feb 19, 2010
I have ubuntu 9.10 installed and working on a Pangolin Performance system 76 laptop with a 120 gb hard drive. The ubuntu install has 65 GB free at the end of hard drive (done using Fdisk). It is STATA II hard drive. I got a dual boot to work on a upgrade for an HP desktop for my mom so I know the basics. Using the windows 7 OEM home premium I go the first steps i.e. time ect. Then it shows partitions (as 4 seperat objects 1 primary and 3 logical). The 2nd and 3rd are swap and more ubuntu space. The free space also comes up as logical and is the 4th partition. I try to install and says can not use this partition on the hard drive.I press the format and in changes to extention but still gives the same error (error log is not viewable in the install). All a can do is press a formate button in the install no menu. I formatted as NTFS in gparted and it still would not work. I saw posts about bios and XP but they were old.
View 5 Replies
View Related
