Ubuntu Installation :: Installing Dual Boot Windows 7 And 10.04?
May 2, 2010
I installed Lucid Lynx on a dual boot with a previously installed copy of Windows 7 and everything installed fine via Wubi...but now when I boot up and I get to my Boot Mgr and select Ubuntu I get the following message and can not get past a black screen stating -
Try (hd0,0) EXT2
I have tried to read what others have done to fix this but nothing has worked so far,Also I can still log into Windows 7 just fine, just no Linux...
I've recently bought a new computer and installed Windows 7 on it, but left 100GB of space on a separate partition so I could put Debian next to it in dual boot. I have the new Intel i7 950 processor and I run Windows 7 Proffesional 64 bit, so I assumed I had to pick the ia64 debian image. However the CD I burned from the ia64 image didn't boot. (a black screen started and an underscore kept flashing, but nothing else happened)[URL]
I've managed to install i386 Debian on a older intel pentium 4 computer before and that worked fine. I believe I used another application to burn the CD then. This time I've burned the CD with the default Windows CD burn application. I can try burn more CD's but I don't have much left so I want to make sure this is the problem before attempting again. (the burned files on the ia64 CD look exactly the same as the files on the i386 CD, when browsing through the cd files in windows) "If your PC has a 64-bit AMD or Intel processor, you will most likely need the "amd64" images (though "i386" is also fine), the "ia64" images will not work."This seems a bit strange, they recommend me to use the amd64 image if you have a "64-bit AMD or intel processor". I dunno if this is a typo, but it seems weird to me that the AMD-64 Debian version would also work on my Intel machine
I have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
So I finished downloading Windows XP Ultimate (It is real. It's not officially supported by Microsoft) and I expected it to be small like Ubuntu was. I only have a CD-RW drive. I realized the extreme size difference with Ubuntu over 600mb and XPU over 4gb. I know how to modify partitions from the Live CD. I'm wondering if it's possible to install XPU or any version of XP while the operating system is active. It was possible with Windows 98. This might be the wrong place to post, but I really want to dual-boot Windows. Linux is great, but I would like to use SOME of my stuff without WINE.
I have an Asus Xonar DS, and am getting no sound in Windows whatsoever. I'm pretty sure something in Ubuntu is causing the problem as this only started happening after I installed it. I used to get heavily distorted sound in Windows, and now nothing at all. I've tried removing pulseaudio and disabled alsa, restarted ubuntu and then went into Windows, and it didn't help. Sound is 100% fine in ubuntu.
I want to set up my PC so that I have Windows 7 installed on one hard drive and Ubuntu Studio installed on a completely separate hard drive. I currently have both hard drives installed in my PC and the larger one (640GB) has Windows 7 installed and is currently taking up that entire drive. My other hard drive (160GB) has a wubi install of Ubuntu 10.10 on it so it shows up on the Windows boot menu. What I want to do is wipe the smaller hard drive and install Ubuntu Studio on it and have it show up in the boot menu just like my wubi install does.
I need to know things like: 1. When I install Ubuntu Studio, do I install the boot loader to the MBR of the hard drive I'm installing it on? 2. How exactly do I add Ubuntu Studio to the Windows boot loader?
I'm looking for a good partition scheme to install BT4 dual boot with windows 7, I've freed up about 160 G for my install and was going to use BT4 as an everyday distro and wanted enough space to install extra packages like vlc and what not as well as use wordlist.sh to create a substantial dictionary. These are my initial partitioning plans 3G /,6G usr, and about 3G swap with the rest being /home for word lists and whatnot would you mind sharing your partitioning setups so I can make this efficient as possible?
I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
I got to the part where I'm supposed to partition Mint. I've got a 500GB hard drive, and I thought I'd give 300GB to LM--but I'm unclear about using ext2, 3 or 4. What about the swap file? Is that automatic?
i currently am running windos 7 (64 bit) and would also like to install ubuntu on a second hard drive. i understand a dual boot is easy enough to do, but i'd like to install ubuntu so that it and windows are completely isolated. rather than be prompted with a boot screen to choose os, i would do so by changing hd boot priority in bios. i'd like the end result to be 2 separte computers in one box. can it be set up this way, and if so, how?
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
I have been running Ubuntu 9.10 and Win XP Professional as a dual boot system, with each OS on its own HDD, smoothly and seamlessly since the release of 9.10. Yesterday one of my kids got a video file from a friend and it had a virus along with it. Long story short, in the process of trying to repair it Windows shuddered it last agonizing breath.
Now I have to re-install Windows because some of the programs the schools make them use require Windows. How do I go about doing this without damaging my Ubuntu installation? Will re-installing on a second drive affect GRUB?
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
I have a DOS/Linux dual-boot system. After recently replacing the original motherboard (an Elitegroup P6VEM3, of all things!) with a salvaged Dell D300 motherboard, I'm preparing to replace the Red Hat 8 currently installed with a Ubuntu live CD that I've had for some time (but that wouldn't work at all on the old motherboard, for some reason) I have a question about the "partitioner" stage of the installer: I don't know what to do with my 5 DOS volumes. My hard drive is partitioned as follows (from the partitioner's report when I select manual mode; annotations in parentheses):
My dell machine has the following: A raid 0 SAS config with Windows 7 installed in one partition, and ubuntu in the other partition. Then two seperate sata hdd. The raid drive is set as first boot, and Windows views it as disk 0 and boots just fine. When I installed ubuntu 10.04 on the second partition, it viewed the disk as sdc. And when booting off the raid drive,im not given a grub menu to choose ubuntu orwin 7,windows 7 boots all on its own.
I have a desktop Windows PC with three hard drives. Having successfully installed Ubuntu on a laptop I used the same CD image to boot Ubuntu on my desktop machine. All seemed well so I selected the option to install alongside the existing OS. I left the choice of drive as presented by the installer (it was the largest one) and asked for an 80G partition for Ubuntu. The installation went well but when the machine was restarted it just booted straight into Windows. No sign of the bootloader menu. I'm guessing the BIOS doesn't look at the drive where Ubuntu is installed, and the installer did not put the bootloader on the Windows boot drive. The Windows drive is too small to install Ubuntu there.How do I fix this so that I can dual boot, or alternatively how do I get rid of Ubuntu and reclaim the 80G for Windows?
I just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen. I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub.
I am trying to run a dual boot system with Windows 7 and an Ubuntu 9.10 installation from a live CD. I am running this on a Dell Inspiron M5030. Both operating systems have installed fine however whenever I run Windows the computer subsequently fails to run Grub upon rebooting and gives the following error message:
Grub loading the symbol 'ob_bioslgrub?+E?U? Not found Aborted press any key to exit
The unrecognised symbols are different each time. I have also had (' ') and ('ee*??S ') and ('un'). I cured this initially by reinstalling Ubuntu but after looking at the support documentation have now found that I can cure it temporarily by simply reinstalling Grub using the command:
I have Win XP installed on one hard disk drive (HDD1) and Ubuntu 9.10 installed on another hard disk drive (HDD2). Win XP was installed first then Unbuntu 9.10 which set up a dual boot menu. Win XP will no longer boot because I changed the BIOS setting from IDE to AHCI. The problem this causes is described at [URL]. The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled. I have read that Win 7 supports AHCI "out of the box" so instead of re-installing Win XP I want to install Win 7 to replace it. I would like to know in advance what installing Win 7 will do to the dual boot menu?
Dell 600SC running an Adaptec 39160 dual channel SCSI controller which has 2 disks connected to it. The machine also has 2 IDE drives connected to it. The boot order of the disks is set to the SCSI disks as the first in boot order (after CD).
I am trying to set it to maximize performance from the SCSI config so I have XP on the first SCSI and I set up Ub 9.1 on the second SCSI in a dual-boot configuration.
In this set up the machine when rebooting goes straight to XP (on the first SCSI) and does not even see the Ub installation. The installation went fine and no complaints. On the same machine if I just had Ub on the first SCSI - machine boots fine (albeit after a long pause looking for the bootloader).
So with XP on the first disk (which I need to - to have XP) the Ub bootloader does not seem to set the right params to be able to boot.
Again this is with 9.1. Not trying 10.04 as with 10.04 I don't even get to boot even with standalone Ub (with no XP). However it installs fine but does not find bootloader in 10.4, so we will keep to the 9.1 for now. I am however open to working with 10.04 if there is a solution in dual-boot with XP in my config.
So again 9.1 installs fine with XP on 1st SCSI disk, an ub 9.1 on 2nd SCSI disk, but then bootloader does not get activated and machine goes straight to XP.
